Adprep/Domian prep problem

Dear Exper
I've been facing a problem in creating a Windows 2008 Server as a Domain controller for an existing WIN 2003 Domain Controller. I ran adprep/forestprep and adprep/rodcprep successfully but while running adprep/domainprep it prompted an error "Adprep
detected that the domain is not in native mode" and stopped the operation. I checked the raise domain functional level but it was selected as Windows 2000 Mixed. Please let me know if I can change it to Windows Server 2003 and doing this is safe for my
domain or not?
Waiting for your reply.
BEst Regards,
Fish
[email protected]

Glad to here that is worked for you.
Also you can use the Powershell Script for post validation.
Verify ADPrep-Schema, ForestPrep, Domainprep & Rodcprep result
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

Similar Messages

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

ADPREP /Forestprep Language Problem

We are running two domain controllers on our network which are 2012. These have been upgraded in the past from 2008 R2. We are in the stages of getting out domain ready for 2012 r2 Domain controllers.
We are trying to run the adprep /forestprep command as MS websites are telling us to. It is coming back with the problem of
“Can not open adprep.dll.mui”
“Did you fail to copy over the adprep language folders?”
We are running this on the main DC Server and running this as the full Administrator with command prompt running as administrator.
I have been browsing the internet looking for a resolve and not had much luck. Disabled all non windows services, check the language settings and tried
to rename language folder. We are still unable to get any future.
Does anyone have a resolve for this problem please?

Hi,
Is there any error message in the event log? If so, please provide detail information about this error. You could refer to the article below to upgrade the DC.
Upgrade Active Directory from 2012 to 2012 R2
http://www.schmarr.com/Blog/Post/10/Upgrade-Active-Directory-from-2012-to-2012-R2
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
In additional, you could refer to the thread below to troubleshoot the issue:
adprep.exe.mui access problem
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9b3f5ba2-af4b-47cc-bb58-4feaea8dac2d/adprepexemui-access-problem?forum=winserverMigration
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ActiveSync 500 error and Exchange 2007/2013 coexistence

Hello,
We have Exchange 2007, and we've deployed Exchange 2013 and coexistence appears to be working. We have done a small pilot migration of 11 users, and I have 2 of those users that are not able to get iPhone/ActiveSync working. OWA and Outlook access
work without a problem. https://testconnectivity.microsoft.com/ is telling me "The test of the FolderSync command failed." and "Exchange
ActiveSync returned an HTTP 500 response (Internal Server Error)"
The error I'm receiving on the mailbox server event log is:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message: A null value was received for the NTSD security descriptor of container CN=ExchangeActiveSyncDevices,CN=LASTNAME\, FIRSTNAME.,OU=XXX,OU=People,DC=DOMAIN,DC=local.
Most articles I've found with this issue say to confirm that "Inherit parent permissions" is check on the AD object, but that is already checked?
The funny thing is that most of our pilot users don't have this issue. It is only for some of them.
Any help is appreciated.

An update here, I was able to get the 2 pilot user's iPhone/ActiveSync access working by adding the following permissions by hand:
Add Exchange Servers, in Apply onto select
msExchActiveSyncDevices objects (note it's plural) and selecting
Full Control.
Once I did this, my problems went away.
So the big question is why aren't these permissions in place already? Isn't this something that the adprep/domain prep should have taken care of?
Thanks!

How can I clone a completed Exchange Server 2013 in a Lab Enviroment?

I was having great time with my Exchange Server 2013 until I tried to clone it to avoid fresh installation of another Exchange 2013 server. Steps taken
(1)Clone the Exchange1 and turn it off
(2) Brought the Clone Exchange2, renamed it, change the IP configurations,
(3) Re-ran the ADprep/Doamin prep
(4) Checked the ASDIedit to verify the Schema/configuration in AD
(5) Restarted I and was able to logon to the Exchange2
(6) Brought up the Exchange1, but unable to logon because the name was no longer in AD database
What I did to fix this:
(7) Rejoin the Exchange1 to the domain - and was able to logon
(8) Unable to access ECP or OWA of any of the two servers.
(9) Errors received - Fix the configuration file of the application
My Question - How to I fix the configuration file as suggested (via powershell or GUI or ASDIedit.msc)?

Unless you are cloning an entire environment, and then bringing it up in a seperate isolated environment, it is not supported to simply clone an Exchange Server, and then bring it online in an existing environment and rename it to save on setup and configuration
time.
You can script the setup and configuration of Exchange through Powershell, either with scripts or with another product controlling it - something like
System Center Orchastrator.
From the script side of things there are many available on peoples blogs. Check
here.
Edit: and to be clear, there is no need to re-run any prep tasks against Active Directory when installing a new Exchange Server, unless you are installing into a new domain as part of your Forest.
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Does adding a 2008 DC to a 2003 AD break NT 4.0 trusts ?

Hello
we have a AD envionrment with 3 2003 DCs and it has a trust to a seperate NT 4.0 domain.
We are planning to add a 2008 additional DC to the same existing 2003 domain ; it'll require adprep /forest prep switches.
My question here ; does this forest change affect our NT 4.0 two-way trust with 2003 Domain ?
Our domain is running in 2003 forest and domain functional level.

The 2008 box should not affect the trust as long as you have configured
Allow cryptography algorithms compatible with Windows NT 4.0
More on that in this article http://support.microsoft.com/kb/942564
Notice that 2008 R2 will break the trust (no workaround for 2008 R2)
*** Full Disclosure ***
I have not tested your exact scenario (just haven't had the time to build out an NT domain and none of the networks I work on have NT on them at this point)
Thanks
Mike
http://adisfun.blogspot.com
http://twitter.com/mekline

Prepping to upgrade from 10.2.8 to 10.4 -- problem with Disk Utility

I have an 17" iMac that I'm preparing to upgrade from 10.2.8 to 10.4. In preparation, I did the following:
* Mounted a new external HD (LaCie) (my second one)
* Backed-up all personal files / folders to the new drive
* Ran Software Update to check for any recent updates - updated iTunes (6.0.3) + an iPod update
* Ran Disk Utility to repair permissions (which I do whenever I've installed or deteted software) -- Have never had any issues, but this is where my problem started.
Repair permissions hangs at the end (status bar to the very end), and it appears to be working on permissions related to iTunes (sorry, will have to run Disk Utility again and follow-up with the specifics). I ran it twice with the same result.
I saw other threads suggesting that the problem may be with the latest iTunes update (recommending moving the iTunes application folder to the desktop and rerunning Disk Utility), but it seems specific to 10.3. Could this be an issue with 10.2.8 as well. If I can successfully complete repairs to permissions (with the above workaround), can I proceed with the 10.4 upgrade, and if so, what should I do with the iTunes application folder (keep it on the desktop, or move it back)?
Thanks

Cornelius ... thanks for the follow-up. I went ahead and tried both methods, although I should note that I didn't show the iTunes.pkg or iTunesPhoneDrive.pkg files in the Library>Receipts folder as described in the two approaches. I had no luck at all with Kappy's solution (I moved the one file I did have -- iTunesX.pkg -- and Disk Utility stalled as before). I moved iTunes.pkg back to its original folder, and tried the first method you described. I moved the iTunes app to my desktop, and I was able to successfully repair permissions. I trashed two files (iTunes3.pkg and iTunes4.pkg) and left the iTunesX.pkg file as instructed (again, I don't show the iTunesPhoneDriver.pkg file at all). I reran Disk Utility with the same faulty result.
I suspect it may have something to do with the missing files. Any thoughts on that?
Thanks again.
Max:
Sorry I misunderstood you. Actually you don't move
your iTunes folder at all. Here are a couple of
procedures. Since I have not had to use it I can't
vouch for either, but I have heard both have worked
for others.Just to catalogue the
solutions listed above
Here's what I did, and it worked fine.
1) Move iTunes onto the Desktop.
2) Run Disk Utility
3) Go to HD>Library>Receipts and trash all iTunes
.pkg files EXCEPT for iTunesX.pkg and
iTunesPhoneDriver.pkg
4) empty Trash.
5) move iTune from Desktop back to 'Applications'.
Hey presto. you should now be able to repair
permissions again.
HTH
Kappy’s solution
1. Navigate to the /Library/Receipts/ folder.
2. Locate the iTunes.pkg and iTunesX.pkg files and
move them to the Desktop.
3. Run Disk Utility and repair permissions.
4. Move the .pkg files back into the
/Library/Receipts/ folder.Note that you
are not moving the iTunes folder, but the .pkg files
from the Receipts folder. In the first method you
Trash some of them, in the second you move them back.
But you don't touch the iTunes application as such.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X
(10.4.5) Mac OS X (10.4.5) Beige G3 OS
8.6

Problems moving files from old start-up following upgrade prep :(

So I thought I would do a clean Leopard install ahead of moving up to 10.6...
Bought a new 1TB SATA drive, 10.5 installed and updated, all apps installed, no problems. I did create a new user account rather than migrating - sounds silly but I wanted a completely clean slate as I've been upgrading this system and carrying the user account forward forever...
Now I am trying to copy my DTP files across from the previous boot drive and I don't seem to have permissions over them, even though 'Get info' says I do.
E.g. moving them from folder to folder does a copy rather than a move, and more often than not needs a password.
Any got suggestions for the best practice approach to move files between SATAs, when the two drives have different accounts, etc? I am wary of the ACLs, changing permissions and screwing things up...
Thanks v much

If you can you connect both external drives to the computer at the same time, it would be easier to use the "Consolidate Library" utility in iTunes to move (actually copy) your media to the new drive.
1- Open iTunes preferences and select the Advanced tab. Change the location of your iTunes music folder to a location on your new drive. Also select the options "Keep iTunes music folder organized" and "Copy files to iTunes music folder when adding to library". Close the preferences dialog.
2- On the iTunes menu, select Advanced/Consolidate Library. This will gather all your media and copy it to the new location (the folder you designated in step 1).
3- After the consolidation is complete, verify that your music still plays, and check "Get Info" on some items to verify that iTunes is looking at the new location.
4- Optional. Delete the original files on your external drive. Do this only if you are certain that everything copied over to the new drive.
5- Optional. Close iTunes and locate your "iTunes Library.itl" file. This is typically in your iTunes folder, which may be on your computer's drive and not the external drive. Move this file to somewhere on your new external drive. Next, hold the Shift key as you launch iTunes and you'll be prompted to "Create Library" or "Choose Library". Select "Choose Library" and navigate to where you put the "iTunes Library.itl" file. This is a one-time step that tells iTunes where to boot the library from.

Error with adprep /domainprep /gpprep for 2008 R2

While prepping our 2003 forest for 2008 R2, I am getting an error running 'adprep32 /domainprep /gpprep' in one of my child domains. The forestprep ran fine and domainprep ran fine on all of the other (8) domains -- it's just this one that is giving
me fits.
The error is the apparently common "Adprep was unable to complete because the call back function failed." The key lines from the log files appear to be:
[2010/06/11:11:15:53.088]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=a3dac986-80e7-4e59-a059-54cb1ab43cb9,cn=Operations,cn=DomainUpdates,cn=System,DC=sa,DC=convergys,DC=com.
[2010/06/11:11:15:53.088]
LDAP API ldap_search_s() finished, return code is 0x20
[2010/06/11:11:15:53.088]
Adprep verified the state of operation cn=a3dac986-80e7-4e59-a059-54cb1ab43cb9,cn=Operations,cn=DomainUpdates,cn=System,DC=sa,DC=convergys,DC=com.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2010/06/11:11:15:53.088]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=446f24ea-cfd5-4c52-8346-96e170bcb912,cn=Operations,cn=DomainUpdates,cn=System,DC=sa,DC=convergys,DC=com.
[2010/06/11:11:15:53.088]
LDAP API ldap_search_s() finished, return code is 0x20
[2010/06/11:11:15:53.088]
Adprep verified the state of operation cn=446f24ea-cfd5-4c52-8346-96e170bcb912,cn=Operations,cn=DomainUpdates,cn=System,DC=sa,DC=convergys,DC=com.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2010/06/11:11:15:53.213]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: (null)
I have checked all of the known causes of this problem (http://technet.microsoft.com/en-us/library/dd464018(WS.10).aspx) and verified that none of these are the
cause.
When I look at one of the other child domains where this ran, both of those regkeys exist. Based upon the whenChanged and whenCreated attributes, cn=a3dac986-80e7-4e59-a059-54cb1ab43cb9 appers to be a product of this schema change, but cn=446f24ea-cfd5-4c52-8346-96e170bcb912
has a whenCreated date of 12/11/2003 and a whenChanged date of 12/29/2005, which makes me wonder if this key is maybe the product of an earlier schema update that perhaps failed in this domain?
This is driving me nuts. Can someone help? If not, I'm going to have to open a Premier incident and I'd really like to avoid that.
Thanks.
Ed Bell - Specialist, Network Services, Convergys

Hi,
FYI.
On July 1st we will be making Windows Server 2008 R2 General forum read only. After receiving a lot of feedback from the community, it was decided that this forum
is a duplication and therefore redundant of the
General Forum. So, until July 1st, we will start asking customers to redirect their questions to the
General Forum. On June 11th, CSS engineers will move any new threads to the
General Forum.
Please post a reply to
the announcement thread
if you have any feedback on this decision or the process. You can also email
[email protected]
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can
be beneficial to other community members reading the thread. ”

2012 Domain Prep fails in root domain

Hi
We are tryiing to introduce 2012 DCs into our root domain.
The schema has updated fine but the domain prep fails, both on the 2012 server we are trying to promote and whilst running it direct from the infrastructure server itself.
Replication is good and AD itself seems happy enough. The account has the necessary rights.
Any help gratefully received.
Thanks
The error log contains:
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=d262aae8-41f7-48ed-9f35-56bbb677573d,cn=Operations,cn=DomainUpdates,cn=System,DC=xxxx,DC=xx,DC=xx.
[2014/12/08:08:32:53.055]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/12/08:08:32:53.055]
Adprep verified the state of operation cn=d262aae8-41f7-48ed9f35-56bbb677573d,cn=Operations,cn=DomainUpdates,cn=System,DC=xxxx,DC=xx,DC=xx.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/12/08:08:32:53.055]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is DC=xxxx,DC=xx,DC=xx.
[2014/12/08:08:32:53.055]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/12/08:08:32:53.070]
Adprep was unable to modify some attributes on object DC=xxxx,DC=xx,DC=xx.
[2014/12/08:08:32:53.070]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b5, Server error message: 000020B5: AtrErr: DSID-03152A9F, #1:
0: 000020B5: DSID-03152A9F, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9054f (otherWellKnownObjects)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/12/08:08:32:53.086]
Adprep was unable to update domain information.
[Status/Consequence]
Adprep requires access to existing domain-wide information from the infrastructure master in order to complete this operation.

Hi,
If possible,could you please post more detail information about adprep.log?
I noticed that the error indicates the otherWellKnownObjects attribute, it may be related the
Managed Service Accounts container was missing.
In order to troubleshot, please first verify that the Managed Service Accounts container was not exists in the domain.
For more detail information, you could refer to the similar thread:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1a7f9de4-d201-4ac6-a3e7-e396743c31fa/windows-2008r2-adprep-domainprep-fails?forum=winserverMigration
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WEBAS Installation problem on HPUX 11.11

Hi ,
I am running the sapinst present in the "/usr/sap/CD/51030191_NW04_Installation_Master_Oracle/IM2/SAPINST/UNIX/HP11_64" but when i am running that i am getting this error output .
[==============================] | extracting... done!
iauxsysex.c:251: exec(/tmp/sapinst_exe.4557.1100847939/SAPINST) error: No such f
ile or directory
iauxsysex.c:297: child 4558 has crashed. Executable directory is /tmp/sapinst_ex
e.4557.1100847939. Contact Support.
iaextract.c:879: child has signaled an exec error. Keeping directory /tmp/sapins
t_exe.4557.1100847939
aCC runtime: dlmodinfo: Invalid descriptor version 58.
aCC runtime: dlmodinfo: Invalid descriptor version 58.
aCC runtime: dlmodinfo: Invalid descriptor version 58.
I have made all the settings on my hP-ux machine according to install guides and os dependency guides for UNIX . Please help me to come out of this error
Thanks & regards
Akveti Srinivasa rao

I have this problem too.
Although we use AIX now I have one HP N-class server
which will not run SAPINST due to this error.
I have the latest patches and
I have tried three different levels of the aCC++ library
3.50 (minimum required) 3.60 and 3.61.
OSS tells me that this is "always" due to ulimits being too
low. Well I set maxtsize ,maxssize and maxdsiz at the
maximum allowable number (and ulimit to same) to no effect.
HPUX11.11 64bit
cat CDLABEL.ASC
SAP NETWEAVER 04
Support Release 1
Installation Master DVD
Number 51030843
according to pp.37 of the document SAP WEB AS ABAP 6.40 SR1 on HPUX: IBM DB2 Unix/windows Prep &plan dated Jan 20 2005,
the "latest patch" of the C++ runtime libraries is required.

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

We have a problem when we hitting instrumented axis services in weblogic 8.

First we create a domain its only support for axis services.we need to set classpath according to my project.The classpath is going to set in my creating domian name like as "AxisDomain" in that "startweblogic.cmd" file set classpath like
"%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -Dweblogic.Name=%SERVER_NAME% -Div.home=c:/work/build/Java/ -Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE% -Djava.security.policy="%WL_HOME%\server\lib\weblogic.policy" weblogic.Server"
in this we add our classpath like " Div.home=c:/work/build/Java/ ".Then i start the server and deploy the sample axis service war file it contains " server-config.wsdd" file.In that file the following line shows.
<service name="CalCService" provider="java:RPC">
<parameter name="allowedMethods" value="*"/>
<parameter name="className" value="test.chap.calc"/>
</service>
In this sample war works fine.After that used my project and configure the services to getting log file purpose.Then used my project Configure/Instrument the Sample War file.we have config.xml file in our project use that file we configure the sample war file.Configuration is used for added our expected jar like "Handle.jar" file into the deployed services lib folder.Our hadlers are also added into the server-config.wsdd file like
<service name="CalCService" provider="java:RPC"><responseFlow><chain name="HANDLER_JAVA"><handler type="java:org.apache.axis.handlers.JAXRPCHandler"><parameter name="className" value="com.collectors.jt.WebServiceCollector"/><parameter name="endpointId" value="http://localhost:7001/calc1/services/CalCService"/></handler></chain></responseFlow><requestFlow><chain name="HANDLER_JAVA"><handler type="java:org.apache.axis.handlers.JAXRPCHandler"><parameter name="className" value="com.collectors.jt.WebServiceCollector"/><parameter name="endpointId" value="http://localhost:7001/calc1/services/CalCService"/></handler></chain></requestFlow>
<parameter name="allowedMethods" value="*"/>
<parameter name="className" value="test.chap.calc"/>
</service>
Configuration finished after that i want to restart my server that time only redeploy the configured services into the below location :
"C:\bea\user_projects\domains\javadomain\myserver\.wlnotdelete\extract".
Our nedded jar files also added into this location given below:
"C:\bea\user_projects\domains\javadomain\myserver\.wlnotdelete\extract\myserver_calc1_calc1\jarfiles\WEB-INF\lib"
Its not happening in weblogic 8.1.1 and weblogic 8.1.3.
But its not added the needed jar files into the above location in weblogic 8.1.1 and 8.1.3.when i deploy the same configured services that time only its works fine.I don't need to redeploy the service whenever i restart the server that time only i want to added jar files into that location.
This problem is only happening in weblogic 8.1.1 and 8.1.3 its not happening in weblogic 7.5 and 8.1.4 .
In the weblogic 7.5 and 8.1.4 when finished my configuration and restart the server that time its added the jar files into the below location
"C:\bea\user_projects\domains\javadomain\myserver\.wlnotdelete\extract\myserver_calc1_calc1\jarfiles\WEB-INF\lib"
after that i hitted the services using vordel box its working fine and getting log files.
can any one give me a solution to rectify this problem in Weblogic 8.1.1 and 8.1.3.?

forgot to say that I can only use 1 core and it´s not possible/locked to change in preferences/memory and multiprocessing

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

I give up. Have had a problem with HD Bay 4, and can't solve it

I have had my Mac Pro for a year, through Tiger and now Leopard, and it has been a great machine... except. From the night I un-boxed it, it has refused to run a drive in bay 4. it partitions fine, looks fine, and then when copying something (say a 10G folder), it starts fine for about 500meg, estimates about 10 min. All OK. But then it slows down, never gets past about 1 G, and the highest time estimate I have seen is 80 hours, The drive in bay 3 is not affected, though the machine is noticeably slower whenever moving from one drive to another is involved. Removing the drive restores all to normal. But the drive is semi permanently damaged, in that it has something written on it that is very hard to fix. I have been most successful converting it to USB. This has happened over at least 10 drives ( I have lots of spares from old legal work, all SATA 2). I have let this go for this long because I have Apple care, and I didn't need the space. But as I am winding down my working career, and pursuing my photography hobby more, this space is now an issue. I have been reading of "resetting", but nothing I have tried has worked as described, except for the PRAM, which did help another small problem. Before I call Apple care, do any of you have any suggestions? I just hate to send the machine for service if it is something that can be 'reset with something I don't know about. By the way, I used a little adapter to hook up SATA's 5 and 6, and they act the same. So in effect. 1 and 2 are normal, and 3 is ok if there is no 4. Go figure.
Thanks in advance for any consideration, Art Colley in Baton Rouge.

Really sorry for the long paragraph, not my usual way, but hopefully it really doesn't matter, does it?
I have tried service, but my recently opened Mac store will not give me an appointment because they are booked up forever, and they will not allow me to talk to anyone. Didn't tell that part, because it was pretty shoddy, I thought, and really didn't help. Calling Apple care is next on the agenda.
I waited otherwise for the reasons i described, and because I knew I had plenty of coverage.
But your comment, about the SMC button was helpful, if I knew what that was.
As to the specifics, Bays 1 and 2 form a RAID0, currently with 2 500 GB WD's, but that has not always been the case. I have tried non RAID configs just in case, and posted on this forum several times last summer.
All of the drives have been moved around a lot, and all that have been in Bay 4 have had the issue. Currently there is a "rescued" Seagate 750 in Bay 3. Nothing in Bay4.
I also agree about the external drives, using currently 2 eSATA with a PCIe controller, both Seagate, 1TB and 1 750. Also 1 500 WD my book on FW800, and one Seagate 750 on USB.
Then the drives that I would love to use somewhere if I can solve this issue, as I look at them now, and: Seagate 320, originally came with the machine (3), Maxtor 120G (2) from other machines,Seagate 160G (3) from other machines,and a Samsung 160 from my HP workstation.
Except for when they are in the RAID array (and don't report SMART), all of these drives report fine in DU, including SMART, as long as they are not in Bay 4, or in the bay6 (5 and 6 are both Intel SATA controllers, listed in "about this Mac, but hidden on the motherboard). In bay 4 and 6 they report just fine until they are used the first time.
All have been thoroughly prepped before use, as described, and as I said once one is "contaminated" by bay4, I usually have to do it with a temporary USB connection before going back to the SATA hookup. In SATA they will neither erase, nor partition, nor repair and verify.
So that's the long and short of it.
Please tell me more about the SMC button you refer to. I assume this discussion board is the best place to learn about such items, and I thank you for your advise and help. Just remember, I do not know what you know, or I wouldn't be asking. Even some of the abbreviations, though familiar, escape me.
Hope you find this more helpful, because I really do need help, and I have confidence in these discussion forums, having used them in several other fields (both as the helper and the helpee!).
Regards, Art Colley in Baton Rouge.

Adprep/Domian prep problem

Similar Messages

Maybe you are looking for