Advance actions work while in Captivate, but not when Published

Hey,
So I have a button which is suppose to both send you to the next slide and open up a web page in a new window. While in Captivate (5.5), it works, and wonderfully. However, after I publish it...pushing the button does nothing. Any thoughts as to why?

Your Grand Kids" graphic is overlapping the left part of the navbar. Reduce the size of that graphic or move it off the navbar.
OT

Similar Messages

Works fine in debug but not when published

So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
The code:
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
function slideNav(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.DOWN:
   nextFrame();
   break;
case Keyboard.UP:
   prevFrame();
   break;
case Keyboard.HOME:
   gotoAndStop(1);
   break;
case Keyboard.END:
   gotoAndStop(this.totalFrames);
   break;
When I test it using the debug (Ctrl+Shift+Enter) it works fine. When I publish it, the up and down arrows work but the Home and End keys do not work. They do nothing, no error messages, nothing.
Using Flash CS4 Pro 10.0.2. ActionScript 3. Windows 7 64-bit.
Any suggestions?
Thanks.

Nevermind. That was stupid of me. Have to disable the keyboard shortcuts or it doesn't work.

Email button works in preview mode but not when published to PDF

I thought I had cracked everything but - I have set preferences to email results to a specific address. In preview mode this works and outlook is opened with all the details. Once I have published to Acrobat 9 pdf - there is no response to the email button. If I play the SWF file I have the same problem. What am I doing wrong? Using Captivate 5 trial and Acrobat 9.3 Pro.

HI there
You might try adding the location to the trusted locations list as described below:
Click here to view
But i'm guessing you didn't see the link below.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Any idea why .swf works in "simulate download" but not when Published?

Hi,
I have a project where I have a main project which loads external .swfs, and those external .swfs in turn load more external .swfs. In my main project, everything works perfectly when I preview using simulate download, but once the .swf is published it doesn't work properly. I'm assuming is has something to do with my main site Preloader, that's why I posted here. I'm pasting the code here and attaching the latest size report. Any ideas or help is appreciated!
extLoader_mc._visible = false;
var yChange = 109.2;
var yStart = 330.2;
myInterval = setInterval(preload,100);
function preload() {
var current = _root.getBytesLoaded();
var total = _root.getBytesTotal();
var pctLoaded = Math.round(current/total*100);
mask_mc._y = yStart - yChange/100*pctLoaded;
if (current >= total) {
clearInterval(myInterval);
_root.gotoAndStop("Main_1");

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Podcast - works on iTunes page but not when subscribed

Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

Works in preview but not when published in captivate 8?

My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Automator problem--action works OK in Workflow but not in iCal Plug-In

The "Find To Dos in iCal" action works fine when executed from a Workflow within Automator, but fails to produce results when executed as a plug-in from within iCal. Specifically, I'm using "Due Date is Next Week" as the selection criteria and when executed from the workflow all to dos with due dates in the next 7 days are found, but no to dos are found when executed as a plug-in.
I assume this is a Leopard bug, so I've submitted an Automator Bug Report.
Does anyone have a solution or work-around for this problem?

You might get better and quicker feedback from
the
Flash forums.

HTML video works but not when publishing in MUSE

I threw this together without using MUSE - Just a test video that I made in Dreamweaver. The reason why I'm posting this in MUSE as well as DW forum is because maybe I'm not doing the "5" code correctly. anyway --:
http://designerandpublisher.com/html5/video.html
the HTML5 video above plays great on my desktop as well as on my mobile device.
So now, I opened up MUSE and made a test phone web page. I embedded the necessary HTML5 code. The video plays fine on my desktop but will not play at all on my mobile device (Galaxy Note ii). It seems to start, then freezes, then craps out. Here it is:
http://designerandpublisher.com/hawaii/mobile/
What I can't understand is why am I am all of a sudden having problems with MUSE playing video files made for mobile when the original DW test I made works perfectly?
Please advise.

the OGV and WEBM files work fine in the first test. those files are also present in the 2nd test, so why isn't the 2nd playing like like the first one? as for the FLV that's something i can do for mozilla but my main concern is the playback issue with the MUSE test - all works fine in the first example but not in the second.

Html snippet works w/in iweb but NOT when site is live & online @$#!

help!? I have had a flash based slide show working on my iweb site for some time I used iweb enhancer to make it work w/ iweb 06 - now in 08 the "enhancer" doesnt work. The html snippet should & seems to...I am able to get the pages to behave very well while IN iweb the slide shows load while the program is active & when I publish the site to a folder the site works great - UNTIL I upload it and try to view it online THEN it doesnt work properly.
I have a google map snippet that works fine live OR when browsing from the hard drive/folder WHY wont the snippets work when they are uploaded if they work ON my computer?????
site is www.austin-studios.com click on seniors OR children...
-thanks in advance

Phil,
Everything is working fine on my end too. (OSX 10.5.2) Tried your site on Safari 3.1 / Netscape Navigator 9.0.0.3 / Firefox 2.0.0.9 and Camino Version 2007022813 (1.0.4)... each one ran your snippets with out fail
Would emptying cache on your computer help?
Good Luck,
John

Kerberos double hop works internally, but not when published via TMG

Hi all,
Have 2 x IIS 8.5 servers internally with .net applications on them
The IIS servers have been configured to use a domain account for their apppool... and credentials are pass successfully from the front end server to the back end server.
When publishing the front-end server via TMG, the front-end web pages show up fine, but the delegated credentials aren't passed to the "back end" pages and a 401 - unauthorised error is presented.
The TMG computer account has the front end and back end http SPN's defined for delegation in its AD account properties.
Is this expected ? is this a limitation of TMG ? or have I simply done something incorrect ?

Hi,
Please check the following article to see if you missed anything.
About Kerberos constrained delegation
https://technet.microsoft.com/en-us/library/cc995228.aspx
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Background image displays locally in HTML5 template but not when published

I have used an excellent HTML5 template which uses JavaScript to display background images. However while this file works locally it doesn't when published. The site structure is sound and I notice this happens with the source files I downloaded also so it's nothing I have done in my build which could have caused this.
This is the link to my site, everything is fine except the background image not showing.
http://www.khawkinsdesign.com
Any ideas, as I say fine locally, not fine when published?
Message was edited by: Kyle Hawkins

Hi Kyle,
I realise you posted your question a couple of days ago but it looks like your background image issue may now be fixed?
In any case, your site has a few issues. Not sure who told you the template was HTML 5 but they might be yanking your chain. There is nothing HTML 5 about the code used and the DOCTYPE is from HTML 4. As such, some of the code you have used is throwing up errors - some related to the DOCTYPE and some where you haven't closed the tags:
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.khawkinsdesign.com%2F&charset=%28detect +automatically%29&doctype=Inline&group=0
<ul id="footer-nav">
<li><a href="index.html">Home</a></li>
<li><a href="portfolio.html">Portfolio</a></li>
<li><a href="about.html">About</a></li> /*The closing tag is missing in your code */
<li><a href="contact.html">Contact</a></li> /*The closing tag is missing in your code */
</ul>
It would be best to amend the errors but some might disappear when you add the HTML 5 DOCTYPE in to your code. Things like your lack of "type" on the sources is a required v4 attribute, but not in v5.
<!DOCTYPE html>
Have a read through this for more info - this is a great resource for everything HTML 5. http://diveintohtml5.info/
Rik
EDIT:// It seems that the DOCTYPE is the 5 version on all but the home page so you may only have one to correct. However, there are still no HTML 5 elements used to take advantage of the new DOCTYPE.

Folio showing in Content Viewer, but not when published in Custom Content Viewer... please help...!

I shared a folio to review it in the Content Viewer and everything looks ok, but when published (public / free) custom viewer (v24) doesn't show it. What could be the problem?
Thanks, and excuse my english...

I am guessing two things:
1. You created the folio and uploaded to id [email protected] Then you shared with [email protected]
What is the Title id mentioned in DPS App builder. If it's [email protected], it will not work.
2. Do you have multiple folios with the same product id.

Advance actions work while in Captivate, but not when Published

Similar Messages

Maybe you are looking for