Advance not hiting to Budget

Dear Guru
I'm facing One problem
I have one project profile for maintenance of HR activities. i created BASE dept wise,each dept will get the some Budget for HR activities . for ex 10 DEPT is there I created 10 BASE
here scnerio is they are not create the PR Or PO the only Give the Advance against the Dept .after that once they receive the bill they will knock off the advance by FICO entry.but it should consume the budget
now my problem is when ever i'm Giving the Advance against The BASE it is nit hitting to Budget or it is not controlling the budget .it is not showing in the Standard Report Also
pl guide me the Solution . pl help me the solution

Hi
Whenever you are giving advance you are posting entry only to the balance sheet account which doesnt require a cost object like WBS element. Only when you post the expenses, you will be updating the WBS element and it will affect the budget. Atleast if you raise a PO, it will show as comittment against the budget for the WBS element.
Regards,
Lakshmanan Krishnan

Similar Messages

Down payment not hitting WBSE budget

Dear all
i have one business Scenario is like.....
client want to control the budget of HR activities threw project.they have 100 Dept each dept will have some amount to conduct the HR activate . now they want to control the budget throw the WBSE .in project they have 100 WBSE each dept one WBSE.here they will not create PR & PO. they will only do the down payment Request in F-47.it will get approve in F-48.now my prob is when ever i'm doing the F-48 the down payment is not hitting to WBSE budget even not controlling the availability control.even it is not showing in standard report.my requirement when ever i,am doing F-47 it should check the budget in WBSE. when ever i'm doing F-48 it should hit to Actual. can any one explain the solution .i'm looking for the .......

Hi Rajesh,
Down payments or advances against WBS Elements are financial postings....so actually they are not posting against WBS's.
Down payments or advances are not related with budget/availability control.
also refer below links which is relevant with above subject.
https://forums.sdn.sap.com/click.jspa?searchID=26791360&messageID=6106780
https://forums.sdn.sap.com/click.jspa?searchID=26791360&messageID=5393744
Regards,
Sandeep

Exempted cost element not working for budget availability control

Hi,
I have configure the exempted cost element in our sandbox client. In the SAP IMG menu Project System -> Costs ->Budget-> Specify exempted cost element I maintain the following entry.
COAr cost element Origin Group
0200 433010 *
Then in the material master of a material I maintain the origin group in costing 1 view as 001. Then I do a material issue against the network of a WBS in MB1A tr code mvt type 281 and post the cost to the cost element 433010. As per the exempted cost element logic this should not affect the budget availability since the cost element 433010 is define as an exempted cost element. But the system shows actual incurrence for this transaction and reduce that must amount from the budget. I check this is the S_ALR_87013558 report. To re-ensure I do the Project Info database rebuilt in CJEN tr code then activate the availability control in CJBN but this is of no use. The S_ALR_87013558 still shows the budget available as total budget minus the cost incurred in the cost element 433010 in the above transaction.
Please let me know if anybody has configured the exempted cost element in their client and have resolve this issue.
Thanks and regards'
Preetam

Hi,
This is a std SAP Functionality and system should exempt the costs for the cost element maintained in the Configuration for that Controlling Area.
Muzamil

BP671 object currencies are not same in budget hierarchy

Hi,
We have set object curency in budget profile for budget currency and availablitity control.
Although all the wbs, networks and production orders use the same object currency, we are still getting the error "BP671 object currencies are not same in budget hierarchy"
Any solution / ideas to solve this error ?
Thanks,
Manohar

Thanks for your reply.
But i have already checked all three option in Query designer and executed in Bex Analyzer.
once again i am telling -(first time all posted and without posted node are apperaring but after swapping the axis in analyzer sheet only posted nodes are appearing)
Any other option is require for this please tell.

Activation not possible: the budget category 9F is not used in FM area

Dear Friends,
When i am configuration in "Define Activation of availability control" than system is showing below error message.
Activation not possible: the budget category 9F is not used in FM area.
Please advice where i will maintain in the system.
Thanks & Regards,
Pankaj

Hi Pankaj,
Just as a hint, for budget you use ledgers 9A and 9B. In AVC you dont use 9A and 9B, you use 9F and 9G but they are linked together.
BUDGET                   AVC
9A              =              9F       FOR PAYMENTS
9B              =              9G       FOR COMMITMENTS.
You must customize your system to have 9F because it seems to be that you have defined 9A already.
Please follow Eli´s instructions to customize your system.
Best Regards,
Vanessa.

HT4191 I was sincronizing my iPad by using the INFO Section by: Other Sync notes with Outlook Advanced Notes. The result was a huge problem, because it erased the notes in my iPad and added other notes of my commpuerte into my iPad. What can I do to?

I was sincronizing my iPad by using the INFO Section in iTunes when my iPad was connected by: Info>> Other >> Sync notes with Outlook >> Advanced >> Notes.
What I wanted to do, is pass the notes in my iPad to my computer (Outlook) in order to have a backup of that information. Nevertheless, what the sincronization did was eliminate all the notes that I had in my iPad and incorporate new notes from my computer.
Is there any way to restore my old notes? Is there a "trash" in iTunes were I can find that set of notes?
I do not think I have a backup of my iPad, therefore I cannot use that option. Does any one have any solution for my problem??? I would really appreciate some help.

Not as yet, and the proper answer is for Microsfot to update O2011 for iCloud, they have a statement noting that iCloud is not supported (Mail is) but no timetable for a fix.

Actual data is not populated in Budget Fund Check Results for Project Budge

Dear All,
Please help me with the following issue:
1) Create Project Budget integrated to GL Budget (Top Down Integration for encumbrance).
2) Enter Time Sheets through pre-approved batches (we are aware fund check will happen only for Requisition, PO & Supplier Invoices and not for other transactions).
3) Now Actual Cost is updated for the time sheet entered in point number (2) in Expenditure Inquiry & PSI.
4) But the same Actual Cost is not updated in Budget Fund Check Results window (hence funds available is not updated). Navagation: Projects implementation Super User Responsibility
Budget> History> Tools >View Fund Check Results
Please provide us solution why Actual Cost is not updated at Fund check Results window because of this there is a huge impact on funds available.

Hi,
Please check the below for more help
http://www.ncoaug.org/archives/ncoaug_20070613/presentations/2002-Aug/Projects_Koziski.ppt
Rgds
Raghu

FI/CO Costs/Budgets interface to RPM does not transfer released budget

Hi!
We need to transfer WBS Budget data with value type '45' (Released budget) from FI/CO to RPM.
We are using ECC6.0 on one hand and RPM 4.5 on the other.
Unfortunately it seems that the standard RPMFIN_02 interface transfers only budget data with '41' value type.
As far as I can see it seems hardcoded in SAPLRPM_FI_INTEGRATION program (and more specifically in the Include LRPM_FI_INTEGRATIONF02).
There is a BADI (RPM_FIN_INTF) which can be used to enhance the logic of the interface, and I was thinking using CONVERT_BW_WBS_BUDGET method, but the filter on value type '41' is applied before calling the exit, hence it does not help.
Any idea?
Thanks in advance for your reply,
Guillaume

Hello Sasi,
I am facing long time after you same problem and scenario. Could you , please, share the solution found, if still in your mind?
Thanks in advance and best regards,
Pérsio

PID advanced not working after switching on and off

Hello there,
I am trying to simulate the control of an inverted pendulum with the simulation module and the PID toolkit and actually the model runs fine with one problem remaining. When I switch the PID to manual mode and then back to automatic the controller is not able to balance the pendulum to 0 degree like he has done when I started the program.
I have added the project maybe someone has an idea how to get this working because I am not that familiar with these toolkits.
Thanks in advance and best regards
Philipp
PS: I am using two different models in the project but both have the same problem.
Attachments:
Inverted Pendulum.zip ‏767 KB

Philipp,
The problem that you have is actually a common problem for those who try to use PID for this problem.
When you try to use only one PID to control angle, the controller is able to keep it up right in the beginning. However, when you switch the controller on and off (going from automatic to manual), this perturbance will make the cart to move to one direction (adding momentum to it) and the PID will try to bring it back to the center, but it will be far away from the center. If you give time, it eventually will bring back to 0.
In this link below, you have more information about this problem and, most important, tells you that for practical controllers, you can't use static PID for this problem. Maybe you could use gain scheduling PID or cascade PID to also control position also. In general, the LQR controller works pretty well for this problem.
http://www.engin.umich.edu/group/ctm/examples/pend/invPID.html
Anyway, let me know if that answer your question.
Barp - Control & Simulation Group - National Instruments
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Task Status not Showing Cost Budget

Dear All..
Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
I have run Update and REfresh Project Summary....
What could be the reason.. Please help...
Many thanx.

Hi
check the PA periods and current reporting period.
Regrads

Translate not working for Budget rate for different scenarios

I have created 2 new scenarios and the custom4 exchange rates is only working for [None] but not for BUDR, BUDRPY, or CONR.
I can't see anything obvious within the translate rule that affects these new scenarios.
'     =========================
'      (25) Translation
'     =========================
Sub Translate()
     Dim strYear,aC2,aC3,aC4,aC5,aC6,opinp,curr,svt16,op,fxinp
     strYear = HS.Year.Member()
          aC2 = HS.Custom2.List("MVMT_EQ","[Base]")
          aC3 = HS.Custom2.List("MVMT_IFA","[Base]")
          'aC4 = HS.Custom2.List("MVMT_IFA_DEPN","[Base]")
          aC5 = HS.Custom2.List("MVMT_MASTER","[Base]")
          aC6 = HS.Custom2.List("MVMT_INVEST","[Base]")
          opinp = ".C2#OPBAL_INP.C4#[None]"
          curr = ".C4#[None]"
          svt16 =     ".C2#MVT1600.C4#[None]"
          op = ".C2#OPBAL.C4#[None]"
          fxinp = ".C2#FXINPUT.C4#[None]"
HS.Trans "C4#BUDR", "", "A#BUDR", ""
HS.Trans "C4#BUDRPY", "", "A#BUDRPY", ""
HS.Trans "C4#CONR", "", "A#CONR", ""
Both these new scenarios are setup the same as our main Actual scenario as YTD for data input.
We do expand on the translation rule for specific C2 balances for just the Actual scenario for the various balance sheet sections like Equity, Investments to apply specific exch rates for OPE and movements but this should not affect these new scenarios I would not have thought.
Grateful for any assistance.
Thanks
LG
I found another rule that could be where my problem stems from: - halfway down it refers to Budget and Forecast scenarios and my new scenarios are Cashflow and Strategy so do I have to add them here??
Sub copyC4None()
     'Debug
     If Debug = True then
          Writetxt("Debug," & HS.Entity.Member() & ",CopyC4None sub-routine started")
     End If
     'Copy all data for conversion to Budget rates
     dim strReviewStatus,strScenario,strYear,strPeriod,strEntityDefCurrency,strEntity,strView,strDataUnit,myDataUnit,lNumItems,i,lAccount,lICP,lCustom1,lCustom2
     dim lCustom3,lCustom4,dData,strCustom4,lC4Dest,strAccC4Top,sAccount
     strScenario=HS.Scenario.Member()
     strPeriod=HS.Period.Member()
     strYear=HS.Year.Member()
     strEntity=HS.Entity.Member()
     strReviewStatus = HS.ReviewStatus("")
' Copy Entity Currency to Entity Currency and Entity Curr Adj to Entity Curr Adj on the alternate translation members
          'strDataUnit = "C4#[None].V#<Entity Curr Total>"
          Select Case lcase(Left(strScenario, 6))
          Case "budget", "forecast", "budget_final"
               strDataUnit = "W#YTD.C4#[None]" ' changed by sarav on 29-05-2008 from W#Periodic to W#YTD
          Case Else
               'strDataUnit = "C4#[None].V#<Entity Curr Total>"
               strDataUnit = "C4#[None]"
          End Select
          SET MyDataUnit = HS.OpenDataUnit(strDataUnit)
lNumItems = MyDataUnit.GetNumItems
          IF strScenario <> "" THEN
For i = 0 To lNumItems - 1
     Call MyDataUnit.GetItemIDs2(i, lAccount, lICP, lCustom1, lCustom2, lCustom3, lCustom4, dData)
                         sAccount = HS.Account.MemberFromID(lAccount)
                         sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
                         strAccC4Top = HS.Account.C4Top(sAccount)
                         If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
                              For Each strCustom4 In HS.Custom4.List("EXCHANGE", "[Base]")
               If strCustom4 <> "[None]" Then
               lC4Dest = HS.Custom4.IDFromMember(strCustom4)
          Call HS.SetData(0, lAccount, lICP, lCustom1, lCustom2, lCustom3, lC4Dest, dData, False)
          End If
          Next
                         End If
                    'End If
Next
          END IF
Edited by: jamdom on Aug 3, 2011 11:42 PM

I have worked it out - the first issue was the scenarios in the Select Case were not all stated nor were they 6 characters in length
Select Case lcase(Left(strScenario, 6))
Case "budget", "forecast", "budget_final"
now Case "Budget", "Foreca", "Cashfl", "Strate", "Actual"
The second issue was the account list in UD1 - I had to amend the member list to include these new accounts, then in the metadata tag the UD1 for these codes then amend the sAccountUD1 to include this new list
sAccount = HS.Account.MemberFromID(lAccount)
sAccountUD1 = Left(HS.Account.UD1(sAccount),2)
strAccC4Top = HS.Account.C4Top(sAccount)
If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" Then
now If strAccC4Top = "TotalCustom4" And sAccountUD1 = "TB" or sAccountUD1 = "CF" Then
and it works!! Yeh!!
LG

Commitment Item not found in budgeting tables

We are trying to create a special report for our client,whenever we try
to insert the budget data we cannot match some fields included in
diferent tables. We have found fields:"VERSION"(VERSN),"AMOUNT"(VAL0)
but we cannot match this fields with the Commitment Item (FIPEX) field.
We have searched in a lot of tables for example FMIT,FMIOI,FMBL....We really don't know where to look, we are a bit desperate.
Thanks in advance for your help.

Hi,
you can assign the G/L account with the valuation class through transaction obyc.
or you can assign the G/L to commitment item through transaction FMDERIVE.
REGARDS
JASH

System Not Checking Release Budget

Hi
Exports
My cliant using ecc 6 Bcs budget.
When i enter intial budget system automatically treated As availability amt.Here Release not Effected.
I done Budget Release Customization settings.why Release not effect.
For Ex.
Intial budget enter-Rs. 10000 For Commitment budget,Payment budget (FMBBC)Vlaue type-BI Budget,Process- Enter,Bud cat-CB,PB Document type-Budget enter,Budget type-BI(Budget intial)
Execute-FMAVCR01-Consumable budget-10000,Consumed Amt-0,Available Amt-10000.
Now i Release Rs.5000/- Through (FMBBC) for commitment budget and payment budge Value type-R1 Release,Process-Enter,Bud cat-CB,PB,Document type-Budget release,Budget type-Budget Type Release .
System Showing Document posted for budget release but not update in FMAVCR01.
Now i posted F-02 For Expencess jv For 10000/- Document posted.
And also i am using for budget intial and release documents same no ranges.(Maintain Number Range Interval for Entry Documents-01)Same no ranges i assigned in(Define Document Types)
Please any body can help me.
Regards.
Devi.

Dear Devi
you should make it like below
FM Area              ( your FM area )
Control Ledger       ( control ledger )
From Fiscal Year     2011
Version                    Active version
Value Type Selection       Budget or releases according to fund dependent settings ( Choose Blank )
WF Status for AVC    P     Posted budget only
then system will check for the released budget only
you can use the t code FMMPRELE - Release Budget Data to release the budget monthly
i hope this help you
Esam abd elfattah

Funds Management BCS error: Combination ENTR / A1 is not allowed in budget

I just applied Budget Control System in Fund Management module. I use FMBBC to enter budget value. I select BCS value type B1, Process ENTR, Type A1 and enter Fund Center/Commitment Item value. Whenever i tried to save, it always show error Combination ENTR / A1 is not allowed for status ADEC, Budget. Same error with any other combination.
I already assigned budget type and process combination in FM area (Budget Control System (BCS) > Budgeting > Basic Settings > Definition of Budget Data > Budget Types > Assign Budget Types to Processes (Mass Maintenance)
What setting did I missed? Thanks

Hi,
Chech the 'Status' configuration in BCS Budgeting - Control Budgeting Flow - Edit Status.
Regards,
Eli

Not checking the budget for internal order at the time Travel Request creat

Hi All,
I have two issues.
(1) We activated travel managment in our system for public sector germany. In that case we need to create trip directly from PR05 instead of TRIP. I created budget for internal order but its not controlling and checking budget at the time of creation of the trip. We activated fund management also but i need control at internal order level. Please guide me.
(2) While creating trip in PR05 what ever expenses mentioned in Trip it's committing and also i am able to see in fund management commitments report. We extracted reports based on COSP table. This commitment is not updating in this table. Please guide me which table is showing link between internal order and fund management account assignment objects.
Regards,
sree

thanks for your reply.
I maintained Budget profile and Tolerance limits. I am getting error only at the time of posting in PRRW.But i need to control at the time of saving the trip. I can use user exit to control. If there is any standard functionality of checking the budget at the time of saving then it should be good.
For me main problem is i am not able to get report both trip commitments and fund management details. Please inform me in which table internal order and trip commitments are storing.
Regards,
Sree

Advance not hiting to Budget

Similar Messages

Maybe you are looking for