Actual data is not populated in Budget Fund Check Results for Project Budge
Dear All,
Please help me with the following issue:
1) Create Project Budget integrated to GL Budget (Top Down Integration for encumbrance).
2) Enter Time Sheets through pre-approved batches (we are aware fund check will happen only for Requisition, PO & Supplier Invoices and not for other transactions).
3) Now Actual Cost is updated for the time sheet entered in point number (2) in Expenditure Inquiry & PSI.
4) But the same Actual Cost is not updated in Budget Fund Check Results window (hence funds available is not updated). Navagation: Projects implementation Super User Responsibility
Budget> History> Tools >View Fund Check Results
Please provide us solution why Actual Cost is not updated at Fund check Results window because of this there is a huge impact on funds available.
Hi,
Please check the below for more help
http://www.ncoaug.org/archives/ncoaug_20070613/presentations/2002-Aug/Projects_Koziski.ppt
Rgds
Raghu
Similar Messages
-
Use Plan data if actual data is not available(By month)
Hello All,
We have a cube which stores the actual and plan data by month. There will be plan data for all the months of the year in the cube whereas the actual data is only populated for that month at the end of the month. So, there will not be any data for the rest of the months of the year.
QUESTION : Is it possible to create a bex query to show data by month with one key figure which should be Actual data if available in the cube or else the Plan data. I would be able to provide the last month where the data is available to the query in a form of a variable.
Example
Data In the Cube
Month Type Sales
JAN Actual 1000
JAN Plan 750
FEB Actual 1500
FEB Actual 2000
MAR Plan 1200
Query Output
Month Type Sales
JAN Actual 1000
FEB Actual 1500
MAR Plan 1200
Thanks in Advance!
-Vinod Swarnapuri
SAP EPM/BW/BIHi,
in the row you put the month.
in column you have three keyfigures:
- restricted keyfigure r1 : amount with selection actual
- restricted keyfigure r2: amount with selection plan
- calculated keyfigure c1: (r1 ne 0) * r1 + (r1 eq 0) * r2
please test it. It's should be work.
Sven
Edited by: Sven Mader on Mar 5, 2010 10:51 AM -
Data is not populated in List based on custom Query
Hi
I want to query the BO and display only certain instances in a advanced ListPane based on a query condition. But when i bind the custom query to the advanced list pane no data is displayed.
1. Created a Bo PersistForcastBo.
2. In Ti screen of PersistForcastBo add a tab QUALIFICATIONS.
3. Two Advanced List Panes are created in QUALIFICATIONS tab
4.fields of second advancedlist pane are bound to respective fields of Bo.
5.Also an absl action script I created which displays data in the advanced listpane on click of QUALIFICATIONS tab.
6.created a SADL Query in the controller and added the fields required for selection.
6.also created condition in the selected parameter
6. In AdvancedListPane added the default set created., but after the querying the Bo data doesnt display in AdvancedlistPane
Can Anyone Please suggest a solution to this.
Regardshi Fred,
On click of QUALIFICATIONS tab , Eventhandler gets called . In the eventhandler a Bo action is called first which is a absl script- displayforecast, to get all the data . The data in the list pane is populated due to this script. But when i created the query and binded the default set to the listpane the data is not populated
the Eventhandler is called on Click of Qualifations Tab, first action gets called and then eventhandler that executes defaultset is fired . This eventhandler is the handler created when query->defaultset is created
but after firing this query no data is displayed. -
The actual date is not transferred from the (PS) milestone
Hello ,
In an order with header billing plan dates that are value-based, the actual date is not transferred from the Project System (PS) milestone, even though the actual date of the assigned milestone was changed via transaction CJ20N.
We are repeatedly facing this error , I have applied Note number 1395078 but still once in a while I am still facing the issue
Regards
Muralidharan.SCheck the following path in SPRO
IMG - PS - Revenue & earning - planned revenues - Automatic Plan Revenue cal - Maintain Billing Plan Settings
There, you use the billing plan to plan dates on a WBS element whose payment requests or invoices relevant to sales are to be sent to customers.
The system updates the planned revenue and planned payment receipts to the relevant WBS element. The planned revenue is updated using the revenue element stored in the planning profile for the work breakdown structure and using the financial item assigned to the revenue element.
You make the settings given below for the billing plan. To do this, you carry out the following steps:
- Maintain billing plan type
- Maintain date description for billing plan
- Maintain revenue element for billing plan
- Assign billing plan type to project profile
Hope this can assist you.
Thanks & Regards
JP -
The data form form name is invalid. Check log for details
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advanceuser9192499 wrote:
Hi all,
i have just built a planning application from scratch and created my first form.
i have encountered the error "The data form <form name> is invalid. Check log for details "
and i have checked the log file.
It reads as follows
Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled.
An error [1012703] occurred in Spreadsheet Extractor.
Spreadsheet Extractor Elapsed Time : [0] seconds
Spreadsheet Extractor Big Block Allocs -- Dyn.Calc.Cache : [0] non-Dyn.Calc.Cache : [0]
Transaction [ 0x60001( 0x4d8030e5.0xa0280 ) ] aborted due to status [1012703].
User [admin] set active on database [Plan1]
Can any one suggest me how to handle this.
Thanks in advance
ERROR 1012703
*"Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled."*
There is an error in a formula(s), therefore, no calculations will work. The problem is that when you have the outline open in Edit mode and you try to 'Validate', it does not identify any of these errors, nor does it write it to a log. However, you can go one by one and validate each formula. So any time you delete a member or modify a member name, be sure that this member is not included in any formula.
Regards,
Prabhas -
Data is not populating in Idoc To File Scenario
Hi Experts,
My scenario is Idoc To File,
I have developed a scenario and triggered the idoc at outbound, when i check in SXMB_MONI the status is processed successfully, and once i check in destination i am not getting the values, simply one file has come with the name which i have specified in Communicatio channel that's it no data in it. Kindly suggest me the possibilities for getting such a problem. I am confused why the data is not getting populated.
Thanks & Regards,
VenkatVenkat, check ur file receiver communication channel..
a, if it is configured correctly
(runtime workbench->communication channel monitoring)
b, if yes, check your target structure, if it matches the requirements of structure in the receiver comm channel
How it configured ur terget message type?
Peter -
Actual dates should not impact the Network scheduled dates
Hi
I have planned schdeuled dates (Early/latest).
When i am confirming the activity the actual dates get updated
When i schedule the network the scheduled planned dates are recalulated
This should not happen for this client i am working for
The requirement is that the Planned Scheduled should remain fixed and
should only change if duration, relationship etc changes.
I have tried different option to solve this but still no clue
Adjust basic date 1, 2, 3 option
Shift Order
No date Update - this seems to work but not visible in CN22/CN25/CJ20n
Kindly highlight if any of you have come with similar requirement & provided solution to it
Either thru standard functionality, configuration or any development
CheersHi Manoj,
I had the same requirement and able to achieve it by std. settings. Keep in mind that the planned dates wil get changed when you do the final confirmation. You should have the control on the planned dates until the activity get Fianlly confirmed.
psconsultant -
Billing date is not populating into the sales order
Hi Experts,
I am creating the sales orders by filling the IDOC's Segment data from a file. Sales orders are getting created however the BILLING DATE is not getting populated by the date from file instead it is taking the system date.
Segments used are
Header: E1EDK03 016 021 and 026.
Item: E1EDP03 016 021 and 026.
Please help me in this regard.
TIA.
Regards,
Kishore.
Edited by: kishore gaddam on Jul 18, 2009 10:06 AMHi,
Check with function guy , there could be some settings need to be done for getting external date populated in billing date field.
Thanks, -
Configuartion data is not populated using BAPI_SALESORDER_CREATEFROMDAT2
Hi All,
I am using BAPI_SALESORDER_CREATEFROMDAT2 to create the sales order and to add the characteristics for my material in the configuration.
my code for configuration to BaPI
w_order_cfgs_ref-posex = '000010'.
w_order_cfgs_ref-config_id = '1'.
w_order_cfgs_ref-root_id = '00000001'.
w_order_cfgs_ref-complete = 'T'.
w_order_cfgs_ref-consistent = 'T'.
w_order_cfgs_ref-sce = '1'.
w_order_cfgs_ref-kbname = w_sdsales_sap-matnr.
w_order_cfgs_ref-kbversion = '1'.
append w_order_cfgs_ref to i_order_cfgs_ref.
INSTANCE
w_order_cfgs_inst-config_id = '1'.
w_order_cfgs_inst-inst_id = '00000001' .
w_order_cfgs_inst-obj_type = 'MARA'.
w_order_cfgs_inst-class_type = '300'.
w_order_cfgs_inst-complete = 'T'.
w_order_cfgs_inst-consistent = 'T'.
w_order_cfgs_inst-OBJ_TYPE = .
w_order_cfgs_inst-obj_key = w_sdsales_sap-matnr.
append w_order_cfgs_inst to i_order_cfgs_inst.
w_order_cfgs_part_of-config_id = '1'.
w_order_cfgs_part_of-inst_id = '00000001' ..
w_order_cfgs_part_of-obj_type = 'MARA'.
w_order_cfgs_part_of-class_type = '300' .
w_order_cfgs_part_of-obj_key = w_sdsales_sap-matnr .
append w_order_cfgs_part_of to i_order_cfgs_part_of.
*characteristics value
w_order_cfgs_value-config_id = '2'.
w_order_cfgs_value-inst_id = '00000001'.
w_order_cfgs_value-charc = 'VC_MODEL'(025).
w_order_cfgs_value-value = w_sdsales_sap-model.
w_order_cfgs_value-valcode = '1'.
append w_order_cfgs_value to i_order_cfgs_value.
It is creating sales order but configuration data is not getting populated in the sales order item.
Please advise me
Thanks in adv
sangeethahi see this
SAP Note number 774346 -
Info-Object Master Data is not populated using Attribute View
Hi Colleagues,
I have one info-Object 'Resource', compounded with client, resource type and scenario.
I want to fill its master data using an attribute view. In Master data tab, i have mentioned the package and attibute view (SAP HANA MODEL).
Assigned all the attributes to respective fields in attribute view.
I can see data using the 'Data Preview' in my attribute view.
Two issues --
1. Maintain master data option is disabled in the context menu of 'Resource' Info-Object.
2. Also the data available in attribute view is not populating in master data of info-Object ( I tried seeing by creating a report).
Please suggest what is wrong here.
Thanks in advance.
Regards,
RohitHi,
When you are loading data from DSO to IO, seems like some filtering is happening. Just check the active table of DSO and make sure that you have all the 59 records available.
Another important thing is check the primary key of your master data i.e. if there is any compounding attribute if not then records from DSO might be getting overwritten in the master data. i.e. only 6 unique records.
Regards,
Durgesh. -
Bf datasource data is not populating in R/3 side
Hi Folks,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in AdvanceFew sanity checks -
1)From SBIW - Logistics > Inventory > Transaction key > Execute or select the required
352344 - Process key + reversals in Inventory Management
492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
2)From SBIW - Logistics > Inventory > Industry - Choose STANDARD" ) bu default is NONE which makes difference
LBWG- Deleted the set up tables for 03
Run the t code OLI1BW to fill the set up table for 2LIS_03_BF .
3)Also check the tcode BF11 or table TBE11 , BW and NDI are check marked, these are more of imperative than prerogative.
Hope it Helps
Chetan
@CP.. -
Dears,
I need to develop 1 report to find out before raising new Purchase requisition whether funds check limitation available or not.
GL natural account :: Budget value :: PO requisition made on account :: PO req status
e.g
Expense account :: allocated fund(1000) :: po req1 200, :: PO 1 approved
po req 2 400 :: PO2 submitted
cud any1 help me on the query pls.
thanks a lot n advance....Dear Sandeep,
Thanks for ur reply. pls help me to understand Purchase requisition and po distributions has any link.at purchase requisition stage should i consider on encumberance value...pls advice...?? which tables wud help me to check the fund before requisition approval...thanks a lot n advance... -
Unit Cost is not Populating in Sales Order Line Level for OPM Enabled Org
Dear All,
This is to inform you that Unit Cost is not populating in Sales Order Lines. Ideally it should pick from OPM financials, but whenever i am running Cost Update it is throwing error. We need to pull out Unit Cost for Sales Analysis Report. Please suggest on the same ASAP. What are the steps needs be followed to populate the Unit Cost. Please suggest.
Thanks & Regards,
PatrickHi
I think it will pick from PRICE list. Why don't to you try by keeping this item in the mentioned Price list.
Regards
Raj -
Planning/Budget Profile always required for Project Profile?
Hi,
Are planning and budget profiles always required fields for Project Profile?
Thanks!
Regards,
VivianHi,
Thanks for your reply. May I know if you could advise relevance of the planning and budget profile? what if I do not specify them in my Project Profile? What will be the impact or default values if they are not specified in the project profile.
Thanks!
Regards,
Vivian -
Send email is not working in share point desinger 2013 for project server 2013 workflow
Hi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
VinayHi,
How to configure email for project server 2013. i have created workflow where i am sending email. It is not sending it.
i have set outgoing mail setting. Tasks are created in my workflow but mail is not sending.
Thank you for helping us.
Thank You
Vinay
Maybe you are looking for
-
Hello, I am going to need a router for the imac. The Imac will be connected to the router, and a PC with a linksys wirelessG adapter will be the secondary machine picking up the signal. Can anyone reccomend a router that works well for Mac to PC netw
-
Is it possible to install a single component from the install dvd?
My install went very well, however the only problem is that the colorsync utility will not launch. I would rather not do a complete reinstall of the entire system... ( particularly because of my shrinking HD). Can I do this? Thanks in advance, Carl
-
How to catch the photos left on the cloud?
Can you explain how to catch all my photos I have left on the cloud. I can't get them anymore. Can somebody help me?
-
Why can't Apple, with all their Capital, have a live support??? All this typlng and switching screens and entering and re-enreing passwords and ID's is crap! Netflix has immediate phone help response!!! + I don't have to pay for movies.I rented a mov
-
Why I can not access my iPhone account on my application store?
Why I can't use my application store and I already verified it?