Task Status not Showing Cost Budget

Dear All..
Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
I have run Update and REfresh Project Summary....
What could be the reason.. Please help...
Many thanx.

Hi
check the PA periods and current reporting period.
Regrads

Similar Messages

  • Server app task list not showing up!

    All of a sudden when I try connecting to my Macpro server locally using the Server app. I connect (no error msg's) but the dialog box with the setup boxes, views, task ..etc is not showing up. When I look at the view on menu bar all the features are greyed out. The only thing showing up is "hide accounts'. Working fine couple of days ago, no changes were made Any idea?

    Thanks everyone for the replies. Here is how I corrected the problem. I deleted and installed a fresh Server app, so now I was able to connect and view my profiles, Noticed in the "Alerts" window that my localhost IP has changed from the original one I used to setup the server. I normally use DHCP with manual i/p. The other night I played around with network addressing and changed to DHCP. That's when my problem started. All is good now and again thanks for quick response!

  • Applications Installed through task sequence not showing up in Software Center

    In the task sequence we use for our OSD Windows 7 machine build, we have Custom-Install Application steps which install a number of of our Applications.  Each of these Applications has the "Allow this application to be installed from the Install
    Application task sequence action without being deployed" checkbox checked.  All of the Applications have the following properties set:
    Installation behavior: Install for system
    Logon requirement: Whether or not a user is logged in
    Installation program visibility: Hidden
    When a machine is built using this task sequence, all of the Applications install successfully - they show up in Control Panel\Programs and Features, and they run correctly. However, none of them show up in the Software Center. I'm not seeing anything in
    any of the logs that indicates a problem, and the Software Center remains empty even after running all the client evaluation cycle actions  
    Interestingly, if I add a couple of the newly build machines to a collection, then target deployments for the already installed Applications to that collection, after running the Machine Policy Retrieval and Evaluation Cycle the Applications immediately
    show up in Software Center as installed.
    Does anyone know if Applications installed through a task sequence do not show up in the Software Center by default, or could you give me some troubleshooting tips if this is not normal?
    Thanks for any suggestions!
    SCCM 2012 SP1, Single site, W7 clients

    Why you deploy applications through task sequences? Task sequences are built and meant to be used with OSD, not application deployment.
    To my knowledge, if you have application install step in a task sequence and you deploy that task sequence to a collection of machines, the software center on those machines only sees the task sequence itself, not the applications inside the task sequence.
    If you want your applications to be shown in the software center, change the method of deploying stuff and deploy applications as they're are meant to.

  • Task status not changing in UWL

    Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
    please let me know any workaround to solve this issue.
    Thanks
    Sarath

    thats right.
    UWL does not refresh immediately. You need to refresh the UWL again.
    As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
    Thanks
    Krishna

  • Task server not showing up?

    I have three services running:
    ZAM Collection client
    ZAM collection server
    ZAM Task Server
    But when I go into the Enterprise Admin console, I only see a Collection
    server
    Task Server is blank
    I even submitted a network scan task and it does not show up in Tasks
    Am I doing something wrong?

    Originally Posted by WoofaJB
    m_jonis wrote:
    > In article <SIHaj.12025$[email protected]>,
    > [email protected] says...
    >> Are you pressing F5 when on the Task Server tab? For some reason
    >> some of the tabs don't refresh themselves. The Task Server tab
    >> is blank for me until I press F5.
    >>
    >> Simon
    >>
    >>
    > That was it.
    > That's kinda stupid though that it doesn't refresh automatically
    > Although I've not applied IR7
    These tabs in the Manager never refresh automatically - on any IR. The
    Tasks one (ie active tasks) does though, every so often...
    I have the same issue except its not that simple, the task server is running but refuses to show up in the Manager even after F5 and also restaring the Manager.
    Any ideas?

  • GRR3 report is not showing cost centers monthly wise totals

    Hi,
      we are having cost center report for full year company code currency report which was working in R3 system. after upgrade it is not showing monthly wise total currency values but when drill down it to actual line item level it is showing all totals. can anybody hlep me to identy issue.
    Thanks,

    Dear Venu
    Check any other standard summarisation report and see whether they are giving data or not. If not you need to implement note 1817039 to fetch summarisation data. But before that I suggest once again you do data collection upto the period and try running your report.If no success then read the note and apply it.
    Regards
    Rajneesh Saxena

  • 6.1 NPD - Project Name and Status not showing in the Project Header

    I have this issue in 6.1 NPD - The NPD Project Name and Status is not showing in the Project header when opening a project. Any ideas? Thank you.

    Is this happening for NPD Projects that are newly created, prior to clicking Save? Or for already existing NPD projects?

  • Task status: Not Authorized

    Hello:
    I just upgraded from ARD2 to ARD3 and am no longer able to generate reports. Whenever I try, the Task Status column reads; Not Authorized (with a red exclaimation point). I am able to observe and control computers, but cannot generate reports, which I had been able to do in version 2. Thanks for any help with this.

    Hi,
    I have the same problem here, where some clients are able to be reported and other not ("! Not Authorized" immediately after starting the report).
    I have just find a (curious) workaround:
    1. Select the client(s), go to Report > User history, select "Rebuild data for report" and press "Generate Report". You will obtain as result a "! Couldn't collect report data" error.
    2. Select the client(s) and go to Report > Administration Settings... Check all fileds to be included in report an press "Get Report". For me all fields are "on" expected "Collect Application Usage Data" and "Collect User Accounting".
    3. Try to report again. For me it works. I have tried to report "Software Version..." what failed on 8 for 13 computers (all running 10.4.5) and after this trick it works fine.
    Regards,
    Yann

  • Task bar not showing

    I have windows 7 and I don't know what I did but after I bought my computer not long after, the task bar would not show after either the screen saver or stand by please     I did a lot of scans with Norton too

    the task bar would not show after either the screen saver or stand by
    Some screen savers are not compatible with Windows 7 and are known to cause this trouble. Change to another one and let us know what happens.
    Which computer is that?
    -Jerry

  • Novatel MiFi WWAN status not showing up

    Hi,
    I got the Novatel MiFi running in modem mode using the Novatel drivers. So far so good. But when I click the "Show WWAN Status in Menu Bar" checkbox, nothing happens. Nothing appears in the menu bar. Also the Apply button remains disabled - not sure that's as it should be.
    But mainly, the WWAN status never shows in the menu bar.
    Does anyone what know what I need to do to make it work? Are there some preferences I could delete? Other ideas?
    thanks!

    By modem mode, do you mean wired using the USB port? If true, I would not expect it to show up as a wireless WAN connection. It would be a USB attached modem.

  • IPMP groups status not showing

    Hi ALL,
    I have 2 V880 nodes with SUN cluster3.1U3. In one node is not showing IPMP Group status.
    root@dbserver1 # scstat -i
    -- IPMP Groups --
    Node Name Group Status Adapter Status
    root@dbserver1 #
    Please help.
    Thanks in advace.

    scstat -i should show atleast one IPMP group on running the command. In your output, you are not seeing any IPMP group.
    Udate with your ifconfig output.

  • Task bar not showing texts.

    Is anyone having trouble with texts not showing up in the notification bar? When I was on iOS 6 it was fine. Then went to iOS 7 and now my texts don't show up. I'll get notifications from other apps. It's just with the messages. They don't pop up.

    Check Settings > Notification Center > Messages:
    "Show in Notification Center" should be "on".
    "Show in Lock Screen" should be "on".
    "Show alerts from everyone" should be checked.

  • Newly created task does NOT show up at SOLMAN project

    We have CHARM configured.
    However, the newly created task cannot be seen at SOLAMN's project. The existing tasks showed without issues.
    What could be the reason?  Thanks!!

    Hi Christy,
    Please refer to the spro configuration at following path:
    Scenario specific setting --> change request management -->extended config --> schedule manager
    Also refer to SAP note 927124.
    Hope this helps!
    Thanks & Regards,
    Kriti Bhalla

  • AirPort status not showing up in menu bar...

    I just started up my computer, and looked at the menu bar for the status of my AirPort connection, and found that it's not shown...
    Nothing in the troubleshooting manual tells me how to turn it on-- it only tells me that it should always be on.

    Try the following ...
    o Launch System Preferences
    o Show > AirPort
    o On the AirPort tab, enable "Show AirPort status in menu bar"

  • Forms component status not showing 'Up'

    10gR2 BI, forms and reports, on Solaris 10. After starting up AS via Application Server Control, the Forms status shows 'Down', yet I can log into our forms app. The status seems to only change to 'Up' after the first login/access. Is this normal behavior? Be nice if all the components that are truly up and available show 'Up'.

    This is normal behaviour, since the application only loads after the first login (not on startup).

Maybe you are looking for