Advance payment and down payment with two diffierent tax code
HI expert!!!
i have one scenario that advance payment and down payment with different tax code.
in this time, advance payement post to vendor with po number, we do not know how to use tax code V1(deductable tax) or VF(Non-deductable tax), so we post advance payement amount by tax code V1(deductable) even though the amount included both. but we must know how amount is defined deductable tax or non-deductable tax when invoice.
when we want to post down payment with VF , we could not post it because advance payement posted with V1 tax code.
this is main problem with my scenario.
and as i know, can i post two advance payement to same vendor and same po item?, i can't do it with my system.
only one advacne payment is possible with one vendor and one po item. or amount of advance payment is all cleared by down payment, then i can post another advance payment to same vendor. is it standard process with po?
thank you in advance!!
hi,
As per my knowledge their is no difference between advance payment and downpayment.
and tax code is used for taxes purpose not for the payment terms.
taxcode is created in ftxp.and related percentages are maintained in fv11.
ex:-
if i want excise duty - 10% on basic value
education cesse 2% on excise duty
sec.education cesses 1% on excise duty
then fitst i have to create 3 condition types and that 3 condition types are used in my taxprocedure and that taxprocedure is assigned to country code..
after that i am created one taxcode in ftxp like v1= exciseduty10%educatiocess2%sec.edu.cesses1% with this description.
and given the values for that conditions in fv11.
and used that v1 taxcode in your p.o in invoice tab.
and payment terms are came from vendor not from taxcode.
Thanking you.
Similar Messages
-
How to enter invoice with two different tax codes in one line?
Dear friends,
I have this PO for which I enter the invoice.
I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
How can I enter in one row in MIRO a debit with two different tax codes.
Thank you.I want in the same line item to enter two tax codes.
Do you Know if there is any way to do this?
It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
How can this be done?
Thank you? -
Automatic payment and down payment
Hi,
I have created one down payment for particuler vendor. When i will do APP for that particuler Vendor then whether this down payment will be taken into account . means i have one po against that i have made down payment. E.g PO xxxxx value inr 100
down payment inr 20
at the time of final settelment through APP payment will be for 80 ???or 100.
also the down payment considered invoice wise or total vendor wiseHi Ramya,
As per my understanding you already done the down payment for 20 PO against (100) so you have to pay the remaining amount 80
correct ,
If it is ocorrect , you have to clear that 20 through F-54 and you have to raise down payment request for remaining 80
In APP system will pick the Down payment request for remaining amount 80
Regards
Surya
Edited by: Surya Naveen on Feb 20, 2009 8:17 AM -
Imported po has been done and down payment made last F.Y and now want cance
Please help me for below scenario.
Our client was created Imported PO and down payment made in last F.Y and now some reasons they want to cancel the PO and create new domestic PO with same PR.
But down payment was cleared and accounts are audited they don't want to reversal the down payment.
How it is possible to cancel the PO without reversal of down payment.
and i reversed the DPR remain down payment is same and tried to cancel the PO line item but it is showing below error.
Diagnosis
You have attempted to delete or block an item that is not yet closed.
An item is regarded as closed if:
o no GR blocked stocks exist
o all down (advance) payments made to date have been taken into
account
o the quantity delivered is the same as the quantity invoiced
o all delivery costs have been taken into account
o the quantity delivered is the same as the quantity issued (only in
the case of stock transport orders).
Please provide me the posible solutions urgently.
Best Regards
RanganadhDear Ranganadh,
For closing/ cancelling the PO, main prerequisite is "There should be no open transactions against that line item."
So unless you reverse/ cancel the downpayment, you can not delete the line in PO
Umakanth R -
ISA credit memos and down payment does not display data R/3 E-commerce 5.0
Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea? -
Link between sales contract and down payment
Hi all,
Is there a way to link sales contract with down payment if down payment is created before sales contract?
Please respond.
Best Regards,
AI.Hi,
You can check this to start: Re: Help.. Query for document trail
Thanks,
Gordon -
Down payment made & down payment received
Dear sir,
Can you tell me the difference between down payment made and down payment received, and give me some examples.
Thank you very much.
Faithfully,
HangvtHi,
Down payment is nothing but advance payment..
sometimes you can make the payment inadvance(that means you have given amount before you receive the goods) and sometimes you will receive the advance payment from customers(you will take amount before you sell the goods and delivered to his premises).
At the time of receipt Down payment
1.Down payment request - F-37
2.Down payment received from customer - F-29
3.Down payment clearing - F-39
At the time of making Down payment
1.Down payment request - F-47
2.Down payment to vendors - F-48
3.Down payment clearing - F-54.
Down payments are special gl items and represented by"A"
Hope understood and you can assign point if you are cleared.
Thanks,
Vasu.. -
Part payment and residual payment
hi sap gurus
i need the diff between part payment and residual payment, and what is the part payment and what is residual paymentHi
Reply for difference between partial Payment and residual payment
Assumption: An expense of Rs.20000 is accounted.
Example of partial Payment
Step one. When the Vendor invoice posted
Exp Dr 20000
Vendor Cr 20000
2nd step: At the time of payment If Partial payment method adopted.
Vendor a/c Dr 10000
Bank Sub Account Cr 10000
Note :If you will go for vendor balance display , it will show both Debit and Credit balance in the vendor account.
(T Code FBL1n)
Example of residual Payment
Step one: When the vendor invoice is posted
Expenses A/c Dr 20000
Vendor A/c Cr 20000
Step two: If residual payment method is applied
Vendor A/c Dr 20000
Bank Sub Account Cr 10000
Vendor A/c Cr 10000
Note: Here the system will clear the original open item and create a new open item for balance amount which is not paid now. In this case it is difficult to know the reference of the original invoice. If you will go for vendor balance display it will show an open item of Rs.10000 only.
Assign points if you find it useful for you
Regards.
Surendra -
Applying payment to down payment requst
Hi all,
I have an issue. Could you Provide some solution...
My client wants to apply payment to down payment requests...
How could be done this...
Thanks in advance...
Regards,
Richy Anand.Hi
Check the below link
http://help.sap.com/saphelp_ides/helpdata/en/6e/12180a9f0411d189b80000e829fbbd/content.htm
For making payment against a downpayment request, you will first have to maintain settings for Downpayment indicator, respective GL Accounts. After setting this up, when you are trying to make payment, automatically a pop-up will come displaying the downpayment request
Malathi -
To differentiate between normal payment and urgent payment
Hi All,
I have refered the oss notes 138456, it is very old oss notes and our version is higher. I did know that instruction keys can be used for it. During Automatic Payments F110, would like to differentiate the normal payments and urgent payments.
but do not know what exact configuration is required for it. kindly guide.
Thanks and Regards
ReenaReena-
In order for you to run your F110 payment runs based on instruction keys follow the process described below:
Maintain instruction key fields in the vendor master data.
In F110 transaction go to the third tab "Free Selection". Under the selection criteria for field name, drop down and in the next pop up box select "Vendor master record" and click on "Instruction Key". This will populate instruction key in the field name.
Next, enter your instruction key under values. Like if you have configured 01 for urgent and 02 for normal, and if you want to run payment for normal vendors, you can enter 02 here.
By doing this, payment program will look select all the vendors who have instruction key 02.
Hope this helps.
Shail -
Under payment and over payment
Dear all,
where to do the setup for under payment and over payment in incoming and outgoing payment.
Regards,
Sarankumar.Bhi
For A/P
From Administration -->> Setup -->> Financials -->> G/L Account Determination -->> Purchasing tab -->> General Subtab
For A/R
From Administration -->> Setup -->> Financials -->> G/L Account Determination -->> Sales tab -->> General Subtab
define a G/L account for the ff.
Overpayment A/P Account & Underpayment A/P Account
update your changes to take effect.
Regards,
Fidel -
DTW - Incoming Payments as Down Payments
I am filling it_DownPayment in the invoicetype column of the Payment_Invoices.csv file. The SDK help is indicating this constant as a valid value.
DTW does however not know about, it fails: "Invalid item name '0' in Enum 'BoRcptInvTypes'..."
Has anyone tried to import Incoming Payments against Down payments?Try the following:
In Payments Template: set DocTypte to rCustomer (if payment type is customer)
In Payments_Invoices Template: set InvoiceType to 203 (for it_DownPayment)
I tried importing in UK Localization SBO 2007A demo database.
Payments Template
RecordKey 1
DocTypte rCustomer
DocDate 20080825
TaxDate 20080825
Series 1012
CardCode C1000
Payments_Invoices Template
RecordKey 1
DocEntry 3
InstallmentId 1
InvoiceType 203
SumApplied 50
Payments_Checks Template
RecordKey 1
AccounttNum 12657662 {BankAccount Number}
BankCode 201030
Branch 344827
CheckAccount 161016
CheckNumber 10002
CheckSum 50
CountryCode GB
DueDate 20080825
Trnsfrable N
Hope this information is helpful.
Regards
Satish -
Difference between Partial payment and residual payment
Hi,
What is difference between partial payment and residual payment and what is the effect of this payment on Payment Terms and Customer aging analysis report?
Can any body help me out.
Thanks & Regards
Amar AdamHi ,
We can take the example given by BSR
For ex. an amount of Rs.100000 outstanding invoice (let say 2000 is the invoice number) in customer account which has payment terms as ZPTERM.
you have recd Rs.25000/- while selecting the open items if you select partial payment the entry will be
Bank a/c dr. 25000
customer a/c cr. 25000
Let us say the document posted is 1000 , which is a partial payment document.
Now this document ages from the posting date, and the payment terms of the invoice are not inherited i.e. you cannot see the ZPTERM in the payment terms field for partial payment document.
Both the Invoice(2000) and Partial Payment(1000) documents remain as open items.
If you make a residual payment, you can see the payment terms ZPTERM in the residual document i.e. payment terms are inherited from the invoice.
And the baseline date is same as invoice date. so ageing of residual document is same as that of invoice.
In this case the invoice document 2000 is cleared and a new open item is created. you can check after posting the residual document, the baseline date and payment terms will be same as that of Invoice.
Hope this explanation will clear your doubts..
Regards,
Praisty -
I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?
Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.
-
Picture bounces up and down, one or two pixels?
Hello, After comression (using Youtube widescreen HD) the picture bounces up and down, one or two pixels.
anyone knows?
/MHello Steve!
Thank you for your time, i´ve found the problem!
I was compressing 24 fps. Input video was 25 fps!
Now its working fine!
Thank you.
/ Markus Hällstrand
Från: Steve Grisetti [email protected]
Skickat: den 6 september 2013 14:15
Till: Markus Hällstrand
Ämne: Picture bounces up and down, one or two pixels?
Re: Picture bounces up and down, one or two pixels?
created by Steve Grisetti<http://forums.adobe.com/people/Steve+Grisetti> in Premiere Elements - View the full discussion<http://forums.adobe.com/message/5658490#5658490
Maybe you are looking for
-
Reduced battery life for high-end MBP 15 2011?
I just bought a new MBP 15" 2011 model (2.2 GHz), an upgrade from my previous MBP 2009 (MacBookPro5,3; Intel Core 2 Duo, 2.66GHz)). I have noticed that the real world battery life is significantly worse than the previous model (3-4 hours vs. 6-7 hour
-
Calling a procedure from within a procedure - dif to post below
Hi Guys, I have created a package to base a form on. The package contains some procedures, one of which is an Update procedure which can be seen below. I have a procedure in another package that I am trying to call. Basically the second procedure is
-
ITunes won't recognize MP3s ripped from CD
Before iTunes was available for Windows, I was using MusicMatch to rip MP3s from Audio CDs....iTunes won't recognize those files...they are not protected...i have consolidated my library and even physically moved the files into the iTunes Music folde
-
Problem with ipod not turning on
well heres the thing.... i dropped my ipod a few months ago then i tried to turn it on using reset etc. and all that other stuff you gotta do to try and get it to work, including waiting 24 hours and then resetting also connecting to other computers,
-
Starts and then turns off!
Ok so my Macbook will start up I see the apple and then it turns off before it loads, I've tried resetting the PRAM the SMC and the ctrlapplepowerbutton and noen of i works, I hold down Option and I can choose to boot from CD or windows but if i clic