Advance Table: Problem on add another button

Hello All,
I have designed page that contains advance table and add another button. The table displays maximum 10 records in a page.
First I click the button and enter the records. After that again I click the button for multiple records insert. Than the previous record goes to another page. In this case users are unable to see the previous record. In my question how can we prevent that one?
Please help me…
Thanks in advance…
-- Subhas

It is a Standard behaviour that table will show the records which are set in the max number of records displayed property.
However if you want that records shudn't get shifted each time you press the add another row button you can set the max number of records programatically and increment 1 to it.
This way the number of records displayed will be now 11.
like each time you press add another row redirect the page, grab the table bean and then
bean.setmaxnumberofrecords()
increment the original value by 1 and then set.
Thanks,
Gaurav Sharma

Similar Messages

Weird Problem with Add Row Button in Master Detail Page

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

2 table rows - one "Add Row" button

I am a novice, not alot of training with javascript.
I need 2 table rows added to a table without having multiple "add row" buttons. I would like to be able to add both rows with one button.
right now the button is set for the most current row:
Table1._Week.addInstance(0);
the row above is Table1._Codes
How do I script this in order to have both rows appear when the Add Row button is selected?

Hi,
A couple of things without benefit of seeing the form.
Are the repeating rows called:
'Week' / 'Codes'?
OR
'_Week' / '_Codes'?
The underscore '_' is shorthand for instanceManager, which is used to call the addInstance. If I assure that the repeating rows are just 'Week' / 'Codes' then the following javascript in the click event of the button should work:
Table1._Week.addInstance(true);
Table1._Codes.addinstance(true);
This should add a row to each repeating row in one button.
Please note that the parameter for the addInstance is either 0 (false) or 1 (true), which relates to whether the row will be data merged with the form.
Hope that helps,
Niall
hmmm, see you have another thread on this: add multiple rows with add a row button ???

Problem in add row button in apex3.2

Hi All,
I have a requirement in tabular form in apex3.2 in which when i click the add row button the add row function is working and 1 row is loaded. again when i click the add row button it should load multiple rows according to my number of click. This condition is working in apex 4.1 but not in 3.2.
With Regards
Wildfire;;;

apex 3.2 is different to 4.1, because in 4.1 it adds the rows on the fly without submitting the page.
But in 3.2 it submits the page and adds the new row, when submitting the page it adds any newly entered row into database and adds a blank row.
But in your scenario you are adding a blank row and not populating the values and clicking the add row to get another blank row, Which will try to post the existing blank row into database and adds new row(so you loose the first blank row)
I guess there was an option in (button or process) 3.2 to specify the number of blank rows you want.
Thanks

How to get current row of Advanced table with no submit

I have an advanced table with an 'Add another button'. When an empty row is created by clicking this button, LOV is used on the first column to populate other fields of the row. The rows of the table carry a button called "Add dependencies" whose functionality is to take the user to a different table to add rows to a different VO. This button is just a button and not a submitButton. I am passing the row's primary key as part of the URI as Vo attribute FdTaskId={@FdTaskId}
The button works perfectly fine for database fetched rows (rows already present in the database), but, for the rows created using 'Add Another button', though LOV populates all fields including the primary key, the URI parameter passes null to the next page. That means, the VO attribute is not set. This works fine only when a 'submit' happens in the first page. For example, if I click Add another row again, then the previously inserted row passes the primary key fine as part of {@FdTaskId}.
Could you please help me how I can resolve this issue?
Thanks,
Datta

I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

Issues with Advance Table Add Row New Row not work in some scenarios.

Hi,
Wondering if there's any issue with Advanced Tables where it does not create any rows. I don't know if anyone tried this or not. I have one OA Page with Advanced Table and a button that when clicked open a new OA Page in a POP-UP Window. The pop-up page conatins one textbox where u enter a data and this gets saved in one of the VO's transient attribute. Now on the ase page if you don't click a button to open a pop-up page you can Add New Rows in the Advanced Table by clicking Add Row Button. But as soon as you open a popup window and close it Add New Rows button doesn't work and is not creating any new rows. Basically page stops working. Both the POP-UP and the base page share the same AM but have different controllers.
POP-UP page is a custom page that I open giving the Destination URI value in the button item and target frame _blank.
I even tried creating rows programmatically for Advance Table but this too doesn't work once u open a pop-up. Also I have used pageContext.putTransactionValue in the pop-up page and am checking and removing this in the base page.
Any help is appreciated.
Thanks

anyone

Advanced table Add another row

Hello everyone,
I have created an advanced table region in my custom page. This is not a mandatory region in my page but there are other fields which are mandatory in the page. Right now i am unable to add another row in the advanced table unless all the other mandatory fields in the page are given some values.
Is there any way to comeout of this situation.
Thank you.
PK

I marked that this thread is answered answered but i have one more question relating to the same type of issue and thought of continuing this thread. It would be great if any one can give a suggestion.
In the Advanced table, i have a delete button(its of type image) for which i have disabled the client and server side validations and implemented PPR for that button. Now when i click on the delete, the page moves up after deleting the row and i don't want that.
How should i handle this situation?
Thank you.

How to add table actions to an Advanced Table programmatically

We have code in my CO which builds an advanced table dynamically and associates it with a VO. The table comes out looking good - the correct columns and data are displayed.
I now want to add Table Actions for that particular dynamically created table.
The code below builds the buttons correctly and they are built/rendered just fine.
After adding this code to build the FlowLayout bean, add the buttons and associate the it to the TableActions of the advanced table bean, none of the buttons on the page work anymore. Each time I click any button (even if it's a page level button like 'Save' or 'Cancel'), I get the following error:
+## Detail 0 ##+
java.lang.NullPointerException
+ at java.util.Hashtable.get(Hashtable.java:336)+
I have added debug statements in by CO, but it is never even getting into the ProcessFormRequest
Below is the code we are using. Can anyone suggest a way to have this flow layout created dynamically like this and not break all button functionality on the page?
//Create the advanced table
OAAdvancedTableBean tableBeanP1 = (OAAdvancedTableBean)createWebBean(pageContext, ADVANCED_TABLE_BEAN, null,"Proc1Tab");
tableBeanP1.setViewUsageName("P100DetailsVO1");
tableBeanP1.setNumberOfRowsDisplayed(10);
//Create a new flow layout to be used as the table actions
OAFlowLayoutBean tableActionBean = (OAFlowLayoutBean)createWebBean(pageContext, FLOW_LAYOUT_BEAN, null, "P1ButtonRegion");
//Create the "Add Control Group" button for this table:
OAButtonBean addButtonBean = (OAButtonBean)createWebBean(pageContext, BUTTON_BEAN, null, "P1AddCtrlGroup");
FireAction FireActionAddGroup = new FireAction();
FireActionAddGroup.setEvent("AddCtrlGroup");
Parameter param = new Parameter();
param.setKey("ProcedureIndex");
param.setValue("1");
Parameter[] params = {param};
FireActionAddGroup.setParameters(params);
addButtonBean.setPrimaryClientAction(FireActionAddGroup);
addButtonBean.setText("Add Control Group");
tableActionBean.addIndexedChild(addButtonBean);
//Add the table actions bean to the table:
tableBeanP1.setTableActions(tableActionBean);

Hello Ashley,
you are already close to the solution. In BADI QISR1 you simply fill the
table SPECIAL_DATA e.g.like
fieldindex = 1
fieldname = 'FIELD1'
fieldvalue = 'Value1'
fieldindex = <n>
fieldname = 'FIELD1'
fieldvalue = 'VALUE<n>'
Then on the Adobe form layout (Adobe Designer), you have to use the table control XFO from the standard library. Here you have to bind then the corresponding column to FIELD1.
Best regards,
Simon

How to add new row at the top of the advance table.

Hi,
I have one advanced table.
I want to add new rows in advanced table. I can able to add rows using the AddMoreRows button in the footer of the advanced table.
This adds the row at the end. But I want to add the row at the top.
How to achive this? Please suggest.
Thanks & Regards,
Raja

Hi,
Yes you can do it...
Just set the add Rows automatically property to False of Add Row Button
and then in processForm Request capture the addRows event
and invoke a method in AM and then create a new Row in VO.
Use this code...it will insert row at the top...
if("addRows".equals(event))
am.invokeMethod("addrows");
public void addrows()
AddressesVOImpl vo1 = getAddressesVO1();
AddressesVORowImpl row1 = (AddressesVORowImpl)vo1.createRow();
vo1.insertRowAtRangeIndex(0,row1);
vo1.setCurrentRow(row1);
Thanks,
Gaurav

EAM advanced search - Add Another value options

Asset Activity is a field on all our work orders.
Is it possible to add it as a drop down value on the Advanced Search page under Add Another?
thanks

Hi;
Please log a Sr and confirm it with support
Regard
Helios

How to get current row value from table when press the submit button

Hi,
I want to get the current row value of SuccessionPlanId which is one of the column in a advanced table.
I created one button (created using personalization, action fired thru CO)in the table as column, so each row having one button, if i press the first row's button means then i want to fetch the first row's SuccessionPlanId and if it is 3rd means then i want to get the value of third row's value.
How to do it in controller extension?
Please reply soon, its urgent.
Thanks in advance,
SAN

Pratap,
Yes, I tried with 'delete' button which is seeded one.
For this, our code using row reference is working too fine. it throws exact SuccessionPlanId value of corresponding row.
I created MessageStyledText, but here i need to give text value right, then only it 'll appear in the page.
Instead i created one image and fired explicitly from the controller processRequest method.
But the same problem remains..
here my code:
public void processRequest(OAPageContext pageContext, OAWebBean webBean){
super.processRequest(pageContext, webBean);
OAButtonBean oabb = (OAButtonBean)webBean.findChildRecursive("XXSubmit");
FireAction action = new FireAction("XXSubmit");
oabb.setAttributeValue(UIConstants.PRIMARY_CLIENT_ACTION_ATTR, action);
OAImageBean oaib=(OAImageBean)webBean.findChildRecursive("XXSubmitImage");
oaib.setFireActionForSubmit("XXSubmitImage", null, null, true);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean){
if("XXSubmitImage".equals(pageContext.getParameter("event"))){
String succIdI="";
String rowRefI = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
if(rowRefI != null && !("".equalsIgnoreCase(rowRefI ))){
PerSuccPlanSearchVORowImpl rowI = (PerSuccPlanSearchVORowImpl)oaam.findRowByRef(rowRefI);
if(rowI != null)
succIdI=rowI.getAttribute("SuccessionPlanId").toString();
}else{
throw new OAException("Row is null");
throw new OAException(succIdI, OAException.INFORMATION);
}else{
super.processFormRequest(pageContext, webBean);
If i run the page using this controller, it throws exception without any value, because for 'succIdI' i initialized without any string.
Can you please suggest me how to solve?

Advanced tables behavior

Hello everyone,
In my custom page, i have implemented advanced tables in the bottom of the page. So basically we need to scroll down the window to add a row in the advanced table as there are many other fields in the page. I see that when we try to create a new row in the advanced table, after clicking the addnewrow button, a row is created but at the same time the page moves up. We have to scroll down the page to enter values in the row added.
Is this the seeded behavior or can we change this behavior so that the page doesn't move up.
Thank you.

the control is going to the top as i am using pageContext.forwardimmediatly once the addanotherrow button is clicked to implement some validation. Is there any way that inspite of using forwardimmediatly, the control doesn't goto the top of the page? I don't want the page to move up.
Thanks

2 Advanced Tables & 3 Advanced Tables is it possible ??!

Hi,
I have create a page with Table-In-Table (2 Advanced Tables ) as Master-Details (Parent Table - Child Table)
Can i add another Details to the second table (Child Table) so the end result to have 3 advanced tables (Parent Table - Child Table1 - Child Table2).
If yes, Please provide basic steps.
Thanks in advance.
Regards...Ashraf

You can't do it using standard SAP functionality (eg you can't store PM works orders in a separate database). If it's custom functionality, you could access the other database using the DBConnect interface, for which there is a specific API and which allows ABAP code to access external databases. The only limitation is that the database must be one supported by SAP (ie SQL Server, MaxDB, DB2, Oracle).
For more info on DBConnect search for "dbconnect" in the Service Marketplace notes search. Although some of the notes reference BW, the functionality is available in any SAP NW AS ABAP system. The ABAP API is available either via Native SQL statements or the CL_SQL* classes in newer (6.10 and later) systems.
MJ

Advanced Table Multiple Selection

Hi,
I have created a advanced table under query bean with multiple selection feature.After querying the advanced table bean When i select the row in the table and click on another button i have writtten a logic in process from request to select only those rows selected in table ,but the view attribute of select check box is retuning null is there any way to identify the rows selected

Use this code in AMImpl. It will definitely work. I have tried. Don't forget to create a Transient Attribute of Type String [[here transient attr is Select]] in the VO.
public void selectFlag()
System.out.println("In the selectFlag");
SombitTestVOImpl vo = (SombitTestVOImpl)findViewObject("SombitTestVO1");
if (vo != null)
Row[] arow = vo.getFilteredRows("Select", "Y");
System.out.println("Row count is"+ arow);
if(arow != null && arow.length > 0)
for(int i=0; i<arow.length; i++)
System.out.println("Value of i is"+ i);
String Job = (String) arow [].getAttribute("Job"); // here you have to write arow followed by i in square bracket
Date NotifyDate = (Date) arow [[i]].getAttribute("NotifyDate"); // here you have to write arow followed by i in square bracket
System.out.println("Value of Job is "+ Job);
System.out.println("Value of NotifyDate is "+ NotifyDate);
Cheers
Sombit :)

Advance table Add another row button error ---Error: Cannot Display Page

hi, i m new to OAF.
I m trying to add new row programatically to my advanced table, but getting the error
Error: Cannot Display Page
You cannot complete this task because one of the following events caused a loss of page data:
Your login session has expired.
A system failure has occurred.
My page has two EOs with two differnt tables Table A(Accident details) and Table B(Victim Details).Table A is Parent of Table B.No relation is defined in my page for these two tables so far.Foreign key is not defined.
On my page I have various field for entering data for Table A and its saving data properly
For table B i have taken the Advanced table.When i click on Add row button of table i m getting the said error.
My CO
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule am=(OAApplicationModule)pageContext.getApplicationModule(webBean);
     System.out.println("processFormRequest ");
     if(pageContext.getParameter("Save")!=null)
        am.invokeMethod("apply",null);
        System.out.println("Save ");
if ("addRows".equals(pageContext.getParameter("event")) && "AdvTblRN".equals(pageContext.getParameter("source")) )
System.out.println("The source is :"+pageContext.getParameter("source"));
String p_header_id = (String)pageContext.getTransactionValue("p_tx_header_id");
Serializable[] param = {p_header_id};
am.invokeMethod("createRow", param);
   am.invokeMethod("apply",null);
   System.out.println("Add Row ");
pageContext.forwardImmediatelyToCurrentPage(null,false,"N");;
And AM
public void createRow( String p_header_id)
Row prow;
VictimDtlVOImpl pvo= getVictimDtlVO1();
pvo.setMaxFetchSize(0);
prow=pvo.createRow();
pvo.insertRow(prow);
prow.setNewRowState(Row.STATUS_INITIALIZED);
   OAViewObject vo1 = (OAViewObject)getVictimDtlVO1();
OADBTransaction transaction1 = getOADBTransaction();
System.out.println("---- "+transaction1.getSequenceValue("XXMIS_SAFETY_VICTIM_DTL_SEQ"));
Row row1 = vo1.createRow();
   vo1.insertRow(row1);
row1.setAttribute("VictimId",transaction1.getSequenceValue("XXMIS_SAFETY_VICTIM_DTL_SEQ"));
row1.setNewRowState(Row.STATUS_INITIALIZED);
public void apply()
try {
getOADBTransaction().commit();
System.out.println("Commit ");
plz help .......
catch (Exception e)
   e.printStackTrace();

Hi Vaishali,
Use below code for add line in Nested Table.
if(pageContext.getParameter("addRows") != null){
        OAAdvancedTableBean sectionsTable = (OAAdvancedTableBean)webBean.findChildRecursive("AdvTblRN");
        OAInnerDataObjectEnumerator sectionsEnum = new OAInnerDataObjectEnumerator(pageContext, sectionsTable);
        while(sectionsEnum.hasMoreElements()){
            RowSet sectionsRowSet = (RowSet) sectionsEnum.nextElement();
            for(int i = 0; i < 1; i++){
                OARow newRow = (OARow) sectionsRowSet.createRow();
                sectionsRowSet.insertRowAtRangeIndex(sectionsRowSet.getRowCount(), newRow);
Thanks,
Dilip

Advance Table: Problem on add another button

Similar Messages

Maybe you are looking for