ADVICE NEEDED-URGENT

Hi Gurus,
My requirment is such that i have to split a single sales data into many records based on material. ( A material 'AA' has some X components, i have to split the data for that material'AA' into X records. Each record corresponding to a particular component). I am not able to use infoset because i have to pick the material with latest part depending on a date field. So how to proceed with this?. I can write a code and split the record into X records in start routine, but SAP advices not to add any records in start routine. If i increase the size of the source package 10 times what will happen. Will the load fail or only performance will be affected? Whether anyboby has any other suggestions?
Note: Infoset and multiprovider are ruled out.

Hi Raghavendra,
To answer this, yes we can do that in the start routine.
We have also done something similar.
This obvisuoly is going to be an impact to data load performance, but still possible.
I assume that for each of these split records, you are also trying to split the keyfigure values based on some logic or look up.
Naveen.A

Similar Messages

Rogue Users: Advice Needed Urgently

Hello all,
I'll get right to it: I was checking out some of the lesser used (by me) software apps that come with tiger, and stumbled across Netinfo Manager.
Upon looking at the 'users' section, I found, along with my own login's and those of my family and friends for this computer, a worrying amount of other 'users'. Some I believe to be ok, such as 'xgridagent' and 'securityagent' etc, but a few I am sure are malicious: a user called 'clamav' for instance. The details of this user, as listed in netinfo manager, are as follows:
Password *
Uid 82
Expire 0
Home /var/virusmails
Gid 82
Shell /bin/tcsh
Name clamav user
Change 0
writerspasswd clamav
Please check the linked picture.
I am still relatively new with mac's since the switch, and honestly, I have been somewhat slack regarding the security of my machine, believing them to be infallible compared to my old windows comps: machines that I loaded with firewalls and virus software etc, kept a close eye on.
I would greatly appreciate some advice: what do I do with these users - the utility gives me the option to delete them: do I simply to this: and how did they infiltrate my workspace to begin with? What can I do to stop it? Firewall is on most of the time, although it will be on permanently now. I invite everyone to check their own netinfo manager for similar problems, although I hope it is simply a rookie error on my part...
Regards,
Tom Bates
PB 12" G4 1.5ghz Mac OS X (10.4.4) http://i48.photobucket.com/albums/f209/TB8tes/netinfopicture.jpg

487/2933
Hello Tom,
Confirming Barry's excellent reply (the other post):
There is nothing wrong with your system.
You have this Anti-Virus installed , right?
Enjoy your Mac!
Axl

Help! Advice needed urgently.

Hey everyone,
I've got an older gen Macbook but I'm about to make the jump away from PC desktop land and am seriously considering a mini. Was going to get an Imac but I'm in love with my current Apple Cinema Display and I really don't want to get saddled with an inferior Imac screen.
The big question: I'm currently using an HP desktop that's 2.13 GHz with 2 gigs of ram. If I went with a 2 GHz mini with 4 gigs of ram, would I be seeing a slower computing experience as a result of having a slower processor in spite of the ddr3 ram? Mainly using my system for Photoshop, writing, browsing and light video editing work.
Also, I'd be going from a dedicated GPU that's close to three years old (GE Force 7350 LE with 128 mb of dedicated video memory) to the integrated 9400.
I'd hate to get a better OS but have a step-down in speed and functionality. Am I worrying for nothing?

I'd say if the video work is light then it will be fine. Otherwise, you are going to want something with a more powerful GPU than the 9400M G in the Mini. The higher end iMacs are also blazing and have better GPUs (at a much higher price of course with $1799 for the 24" with the NVIDIA GeForce GT 120.
The F800 will help tremendously with Photoshop as a scratch disk. Also, you are going to want 7200RPM HDDs inside the computer and on the external. If not, the 5400 RPM internal may lag behind when doing a lot of reading/writing to the drive. I'd recommend the [Hitachi 7k320|http://www.newegg.com/Product/Product.aspx?Item=N82E16822145228] from Newegg for $59.98 after $20 mail in rebate, free shipping, and no tax. If you want a 7k500 you are going to have to wait for online stores to get more stock as only [Seagate|http://www.newegg.com/Product/Product.aspx?Item=N82E16822148374] makes one and it is out of stock. You are also going to want at least 4GB of RAM if doing multiple things at once. Considering the DDR3 RAM prices have dropped tremendously down to [$52.99|http://www.newegg.com/Product/Product.aspx?Item=N82E16820148191]. Using ebates to get [$5 cash back plus 2% is also a plus|http://www.ebates.com/rf.do?referrerid=DMMneqKtzskNampKdYmMZA%3D%3D].
As for your question, it isn't really a matter of hard drive rotation speed (unless you are talking the original 5400 RPM in the Mini and not upgrading to 7200 RPM) but because 3.5" HDDs (desktop HDDs) are much faster than 2.5" HDDs (Notebook HDDs like that in the Mini).
I am almost 100% sure the 9400M G is a big step up from the 7350 LE as even back then it was mainly a low end desktop dedicated card. The CPU of the Mac Mini is also about on par to the HP CPU. However, the upgrade to the Mini to 2.26GHz makes it a bit better. Though remember that the HP uses a desktop class CPU. You can check the Specs at Intel's site. The [HP 2.13GHz E6420|http://processorfinder.intel.com/details.aspx?sSpec=SLA4T]. The [Mini 2GHz P7350|http://processorfinder.intel.com/details.aspx?sSpec=SLB53] and the [Mini 2.26GHz P8400|http://processorfinder.intel.com/details.aspx?sSpec=SLB3R]
In the end, if your PC really isn't working for you right now you can decide whether or not to switch. However, if you pop in some more RAM to the HP maybe it will work better for you?

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Advice needed on buying iphone as gift

I went to apple store, they do not want to sell iphone to me unless I sign AT&T 2 years plan. I thought AT&T has locked the phone and users must subscribe in order to use it. Why Apple store still not allow me to buy?
Please advice, if I want to buy online iphone for my brother, do I or my brother have obligation to sign out AT&T plan?
One more advice needed, I found the shipment takes weeks, do I have option to arrange for self-collection?
My brother birthday is coming soon, I need above advice urgently.
Thank you very much

Tamara wrote:
I'm guessing English is not your first language. It's possible that you misunderstood them. Apple Store employees won't refuse to sell you an iPhone and you don't have to sign up for service in the store.
Well that's not entirely true.
Apple Stores have been instructed not to sell you an iPhone if any of the following is true:
You state that you will not be signing up with AT&T.
You do not have an ID from a US state, also indicating you will not be activating with AT&T
You do not have a credit card
For example, I've seen US Apple Store managers refuse to sell iPhones to European residents because of the AT&T lock-in.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

I have a MacBook Pro 13.3 OS- MAC OS X LION.Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.

I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.

The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report:          6
Anonymous UUID:                    70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.7f2
com.apple.driver.AppleUSBTCButtons    227.6
com.apple.driver.AppleUSBTCKeyEventDriver    227.6
com.apple.driver.AppleUSBTCKeyboard    227.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.iokit.IOAHCIBlockStorage    2.0.4
com.apple.driver.AppleFWOHCI    4.8.9
com.apple.driver.AirPort.Brcm4331    560.7.21
com.apple.driver.AppleSDXC    1.2.2
com.apple.driver.AppleUSBHub    5.0.8
com.apple.iokit.AppleBCM5701Ethernet    3.2.4b8
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleAHCIPort    2.3.0
com.apple.driver.AppleUSBEHCI    5.0.7
com.apple.driver.AppleUSBXHCI    1.0.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleUSBBluetoothHCIController    4.0.7f2
com.apple.iokit.IOBluetoothFamily    4.0.7f2
com.apple.driver.AppleFileSystemDriver    13
com.apple.driver.AppleUSBMultitouch    230.5
com.apple.driver.AppleThunderboltDPInAdapter    1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.5
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.0.7
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    1.6.0
com.apple.iokit.IOThunderboltFamily    2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.5
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOEthernetAVBController    1.0.1b1
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IOUSBFamily    5.0.8
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.5
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Need urgent help!!!! (combine prompt and formula)

Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !

You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash

R12 AR Invoice raxinv -Customization (add columns) - need urgent help

Hi,
I need urgent help in customization of AR invoice report (raxinv) in R12. I am doing report customization for Brazil. As soon as I add one more column in report common query, build query and main query Q_invoice. Report changes to new variables in report editor q_invoice itself for example from remit_to_address_id to remit_to_address_id1 , previous_customer_id to previous_customer_id1 and start giving error that original variables e.g. remit_to_address_id , previous_customer_id are not defined in the query. Variable names and xml tags are also different from each other. even after trying to fix it, error persist.
Thanks
Anju

Hi,
I need urgent help in customization of AR invoice report (raxinv) in R12. I am doing report customization for Brazil. As soon as I add one more column in report common query, build query and main query Q_invoice. Report changes to new variables in report editor q_invoice itself for example from remit_to_address_id to remit_to_address_id1 , previous_customer_id to previous_customer_id1 and start giving error that original variables e.g. remit_to_address_id , previous_customer_id are not defined in the query. Variable names and xml tags are also different from each other. even after trying to fix it, error persist.
Thanks
Anju

Need urgent help to expend a BB school group numbers of members...

Need urgent help to expend a BB school group....The group can only accept 30 members and the school student using BB are about 6000 students that are interested in joining the group....
...Moyosoreoluwa...

I believe there is a hard limit of 30 people in a BBM group.

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

ADVICE NEEDED-URGENT

Similar Messages

Maybe you are looking for