Advice on set up

Hi
I had previously hard wired my house with ethernet through a Linksys router. Now I have an Airport Extreme. I have been using it wirelessly but in the back of the house it's dead slow. I don't mind using cable in those rooms but is the better configuration?
1) Modem-Airport-Router
2) Modem-Router- Airport
Tried the first one but I'm not sure whether the cable from Airport goes to uplink or WAN and didn't get it to work. Could be settings though.
If this has been asked before - my apologies
Thanks
Enio

It doesn't matter which way you do it. The AirPort Extreme base station (AEBS) IS a router also so you aren't talking about any real difference in either configuration.
If you connect the AEBS to the modem, configure the router so that it's DHCP server is DISABLED. You may not be able to use the router's WAN/Internet port. Some routers allow it but some don't.
If you connect the router to the modem, configure the AEBS so that the option to ditribute IP addresses is DISABLED.

Similar Messages

Need advice on setting up a network

Hello... hoping for some advice/suggestion and direction.
I am a bit green and get confused when it comes to setting up a "secure' network so I am not exactly sure how to go about getting what I want, with security in mind, or if I can even achieve it the way I have in mind.
Here is what I want to achieve:
A static IP coming into my office to feed 3 separate networks.
I do computer repair and I basically want to have a completely separate network for customer computers and I currently have a wifi spot at the coffee shop next door. On my private network I will have a server and multiple computers, etc., as well as remotely accessible security cameras.
So, how to achieve this? My thoughts were to have the internet connection come into a managed switch which will feed 3 separate routers.
I do Not have a static IP at the moment and I do Not have my server set up yet. I just have internet coming into Router 1, which feeds a switch and Router 2, and Router 3
What I don't know anything about is the managed switch. I do not know if I can configure it for a static IP or if I even have to configure it for a static IP?
I have a static IP at my residence so I know how to configure a router to work there, but the switch here is throwing me for a loop.
Thanks
(Sorry if this post goes up twice... the first one seems to have just disappeared on me so I modified it and reposted.)

there is no big problem with the main house, but the shop and guest house being 300 feet away is a problem, first its past the manium distance for a cable run for eathernet which is a max of 100 meters,
if there was a way you could have a switch located in between the 3 locations, that would work great.
or you could aet up a point to point wireless connection with outside antennas to over come the distance. this would probly be the best method to look at.

DAW - advice for setting up my new DAW?

Hi,
I intend to get my own DAW/general purpose computer in the next few months and was hoping to run my plan by y'all for advice. I intend to use it half for music recording, and also as a normal computer.
I plan to have a high end graphics card (dual dvi) for games etc, will run a 23" widescreen lcd (pref apple on pc) or bigger maybe upgrading to dual monitors later. I am running a HD tv card which needs some good headroom when recording. I only play far cry and need for speed when it comes to games etc so won't have a million games installed.
I have a about 50 gig of music mp3's and wmas and general stuff, so need lots of storage space. I have about 10gig of AA session files and that will grow so im thinking 30-40 gig min.
For recording/mixing, i have usually 10 trax minimum with lots of real time, sometimes locked fx, i do a lot of processing/wave editing and can have up to 10minute tracks up to 24 etc so i need some juice to power it all. running xp pro sp2.
Can someone explain raid vs ide, im told i can raid 2 similiar drives, but how much better is it, and are there draw backs? can i raid 2 x 15000rpm drives together(2 x 20 or 2 x 40 gig) as my dedicated AA session files space or is that just overkill, i plan to have maybe 2 x 250 gig 7200 or 10 000 drives raided as a dedicated digital vcr for HD tv recording, a small system drive 20-40gig just for installed stuff, another 80-250 gig for normal storage. Any ideas for best way to configure this stuff? minimum im thinking is sep small sys drive, sep AA drive/raided or not, sep bigass drive for TV recording, and sep general storage drive so thats minimum 4 or more.
Wireless keyboard (ultra flat touch keys like on bank atm's sort super silent DO THESE EXIST YET IF SO PLEASE TELL ME WHERE AND WHAT CALLED?)
and wireless optical mouse with extra side buttons and fully functional
Can y'all fill me in on scsi, im told the 14k rpm drives need a scsi
controller or osmething? tell me about this stuff please
Also, 64bit cpus? what the hell does that mean
I'm thinking the fastest intel cpu wht is it 3 gig these days with cache, or does anyone know how much dual cpu will cost (and what needs to go with it) motherboard with 800fsb and 8x agp that can take like 1-2 gig of ram (what sort is fastest?), 8 x agp graphics card that is very high end for 1080i output for high definition tv, and games.
Obviously dvd+rw/cd+rw drive.
Need advise on DAW case, ultra sound and heat proof as i might sleep in the same room and im sick of noisy computers, and i might need a big load of space with all the hdd's depending on what i get, will have a usb2. pci card no doubt and tv card etc
Wondering bout the new audigy 2 zn platinum pro thing Is this any good compared to the normal audigy 2? it says with firewire i can have 7 stereo inputs, is that really true at once, do i need extra external hardware like a mixer to do that, and does AA support that at all?
I have a decent pair of phones i will use for a while until i get studio monitors so don't worry about them for now, thats later.
I hope to spend only about 3-6 grand Australian pref no more, so any suggestions of other things to add or not to bother with etc, revisions?

Billy Corgan wrote:
> I intend to get my own DAW/general purpose computer
> in the next few months and was hoping to run my plan
> by y'all for advice.
Don't clutter a daw with too much GP stuff, office software
installations and antivirus software should generally not be installed
on a daw, and a gp computer can generally not be without either.
Generally, mind you, generally is generally a lot less general with the
more capable hardware, but a lean daw is a happy daw. Fortunately a
p2-300 with 192 megs of ram and a modern harddisk is still a lot of GP
officing computer, and such machines are not costly on the second hand
market.
> I intend to use it half for music recording, and also as
> a normal computer.
There may be valid reasons for doing that, if so then you could be well
off having multiple OS installations on it, one for GP use and one for
Audio use and making it a multibooter. It however my experience that a
multibooter always ends up being booted in the wrong OS ..... O;-)
> I plan to have a high end graphics card (dual dvi) for games etc,
A dual head card is strongly recommended. Matrox has nice cards that do
not need to have a fan on them and that do not require the utmost
hardware speed. You do not WANT to have the ultra fastest graphics card
on a daw because you need to avoid that the graphics cards bus bandwidth
requirements obstruct other, more vital chores. Less fast cards that do
not require a fan allows for a more quiet system.
> will run a 23" widescreen lcd (pref apple on pc) or bigger
> maybe upgrading to dual monitors later.
It may be that you can get dual smaller lcd's for the same budget as one
23", and it may be of more use, everybody is on some kind of a budget,
and you also need to have money over for audio hardware. Good mics and
good mic pre's do more for the quality of your sound than a larger
screen.
> I am running a HD tv card which needs some good headroom when
> recording.
Hmmm ...... select the recording options wisely, you come across as
chasing specs rather than as being aware of just what specs you actually
need.
> I only play far cry and need for speed when it comes to games etc
> so won't have a million games installed.
One never knows what the future holds, but it should be possible to
avoid having too many games installed at any one time.
> I have a about 50 gig of music mp3's and wmas and general stuff,
> so need lots of storage space. I have about 10gig of AA session
> files and that will grow so im thinking 30-40 gig min.
It is too costly pr. gigabyte to buy anything smaller than 120 GB, and
the 120 GB drives of today are all comfortably fast. You should at least
have two physical drives for Audition so as to be able to avoid
simultaneous reads and writes on the same drive, three physical drives
are imo preferable.
> For recording/mixing, i have usually 10 trax minimum with lots
> of real time, sometimes locked fx, i do a lot of processing/wave
> editing and can have up to 10minute tracks up to 24 etc so i need
> some juice to power it all. running xp pro sp2.
I think that your setup is one that would benefit of having three
physical drives to prevent having temp files on the drive that contains
the "static" audio files.
> can someone explain raid vs ide, im told i can raid
> 2 similiar drives, but how much better is it,
Depends, it is not faster than a single drive where it is fastest, but
raid 0 (simple stripe set) is less likely to show performance reduction
due to file fragmentation. A stripe set still counts as "one physical
drive", and if you want to have only two drives in it you are better off
not having them striped.
> and are there draw backs?
You can not remove just one harddisk and move it to another machine. If
one harddisk fails, then all is lost, at least if you run a simple
stripe set. The probability math is tolerable with only two disks in a
stripe set, but it takes less of an error to loose all. All things
considered you need to have a problem to solve by striping prior to
doing it, and distributing multitrack files over several physcial drives
is also a way to increase playback performance if there is a problem to
solve.
> can i raid 2 x 15000 rpm drives together(2 x 20 or 2 x 40 gig)
> as my dedicated AA session files space or is that just overkill,
That would be a silly set up, three 5400 or 7200 rpm 120 GB drives is a
possibly less costly way to get same or better performance, assuming
wise deployment. You will always end up having some copying of files
from one physical drive to another, and consequently it is very wise to
have identical drives so that the faster need not wait for the slower.
> I plan to have maybe 2 x 250 gig 7200 or 10 000 drives raided
> as a dedicated digital vcr for HD tv recording,
I wouldn't raid them, but tv recording is a very fast way of making
large drives appear small and I don't really know what the bandwidth
requirement is for recordign hdtv.
> a small system drive 20-40gig just for installed stuff,
No, you will be wasting a valuable drive bay on a drive that will be a
bottleneck, three drives is a good idea, but preferably identical or at
least similar. Put that old drive in a USB 2.0 box and use it for
project backup instead.
> another 80-250 gig for normal storage.
Yes, you may need storage space when you want to do TV recording, so 750
GB unformatted is not unreasonable.
> Any ideas for best way to configure this stuff? minimum I'm
> thinking is sep small sys drive, sep AA drive/raided or not,
> sep bigass drive for TV recording, and sep general storage
> drive so thats minimum 4 or more.
Three 200 GB drives will probably be the optimally cost efficient setup.
> wireless keyboard (ultra flat touch keys like on bank atm's
> sort super silent DO THESE EXIST YET IF SO PLEASE TELL ME
> WHERE AND WHAT CALLED?)
A wireless keyboard is called too slow and too sloppy ...
> and wireless optical mouse with extra side buttons
But a wireless mouse can be an ergonomic advantage, agreed.
> can y'all fill me in on scsi,
Too costly.
> im told the 14k rpm drives need a scsi
> controller or osmething?
Yes, and thus it gets to be about a very different and very costly mobo.
You do not want a disk controller on the PCI bus on a DAW.
> also, 64bit cpus? what the hell does that mean
Currently nothing of relevance considering the current software. What it
means is that the memory allocation space can be 64 terabytes rather
than 4 GB, and that is rapidly getting to be of importance for database
servers and terminal servers.
> im thinking the fastest intel cpu wht is it 3 gig these
> days with cache, or does anyone know how much dual cpu
> will cost (and what needs to go with it)
It is unknown to me whether Audition actually will benefit from multiple
CPU's, generally the required CPU versions (XEON) and mobo's are too
costly to make sense.
> motherboard with 800fsb
Asus P5P800 is modestly priced. I think your specs are extreme and that
your quests are of the "it would be nice to be able to" type. Life is
not about using as much money on chasing specs as possible, but rather
about getting good results. To do that, you also need to have resources
to get some reasonable audio equipment. Leave all the video concerns out
of it, I have understood them to be about leasure, and live with
recording the number of pixels that is possible with a good DAW.
I suggest this also because it may be problematic to try to make a
multitrack audio recording simultanously on the machine that records the
video in case "both combined" is the productivity quest. Just one reason
for not thinking that hdtv is very important on the machine is that it
is not very likely that you actually record hdtv with a camera.
> wondering bout the new audigy 2 zn platinum pro thing
In the audio context that is relevant here something Midiman is "more
like it" - example product, not the only possible choice. See also
http://www.pcavtech.com, Arny Krügers very interesting web site and a
good place to start learning more about sound cards. A budget card that
it appears will meet your demands is the Midiman 1010LT or similar model
from other manufacturer.
Kind regards
Peter Larsen
* My site is at: http://www.muyiovatki.dk *

Need advice on setting up RAID.

I just purchased a Mac Burly 4 Bay Hard Drive Array with 4 ST31500341AS - Seagate Barracuda 7200.11 1500 GB SATAII 32 MB cache Drives. I will be using this array to store HD 1080i HD video. I am working on a Mac Pro I just installed a LYCeSATA PCI Card to connect the Mac Burly. I need some advice on what the best possible RAID set up would be for me, back up is important.

Hi,
I've the same machine and have a pair of samsung 64GB SSD's striped as a boot disk.
Originally I had them in the optical drive bay using a kit from maxupgrades.com, it worked like a charm. I decided to change that as I wasn't using all four drives and bought the icy dock carrier to place each drive in their own sled (still striped though) and I've two velociraptors in the other two drives.
I bought the maxupgrades kit for around the $40 mark and had to get it shipped to the UK. I sold it recently on ebay here in the UK and got £1 for it!!
As for the MAXPower eSATA 6G controller card, I've one of those hooked up to my Lacie 4big Quadra external RAID.
Funny thing with this is with my previous 3big triple usingFireWire 800 all I had to do was power the 3big up and the volumes would mount on the desktop.
With the 4big RAID using eSATA when I power up the drive nothing happens. You have to actively disconnect either the eSATA cable at the back of the RAID or at the card then reconnect it thereupon the drives mount on the desktop.
I've rambled on a bit but I hope I may have helped a little.

Need advice in setting up a portable external hard drive

Since I travel and am away from home for 4-6 months of the year, I would like to to set up an external drive which I can carry with me and will hopefully contain everything I could possibly need to back up and troubleshoot the iBook while away from home. Toward that end, I have purchased a registered copy of Super Duper, a 250 GB Western Digital notebook drive, and a firewire enclosure from OWC with the Oxford 911+. I have also read the X Lab's Backup and Recovery FAQs and a number of discussion threads. But I have never done anything like this before, and would welcome any advice I could get on specifically how to set up and partition the drive in the best possible way.
Because the internal drive is rapidly filling up with music and photos, I am thinking that the partition for the bootable clone should match the size of the internal drive, which is 120GB.
There are a lot of system discs which came with the iBook, which is the very first iBook G4 that came after the ibook G3. I upgraded the OS to Tiger from Panther, so I don't think I would need to worry about the original 3 Panther discs that contained the OS. But there is a separate disc for the AHT and 8 Software Restore discs as well as iLife 06. I know I can burn safety copies to carry around, but if there is a way to do it, I would like to have the safety copies on the external hard drive. At least if that would be OK with Apple's licensing agreement.
Also, my only diagnostic tools right now are the Apple Hardware Test and the Tech Tool Deluxe disc that came with Applecare. But in the future I might need to acquire others such as Tech Tool Pro, Disc Warrior, Data Rescue II, and possibly something else, so I would want to have my drive set up so that I would be able to boot from any of these.
Part of the drive will just be for extra storage space, in case the internal drive starts to get too full, and some media files will need to be archived to the external drive.
Any help, suggestions or advice will be greatly appreciated.
Many thanks in advance!

Thanks to both of you for your responses!
It sounds like there may be a consensus on making one partition the size of the iBook's internal hard drive, but I am still not at all certain whether the rest of the drive should be one partition or more than one partition. I probably didn't make myself very clear when I posed the question because I'm not sure I know enough to ask an intelligent question. But I think I need to ask a lot of questions because there is so much that I don't know.
One thing I should mention--I have never in my life partitioned a drive so I really have no idea what's desirable, what's not, or really where to start. So perhaps I should try to describe my concerns a bit better.
Because of a highly unpredictable travel schedule, there is a real possibility of being stuck away from home for an extended period of time. For that reason, I want to be prepared for any possible computer disaster. So that means I want to be able to do on the road the exact same things I can do at home where I have all my system discs and diagnostic tools.
I don't really want to carry the originals around--I'd rather leave them at home locked up in my fire proof safe. I could burn copies to CD's and DVD's, but that would result in a pretty big pile of discs to carry around. Also, sometimes the CD's and DVD's just turn into little gold frisbees over time, and I would hate to need one and find out it had gone south and was unusable. So I had the idea of incorporating everything onto the external hard drive so that if it came to it, I could even do an erase and install.
This may be overkill, but I am very paranoid. I am a fair klutz when it comes to computers. I managed to corrupt my OS twice last year. The first time I was trying to reset my password on the iBook and got completely locked out. The second time I was trying to do an Archive and Install on the MBP and made a real hash of it. So I have a real fear of somehow corrupting the software on the iBook and possibly on the clone as well. So I would like to be prepared for the worst possible disaster.
I like the idea of a separate partition for the Tiger OS, the AHT and Tech Tool Deluxe and any others I may acquire. And the Tiger OS would just be what is on the Tiger retail DVD that I have. One question--the DVD just says Version 10.4. Should I update it to 10.4.11 or just leave it as is?
I'm also wondering about a partition for the software that originally came bundled with the iBook and iLife 06? If I ever had to do an erase and install, I would really want to have this. Hopefully I won't--now that there is actually data on the iBook other than the address book and bookmarks, I am beginning to realize why it's only something to do as a last resort. But I would feel better if I had the option far from home. But if it makes no sense to install these on the external drive, would it be possible to burn a DVD of them on the MBP instead of all those CD's?
Also, how do the partitions show up in Disk Utility? Do you give the partitions names? I really don't have a very good idea how all of this works. As I understand it, I have to partition using the Apple Partition Map and I have to get it right the first time, as you can't change the partitions later without having to erase everything.
Oh yes, I did order the power supply for the drive--thanks to reading about that in another post.
Really, I have been trying to research all this, but so often I don't really understand everything I read. I very much appreciate both of you taking the time to help me with this project.
Many thanks!

Advice for setting up new iPad mini, for our 13 yr old, needed.

We are buying an iPad mini for our daughter's 13th birthday present, and naturally, are full of fear & hesitations for all the obvious security reasons. But, she has ADHD & some learning disabililities, and we know that the iPad Mini with app's could help her overcome several academic & organizational challenges when she enters highschool next year.
She, and we, have some questions though, about the WISEST (ie: most responsible) way to set it up for her use.
Should we set up the iPad mini as completely free from our family mac desktop (which still runs OS X 10.6.8, not Lion)?
Should she get her own Apple ID? This would allow her own Cloud storage, & foster future responsibility, but then would she still be able to access app's stored on our family computer & other iPads.?
Should we start her own iTunes account? So that she can buy her own tunes & app's. But once again, could she manually sync already purchased stuff from our family computer?
Backing up: should she back up her iPad mini with iCloud (her own apple ID) or with iTunes?
If we did set her up with her own Apple ID (that we would know the password to), could we still set parental controls - which she actually wants(!)?
She would like limits on the time she can spend on the internet, AND time limits on playing with certain games - as she fears getting "addicted" to the games.
How would we set time limits on app use?
Thanks very much for your suggestions and advice. If you have any other practical parenting / iPad experience, I welcome your suggestions. We'd rather not learn the hard way..

There would be no issue syncing it with your computer and putting content on it. It can back itself up to iCloud, but another backup of the content on a computer is always a good idea.
If you already have an Apple ID with purchased apps, it would be fine to let her use it. You can use a shared Apple ID (for iTunes, iBooks, App Store), and have a seperate iCloud account (To sync critical info and back-up).
The parental controls in iOS are independent from an Apple ID, you can set-up the restrictions when you get the iPad and adjust them to what you are most comfortable with.
Parental Controls: http://support.apple.com/kb/HT4213

Advice on set up for a mixed Airport network with guest network.

Hi,
The manuals on the Airport Extreme and Airport Networking are more technical than my knowledge base can follow. I would like advice on how to set up a new network with a mixture of wired and wireless devices and some Windows equipment as well as os x based macs. the following: dsl broadband from Talk Talk to be managed by a Draytek Vigor 120 external modem connected to an Airport Extreme. I want to connect a Nov 2009 iMac (with Mountain Lion installed), Apple TV and xbox by ethernet cable to the 3 ethernet ports on the Extreme, but also to connect wirelessly one Windows 7 laptop, one Macbook Pro (2010) (again running Mountain Lion) and various other wireless devices like an iPad 2, iPhones etcetera, with all devices being part of one network run under one SSID and able to access the internet, and the 3 computers being able to fileshare with each other. On my current Windows created network which I am abandoning for reasons I won't go into here, if more than one of the computers is switched on, I can use any one of the computers to access information in any of the shared folders on the other computers - via Finder in the case of the macs - and I need this going forward. I would also like to create a Guest network as I have a lot of people come to stay who need internet access. To further complicate things, I would also like to add in an Airport Express wirelessly onto the network and link that to a hi-fi to give me the ability to play my iTunes library (situated on my iMac at present) on the hi-fi.
I appreciate that there are similar questions but I have not really found an answer that exactly nails my situation.
Thanks in advance.

It is not really an issue of how many clients can the iMac serve, but more about the volume of traffic you are processing or data the database application needs to serve. We have a Mac hardware that is a good 6 years or more old running OSX Server and supporting 20/30 clients without any problems.
One idea you may like to consider.
Don't run the VPN on the mac, get a router or separate dedicated networking box that provides that purpose. Then it will talk the load of any networking issues and external attacks. It can also provide other networking services for you such a DHCP, firewall, DNS, internet gateway, etc. They cost less next to nothing and are easy to install.
When you need to get something faster, look for a second hand xerve - we use them all the time. They have the advantage of have fast and very reliable discs, also you can raid the disks and hot swap them for backup purposes,
Finally, moving from one machine to another is each with things like carbon copy. But you cannot have the same licence for OSX server running twice, so you will need to install normal OSX on the iMac once you have done the move.
As for can you easily move from a imac to mac pro, sure not to hard to do.

HELP: New to Mavericks. Need advice on setting up secure user accounts

Hi,
I need advice on how to best set up user accounts on Mavericks.
I must set up an Administrative account...Any suggestion for best settings here to protect against targeted malicious exploits?
I would also like to set up two user accounts for everyday work with applications and Internet browsing done in such a way that the machine would be protected from malicious attacks but with a minimum of inconvience for the users ( myself and my wife ).
Thanks

Hi hassiman, any exploits will come in the form of users downloading suspect pieces of software like browser add-ons and extensions, device drivers and non-trusted apps.
Make sure that you do not use the admin account for any day to day use
Create two normal user accounts, one for each of you and use them day to day
When using the admin account to set up your system, pay very careful attention to the System Preferences > Privacy & Security area. There are various things to set up properly here:
There are three settings for how people can download software, 1) From Mac App Store only, 2) From App Store and registered developers and 3) from anyone. It defaults to 2) but check it and if you feel uncomfortable with that, set it to 1). This might prevent you from downloading and installing software you think you might need; but think carefully about wether you really need it and therefore wether you should temporarily allow it via a lower setting.
For the firewall, if you dont have a firewalled internet gateway device (a wireless router or similar), make sure the firewall is turned on. Most internet connection equipment does have such a firewall; make sure it is blocking any incoming connections by using its admin tool (usually a web browser interface). Consult its documentation for details.
Whenever OS X asks for a password to complete a task of any kind, look carefully at what is making it ask and if you aren't sure, don't go through with it; it is usually wanting the admin account name and ppassword to complete some kind of system modification (install, config etc.).
Make sure that you are both aware of the danger of installing any software that wants to add itself to your system or web browser. Things like custom search bars, extensions etc. If you are viewing a web page and it says you need "x" to see it or use it properly, make sure you really need to use that web site; otherwise don't do it.
It really all comes down to common sense; the worst security breaches and damage come from users who don't know what to do, but they still click "OK" when they should be clicking "cancel" or "close". Make sure you and your wife are fully aware that responsibility lies with yourselves. It is better to take a minute to decide wether to install something (even if it's 20 times a week) than spend days fixing a compromised system.

Need Advice on Setting up a iPod Touch for a Child

My 5 year old daughter was fortunate enough to win a iPod Touch 4 in a school raffle. I have currently setup the device and tied it to my Apple ID so I can easily load the apps I have previously purchased (for her to play with on my devices) and so I can control her settings, access, etc.. The problem arises when I try to message or connect via Facetime to her device. Essentially I am trying to connect to myself and sometimes my iPhone connects back to itself, to my iPad, or her device. I would love to connect to her directly and could establish an Apple ID for her and that device but then I lose access to the Apps that I specifically purchased for her for use on other devices. Does anyone have suggestions on setting up devices in the same household so that they all have access to the same purchased content but still have unique IDs for wifi messaging and Facetime?
Also any advice on controlling content, tracking, and access related to a young child using this device. I have enabled all the content filters and set them to the appropriate levels but any additional tips would be welcome.

you can use two Apple-IDs :
one apple-ID for the kid, so for Facetime,Mail etc.
To keep your purchased Apps,Music,iBooks available on the new iPod simply enter in the appstore.app and itunes.app, ibooks .app the apple-id you have used to purchase stuff.
Same goes for the icloud feature : the ID used for that can be a different then for the purchases.

Need advice on setting up a new project

Hello,
I'm creating a rather complicated project in flash and as3 and would like some advice on how I should set it up.
It requires a login and based on the information the user puts in the login, I need to build a drop down menu.
While logging into the program, the user has to select from one of three categories and one of 10 locations. The main buttons for the drop down are dictated by the categories, each of these buttons have specific modules which will go under each topic.
example:
category1
category2
category3
category1 uses buttons catA catB catC
category2 uses buttons catA catB
category3 uses buttons catA catC
under cata
module 1
module 2
module 3
module 4
under catb
module 1
module 2
module 3
under catc
module 1
module 2
module 3
module 4
module 5
module 6
module 7
Based on the location the user chooses, a module may have to be added under cata and/or catb and/or catc
The user can click on the buttons in the drop down to skip to different modules, but if they do not it will play in order. Each module has a video, once the video is complete there is an activity/quiz (each of the activities are quite different). Once the activity/quiz is complete, the next module loads until they reach the final module and a lovely final quiz.
Any advice on how to set up a complicated project would be great I've spent a couple of days hunting online and looking at/ trying examples, but all I did was confuse myself.
Warning: I come from an AS2 background... (but not minding as3 so far)

var categoryObj:Object={};
var subcategoryObj:Object={};
subcategoryObj["A"]=["mod1","mod2","mod3","mod4"];
subcategoryObj["B"]=["mod1","mod2","mod3"];
subcategoryObj["C"]=["mod1"];
categoryObj["1"]=["A","B","C"];
categoryObj["2"]=["A","B"];
categoryObj["3"]=["A","C"];
var moduleA:Array = moduleF(numX.toString());
function moduleF(numS:String):Array{
var a:Array = [];
for(var i:uint=0;i<categoryObj[numS].length;i++){
for(var j:uint=0;j<subcategoryObj[categoryObj[numS][i]].length;j++){
a.push(subcategoryObj[categoryObj[numS][i]][j]);
// use the filter method to remove duplicates
return a;

Advice on setting up a windows server 2012 domain LAB for study within Hyper V server 2012 r2 machine

HI im wanting to setup a study lab containing several windows 2012 r2 servers (mixture of core and full installs) to allow me to study towards my MCSA in server 2012 r2 and then for MCSE.
Physical equpiment,
1 pc   which is has window 8.1 pro installed from this machine. This machine i would like to remote manage and connect through to my Hyper-v server and then into any of the virtual machines. (this machine is more of a gaming pc so not
able to run to many vm's from it)
2 pc bought Just for study 8 core processor 1 tb of hhd space 16 gb of ram.
This machine i would like to setup using hyper-v server 2012 r2, which then i would create a test domain within it also with some clients allowing me to play and undstand the principles im learning.
now im getting conflictiong information regarding the Hyper-v server 2012.
If i set the hyper-v server up as a standalone in a work group. Would i be able to manage ther VM's within the hyperv server from my external windows 8 pro machine using the remote server management tools or would i need to connect that pc
to the domain.
Things I think i can do but not sure.   as im still learning
Could I setup a server 2012 r2 running AD dns and add the hyper-v role then wihtin that create the rest of the domain inside, allowing me from my other phyical machine log on to domain and manage all servers and machines.
Could I set up as i originally suggested, set up hyper-v 2012 server in a workgroup, then create the domain within the hyper-v server but still connect from my external pc to manage the hyper-v and all the internal VM's within the domain.
I could run a Domain controller on a VM from my other windows 8 machine (within hyper-v or wmware), then on the 2nd machine install the hyper-v server connect it to the domain running from the other machine from what i can see, many people say this is the
better option, BEST Practice, but this is only a lab and i dont require resilience. and i would prefer to have my  as a sever manager via the remote tools.
So what i like to know if you can point me in the right direction either by a guide for someone who has setup a similar to me.
or tell which of the above options is possible or not so i dont waste anytime.
Network, i know i can do this virtually but i already have cisco routers and layer 2 swicthes so i may make the network lab via them.
Thanks in advance for any help you can give me

"If i set the hyper-v server up as a standalone in a work group. Would i be able to manage ther VM's within the hyperv server from my external windows 8 pro machine using the remote server management tools or would i need to
connect that pc to the domain."
It makes it easier to set up if everything is in the same domain, but it is quite possible to manage the VMs without being part of the domain. A very useful tool that I use for my lab all the time (my lab is in a lab domain and my laptop is in the
corporate domain with absolutely no trusts between them) is RDCMAN.
http://www.microsoft.com/en-us/download/details.aspx?id=21101 I all my machines, physical and virtual, defined within RDCMAN and can easily connect to any one of them from my laptop. But to understand how to manage everything remotely, I create
one virtual workstation within the domain and load all the management tools on it. I RDP to the management workstation and perform most management functions, but I can get to any machine directly if I need to.
"Could I setup a server 2012 r2 running AD dns and add the hyper-v role then wihtin that create the rest of the domain inside, allowing me from my other phyical machine log on to domain and manage all servers and machines."
Yes, but you could also build the AD as a VM, too.
. : | : . : | : . tim

Advice on setting up this network

I'm going to take apart my current network that is based on a CISCO router and make it into a roaming network based on the components listed below. I'm going to set the network up using a Mac.
Airport Extreme N (one of the earlier ones) - to be used as the main router
Airport Express N - to be used on the other side of my house to extend the length of my network, and to connect the Express to a HP printer so I can put the printer on the network. It will not be connected via ethernet cable.
D-Link Gigabit Switch - will connect to the Airport Extreme to provide additional ports for other devices
ATT Cellphone Extender - we get poor reception at my house so I needed to get one of these
Verizon Wireless Cellphone Extender - we get poor reception at my house so I needed to get one of these
Xbox 360 - wireless
Blu Ray player - wireless
AppleTV - wireless
Several Mac and PC computers wireless and wired
CAT 6 cables - to connect my D-Link to my Extreme and to connect my ATT and Verizon wireless cellphone extenders to ethernet ports
1. Before I get started with this, is there anything I'm missing or forgot about?
2. Do I setup the Express in Extend a wireless network mode? Will this also allow me to use it to connect the printer?
3. The Express will be located on the other side of my house, so the signal will already be somewhat weaker there, though there is nowhere conveinet to plug the Express into ethernet. Am I wasting my time by extending the network this way since the signal is already weaker by the time it gets to the Express?
Thank you in advance!

1. Before I get started with this, is there anything I'm missing or forgot about?
You appear to have all the necessary equipment. However, note that what you are proposing is not a form of a roaming network. That is because, a roaming network requires that all wireless routers/wireless access points be connected by Ethernet. Instead you are describing an extended wireless network.
2. Do I setup the Express in Extend a wireless network mode? Will this also allow me to use it to connect the printer?
Yes, the 802.11n AirPort Express Base Station (AXn) would need to be configured for Wireless Mode: Extend a wireless network, and the 802.11n AirPort Extreme Base Station (AEBSn) would need to be configured such that the option: Allow this network to be extended, is enabled. Yes, this configuration would also allow you to share a printer to any client connected to either base station.
3. The Express will be located on the other side of my house, so the signal will already be somewhat weaker there, though there is nowhere conveinet to plug the Express into ethernet. Am I wasting my time by extending the network this way since the signal is already weaker by the time it gets to the Express?
Potentially, due to the signal strength at the location you propose to place the AXn is not sufficient, the AXn cannot "boost" the bandwidth only the signal strength. What you will find is that wireless clients will "see" a strong signal, but have relatively poor data transfer rates. You may want to consider using Powerline adapters if you can't run Ethernet between the AEBSn & AXn. These type of adapters take advantage of your home's electrical circuit to create a pseudo Ethernet one. You can then configure both base stations for a roaming network and not have to be concerned about the signal strength.

Need advice on setting up an ideal network

Hello everybody! I have run into a small dilemma regarding general networking, and thought this forum to be the most fitting for such questions.
In a couple of months, I shall be moving into a new apartment. Inside this apartment, there will be four wireless-capable units; two Macbooks with 802.11n, an iPod Touch with 802.11g, and a Nintendo Wii with 802.11g. As for the router, I have one Airport Extreme and one Airport Express, both with 802.11n. Now, for the dilemma;
Putting wireless freedom to it's greatest use, I thought it to be nice not having to directly connect my external hard-disks (a 1TB drive and a 320GB drive, respectively) to my Macbook in order to access the files put on these hard-disks. I would, in other words, connect those to my AEBS. However, having experience with the slightly...sluggish experience of 802.11g, I would very much like to make it a 802.11n-exclusive network, since you can't have some things with N speeds and others with G speeds in the same network. Tragically, doing so would make both my Touch and Wii without any wireless capabilities at all, which is not very desireable either.
So, am I forced to choose between the limitations of 802.11n and the sluggishness of 802.11g? Or is there any way that I can somehow have 2 networks in my home? Advise is very much apreciated, and I am prepared to buy new gear as needed.

If the range of all your wireless devices will not be an issue, I suggest that you configure your base station as a "Dual Band" network even though both are 802.11n devices. To do so, you would need to connect the 802.11n AirPort Express Base Station (AXn) to the 802.11n AirPort Extreme Base Station (AEBSn) via Ethernet, and then, reconfigure the AXn as a bridge and in either the 802.11n (b/g compatible) or 802.11g only radio mode. Have your non-"n" clients connecting to the AXn and the others to the AEBSn without loss of bandwidth performance.
Setting up a "dual band" network is described in the Designing AirPort Networks Using the AirPort Utility document, starting on page 48.

Advice for setting up a mail server.

Over the past few months I have been slowly merging away from websites that don't regard my privacy.
I've changed search engines to duck duck go, deleted my facebook, and now I would like to get away from gmail too!
The only problem being I know nothing about hosting my own email. I have an arch box that is on 24/7 running a diaspora pod.
What email server would work best with this (If any)?
Last edited by Si1v3r (2011-08-01 23:40:30)

This was by far the best tutorial I found for setting up my own personal mail server:
http://workaround.org/ispmail/squeeze
I couldn't recommend it enough. There are a few quirks in places with the version differences but some reading around will sort you out.
It's written in a very Archlinux style and explains the concept fantastically.
Last edited by jack.mitchell (2011-08-12 21:23:40)

Advice on setting up an online store

I have some HTML experience but I'm still an amateur.
I sell video game console skins. I have approximately 12
different platforms a few different packages with about 35
different colors. Thus I have 2000+ items and am continually adding
new consoles and colors.
I have started a template in CS3 and have uploaded it for you
to view:
http://www.systemskins.com
A few questions that I have:
#1. Do I have to / or should I, set up a database before I
build my website?
#2. Since each platform has 35 colors I want to only showcase
6 or 9 items on each page and have additional page numbers at the
bottom with the common fields << Previous | 1 | 2 | 3 | 3 |
Last >> How do I set this up with my template design that I
already have? is it a matter of having to make THAT many pages ? or
is there a simple code that will allow me to have this done for me?
I want to replica :
this
website And I see some sort of "catalog ID" coding in the html.
Is that done by dreamweaver?
I also really like how they have the "Narrow your search" by
colors and themes. Is this also done in dreamweaver?
As you can see I started a search box on the left but I have
no idea how to make it work.
#3. Which "free" shopping cart would be recommended for my
store? osCommerce? E-Commerce Express by Mercantec? Agora?
I would like to have the option for customers to either
create an account or make a one time purchase. And most importantly
to be able to input coupon codes because I will run promotionals.
I'm only concerned about payments through paypal, I don't have nor
plan on getting a credit card merchant account.
I appreciate your time for reading my questions and for
posting your comments/help/suggestions. If you need more
information let me know and I will post it.
Thanks,
Doug

Doug - you won't do much better than taking a look at
Cartweaver - available
in 3 different languages, and easy to use for first timers to
set up, and
they have a very helpful newgroup.
cartweaver.com
Regards,
Brendon
"Kemble0726" <[email protected]> wrote in
message
news:[email protected]...
>I have some HTML experience but I'm still an amateur.
> I sell video game console skins. I have approximately 12
different
> platforms
> with about 35 different colors. Thus I have 420 items
and am continually
> adding
> new consoles and colors.
>
> I have started a template in CS3 and have uploaded it
for you to view:
>
http://www.systemskins.com
>
> A few questions that I have:
>
> #1. Do I have to / or should I, set up a database before
I build my
> website?
>
> #2. Since each platform has 35 colors I want to only
showcase 6 or 9 items
> on
> each page and have additional page numbers at the bottom
with the common
> fields
> << Previous | 1 | 2 | 3 | 3 | Last >> How do
I set this up with my
> template
> design that I already have? is it a matter of having to
make THAT many
> pages ?
> or is there a simple code that will allow me to have
this done for me?
>
> I want to replica :
>
http://www.decalgirl.com/browse.cfm?viewfrom=1&catid=232&step=2
And I
> see
> some sort of "catalog ID" coding in the html. Is that
done by dreamweaver?
>
> I also really like how they have the "Narrow your
search" by colors and
> themes. Is this also done in dreamweaver?
>
> As you can see I started a search box on the left but I
have no idea how
> to
> make it work.
>
> #3. Which "free" shopping cart would be recommended for
my store?
> osCommerce?
> E-Commerce Express by Mercantec? Agora?
> I would like to have the option for customers to either
create an account
> or
> make a one time purchase. And most importantly to be
able to input coupon
> codes
> because I will run promotionals. I'm only concerned
about payments
> through
> paypal, I don't have nor plan on getting a credit card
merchant account.
>
> I appreciate your time for reading my questions and for
posting your
> comments/help/suggestions. If you need more information
let me know and I
> will
> post it.
>
> Thanks,
>
> Doug
>

Design advice for setting users default time

I have an application that in a number of different places requires that records when being updated or created are shown to default to the user's current date. Depending on the location of the user, this could be a different day than where the server is.
All of the relevant fields in the database tables are using a datatype of "TIMESTAMP WITH TIMEZONE". When a users account is initially created, the timezone that the user is in is saved. When the user logs on, an "alter session set time_zone" command runs on the database to change the time zone of the current session.
When a user updates or creates a record and one of the field(s) requires to display the current date of the user, I call a ViewObject which runs a query to "select current_timestamp from dual" to return the current date from the database and populate the field with this.
I've realised that I'm creating a considerable overhead as this view object may be queried dozens of times during a users session and was thinking of running it once when the user logs on and storing the "USER_DATE" as a session variable - then I can simply refer to this each time, instead of many round-trips off to the database. Obviously there is a risk if the user logs on just before midnight and stays on until after that the date will be incorrect but this is extremely unlikely as the application is only used during normal business hours up to 9pm as an exception
Am I heading down the right track here or doing something daft (and missing something far more simple that I should be doing !)
Cheers,
Brent

Hi Frank,
Thanks for that - after 8 years of working with Oracle Forms and afterwards the same again with ADF, I still find it hard sometimes when using ADF to understand the best approach to a particular problem - there is so many different ways of doing things/where to put the code/how to call it etc... ! Things seemed so much simplier back in the Forms days !
Chandra - thanks for the information but this doesn't suit my requirements - I originally went down that path thinking/expecting it to be the holy grail but ran into all sorts of problems as it means that the dates are always being converted into users timezone regardless of whether or not they are creating the transaction or viewing an earlier one. I need the correct "date" to be stored in the database when a user creates/updates a record (for example in California) and this needs to be preserved for other users in different timezones. For example, when a management user in London views that record, the date has got to remain the date that the user entered, and not what the date was in London at the time (eg user entered 14th Feb (23:00) - when London user views it, it must still say 14th Feb even though it was the 15th in London at the time). Global settings like you are using in the adf-config file made this difficult. This is why I went back to stripping all timezone settings back out of the ADF application and relied on database session timezones instead - and when displaying a default date to the user, use the timestamp from the database to ensure the users "date" is displayed.
Cheers,
Brent

Advice on set up

Similar Messages

Maybe you are looking for