AE error: CT generic: not ascii (83 :: 2)

Hi all,
I am using AE CC and I find this error on start: 
AE error: CT generic: not ascii
(83 :: 2)
I close the alert and AE works correctly, but I want to know what is going on. I am using AE CC 12.1.0.168 on a Windows 7 SP1.
Thanks

Gruzlor wrote:
Is there a way to avoid these warnings ?
I would suspect that you need a special motherboard/ system driver. Seems like a special cahce or SSE function is not being initialized properly. Also make sure to have al lthe leatest Windows updates, including possibly things such as .NET runtimes or the latest MSVC runtimes. Tahat aside -  Win XP 32 bit is less than ideal for running a dual processor workstation, so I'd seriously consider upgrading to Vista 64 bit. Seems a waste to run a potentially more powerful workstation with an outdated operating system. Surely you are not dependent on some tools from the stone age so that you must have XP, are you? What's the exact specs of your machine, anyway?
Mylenium

Similar Messages

  • Getting "generic error" when linking clips.  Generic not a helpful word.

    Getting "generic error" when linking clips.  Generic not a helpful word.

    Zero information also does not allow anyone here try to help
    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Windows Vista Bonjour error "You do not have sufficient access..."

    My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

    I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
    MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
    THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
    Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
    My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
    Vista Control Panel > Hardware and Sound > Printers > Add a printer >
    Add a network, wireless or Bluetooth printer >
    The printer that I want isn't listed >
    Add a printer using a TCP/IP address or hostname >
    CHOOSE - Device type: Autodetect
    INPUT - Hostname or IP address: "Time-Capsule"
    (which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
    SELECT - "Query the printer and automatically select the driver to use" >
    Device Type > Standard | Generic Network Card > Install the printer driver* >
    (*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
    a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
    b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
    c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
    From there, it's just Next > Next > and choose to share printer, etc. to finish up.
    Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
    Best of luck to you.

  • Error while running adcfgclone on APPS tier (ERROR: context creation not completed successfully)

    I am getting below error while running adcfgclone on APPS tier
    ERROR : Unable to set CLASSPATH
    /corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is  missing
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    ERROR: context creation not completed successfully.
    Please check /tmp/adcfgclone_29475.err file for errors
    i  copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    ERROR: context creation not completed successfully.
    Please check /tmp/adcfgclone_30763.err file for errors

    Please post the details of the application release, database version and OS.
    ERROR: context creation not completed successfully
    This is a generic error, please check the log files for details about the error.
    Thanks,
    Hussein

  • Urgent ---- loading error through Generic Data Source

    Hi, Bi Gurus
    I am trying DATA MARTING i.e. I wanna extract data from RSMONICTAB nd RSREQDONE tables of BW(3.5) into a ODS in same BW(3.5)
    means from tables RSMONICTAB and RSREQDONE tables I created a view
    with required fields
    then I created Generic data source on it.
    --> I created coresponding Inoobjects --> ODS.
    -->I loaded this ODS from that Generic datasource.
    And I am getting this error?????????????????????
    what to do???????????????????????????????????????
    Error Message
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

    Hi,
    thanx again
    I did as u said (loading upto PSA).
    job's Status in SM37 FINISHED, Duration 8 seconds.
    <b>JOB LOG</b>
                                                                                    Job started                                                                                00         516
    Step 001 started (program RSBATCH1, variant &0000000004563, user ID CHAKRAVARTYS)              00           550
    Start InfoPackage ZPAK_AVA2JBPAT43JP7DYC87X6CFAD                                              RSM1          797
    Synchronized transmission of info IDoc 1 (0 parallel tasks)                                    R3           414
    tRFC: Data Package = 0, TID = , Duration = 00:00:02, ARFCSTATE =                               R3           038
    tRFC: Start = 2007.10.11 01:29:13, End = 2007.10.11 01:29:15                                   R3           039
    InfoPackage ZPAK_AVA2JBPAT43JP7DYC87X6CFAD created request REQU_CWHVP35OSN90MVCAOSB2JNUWC     RSM1          796
    Job finished                                                                                00           517

  • StageVideo Adobe Air 3.0 iOS Error 1069 |onUpstreamBase not found

    I am using a StageVideo object with Adobe Air 3.0 compiled down and running on an iOS device iPhone 3GS.  The StageVideo appears and attaches to the NetStream just fine.  But after I issue NetStream.play(), I get the following runtime error:
    ReferenceError: Error #1069: Property |onUpstreamBase not found on views.DisplayView and there is no default value.
    You'll notice that the "|onUpstreamBase" contains a "pipe"-character at the beginning.  I tried to add:
    public function onUpstreamBase (dataObject:Object):void {
                                            trace(dataObject.toString());
    to the view function, but that didn't work.  And I can't create a function handler for |onUpsteamBase because of the pipe character.
    I am attaching the Netstream and NetConnection to an recorded H.264 rtmp stream. The rest of my code works just fine, but is failing on this runtime error.
    Anyone else run into this? 
    Thanks in advance.

    I got this error too, but not trying to do anything fancy like Stage Video. The issue is w/the "client" property on the NetStream object. You're supposed to use this to add some event handlers/call back functions that the NetStream will invoke.
    I got this error when I set the client property to "this" and defined the callback functions in my class.  However, that generates this error. If you use a generic object to store the call back function, the error does not occur (b/c the generic object is dynamic)...
    private function onNetStatusConnect():void
    foo = { onMetaData: onMetaData };
    stream=new NetStream(connection);
    stream.client=foo;
    // don't do this
    stream.client=this;
    vid=new Video();
    addChild(vid);
    vid.attachNetStream(stream);
    stream.play(feedAddress);
    public function onMetaData(data:Object):void
    trace(data);

  • Jquery Ajax calling code-behind Error - 405 (Method Not Allowed)

    Hi,
    I am working on a web form with Jquery, Ajax to call a code-behind (webservice), but I get the following error: 405 (Method Not Allowed).
    See code...
    ../Ops/new-item.aspx
    <%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="new-item.aspx.cs" Inherits="WebAppFrekuency.Ops.new_item" %>
    <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server">
    <script src="../Scripts/js-new.js" type="text/javascript"></script>
    <script src="../Scripts/jquery-1.11.1.js" type="text/javascript"></script>
    </asp:Content>
    <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
    <div id="message">
    Mensaje
    </div>
    <div id="form">
    <input type="text" id="barcode" name="barcode" /> <button id="submit" type="button">Crear</button>
    </div>
    </asp:Content>
    ../Scripts/js-new.js
    $(document).ready(function () {
    //Informacion de contacto
    var error = false;
    var message = "";
    $("#submit").click(function () {
    if ($("#barcode").val() == "") {
    $("#barcode").css("border", "1px solid red");
    error = true;
    message = "Error - El campo codigo de barras es obligatorio";
    else {
    $("#barcode").css("border", "");
    message = "";
    if (error == false) {
    var formData = '{name:"' + $("#barcode").val() + '"}';
    // process the form
    $.ajax({
    type: "POST", // define the type of HTTP verb we want to use (POST for our form)
    url: "new-item.apsx/Search", // the url where we want to POST
    data: formData, // our data object
    contentType: "application/json; charset=utf-8",
    dataType: "json", // what type of data do we expect back from the server
    success: OnSuccess,
    failure: function (response) {
    alert("Falla - " + response.d);
    // using the done promise callback
    event.preventDefault();
    } else { alert(message); }
    function OnSuccess(response) {
    alert("Exito - " + response.d);
    ../Ops/new-item.aspx.cs
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using System.Net;
    using System.IO;
    namespace WebAppFrekuency.Ops
    public partial class new_item : System.Web.UI.Page
    protected void Page_Load(object sender, EventArgs e)
    [System.Web.Services.WebMethod]
    public static string Search(string epc)
    return "YES";
    Any ideas why I am getting this error?
    Thanks,

    I read the article, but problem persists,  next is the web.config file
    <?xml version="1.0"?>
    <!--
    For more information on how to configure your ASP.NET application, please visit
    http://go.microsoft.com/fwlink/?LinkId=169433
    -->
    <configuration>
    <connectionStrings>
    <add name="ApplicationServices"
    connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true"
    providerName="System.Data.SqlClient" />
    </connectionStrings>
    <system.web>
    <compilation debug="true" targetFramework="4.0" />
    <authentication mode="Forms">
    <forms loginUrl="~/Account/Login.aspx" timeout="2880" />
    </authentication>
    <membership>
    <providers>
    <clear/>
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices"
    enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false"
    maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10"
    applicationName="/" />
    </providers>
    </membership>
    <profile>
    <providers>
    <clear/>
    <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/"/>
    </providers>
    </profile>
    <roleManager enabled="false">
    <providers>
    <clear/>
    <add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
    <add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
    </providers>
    </roleManager>
    <webServices>
    <protocols>
    <add name="HttpGet"/>
    <add name="HttpPost"/>
    </protocols>
    </webServices>
    </system.web>
    <system.webServer>
    <modules runAllManagedModulesForAllRequests="true"/>
    <httpProtocol>
    <customHeaders>
    <add name="Access-Control-Allow-Origin" value="*" />
    <add name="Access-Control-Allow-Headers" value="Content-Type" />
    </customHeaders>
    </httpProtocol>
    </system.webServer>
    </configuration>
    and the machine.config file looks like
    <?xml version="1.0"?>
    <!--
    Please refer to machine.config.comments for a description and
    the default values of each configuration section.
    For a full documentation of the schema please refer to
    http://go.microsoft.com/fwlink/?LinkId=42127
    To improve performance, machine.config should contain only those
    settings that differ from their defaults.
    -->
    <configuration>
    <configSections>
    <section name="oracle.dataaccess.client" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="appSettings" type="System.Configuration.AppSettingsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" restartOnExternalChanges="false" requirePermission="false" />
    <section name="connectionStrings" type="System.Configuration.ConnectionStringsSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
    <section name="mscorlib" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="runtime" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="assemblyBinding" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="satelliteassemblies" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="startup" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="system.codedom" type="System.CodeDom.Compiler.CodeDomConfigurationHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.data" type="System.Data.Common.DbProviderFactoriesConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.data.dataset" type="System.Configuration.NameValueFileSectionHandler, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" restartOnExternalChanges="false" />
    <section name="system.data.odbc" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.data.oledb" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.data.oracleclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.data.sqlclient" type="System.Data.Common.DbProviderConfigurationHandler, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.diagnostics" type="System.Diagnostics.SystemDiagnosticsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="system.runtime.remoting" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="system.windows.forms" type="System.Windows.Forms.WindowsFormsSection, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="windows" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowLocation="false" />
    <section name="uri" type="System.Configuration.UriSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <sectionGroup name="system.runtime.caching" type="System.Runtime.Caching.Configuration.CachingSectionGroup, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
    <section name="memoryCache" type="System.Runtime.Caching.Configuration.MemoryCacheSection, System.Runtime.Caching, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    </sectionGroup>
    <sectionGroup name="system.xml.serialization" type="System.Xml.Serialization.Configuration.SerializationSectionGroup, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="schemaImporterExtensions" type="System.Xml.Serialization.Configuration.SchemaImporterExtensionsSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="dateTimeSerialization" type="System.Xml.Serialization.Configuration.DateTimeSerializationSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="xmlSerializer" type="System.Xml.Serialization.Configuration.XmlSerializerSection, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
    </sectionGroup>
    <sectionGroup name="system.net" type="System.Net.Configuration.NetSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="authenticationModules" type="System.Net.Configuration.AuthenticationModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="connectionManagement" type="System.Net.Configuration.ConnectionManagementSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="defaultProxy" type="System.Net.Configuration.DefaultProxySection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <sectionGroup name="mailSettings" type="System.Net.Configuration.MailSettingsSectionGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="smtp" type="System.Net.Configuration.SmtpSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </sectionGroup>
    <section name="requestCaching" type="System.Net.Configuration.RequestCachingSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="settings" type="System.Net.Configuration.SettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="webRequestModules" type="System.Net.Configuration.WebRequestModulesSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </sectionGroup>
    <sectionGroup name="system.runtime.serialization" type="System.Runtime.Serialization.Configuration.SerializationSectionGroup, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="dataContractSerializer" type="System.Runtime.Serialization.Configuration.DataContractSerializerSection, System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </sectionGroup>
    <sectionGroup name="system.serviceModel" type="System.ServiceModel.Configuration.ServiceModelSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="behaviors" type="System.ServiceModel.Configuration.BehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="bindings" type="System.ServiceModel.Configuration.BindingsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="client" type="System.ServiceModel.Configuration.ClientSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="comContracts" type="System.ServiceModel.Configuration.ComContractsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="commonBehaviors" type="System.ServiceModel.Configuration.CommonBehaviorsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
    <section name="diagnostics" type="System.ServiceModel.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="extensions" type="System.ServiceModel.Configuration.ExtensionsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="machineSettings" type="System.ServiceModel.Configuration.MachineSettingsSection, SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
    <section name="protocolMapping" type="System.ServiceModel.Configuration.ProtocolMappingSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="serviceHostingEnvironment" type="System.ServiceModel.Configuration.ServiceHostingEnvironmentSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowDefinition="MachineToApplication" />
    <section name="services" type="System.ServiceModel.Configuration.ServicesSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="standardEndpoints" type="System.ServiceModel.Configuration.StandardEndpointsSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="routing" type="System.ServiceModel.Routing.Configuration.RoutingSection, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <section name="tracking" type="System.ServiceModel.Activities.Tracking.Configuration.TrackingSection, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    </sectionGroup>
    <sectionGroup name="system.serviceModel.activation" type="System.ServiceModel.Activation.Configuration.ServiceModelActivationSectionGroup, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
    <section name="diagnostics" type="System.ServiceModel.Activation.Configuration.DiagnosticSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="net.pipe" type="System.ServiceModel.Activation.Configuration.NetPipeSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <section name="net.tcp" type="System.ServiceModel.Activation.Configuration.NetTcpSection, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </sectionGroup>
    <sectionGroup name="system.transactions" type="System.Transactions.Configuration.TransactionsSectionGroup, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null">
    <section name="defaultSettings" type="System.Transactions.Configuration.DefaultSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" />
    <section name="machineSettings" type="System.Transactions.Configuration.MachineSettingsSection, System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" allowDefinition="MachineOnly" allowExeDefinition="MachineOnly" />
    </sectionGroup>
    <sectionGroup name="system.web" type="System.Web.Configuration.SystemWebSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
    <section name="anonymousIdentification" type="System.Web.Configuration.AnonymousIdentificationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="authentication" type="System.Web.Configuration.AuthenticationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="authorization" type="System.Web.Configuration.AuthorizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="browserCaps" type="System.Web.Configuration.HttpCapabilitiesSectionHandler, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="clientTarget" type="System.Web.Configuration.ClientTargetSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="compilation" type="System.Web.Configuration.CompilationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
    <section name="customErrors" type="System.Web.Configuration.CustomErrorsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="deployment" type="System.Web.Configuration.DeploymentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" />
    <section name="deviceFilters" type="System.Web.Mobile.DeviceFiltersSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="fullTrustAssemblies" type="System.Web.Configuration.FullTrustAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="globalization" type="System.Web.Configuration.GlobalizationSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="healthMonitoring" type="System.Web.Configuration.HealthMonitoringSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="hostingEnvironment" type="System.Web.Configuration.HostingEnvironmentSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="httpCookies" type="System.Web.Configuration.HttpCookiesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="httpHandlers" type="System.Web.Configuration.HttpHandlersSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="httpModules" type="System.Web.Configuration.HttpModulesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="httpRuntime" type="System.Web.Configuration.HttpRuntimeSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="identity" type="System.Web.Configuration.IdentitySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="machineKey" type="System.Web.Configuration.MachineKeySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="membership" type="System.Web.Configuration.MembershipSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="mobileControls" type="System.Web.UI.MobileControls.MobileControlsSection, System.Web.Mobile, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="pages" type="System.Web.Configuration.PagesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" requirePermission="false" />
    <section name="partialTrustVisibleAssemblies" type="System.Web.Configuration.PartialTrustVisibleAssembliesSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="processModel" type="System.Web.Configuration.ProcessModelSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineOnly" allowLocation="false" />
    <section name="profile" type="System.Web.Configuration.ProfileSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="protocols" type="System.Web.Configuration.ProtocolsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToWebRoot" />
    <section name="roleManager" type="System.Web.Configuration.RoleManagerSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="securityPolicy" type="System.Web.Configuration.SecurityPolicySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="sessionPageState" type="System.Web.Configuration.SessionPageStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="siteMap" type="System.Web.Configuration.SiteMapSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="trace" type="System.Web.Configuration.TraceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="trust" type="System.Web.Configuration.TrustSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="urlMappings" type="System.Web.Configuration.UrlMappingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="webControls" type="System.Web.Configuration.WebControlsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="webParts" type="System.Web.Configuration.WebPartsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="webServices" type="System.Web.Services.Configuration.WebServicesSection, System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <section name="xhtmlConformance" type="System.Web.Configuration.XhtmlConformanceSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <sectionGroup name="caching" type="System.Web.Configuration.SystemWebCachingSectionGroup, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
    <section name="cache" type="System.Web.Configuration.CacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="outputCache" type="System.Web.Configuration.OutputCacheSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="outputCacheSettings" type="System.Web.Configuration.OutputCacheSettingsSection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    <section name="sqlCacheDependency" type="System.Web.Configuration.SqlCacheDependencySection, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />
    </sectionGroup>
    </sectionGroup>
    <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
    <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
    <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
    <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
    <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere" />
    <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
    <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
    <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" />
    </sectionGroup>
    </sectionGroup>
    </sectionGroup>
    <sectionGroup name="system.xaml.hosting" type="System.Xaml.Hosting.Configuration.XamlHostingSectionGroup, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">
    <section name="httpHandlers" type="System.Xaml.Hosting.Configuration.XamlHostingSection, System.Xaml.Hosting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    </sectionGroup>
    <section name="system.webServer" type="System.Configuration.IgnoreSection, System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    </configSections>
    <configProtectedData defaultProvider="RsaProtectedConfigurationProvider">
    <providers>
    <add name="RsaProtectedConfigurationProvider" type="System.Configuration.RsaProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses RsaCryptoServiceProvider to encrypt and decrypt" keyContainerName="NetFrameworkConfigurationKey" cspProviderName="" useMachineContainer="true" useOAEP="false" />
    <add name="DataProtectionConfigurationProvider" type="System.Configuration.DpapiProtectedConfigurationProvider,System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" description="Uses CryptProtectData and CryptUnProtectData Windows APIs to encrypt and decrypt" useMachineProtection="true" keyEntropy="" />
    </providers>
    </configProtectedData>
    <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
    <dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
    <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
    <bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
    </dependentAssembly>
    <dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
    <assemblyIdentity name="MySql.Data.Entity" publicKeyToken="c5687fc88969c44d" culture="neutral" />
    <bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
    </dependentAssembly>
    <dependentAssembly xmlns="urn:schemas-microsoft-com:asm.v1">
    <assemblyIdentity name="MySql.Web" publicKeyToken="c5687fc88969c44d" culture="neutral" />
    <bindingRedirect oldVersion="6.7.4.0" newVersion="6.7.5.0" />
    </dependentAssembly>
    </assemblyBinding>
    </runtime>
    <connectionStrings>
    <add name="LocalSqlServer" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"
    providerName="System.Data.SqlClient" />
    <add name="LocalMySqlServer" connectionString="" />
    <add name="OraAspNetConString" connectionString=" " />
    </connectionStrings>
    <system.data>
    <DbProviderFactories>
    <add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory, Oracle.DataAccess, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    <add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
    <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
    <add name="Microsoft SQL Server Compact Data Provider" invariant="System.Data.SqlServerCe.3.5" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=3.5.1.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
    </DbProviderFactories>
    </system.data>
    <system.serviceModel>
    <extensions>
    <behaviorExtensions>
    <add name="persistenceProvider" type="System.ServiceModel.Configuration.PersistenceProviderElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="workflowRuntime" type="System.ServiceModel.Configuration.WorkflowRuntimeElement, System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="enableWebScript" type="System.ServiceModel.Configuration.WebScriptEnablingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="webHttp" type="System.ServiceModel.Configuration.WebHttpElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="serviceDiscovery" type="System.ServiceModel.Discovery.Configuration.ServiceDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="endpointDiscovery" type="System.ServiceModel.Discovery.Configuration.EndpointDiscoveryElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="etwTracking" type="System.ServiceModel.Activities.Configuration.EtwTrackingBehaviorElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="routing" type="System.ServiceModel.Routing.Configuration.RoutingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="soapProcessing" type="System.ServiceModel.Routing.Configuration.SoapProcessingExtensionElement, System.ServiceModel.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="workflowIdle" type="System.ServiceModel.Activities.Configuration.WorkflowIdleElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="workflowUnhandledException" type="System.ServiceModel.Activities.Configuration.WorkflowUnhandledExceptionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="bufferedReceive" type="System.ServiceModel.Activities.Configuration.BufferedReceiveElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="sendMessageChannelCache" type="System.ServiceModel.Activities.Configuration.SendMessageChannelCacheElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="sqlWorkflowInstanceStore" type="System.ServiceModel.Activities.Configuration.SqlWorkflowInstanceStoreElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="workflowInstanceManagement" type="System.ServiceModel.Activities.Configuration.WorkflowInstanceManagementElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior" type="Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior, Microsoft.VisualStudio.Diagnostics.ServiceModelSink, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    </behaviorExtensions>
    <bindingElementExtensions>
    <add name="webMessageEncoding" type="System.ServiceModel.Configuration.WebMessageEncodingElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="context" type="System.ServiceModel.Configuration.ContextBindingElementExtensionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <add name="byteStreamMessageEncoding" type="System.ServiceModel.Configuration.ByteStreamMessageEncodingElement, System.ServiceModel.Channels, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="discoveryClient" type="System.ServiceModel.Discovery.Configuration.DiscoveryClientElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    </bindingElementExtensions>
    <bindingExtensions>
    <add name="wsHttpContextBinding" type="System.ServiceModel.Configuration.WSHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <add name="netTcpContextBinding" type="System.ServiceModel.Configuration.NetTcpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    <add name="webHttpBinding" type="System.ServiceModel.Configuration.WebHttpBindingCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="basicHttpContextBinding" type="System.ServiceModel.Configuration.BasicHttpContextBindingCollectionElement, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </bindingExtensions>
    <endpointExtensions>
    <add name="dynamicEndpoint" type="System.ServiceModel.Discovery.Configuration.DynamicEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="discoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.DiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="udpDiscoveryEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpDiscoveryEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="announcementEndpoint" type="System.ServiceModel.Discovery.Configuration.AnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="udpAnnouncementEndpoint" type="System.ServiceModel.Discovery.Configuration.UdpAnnouncementEndpointCollectionElement, System.ServiceModel.Discovery, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="workflowControlEndpoint" type="System.ServiceModel.Activities.Configuration.WorkflowControlEndpointCollectionElement, System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="webHttpEndpoint" type="System.ServiceModel.Configuration.WebHttpEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    <add name="webScriptEndpoint" type="System.ServiceModel.Configuration.WebScriptEndpointCollectionElement, System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
    </endpointExtensions>
    </extensions>
    <client>
    <metadata>
    <policyImporters>
    <extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
    </policyImporters>
    <wsdlImporters>
    <extension type="System.ServiceModel.Channels.ContextBindingElementImporter, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL" />
    </wsdlImporters>
    </metadata>
    </client>
    <tracking>
    <profiles>
    <trackingProfile name="">
    <workflow activityDefinitionId="*">
    <workflowInstanceQueries>
    <workflowInstanceQuery>
    <states>
    <state name="*" />
    </states>
    </workflowInstanceQuery>
    </workflowInstanceQueries>
    <activityStateQueries>
    <activityStateQuery activityName="*">
    <states>
    <state name="Faulted" />
    </states>
    </activityStateQuery>
    </activityStateQueries>
    <faultPropagationQueries>
    <faultPropagationQuery faultSourceActivityName="*" faultHandlerActivityName="*" />
    </faultPropagationQueries>
    </workflow>
    </trackingProfile>
    </profiles>
    </tracking>
    <commonBehaviors>
    <endpointBehaviors>
    <Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
    </endpointBehaviors>
    <serviceBehaviors>
    <Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior />
    </serviceBehaviors>
    </commonBehaviors>
    </system.serviceModel>
    <system.web>
    <processModel autoConfig="true" />
    <httpHandlers />
    <membership>
    <providers>
    <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
    <add name="MySQLMembershipProvider" type="MySql.Web.Security.MySQLMembershipProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Clear" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" />
    </providers>
    </membership>
    <profile>
    <providers>
    <add name="OracleProfileProvider" type="Oracle.Web.Profile.OracleProfileProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
    <add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <add name="MySQLProfileProvider" type="MySql.Web.Profile.MySQLProfileProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
    </providers>
    </profile>
    <roleManager>
    <providers>
    <add name="OracleRoleProvider" type="Oracle.Web.Security.OracleRoleProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
    <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
    <add name="MySQLRoleProvider" type="MySql.Web.Security.MySQLRoleProvider, MySql.Web, Version=6.7.5.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" connectionStringName="LocalMySqlServer" applicationName="/" />
    </providers>
    </roleManager>
    <siteMap>
    <providers>
    <add name="OracleSiteMapProvider" type="Oracle.Web.SiteMap.OracleSiteMapProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" securityTrimmingEnabled="true" />
    </providers>
    </siteMap>
    <webParts>
    <personalization>
    <providers>
    <add name="OraclePersonalizationProvider" type="Oracle.Web.Personalization.OraclePersonalizationProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" applicationName="" />
    </providers>
    </personalization>
    </webParts>
    <healthMonitoring>
    <providers>
    <add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=4.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
    </providers>
    </healthMonitoring>
    <webServices>
    <protocols>
    <add name="HttpSoap"/>
    <add name="HttpPost"/>
    <add name="HttpGet"/>
    <add name="Documentation"/>
    </protocols>
    </webServices>
    </system.web>
    </configuration>
    Thanks,
    Mario

  • Error code30009 - Generic access check failed

    I created a new user in oracle reports portal. I assigned the user to a group. I gave this group access to ne of my reprots listed in oracle reports portal (10 g). When i log in using this user, I am able to view the report link but I am not able to run the report. I am getting the error message "REP-56071: Security check failed with error message: Error code30009 - Generic access check failed". Any pointers?

    Hi,
    I am also getting the same error. Did you find out what is causing the problem?
    Thanks

  • Makepkg-error: BUILDSCRIPT is not defined

    Hi!
    I can't use makepkg anymore, i think it is because i updated to the pacman-version from [testing]. When i try to run makepkg, it says:
    ==> FEHLER: BUILDSCRIPT ist nicht definiert! Stellen Sie sicher, dass /etc/makepkg.conf aktualisiert wurde.
    "ERROR: BUILDSCRIPT has not been defined! Make sure that /etc/makepkg.conf has been updated."
    This is my /etc/makepkg.conf
    # /etc/makepkg.conf
    # SOURCE ACQUISITION
    #-- The FTP/HTTP download utility that makepkg should use to acquire sources
    FTPAGENT="/usr/bin/wget --continue --passive-ftp --tries=3 --waitretry=3 --no-check-certificate"
    #FTPAGENT="/usr/bin/snarf"
    #FTPAGENT="/usr/bin/lftpget -c"
    # ARCHITECTURE, COMPILE FLAGS
    CARCH="i686"
    CHOST="i686-pc-linux-gnu"
    #-- Exclusive: will only run on i686
    # -mtune builds exclusively for an architecture
    # -mcpu optimizes for an architecture, but builds for the whole processor family
    CFLAGS="-march=i686 -mtune=generic -O2 -pipe"
    CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe"
    #-- Make Flags: change this for DistCC/SMP systems
    #MAKEFLAGS="-j2"
    # BUILD ENVIRONMENT
    # Defaults: BUILDENV=(!fakeroot !distcc color !ccache)
    #-- fakeroot: Allow building packages as a non-root user
    #-- distcc: Use the Distributed C/C++/ObjC compiler
    #-- color: Colorize output messages
    #-- ccache: Use ccache to cache compilation
    BUILDENV=(fakeroot !distcc color !ccache)
    USE_FAKEROOT="y"
    #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
    #-- specify a space-delimited list of hosts running in the DistCC cluster.
    #DISTCC_HOSTS=""
    # GLOBAL PACKAGE OPTIONS
    # These are default values for the options=() settings
    # Default: OPTIONS=(strip !docs !libtool emptydirs)
    #-- strip: Strip symbols from binaries/libraries
    #-- docs: Save doc and info directories
    #-- libtool: Leave libtool (.la) files in packages
    #-- emptydirs: Leave empty directories in packages
    OPTIONS=(strip !docs libtool emptydirs)
    #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
    INTEGRITY_CHECK=(md5)
    #-- Info and doc directories to remove (if option set correctly above)
    DOC_DIRS=(usr/{,share/}{info,doc,gtk-doc} opt/gnome/{,share/}{info,doc,gtk-doc})
    # PACKAGE OUTPUT
    # Default: put built package and cached source in build directory
    #-- Destination: specify a fixed directory where all packages will be placed
    #PKGDEST=/home/packages
    #-- Source cache: specify a fixed directory where source files will be cached
    #SRCDEST=/home/sources
    #-- Packager: name/email of the person or organization building packages
    #PACKAGER="John Doe <[email protected]>"
    # vim: set ft=sh ts=2 sw=2 et:
    How can i fix this?
    Thanks in advance

    Have a look at /etc/makepkg.conf.pacnew, you should merge new options.

  • HT201209 I have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request,  an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.

    have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request,  an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.

    I have this same problem. It's like it is not Authorizing this Mac.
    What happens when you try to listen to a preview on the Music Store?
    Mine asks me to authorize again and gives me the error exactly as you said above.
    What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
    Mine lets me authorize sucessfully and shows me my account information.
    I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
    I even tried, to no avail, the tips here...
    http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
    If anybody reads all this and has any new info for us, please take the time to post it here!
    PowerMac G4   Mac OS X (10.4.6)  

  • [SOLVED] ERROR: FTPAGENT is not configured.

    Hi i cant build package via yaourt or makepkg. This returns:
    ==> Continue building firefox-beta-bin ? [Y/n]
    ==> ------------------------------------------
    ==>
    ==> Building and installing package
    curl: try 'curl --help' or 'curl --manual' for more information
    /tmp/yaourt-tmp-matze/aur-firefox-beta-bin
    ==> WARNING: Running makepkg as an unprivileged user will result in non-root
    ownership of the packaged files. Try using the fakeroot
    environment. (USE_FAKEROOT=y in makepkg.conf)
    ==> Making package: firefox-beta-bin (Mi 24. Nov 17:47:45 CET 2010)
    ==> Checking Runtime Dependencies...
    config: line 16: syntax error
    ==> ERROR: pacman returned a fatal error.
    ==> Checking Buildtime Dependencies...
    config: line 16: syntax error
    ==> ERROR: pacman returned a fatal error.
    ==> Retrieving Sources...
    ==> ERROR: FTPAGENT is not configured. Check the /etc/makepkg.conf file.
    ==> Aborting...
    ==> ERROR: Makepkg was unable to build firefox-beta-bin.
    ==> Restart building firefox-beta-bin ? [y/N]
    ==> -----------------------------------------
    ==>
    pacman: invalid option -- q
    config: line 16: syntax error
    missing dependency for pidgin-libnotify : pidgin
    missing dependency for purple-plugin-pack : pidgin
    ==> WARNING: Following packages have not been installed:
    firefox-beta-bin
    I am using [testing]. The makepkg.conf file ist new. What went wrong?
    Last edited by matsche (2011-09-23 15:42:21)

    22:35:30 root@/home/matze $ cat /etc/makepkg.conf
    # /etc/makepkg.conf
    # SOURCE ACQUISITION
    #-- The download utilities that makepkg should use to acquire sources
    # Format: 'protocol::agent'
    DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
    'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
    'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
    'rsync::/usr/bin/rsync -z %u %o'
    'scp::/usr/bin/scp -C %u %o')
    # Other common tools:
    # /usr/bin/snarf
    # /usr/bin/lftpget -c
    /usr/bin/curl
    # ARCHITECTURE, COMPILE FLAGS
    CARCH="i686"
    CHOST="i686-pc-linux-gnu"
    #-- Exclusive: will only run on i686
    # -march (or -mcpu) builds exclusively for an architecture
    # -mtune optimizes for an architecture, but builds for whole processor family
    CFLAGS="-march=i686 -mtune=generic -O2 -pipe"
    CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe"
    LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
    #-- Make Flags: change this for DistCC/SMP systems
    #MAKEFLAGS="-j2"
    # BUILD ENVIRONMENT
    # Defaults: BUILDENV=(fakeroot !distcc color !ccache)
    # A negated environment option will do the opposite of the comments below.
    #-- fakeroot: Allow building packages as a non-root user
    #-- distcc: Use the Distributed C/C++/ObjC compiler
    #-- color: Colorize output messages
    #-- ccache: Use ccache to cache compilation
    BUILDENV=(fakeroot !distcc color !ccache)
    #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
    #-- specify a space-delimited list of hosts running in the DistCC cluster.
    #DISTCC_HOSTS=""
    # GLOBAL PACKAGE OPTIONS
    # These are default values for the options=() settings
    # Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
    # A negated option will do the opposite of the comments below.
    #-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
    #-- docs: Save doc directories specified by DOC_DIRS
    #-- libtool: Leave libtool (.la) files in packages
    #-- emptydirs: Leave empty directories in packages
    #-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
    #-- purge: Remove files specified by PURGE_TARGETS
    OPTIONS=(strip docs libtool emptydirs zipman purge)
    #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
    INTEGRITY_CHECK=(md5)
    #-- Options to be used when stripping binaries. See `man strip' for details.
    STRIP_BINARIES="--strip-all"
    #-- Options to be used when stripping shared libraries. See `man strip' for details.
    STRIP_SHARED="--strip-unneeded"
    #-- Options to be used when stripping static libraries. See `man strip' for details.
    STRIP_STATIC="--strip-debug"
    #-- Manual (man and info) directories to compress (if zipman is specified)
    MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
    #-- Doc directories to remove (if !docs is specified)
    DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
    #-- Directories to be searched for the strip option (if strip is specified)
    STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
    #-- Files to be removed from all packages (if purge is specified)
    PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
    # PACKAGE OUTPUT
    # Default: put built package and cached source in build directory
    #-- Destination: specify a fixed directory where all packages will be placed
    #PKGDEST=/home/packages
    #-- Source cache: specify a fixed directory where source files will be cached
    #SRCDEST=/home/sources
    #-- Source packages: specify a fixed directory where all src packages will be placed
    #SRCPKGDEST=/home/srcpackages
    #-- Packager: name/email of the person or organization building packages
    #PACKAGER="John Doe <[email protected]>"
    # EXTENSION DEFAULTS
    # WARNING: Do NOT modify these variables unless you know what you are
    # doing.
    PKGEXT='.pkg.tar.xz'
    SRCEXT='.src.tar.gz'
    # vim: set ft=sh ts=2 sw=2 et:
    I think there's something with the Runtime Dependencies?
    SOLVED: I had some bad files in /usr/local/bin like pacman, makepkg etc.
    Last edited by matsche (2011-09-23 15:41:53)

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error: "Document could not be saved"

    Hi all!
    I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
    I've also tried this solution (posted elsewhere), but with no luck:
    Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
    Click the Utilities item in the Menu Bar, then click Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
    At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
    Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
    I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
    Thanks in advance for your assistance
    Regards
    Alex

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • My HP 8250 will no tprint photos from iphoto

    Hi, I am a new Mac owner and waited until the new dual core imac came out because I wanted the best computer Apple offered. I also purchased a new HP Photosmart 8250 to go along with it because the imac would not work with my older HP photo printer.

  • Need code for dialog program

    Hi All, My requirement is to create a selection screen with 1. browse field - selection for the  files to be uploaded 2. Checkbox - Test run the transaction without parking the entries 3. Two push button Execute and Cancel   Execute - to lunch the pr

  • CR+LF Code at the end of each record selected in sql cursor

    i am selecting some data records in a sql cursor and writing it into a file using UTL_FILE.puT in a plsql procedure. at the end of select statement if i add ||chr(13||chr(10) iam getting CR+CR+LF code if i add only || chr(10) i am getting LF code. Wh

  • Upgrading to Production Suite 5.5

    Hi, Wondering if I upgrade to Production Suite 5.5 today, there is a window of opportunity for upgrading to 6.0 for free, if it comes out within an alotted time frame? Maybe around the time of NAB???? Thanks, Pete

  • USB on right side of Mac not working... Help?

    The USB port on the right side of my Mac stopped working... how can i fix this myself or at least find out what went wrong??