AEx not been 'seen' by AX setup utilities

I've just 'piggybacked' my AEx onto my existing wireless router (BT HomeHub) using the Apple Document: KB 302153, AirPort Express: How to join an existing wireless network in client mode. (Thanx Duane!)
All went well and set up accordingly, but I now cannot get the 'pulldown' box on iTunes to select speakers; when I run the AEx set assistant or utility, it can see the network, but refuses to see the AEx unit with my speakers. Also, the amber light on the AEx unit is just blinking (which I presume is its way of laughing at me!!)
all help (in preserving my sanity) greatfully received....

I have the same problem connecting to the network set up with the new Airport Extreme.
http://discussions.apple.com/thread.jspa?messageID=4033690#4033690

Similar Messages

  • KT6v integrated network adaptor not been seen by OS

    Just got a new board.. a KT6v with the integrated network adaptor. FOr some reason windows XP isnt seeing the Network adaptor. When i plug the network cable into the rj45 jack it lights up. Dont know what to do, XP not even seeing it as an unknow device. Any pointers will be great.

    In the Bios settings i  dont see any setting for the nick... maybe after i get windows to install properly i would do a bios update...
    and another thing is.. i cant seem to install windows when i have the fsb as 166 mhz to detect my 2600 XP processor... it will only install when i have it set as 133 mhz or 100mhz .. any ideas y ?

  • HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

    I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

    You copy them from your old computer or your backup copy of your old computer.
    The iphone is not a backup/storage device.

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • Linksys router not seen by Airport Setup Assistant

    I recently started using a linksys router instead of and airport extreme, it's working, I am able to access the internet. But, my problem is I cannot see it in the Airport set up Assistant. I have not been able to setup my Airport Express because I can't see my wireless router.
    Any one have any ideas?

    Bronco46, Welcome to the discussion area!
    I recently started using a linksys router ... my problem is I cannot see it in the Airport set up Assistant.
    The AirPort Setup Assistant and AirPort Admin Utility are ONLY for Apple's base stations and therefore won't give you access to the Linksys router.
    You need to access the Linksys user's guide and follow the directions for using your browser to configure the Linksys router.
    I have not been able to setup my Airport Express because I can't see my wireless router.
    Configuring the AirPort Express (AX) has nothing to do with configuring the Linksys router. Configure the AX following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • How to setup embarqmail settings. I have not been able to get or receive email using embarqmail.  I have talked with apple rep and he could not get it to work. Can anyone tell me what to do?

    I have not been able to get or send email with my embarqmail account. I have been told to put host as pop.centurylink.net and and stmpcenturylink.net and server port 587. If anyone can help me please let me know. Thx

    Try here:
    iTunes Store: My credit card's security code or zip code does not match my bank's records
    Then try contacting iTunes
    Apple - Support - iTunes - Contact Us

  • Microsoft Word Has Not Been Installed for the Current User

    Hi, everybody
    I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
    Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
    Routes tried and failed...
    1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
    2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
    At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
    Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
    -Kent S.
    Be strong as a ship and wise as a whale

    These questions are really best in the Microsoft Office Forums.
    These are MS Office Questions not ZEN Questions.
    Novell did not design Microsoft's Office Install.
    I have nothing against snapshots, but it does not work great with the Office
    installs, which you yourself know since you are posting here with problems
    based on that.
    And your other method you are trying with the break out is not working well.
    We also know that from experience.
    We can tell you that the way most people install it and the way most people
    succeed doing it, is by doing it the way recommended and designed by
    Microsoft.
    ZEN does that just fine.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "KentFSmith" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Thank you, Grimlock (-Grimlock?-)
    >
    > Through a google search I encountered a very close suggestion, and the
    > poster said they couldn't remember the name of a MS utility but that
    > there was one that would break out the individual MSIs from the Office
    > 2007 setup.exe bundle. The dependent app appears to be a simple and
    > possibly elegant solution, but without a good way to break out the MSIs
    > I don't see how to do anything other than with a config.xml ('Config.xml
    > file in the 2007 Office system'
    > (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
    >
    > Do you know of that utility and where I can find it?
    >
    > There is a lot of history here now of just doing the individual
    > applications. Everyone gets Word and Excel, but much fewer get
    > PowerPoint and Access. All other reasons aside, a compelling one is the
    > reduced number of help calls to the Help Desk here. Occasionally we
    > also just run the whole Office install for someone who needs some of the
    > odd utilities, but that is easily cost-justifiable for us to break them
    > out as exceptions. Otherwise, we focus 90% of our support on just Word
    > and Excel and it pays off nicely.
    >
    > If we switch to putting full Office 2007 on all PCs then there may be a
    > better approach that include other tools than ZfD, such as the fact that
    > we replace 1/3 of all PCs in the organization each year (so that no
    > hardware is more than 3 years "behind"). We could put 1/3 of all Office
    > 2007 installs into the new PC image. But we still need to support all
    > the use of the apps after the install, so ZfD MUST work well, it simply
    > MUST work well or we're screwed, to use the vernacular. Also, just
    > switching from what we've been doing for years -- single app orientation
    > -- means introducing new-ish issues that have to discover and explain to
    > our comrades, and to adjust our orientation with unknown future costs.
    >
    > But that may end up being the simplest adequate solution. And that's
    > what I want.
    >
    > -K
    >
    > grimlock;1883526 Wrote:
    >> Craig Wilson wrote:
    >> > You should really focus on #1.
    >> > Snapshot is not the way to go.
    >> >
    >> > Details about what is Not working or what random behavior may help
    >> folks.
    >> > Ask in the MS forums may help too. dont' mention zenworks.
    >> > Just say you are installing as Administrator from a share and getting
    >> these
    >> > errors.
    >> >
    >> > While not 100% accurate, it should be good enough to get some good
    >> feedback.
    >> >
    >>
    >> Nor is installing 1 app at a time. Install the whole suite, have an
    >> icon for each app that runs the exe for that app with a dependency on
    >> the another app that points to the installer msi.
    >>
    >> If any user runs any app, it will run if the executable is there
    >> (meaning it's been installed). If the executable is not there then it
    >> calls the dependent application (the installer app) and installs it,
    >> and
    >> then runs it.
    >
    >
    > --
    > KentFSmith
    > ------------------------------------------------------------------------
    > KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
    > View this thread: http://forums.novell.com/showthread.php?t=391573
    >
    >

  • SiteMinder Authentication Realm has NOT been correctly configured and...

    Hi All,
    When I set the realm (associated with the authentication provider) as UNPROTECTED, I see the following in my AUWebAgent.log (authentication web agent log):
    [31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: Support for TP cookies is : ENABLED.
    [31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: DefaultAgentName: bppttest.micron.com.
    [31 Aug 2006 16:19:07,051] [main] [INFO] Configuration: FilterDomainName: DISABLED
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Creating caches ..
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Cache Timeout specified. Default is 600 seconds
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Resource Cache Size specified. Default is: 0
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authentication Cache Size specified. Default is: 0
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authorization Cache size specified. Default is: 0
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Auditing is DISABLED
    [31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Caching for anonymous users is DISABLED
    [31 Aug 2006 16:19:07,053] [main] [DEBUG] The SiteMinder Resource Manager is checking if resource "/smauthenticationrealm" is Protected.
    [31 Aug 2006 16:19:07,129] [main] [INFO] Resource "/smauthenticationrealm" is NOT Protected.
    [31 Aug 2006 16:19:07,129] [main] [ERROR] The SiteMinder Authentication Realm has NOT been correctly configured and is unavailable.
    Additional info:
    Using SiteMinder 5.5 on WebLogic 8.1 sp5
    When & if I set all my realms as protected then I am unable to startup my servers and get the folowing error:
    We are trying to setup (as in intergrate SiteMinder with Savvion) SiteMinder v2 with weblogic 8.1 sp 5. We have appropriately included the references to variours siteminder related jars as per Netegrity's ASA document. We aren't using any webserver, instead wewould be using launching page (which be a protected resource). The following is the installation, configuration, and testing information related to various siteminder components:
    SiteMinder Identity Asserter (IA) - installed, configured & tested successfully.
    SiteMinder Authentication Provider - installed, configured & test result -> Unsuccessful.
    SiteMinder Authorziation provider - installed, configured & test result -> Unsuccessful.
    Has anyone seen anything similar to the following? My guess on the above is that it looks like it is trying initialise siteminder stuff every time we start each of the servers(admin, ejb and portal). Since the initialisation happens for the 1st time) when the admin server is started, an error is thrown complaining about not being to initialise when we start either portal or ejb after that. If this is true then is there a way around this problem?
    The Admin Server starts fine. But when we try to start either of the ejb or portal server, we get the following error:
    <Aug 16, 2006 4:03:01 PM MDT> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
    [java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
            java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
    [java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
            java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
    at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
    at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
    at weblogic.Server.main(Server.java:32)
    >
    <Aug 16, 2006 4:03:01 PM MDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
    [java.rmi.MarshalException : failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
            java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9 ]>
    The WebLogic Server did not start up properly.
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
    [java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
            java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
    at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
    at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
    at weblogic.Server.main(Server.java:32)
    Reason: weblogic.security.service.SecurityServiceRuntimeException : [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
    [java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName ;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
            java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
    Any help would be appreciated.
    Regards,
    Prashant

    but it just says it cannot repair due to another program being installed.
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.

    Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login.  This screen shows up on opening the computer and has never been seen before the last month or so.  It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red.   I've never seen this before and ignoring it does not effect any operations.   Is this legitimate or some kind of identity fishing?

    Hello,
    Have you done the recent Security updates?
    Is this from Sleep or on bootup?
    Timing is about right for the FlashBack attack.
    Disable Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
    https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
    More bad news...
    https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

  • The Microsoft Software License Terms have not been completely downloaded and cannot be accepted

    I have setup SCCM 2012 Sp1 on Server 2012 with WSUS using the internal database. When I sync updates in SCCM, I get the following error on some of the updates. I have run the sync 3 times over a day with the same updates failing
    "Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow"
    "Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
    "STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=SiteServerxx.COM.AU SITE=MEL PID=2260 TID=2716 GMTDATE=Sat Jan 26 03:56:15.496 2013 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
    ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0"
    Not all of the updates are showing

    I have seen this several times and it's often just a timing issue with downloading the EULA's that will go away after a few days or can be caused by a proxy server not allowing the download. Do you have a proxy?
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ??

    just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?

    mickair wrote:
    I have been experiencing some networking problems
    Welcome to Apple's discussion groups.
    I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
    Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
    I use {the TC's} DHCP function ... to avoid unauthorized use.
    This a discussion for another thread, but that's not what DHCP is for.
    The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
    With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
    The AEBS is currently setup as being a WDS Relay at the moment
    Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
    Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
    http://discussions.apple.com/thread.jspa?threadID=2273124
    {The AE-Alpha} connects fine as WDS remote at the moment
    I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
    Physical location:
    AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
    A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

  • XML file not generate in MOPZ - system has not been registered in SLM

    HI,
    I need to install EHP4 in ERP 6.0. So to get the xml file i installed solution manager 7.0 EHP1 and post process of EHP1.
    ST -400 -21
    the important Notes i followed.
    ==================================================================
    Note 1151784 - Setup of SL Controller for Live Update
    Note 1145444 - SLM configuration
    Note 1277035 - Solution Manager: EHP4 product data missing
    Note 1122966 - Maintenance Optimizer: Notes for Enhancement Packages
    Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
    Note 1154188 - SLM web service authentication 700 SP14 ( SERVICE NOT AVAILABLE )
    Note 669669 - Updating the SAP Component Repository in the SLD
    Note 1244225 - Solution Manager 7.0 EhP 1: recommended corrections
    Note 1137683 - Maintenance Optimizer: Notes for Software Lifecycle Manager
    =======================================================================
    Note 1334252 - SAP Solution Manager - Basic functions SP20 and higher ( this note contain post process of EHP1)
    ===============================================================
    Still i am not getting the xml file of EHP4 for ERP 6.0.
    I am getting the error "The system/systems - VMW, has/have not been registered in SLM"
    Regards
    Lee

    hi Ruediger Stoecker ,
    But the xml file didn't generate. that's why i worried.
    ==============================================
    I tried with end of selection process in MOPZ upto "END Maintenance" phase. The XML file didn't generate.
    Edited by: Lee green on Dec 23, 2009 10:10 AM

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • "This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

    We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
    Facts:
    - Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
    - issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
    - Issue occurs on both external cellular data and internal wireless networks
    - Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
    - Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
    - Closing mail app / rebooting device does not resolve the issue
    - Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
    - Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
    - This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
    - If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
    - If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
    Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

    GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
    http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

Maybe you are looking for