AF100 clip names not showing up in PP. Still just numbers.

Okay, so I copies the metadata to the camera and what not.
Check.
Record some clips.
Check.
When I view the clips in the Mac finder window, the name I gave the clips pre the metadata show up just fine (test0001, test 0002), but when I import those same clips into PP, it STILL imports the clips as, 0001, 0002, etc., disregarding the meta tags.
What am I missing?

Probably nothing. PP shows you the name of the file itself. Metadata are in other columns.

Similar Messages

Clip names not showing in project view FCPX

I have multiple iMacs running FCPX and on one the project is showing only the word 'video' for the clip names. How do I get it to show the actual clips name?

Oops - this should be posted in the Premiere Elements Section.

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

I am editing a wedding video in iMovie11 that was recorded on a mini dv tape. When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline. However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video. I exported the video and burned it to a dvd using Toast 11 pro. The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show. I would certainly appreciate any advice as to how to solve my problem. THANK YOU!!!

Is your video shot in 16:9 aspect ratio or 4:3?
You can go to File/Project Properties and set the aspect ratio for the project.
When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
CROP will fill the screen, but will cut off the top and bottom of your frame.

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

Chapter name not showing up in Scene Selection

I have an iMovie 9 project that has three chapters. I've used the Chapter Markers to delineate where they begin and what their names are.
I've sent the finished project to Media Browser and then I go to iDVD to burn the project successfully and all seems well.
The trouble is, the first chapter's name is not showing up in the Scene Selection. It's just listed as "The Beginning" instead of the name I've given it. I checked it in the preview function before I burn the DVD, and it's not there, either. The other two chapters' names show up successfully.
Can anyone help me here? Thanks.

I just made sure that the Chapter Marker was at the very beginning of the clip, and that seemed to have solved the problem.

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

Windows Server printer names not showing in Windows 8

I have an annoying problem that's causing confusion for users. We have printers set up on a Windows Server 2008 R2 machine all published in AD via print manager and then deployed through group policy. For all my XP, Win7 machines the printers show the user
friendly Share Name in devices and printers. This is important because we have a lot of the same make/model printers. In Windows 8 the Printer hardware name (i.e. HP LaserJet 600 M601 PCL6) shows up mulitple times, but not the friendly share name (Carbon,
Onyx, Graphite, etc.) that each printer has as a sticker on the front. So a user has no idea which printer is in their physical area.
The printer properties shows the share name correctly, but the devices window is just filled with identical printers. Again, this wasn't an issue pre-Win8, they display correctly there. Anyone have an idea?
Curt Kessler - FLC

Exactly, the answer provided does not address the issue. The share name is displayed correctly by Active Directory and the printers are listed in Active Directory appropriately to include all attributes. The problem is that when we add the
printer to a Windows 8 OS it displays the printer driver as the printer name. This causes confusion to our end users when they map multiple printers that share the same driver. I will note that this doesn't seem to be a problem with all printer
models. For example Xerox shared printers display correctly while it seems that HP printers do not.

Server name not showing up in Chooser

mac OS 10.1.3 server. The server name is not showing up in the Chooser,. I can get to it by typing in the IP address, but this is a pain for my teachers.
It showed up for a long time, but now it will not show up.
Any ideas?

Apple talk is on the server and the clients. I also have another server that is connected to the same switch and it can be seen in the chooser. So I do not think it is a config problem with the switches or hubs. I have not changed anything (that I know of). I have researched this and can not find anything on it.

Account name not showing in 'Partners' Block for sold to party and ship to

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Contact names not showing in messages, only number

nokia 6121 no names will show when ringing or recieving texts so I dont know who they are from etc, very frustrating, how do I change it to show the contact name not number? I cant find any settings to help me? thanks

Hi, In such case, try to check the things below:
1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

Picture names not showing in iphoto+mail

I recently updated to ilife ´08 and can´t figure out how to get the actual data names to show. I don´t sant to see titles,ratings and keywords.. I want to see the actual names of the pictures. Also when I hit the mail button in iphoto the pictures are put in the mail... without the pictures name. If I drag and drop the pics to a desktop folder the names ar5e of course correct. But many of the people I send mails to are not even aware how to drag and drop. If I send someone an email with 40 pictures to chose from,I want them to see the names underneath the pictures in the email without having to drag and drop. This was always how it worked in ilife ´07 and it makes choosing the pictures and telling me which ones they want in high quality a very easy process. I can´t even figure out how to sort the photos by "NAME". If there is no way to change it then I will be going back to the older version. Sometimes "improvement" is not a good thing.
Does anybody know how to do this?

When you select a pic to Email in the iPhoto Window and hit the email button you have the option to include title and comments with the photo.
Uploaded with plasq's Skitch!
In iPhoto you have two concepts that are related:
Title is a name that you give to a photo in iPhoto
Filename is the name of the file that contains the photo.
Which are you referring to when you say "name"?
Regards
TD

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

Blackberry Pearl 8120-contacts names not showing

I just upgraded to this phone and half the time when my phone rings contact names do not show up, just the phone number. What's going on?

Do you have those names/numbers in your BlackBerry Adress Book?
also, read this:
There could be any one of three solutions... Try these:
1. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
3. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Host name not showing up under Active Clients

When I go into my router and check active connections, I can see all host names like "Acer Laptop", "IPhone" etc..., IP and MAC address' that are connected to router. Today, when I was in there looking, I saw an asterisk where host name should be for the TouchPad. (it took me a while to figure out it was the TouchPad) Is there a reason why Host name would not show up?
I have gone into "Device Settings" and set "Name" as "Chucks TouchPad". Is that the host name that should be showing on router?
Thank You for any assistance.
Post relates to: HP TouchPad (WiFi)

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

AF100 clip names not showing up in PP. Still just numbers.

Similar Messages

Maybe you are looking for