TABLE for components issued to the order

Hello all,
I have a requirement where I am asked to create a report which picks up all the open orders and and all the Actual quantities of components that have been issued to the order and the currency value for it. Would you know what tables I can use for this report? One table that I found useful is COSP (CO Object: Cost Totals for External Postings). It gives me the dollar value of components issued and quantity but we dont get the material number for those components.
If you have any suggestion plz let me know.
Regards

For actual
Check AUFM table
selection criteria movement type 261  -(AUFM- BWART)
posting date:( AUFM- BUDAT)
you can find the actual posting quantity  (AUFM-ERFMG)  relevant to production order and value (AUFM-SHKZG)
for plan
use RESB table.

Similar Messages

  • System status for goods issue to the order (ISSD)

    Hi All,
    In BS22 we can see the system status for GI as ISSD. How to enable this status in the production order.
    In BS42 we can assign this system status to the selection profile.
    But how to assign this status profile to the order/order type?
    Edited by: pp_srijit on Jun 9, 2010 2:24 PM

    Hi Srijit,
    You can assign this status profile to the order Type in Transaction OPJH in case of production order and in CORN in case of process order under the tab "Status management".
    Hope it helps.
    Regards,
    Kaushik

  • Serial number of components issued to production order

    Hi Guys,
    I want to get a report for components issued to production orders with Serial numbers. Is there any report available.
    thanks and regards
    Murugesan

    Hai Murugesan,
    Try MCRE or MCRX here you can get the materials list which you have issued to production order. Other wise goto MB51 mov.type 261. and execute here also you can get the details.
    Reg/ Shankar G.

  • Deleting the reservations for components of a production order without TECO

    Dear Gurus,
    I forgot to activate the backflush indicator in the beginning. I activated the backflush indicator in between. But for the confirmations already made I had to issue the material as unplanned consumption for the order. This is not clearing the reservations for the material.
    How to delete the reservations for components of a production order without TECOing the production order? My order is not completed.
    Thanks and Regards,
    Raghu

    Hi Kumar,
    I have a production order for 1000 header (A) qty. My control key is PP03 (auto goods receipt from confirmation in CO11N).
    For this order the component B qty is 1000 (BOM consumption is 1:1)
    Without doing GI, the confirmation is done for 300 A qty. I realized that auto GI is not done for the 300 qty of component B as there was no backflush indicator.
    Now the backflush indicator is activated in the production order for component B.
    In the next confirmation for another 300 A qty, automatic GI is posted for 300 B qty because of backflush now.
    Now my confirmed and GR qty for A in two rounds is 300 + 300 = 600.
    GI of component B done is only 300 (through backflush).
    Qty yet to confirm = 400.
    So I did GI of 300 B qty through MB1A (which is an unplanned issue). This does not update the withdrawn qty in the production order. Also the reservations for component B for this 300 qty are not reduced in the system.
    Now the reservations against the order for component B = 1000 - 300 = 700 (which is 300 more than the qty yet to confirm).
    Now when I run MRP for another 2000 qty of A, the procurement proposals for B will be 2000 + 300(undeleted reservations) = 2300. Though the system is behaving properly, this 300 is additional and unwanted.
    For this reason I need to delete these reservations before the MRP run. As order is still open, I cannot TECO the order. Nor can I clear all open reservations from CO11N.
    Thanks and Regards,

  • Can u tell me the tables for field Cross company Purchase Order.

    Can u tell me the tables for field Cross company Purchase Order.

    check below link...
    http://help.sap.com/bp_bblibrary/500/Documentation/J53_BPP_EN_DE.doc

  • Reversal of components issued to Production order

    Hi Gurus
    I have a problem during reversal of components issued to production order.
    i issued 100 nos of components to production order thro co27.
    When i do reverse 50 components thro MB1A (262 movement type)
    the system is not reducing the reversed components qty. in the production order components overview ( Qty withdrawn).
    One more issue is,
    When i create rework order thro' co07, i have selected the ref. opn set what i have created. Then i entered the settlement rule against production order.
    After that system giving error message "No task list for selection ID 01 for auto task list selection found.
    With out considering this message, i did confirmation, i am not getting the  rework order material in the stock ( control key with auto GR).
    Please advice me.
    Thanks & Regards
    Bala

    Bala,
    In transaction MB1A, use the following procedure.
    1. Execute transaction MB1A.
    2. In the Intial screen enter movement type as 262, Plant details and storage location details and then click "To order" button or Shift+F1).
    3. In the Popup screen enter the order number against which the reversal has to be performed and Enter in keyboard.
    4. System default proposes all the components which were Issued, enter the quantity for the material you wanted to reverse, remaining materials leave the quantity blank.
    5. Adopt and Post the Goods movement.
    This would now reduce the Goods withdraw quantity.
    Probabaly previously you were trying to enter the Order number in the second screen, what this means is that the system would consider this as "Unplanned Goods Movement", hence this movement does not gets updated with referance to reservation.
    Hope this resolves your problem.
    For your rework related query, request you to open a new thread if it is not answered here.
    Regards,
    Prasobh

  • What are the tables for Partner Fuction regarding the Vendors Purchasing ?

    Hello Gurus,
    What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
    Thanx in advance,
    Ramona

    Hi Jürgen,
    I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
    I am not sure if I understand what are these. I just want the table to upload the data to BW.

  • Table for characteristics values in the sales order

    Hi Experts
    I am entering the characteristics values in the classification screen in the sales order.
    I want to capture the characteristics & values with reference to the individual sales order for reports.
    Please let me know the tables for the same as it doesn't get capture in the item table..
    Thanks
    Ganesh
    Edited by: jganesh on May 4, 2011 1:26 PM

    Hiii,
    you may use VELO01_GET_CONFIGURATION function module to pass VBAP-CUOBJ value
    Hope it will solve your problem.
    Regards
    Shambhu Sarkar

  • Wht r the standard tables for vendor customer and sales order report/

    Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

    Hi
    Customer is related to Sales Module
    So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
    CUstomer and Vendor related tables with important fields:
    KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
    KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
    KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
    KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
    KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
    KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
    KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
    KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
    KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
    KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
    LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
    LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
    LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
    Sales related Tables for a customer
    VBAK: Sales Document(Header Data) (VBELN, KUNNR)
    VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
          Enquiry, Quotation, Sales Order are differentiated based on Doc.
          Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
          for Quotation 'B' & for Order it is 'C'.)
    LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
    LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
          (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
    VTTK: Shipment Table (Header Data)(TKNUM)
    VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
          (VTTP-VBELN = LIKP-VBELN)
    VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
    VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
    VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
    VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
    VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
    VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
    VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
    VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
          (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
          Apart from these tables there are lot of other tables which starts with
          ‘V’, but we use the following tables frequently.
    VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
          VBTYP= ‘C’(Sales Order) VBTYP=’J’(Delivery) VBTYP=’M’(Invoice) 
    VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
    VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
    VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
    VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
    VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
    VEDA: Contract Data(VBELN,VPOSN)
    VEDAPO: Contract Data(VBELN,VPOSN)
    Vendor related MM tables
    EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
    EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
    EINA—- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
    EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
    ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
    EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
    EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
           RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
           For RFQ it is ‘A’ and for PO it is ‘F’.
    MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
    MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
           Apart from this there are lot of tables which begin with 'M'& 'E', but we
           use the following very often.
    EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
    EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
    EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
    EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
    Reward points if useful
    Regards
    Anji

  • Writing a trigger to update the QOH in a Parts table for for each item of the order whenever the order is filled. The trigger is for the OrderItem table when an item record is inserted into the OrderItem table.

    Any ideas?

    Hi,
    If orderitem and parts are the only tables involved, and each orderitem references only 1 part, then it's pretty simple: just update parts, like this
    UPDATE  parts
    SET     qoh       = qoh - :NEW.quantity
    WHERE   part_num  = :NEW.part_num;
    If you can modify filled orderitems (e.g., DELETE orderitems or change the part_num after the order is filled, or change the status from filled back to unfilled then it's more complicated; you might have UPDATE the :OLD.part_num as well as the :NEW.part_num
    I hope this answers your question.
    If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Since you're asking about a DML statement, such as UPDATE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • Tables for credit Memo and Purchase order

    Hi all,
    I need to develop a report to dispaly all the credit memos for the open qty,
    My issue that is  there any table where we can have information for credit memos and purchase order,
    like the input fields is company code,customer number,fiscal year,
    hope you understnad,
    Please let me know if you need any more information,
    Thanks&Regards,
    Cghand

    Hi
    Invoice Verific. table:
    RBKP - Document Header: Invoice Receipt
    RSEG - Document Item: Incoming Invoice
    Regards
    Prasanna

  • For all entries changes the order of the itab

    Hi Experts
                 In the following query i have used two internal tables namely it_first and it_zlist.
                The material inwhich the it_zlist is different sorting order
          After executing this query, the order of the material inwhich the it_first is different from the it_zlist.
                 What could be the reason, pls explain me on this.
    select matnr test zsno ztnam from zmaster1
                into corresponding fields of table it_first
                      for all entries in it_zlist
                      where matnr = it_zlist-matnr.
    Thanks in advance.
    Regards
    Rajaram

    for all entries u should specified all primary key.
    sort by u condition.
    Effect
    If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
    The internal table itab must have a structured line type and the component comp must be compatible with the column col.
    The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
    The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
    Notes
    In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
    The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
    If the additions PACKAGE SIZE or UP TO n ROWS are specified together with FOR ALL ENTRIES, they are not passed to the database system but are applied instead to the resulting set once all selected rows on the application server have been imported.
    With duplicated rows in the resulting set, the addition FOR ALL ENTRIES has the same effect as if addition DISTINCT were specified in the definition of the selection quantity. Unlike DISTINCT, the rows are not deleted from the database system but are deleted on the application server from the resulting set.
    Addition FOR ALL ENTRIES is only possible for WHERE conditions of the SELECT statement.
    Example
    Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.

  • AFRU table when a confirmations at the order level is entered?

    Hello,
    I know that the users can enter a confirmation in the operation level (with the co11n transaction) or in the order level (with the co15 transaction).
    What I want to know is if physically, in the AFRU table, when a user confirm directly an order (co15), do we find lines of confirmation for all the operations with quantities for all the operations (proportional) or just one line with the operation empy (at 0 for exemple) and all the quantity in this line?
    Thanks a lot,
    Regards,
    Julien

    Hi,
    When you confirm order using CO15 at order level, there will be only one entry in AFRU table for all operations and Operation field in the AFRU table would be blank.Only Order number woule be present.
    Regards,
    Krishna Mohan

  • Accounting for discounts given at the order entry level

    Hi,
    I'm Anil Wadhwa and I'm working for Amtrex Hitachi Appliances Ltd., Ahmedabad, India. we have implemented Oracle applications 11i and I'm part of the Order to Cash cycle specifically handling the OM Module.
    Initially I had the problem of using the discount feature available in Oracle Advanced Pricing and now I have got the solution for the problem.The problem I was trying to explore a feature whereby I was setting up a qualifier where I'm defining the Customer Class as 'DLR' which would be eligible for discount say @10%.
    I subsequently set up a modifier where I defined a modifier type discount @10% and attached it with predefined qualifier at both the header and line level.
    When I was trying the order entry the price which was defaulting from the attached price list was not getting reduced by 10%.
    Now this problem has been solved by giving a request from the 'Oracle Pricing Manager' called as Build Sourcing Rule.
    Now I want to know is there any way of accounting the discount given.
    Say my list price is 100 and i have given a discount of 10% and my selling price becomes 90.
    Then
    Debit Credit
    Customer 90 Sales account 100
    Discount 10
    How should I do the setup for discount and make sure that when the modifier gets applied whatever is the discount goes into the appropriate accounting setup.
    I will be obliged if somebody can guide me on this issue.
    Thanks & Regards,
    Anil Wadhwa
    [email protected]

    Anil,
    have you used any algorithms for ariving at discounts?
    Thanks
    AGK

  • Authorization restriction for Goods issue against an Order

    Hello All,
    We have a situation wherein the user is able to issue goods using tcode MIGO by choosing Goods issue --> Others and mentioning an order number that belongs to another plant in the account assignment tab and issues a material which belongs another plant.
    For eg we have material A that has been created for plant 1. The user issues the material (movement type 261)and the account is assigned to an order which has been created for plant 2.
    I could not find any authorization object that restricts this.
    I checked the objects M_MSEG_BWA and M_MSEG_WWA and he has authorizations only for plant 1 and all movement types.
    Any pointers to restrict this access will be appreciated.
    Thanks & Regards,
    Subramaniam Iyer

    Hi,
    MIGO transaction by default restricted with Plant.  If you say that the user A is having access to only Plant 1 & 3, but not for 2, please check the below authorization objects does not have any manual objects inserted into the Role and restricted with the value only in organization field.
    M_MSEG_LGO
    M_MSEG_WMB
    M_MSEG_WWA
    M_MSEG_WWE
    This issue may occur because if the objects are maintained manually in the role.  If so, when you check in the organization field, it may not be showing the value which are manually added into the manual object.
    Also, please check the other roles are assigned to the user.  If any of the other roles assigned to the user having any of the above objects with * value, this may provide the user to do the Goods movement for any plant.
    To check the issue, please go to SUIM and check the user under "Roles by Complex Selection Criteria" and make sure that you are checking the objects for the particular user.  This should be able to identify whether the user is getting access from any other roles assigned to the user.
    Regards
    Anandm

Maybe you are looking for