After 5.0 update can not restore phone
I updated to 5.0 then my Iphone 3GS was blank. I tried to restore my phone several times and it keeps saying unknown error. Now my phone is blank. It keeps saying plug into Itunes.
Search Google for "iphone 3g ipsw" (does not matter which one in your case, just need to restore your phone, then can do whatever). Open iTunes with your phone connected. Shift click on "Restore" (Apple click for Mac) and choose the IPSW file you downloaded. That is called a manual restore. Should help you out.
BF
Similar Messages
-
can not restore i phone 3 G after i tune update, can not restore i phone 3 G after i tune update
Search Google for "iphone 3g ipsw" (does not matter which one in your case, just need to restore your phone, then can do whatever). Open iTunes with your phone connected. Shift click on "Restore" (Apple click for Mac) and choose the IPSW file you downloaded. That is called a manual restore. Should help you out.
BF -
how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?
how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015 -
haven't you have problems trying to upgrade to iOS 4.3.5? I installed MAC OS 10.7 and now I'm receiving a message saying that I don't have the rights, however I can sync it without any problems.
Sorry to be so late getting back to you. My furnace died and I was a week without heat. Everything's ok now.
I was able to grab an old firefox from an external drive (thank God for backups!) and I used that along with the link that you sent me for older versions and I was able to download the version before the current update.
Thank you for your help. -
After updating my 3gs to ios5.0.1, I can not restore my phone. It says session failed after about 20 seconds. It appears to be a restore point available. What should I do?
Hi all,
I work for an Enterprise with around 30 devices so far, 5 of them have been upgraded to iOS 5.01 and we are having this issue, the steps below are appearing, these are both on iphone and ipad 2's with exchange 2003:-
- Exchange Calendars not sync'ing, but Yahoo account working fine.
- Create an appointment on the ipad / iphone and this sync's with Exchange.
- Close the Calendar and re-open the appointment disappears, but stay's within Exchange.
- Meetings created within the Exchange Calendar do not synch with the iphone / ipad.
This is starting to cause a lot of issues.
Thanks
Keith -
hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks againIt is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update -
hello
i have a an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of version.it is important that i update my i Phone by itself not with iTune . after that my device can not join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem is remaining . if there is any solution share with me and i be very thankfulness of you.tanks againIt is not possible to downgrade to an earlier version.
Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update -
After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...
Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later. -
I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?
Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone. -
TS3694 i can not restore my i phone 3g an error is 1015
i can not restore my i phone beacuse an error is 1015
All you can do is to update your iTunes to the latest version.
Connect your iPhone to the computer and open up iTunes, put your iPhone in DFU mode. Here is the instruction video : http://www.youtube.com/watch?v=ofpinyGlQ8I
Then as your phone is detected in recovery mode in iTunes, (which is actually DFU mode), hit the restore button, there it will download the latest iOS which would be (4.2.1 in your case), it might take a while to download it depending on your internet speed. Then it will be restored automatically!
Then you are good to go! -
i can not restore my i phone it reads error 1015.its firmwear can not be updated. please help me restore the firmwear on my 3g i phone.
Google "Error 1015" and you will get your solution.
-
Restore back up of my iPhone-password not recognised. After restore, itunes can not restore because it says the password is incorrect. But I can sign into my apple account with the password. My iPhone is now set to factory settings as a new phone, what can i do to access the back up from my phone before I reset it.
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.
Your only recourse is to force it into DFU mode:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings. -
I can not restore my IPad and I can not update it . I tried with ITunes and with the device as well
Any help. PleaseIt really helps if you describe what is happening, otherwise there is no way to offer meaningful suggestions. Just saying "I can't ..." Doesn't tell us anything helpful.
-
Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?
See if you can force the phone into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Maybe you are looking for
-
CR Drilldown Error by IE, but not by Firefox
I designed a CR report with 3-levels drill down (by hyperlinking a new report rather than subreport) and published it to BOE. I open the report by IE and drill down the new reports in a new window, the report content in the original window disappea
-
Macbook air, top of the screen flickers occasionally.
Hi, I have a 11-inch macbook air, mid-2012 according to my "About this Mac" and it works like a breeze except for a single issue. Every so often, completely unpredictably, the top of the screen will be flickering when I open the computer up. It goes
-
I used Firefox yesterday morning and it worked fine. I went back to my computer yesterday afternoon and Firefox wouldn't open. I've tried everything. I even updated Firefox. But it still won't open. I have the Windows 7 operating system. Is there a c
-
What is the actual speed at which the time capsule router can transmit?
I am consistently getting only 40% of the speed of my ISP when I use wireless via my time capsule vrs a direct connection to the isp modem. I would just like to know how fast the wireless can transmit? Is it the bottleneck, something else I should be
-
Can I duplicate a RAW image as a JEPG without exporting then importing?
I would like to duplicate a RAW image as a JPEG. Is this possible to accomplish within the Aperture library without exporting then importing?