After chang pwd PISUPER getting error in SLDCHECK not working T-C:SXMB_FIR
Hi All,
After changing PISUPER password at ABAP side i got the below error in SLDCHECK.
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
=> Check whether you can access the XI Profile using a web browser!
& Even when i execute SXMB_IFR getting the below error,
3: Error while reading configuration for secure communication
Message no. SAI_GLOBAL030
One more is PISUPER I also changed in exchangeprofile of connection.
Please help ASAP.
Regards,
Karthik.
Edited by: Karthiksap on Jul 25, 2011 9:50 AM
Hi Naveen,
Now i given old password to PISUPER using SU01. But still i am getting the below error when i access sxmb_ifr
error log:
3: Error while reading configuration for secure communication
Message no. SAI_GLOBAL030
and also in sldcheck getting :
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
=> Check whether you can access the XI Profile using a web browser!
In exchangeprofile->connection link i changed pisuper password, do i need to update this. Please also let me know after chaning j2ee_admin do i need to update anywhere.
Regards,
Karthik.
Similar Messages
-
CS5 Configuration Error - Even after changing permissions - still get error
I have tried several attempts to install CS5 and keep getting a configuration error...I have updated permissions as instructed but it still does not work - please help?!
A clean reinstall will work for you run the cleaner tool from Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6and than reinstall the application from Download CS5 products
-
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Unknown server error after changing password, solutions on support side don't work
After changing my password I get the "unknown server error". I already tried the solutions on the support side, but it won't work.
My system is Win 7.
I'd be so glad for any ideas,
thanksThanks for your answer. Yes, i already tried these solutions (more than
once!) but I still get the error and can't connect to the cloud.
I'd be so glad for any ideas!
Thanks in advance, take care,
Ulinna
2013/10/11 Arpit Kapoor <[email protected]>
Re: Unknown server error after changing password, solutions on support
side don't work created by Arpit Kapoor<http://forums.adobe.com/people/Arpit+Kapoor>in
Adobe Creative Cloud - View the full discussion<http://forums.adobe.com/message/5753065#5753065 -
After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.
thanks...figured out my problem!
Date: Wed, 3 Feb 2010 12:24:29 -0700
From: [email protected]
To: [email protected]
Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
What happens if you try to print to the Adobe PDF printer?
> -
Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?
Go here (You may need to use the chat option.):
Activation & Deactivation Help
This is the Photoshop Forum.
Note to mod: Please move to the Photoshop Elements forum. -
Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I am having a terrible time trying to convert my QT file to an AVI file so I can use in PowerPoint. I am getting Error 43 File not Found, any suggestions?
Hi Jenna,
The error your getting suggests a file path problem.
How are you embedding the movie in PP and where is the movie file located relative to the PP file? Are you getting this error within PP when the slide containing the embedded video is displayed?
If you embed a movie and then move it or change its name then PP will generate this error.
Alastair. -
Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.
Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again. -
Hi sap installation getting error like sapgui not connectyed to localhost mechine
hi sap installation getting error like sapgui not connectyed to localhost mechine
Hi ,
Can you please update where did the installation fail and installation fail logs.
did you manually try to start sap? what does the start log say after staring up. did you install the system with some ip in the host file . Which os u are doing the install. is the data base process running.
Thanks
Rishi Abrol -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Revision: 4939
Author: [email protected]
Date: 2009-02-12 10:07:37 -0800 (Thu, 12 Feb 2009)
Log Message:
* Some changes necessary to get the improved SWC cache working in Flex
Builder 4 and some potential bug fixes.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-18905
API Change: NO
Reviewer: Pete F.
Code-level description of changes:
tools/oem/Library.java
Modified link() to pass the file name into SwcDynamicArchive's
constructor even when using an OuputStream, so the file name can
be used as a cache key.
Added refreshLastModified() so Flex Builder can update the
timestamp in the SWC cache after writing it's OutputStream to the
SWC file.
tools/oem/Builder.java
Added setSwcCache().
tools/PreLink.java
Modified postRun() to use the value returned from
ResourceContainer.addResource() instead of the value passed in,
because it could be different. This might fix SDK-18493 and
SDK-17840.
compiler/PersistenceStore.java
Modified readCompilationUnit() to also use the value returned from
ResourceContainer.addResource().
compiler/CompilerAPI.java
Modified updateDependentLastModifiedTimes() to check for a null
CompilationUnit.
compiler/swc/SwcDynamicArchive.java
Added path param to OutputStream based constructor to be used as a
cache key.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18905
http://bugs.adobe.com/jira/browse/SDK-18493
http://bugs.adobe.com/jira/browse/SDK-17840
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/PersistenceStore.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcDynamicArchive.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcGroup.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Builder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/LibraryCache.javaI figured out what was going here. When I was statically linking my copy of textLayout.swc, it wasn't being loaded soon enough and the other parts of the framework were barfing because they couldn't get at the TextContainerManager class when they expected to find it. What I have done to solve the issue is created a custom SystemManager which forces the TextContainerManager class to be loaded sooner. This does increase my file size a bit, but not nearly as much as having to statically link all of the framework's libraries! Here is a short example app of what I did for anyone curious:
main.Main.as :
package main {
import spark.components.Application;
[Frame(factoryClass="main.CustomSystemManager")]
public class Main extends Application {
public function Main() {
super();
MainApplication.mxml :
<?xml version="1.0" encoding="utf-8"?>
<main:Main xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:main="main.*">
</main:Main>
main.CustomSystemManager.as :
package main {
import mx.managers.SystemManager;
import flashx.textLayout.container.TextContainerManager;
public class CustomSystemManager extends SystemManager {
public function Custom Manager() {
var c:Class = TextContainerManager; // force the inclusion of this class
super();
I found a lot of good information for using a custom system manager (in the context of making your preloader a bit shinier here: http://custardbelly.com/blog/?p=211 -
I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error isPlease mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan -
How can I change my original security questions? After changing my AppleID and password, I am not given an opportunity to change my security questions, which I cannot remember the answers to, so I cannot purchase any music.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us
Call Apple Support in your country: Customer Service: Contacting Apple for support and service
Maybe you are looking for
-
Purchased album and all songs do not play completely. Please help
I recently purchased an album on Itunes and some of the songs from the album do not play completely. They start and then stop a few minutes in. I called customer service and they said to redownload the album but its not giving me that option. My I
-
RDS 2012 - using Virtulization Host role on HyperV Servers hosting VMs
I have an existing RDS2012 farm which is working great with Session Hosted Desktops. I'm looking to evaluate pooled Windows 8.1 desktops and know I need to run these on HyperV servers with the RDS Virtualization host role installed. I have an existin
-
Error in developer instllation in windows 7
hi i have error when try to setup developer 10g this error http://aishaa.net/setup.png please what can i do to solve this problem ? thank you
-
Storing a file.......
Hi guys, i'm a problem during my application's development. How can i store an array of byte (x in my function i've posted) in a file? Can you help modifing my code? Thanks Here is my code public byte[] getBytes(){ byte middlerow=' ';
-
How to hide the cover page when printing ?
Dear all, I would like to change printings option for the report S_ALR_87013611. I would like to hide the cover page (with parameter) when printing. How can I do that ? Thanks for your help Best regards