After completing a scan of 15 pages I can't find where the scanned files have been sent.
After completing a 15 page scan I find I can't locate where my files were sent. Help! Thanks,Firstsergeant
Since it seems App related, I'm not sure what to offer you. I guess the only suggestion I have is for you to reboot your iPad and then try again. To reboot, hold the power and home buttons at the same time for at least 10 seconds (keep holding past the swipe to shut down bar if it appears) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data, so it's worth a shot.
Similar Messages
-
Hello I am having problems viewing areas of a pdf...it's a form fillable pdf that someone else has completed and saved..I'm able to view all but the areas that have been filled in.. any info would help
Hi Bob, I just tried your suggestion, but the interactive PDF is in spreads by default, no way to change the setting. When I choose to view by single page in Acrobat, it displays a single spread.
When I choose to view by spreads, it displays 4 pages, two spreads. That's the topic of this whole discussion, I believe. I do own CS 6 at home, however my employer supplied me with CS 5.5. And I have very little, if any, influence on purchasing.
So, I have no good way to make an interactive PDF (with differing recto/verso headers and footers), that is accessible and shows the correct header/footer. It's either single pages (with one header/footer), or recto/verso headers/footers but PDF only as a spread, as well as I can tell.
Unless you know something else I can do...
Best, Marilyn -
Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive
Here's the scoop, new friend.....
When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward. -
i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios
EExactly what settings are you using. Some go to iTunes.
-
after connecting my hard disk to a windows laptop all my files have somehow converted to .ink files and are not accessible.....what do i do?
What do you mean by "all files", surely only one category of files got their default open program changed.
Choose the affected files, right click on an individual file, and "open with",...change to default program.
For a group, right click > show info > open with > change ALL
If more than one group of files has had its default opening program changed, a time machine roll-back would be the easy option. Do you have a TM backup? -
To reproduce:
Right click an element -> Inspect Element.
Uncheck any style value in the right-hand menu, or add one.
Refresh (Command-R) now comes up with a warning that the Inspector will be closed and changes will be lost.
Can I turn off this warning, or dismiss it using a keyboard shortcut?
I guess there's the lingering feature request of keeping the inspector open on a page after a refresh, but that's a more involved change than turning off this warning. A simple boolean in about:config would be great.To reproduce:
Right click an element -> Inspect Element.
Uncheck any style value in the right-hand menu, or add one.
Refresh (Command-R) now comes up with a warning that the Inspector will be closed and changes will be lost.
Can I turn off this warning, or dismiss it using a keyboard shortcut?
I guess there's the lingering feature request of keeping the inspector open on a page after a refresh, but that's a more involved change than turning off this warning. A simple boolean in about:config would be great. -
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!
Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!
-
I can't purchase dragon story gold? It's ask me to go to Itunes Support to complete transaction but I can't find where to complete it.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page . When you've filled in the form you should get a reply from iTunes within 24 or 48 hours.
-
Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?
DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now? -
I have been sent a 'word document' in which are a series of boxes about thirty lines long to insert written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout
You can't change the way Pages import .doc files.
It was never written that it reproduce exactly the original one.
From my point of view, as I refuse to give a cent to M...soft, the best way to deal with documents issued by their Office suite is to use the free libreOffice.
Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 11:34:19 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and give the extension name is plz tell me the way that office files are compatible with it.
== This happened ==
Every time Firefox opened
== when i download the office filesIn Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I have mac book pro 10.5 Leopard
Have just started using iweb and have small site of about 5 pages, plus blog. I have yet been able to publish, each time I try iweb crashes and receive following note -
The application iweb quite unexpectedly. The problem may have been caused by the FTPKit Plug-in.
I have tried a few troubleshooting methods recomended on other threads, ie. deleting caches, copying domain and reboots... but no luck.
Any help very much appreciated.Reinstall iWeb from the source you got it from originallhy. Or, if you're running iWeb 3 download and apply or reapply the iWeb 3.0.4 updater. It included that plugin.
OT -
Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?
Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario -
Hello, I have creative cloud installed on my Mac Book Pro - OS X 10.9. 5 When trying to download trial programs, a popup window shows the message " you have been disconnected" Connect to continue. The same message comes after repeated attempt to entering the login and password info. How can I solve this?
Hi Jeff,
Here is the screenshot of the window which comes after any attempt to download a trial version. It is in French, it means you have been disconnected, connect to continue.
Maybe you are looking for
-
I have linksys wrt610n router and my isp is verizon fios. I am trying to connect the linksys router with the verizon router but it doesnt connect to the internet when trying to setup with my laptop. I can connect to the internet with only the veriz
-
Linking Balance Score card to EP
Dear All, I have created the Role in BW and assign the Balanced score card web URL to it and uploaded to EP. It is working fine in Development. I transported my role to BWQ client and again uploaded to QA -EP. But when I am executing the Balancescore
-
How to Possibal in Profit Center Mandatory in AR Invoice
Dear Experts, How to Possibal in Profit Center Mandatory in AR Invoice through SP_Transaction _Notification ?? I have write the code below <If @object_type = '13' and (@transaction_type = 'A') begin IF EXISTS (SELECT DOCENTRY FROM inv1 WHERE (ocrcode
-
Adobe live cycle desinger will not open after trial download and install
Page opens and on selecting "new form" generates the microsoft error box stating that it has encountered a problem and must shut down. Have removed Acrobat Pro 7, cleaned registry and insituted install repair. Assistance appreciated cnlulham
-
Odd appearance of documents and emails in 10.6.4
Since upgrading to Snow Leopard, occasionally documents and emails look on screen as though the "ink" had smeared. Also, there's sometimes a horizontal line across the listings in a specific mailbox. Is this a curable Snow Leopard problem, or does it