After connecting Apple TV to my Television set, everything worked good except the audio. Then when I desconnected the Apple TV I lost the audio on my TV set, anybody can help?
After successfuly connected my Apple TV to my Television set (Haier brand) everthing worked except the audio. Then when I desconnected my Apple TV I lost the audio on my TV set any help will be appreciated it?
Hi there Chaq59,
You may find the troubleshooting steps in the article below helpful if you are experiencing audio issues with your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
-Griff W.
Similar Messages
-
Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor -
To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks
papiciulo wrote:
To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks
Go to the iTunes store on the phone and "buy" any free app. This should fix the problem. -
I cannot get sound through cable box after connecting apple tv
I cannot get sound through cable box after connecting apple tv, any suggestions?
Perhaps you disturbed or loosened the HDMI or other cable from the cable box to the TV?
-
after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok
i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK
-
I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanksCan anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta. -
Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?
Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari -
My Imac drive just died. Always backed up with Time machine to a WD My Passport. But after connecting it to my other imac (also running Snow Leopard) all the files are missing. I click on backup.backupdb but no files - just applications. Any ideas?
Welcome to the Communities.
We want to help you but unfortunately you have given us insufficient information.
Please find a moment to tell us more about your machine, the model identifier, the OS version, and the total amount of RAM you have. It also helps to know where you are, nothing specific, just the country. Macs do not run on iOS 6.1.6 as your profile says.
Then fill those same details in your profile for future use
These documents may prove helpful .. Solving Time Machine problems Pondini FAQ
http://pondini.org/TM/ Troubleshooting.html -
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.
You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I saw a message "cannot get mail. The connection to the server failed". Anybody can help pls? I did try to delete the account and add back. Also tried to reset/ reboot the iPad but still effortless.
Hi all, I finally solved the issue. Here I wish to share with you all. First, I delete my hotmail account from mail account. Secondly I reboot my ipad2 with holding sleep and home button at once untill the apple logo is appeared. Then I add back the hotmail account. Done. Hope it helps. Thank you.
-
My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?
Hi LanaJay84,
If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Regards,
- Brenden -
I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?
Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion. -
Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?
I'm having the same problem. I wish someone could respond with a solution for this! I've paid money for new songs and can't listen to them because of this! WTH APPLE?!?!?!?!
-
I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?
I apologize. I misread your statement.
The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages - Support - Apple
Maybe you are looking for
-
Stock transfer from excisable plant to nonexcisable
Dear All, My scenario is i am selling (proforma invoice) material "Carton" from my XYZ plant(Excisable) to ABC plant(Non excisable) Also i am not paying for this and it will be against proforma invoice. Material value is 100 per unit with excise valu
-
we just bought an ipad 2 for Christmas and we hooked it up to laptop and it worked great, we love it. But now I cant open itunes on my laptop i get this message"the file itunes.it cannot be read because it was created by a newer version of itunes" a
-
Hello, I'm new to this forum. My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system,
-
Hello, We are implementing a new portal, and having trouble deciding on the user store for the portal. Scenario: u2022 The main functionality of the Portal is dependent on the SAP Systems (ESS\MSS), and BW System. u2022 Currently there is no
-
Connected to airport wifi but not connected to internet
I am using an airport wifi - time capsule. The internet works on my Mac which is wired in; however when I try the wifi I can connect to the airport network I made and have used for years but a the network does not connect to the internet. I have po