Stock transfer from excisable plant to nonexcisable

Dear All,
My scenario is i am selling (proforma invoice) material "Carton" from my XYZ plant(Excisable) to ABC plant(Non excisable)
Also i am not paying for this and it will be against proforma invoice.
Material value is 100 per unit with excise value 1021= 13 (which i have paid when procured the material)Total value = 113
After stock transfer i want excise accounts of xyz plant should reversed (as i cant take benefit of this excise value which is 13 rupees) I want material master value of 100 rupees of my "Carton" material should get credited from my XYZ plant and material master of my ABC plant should get debited with 113 value (13 rupees of excise should go in material master value as this plant is non excisable)
Please let me know how to configure the same / suggest the route to do the same
Thanks,
Naren

Dear,
But it is not getting loaded on material as you cant assign stock account again for another transaction key.(It is giving error that Already it is assigned for BSX)
Entries happening are
Stock account - Credited from excisable plant's business area - 100-
Stock account - Debited to non- excisable plant's business area - 100+
Other losses material (key is AUM) - 10+
Material overheads - 10-
Please tell me the whole process
Naren

Similar Messages

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

Stock Transfer from one plant to another

Hi Gurus,
We have this scenario
My client is doing Make to Order business. All materials planned under MRP and low value items are planned under CBP.
My question is if one plant require materials from MRP planned materials then how we make the stock transfer with billing.
Suggestions will be appreciated.
Thanks & Regards
Pranaya

hi
Follow the steps :
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2 Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4.In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5.Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM> Purchasing > Purchase Order > Set up STO> define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM> Purchasing > Purchase Order > Set up STO> assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO>Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21n and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:[VL02n
13. Billing:VF01n
Save the document and its done
reward points if helpful
regards
chetan

Sales Order Stock Transfer from one plant to another plant

I am transfering sales order stock from one plant to another, using movement type 301E MIGO.
But when i go to Detail Data tab i found the Dst tab gray and only special stock field is appearing in grey there. So when I input all the data in from box it also copied in destination box. I also went to where tab page but the same data is appearing in both area from and destination.
In my opinion both area should be writeable, how can I make the detination detail available in there and should be writeable.
Please advice.
Best regards

Hi,
Please go to MB1B in that give movement type as 301 and SP Stock as E and provide Plant Storage location and press enter...
as well in MIGO select the Transfer Posting and provide Movement type as 301E and press enter If in OMBW the plant and Storage location is Mandatory then it will not go ahead for Posting.s
Try at your end.
Regards,
Ninad Kshirsagar

Stock transfer from two plants

Dear PP Gurus,
I am producing SFG at two different plants, from there i need to transfer to different plants where FG is produced using SFG. Now as per capacity, one plant is giving 70% and another giving 30% of reqmts. I am planning FG in the plant from where i want to create planned orders for SFG for both the plants.
So, reqmts for SFG is 1000 kg. Plant 1 will give me 700 kg and plant 2 will give 300 kg. so from one plant(Main), what settings to be done so that above reqmts can fulfilled. Please Guide.
If quota arrang. can be used please guide step by step procedure for the same.
Thanks in advance
Kailash T.

Hi!
Use quota arrangement. Create source list(ME01) for the SFG with one line item for each plant (enter in PPI column)) and make both as MRP relevant (1 or 2 in MRP column). Put quota arrangement usage as 4 in purchasing or MRp2 view of SFG. Create quota arrangement (MEQ1) and define quota % for both sources of supply.
I think this will solve your problem. Please revert back in case of any issue.
Regards,
Uday
Edited by: Uday Parchure on Jul 1, 2009 9:21 AM

Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)

Dear all,
The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
The question I want to post is relating to the transferred stock value.
When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
If using Stock Transfer process (move stock from depot to manufacturing),
1. Create Stock Transfer Order in ME21N using UD order type
      no accounting
2. Create DO in VL10B and goods issue
During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
   Dr Stock into manufacturing plant [this value by right, should be reduced as it consists of original excise duties in RG23D?]
      Cr Stock from depot plant
3. J1IJ- RG23D selection for excise invoice for delivery at depot
    no accounting
4. VF01 for proforma invoice
   no accounting
5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
     no accounting
6. Enter Incoming Excise Invoice by J1IEX
     Dr CENVAT Input AED
     Dr CENVAT Input BED
     Dr RG23A ECess
     Dr RG23A SHECess
           Cr CENVAT clearing
7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant.
Thank you in advance.

You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
Try this scenario in development server and revert back with your observations.

Stock transfer with excise duty

Hi Experts,
i have to do stock transfer from one plant to other plant when excise duty is invloved. and both plants comes under one company code.and receiving plant not paying any thing to supplying plant.please suggest me which process shall i follow.
Thanks and regards,
Balakrishna R.V

Hi,
The receiving plant should also registered for ED. Then when u do STO, after issue th goods, do J!is & j1iv. Later with the help of that document Capture Excise in other plant. So there in supplying plant the ED is deducted & in receiving plant the ED is taken as per law.
Regards
Pandari

Stock transfer from plant to depot

Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman Rana

Hi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
          inventory a/c   at plant 100 rs with standard price
          frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit    frieght and insurance clrg a/c 25rs
                   credit vendor a/c                     25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR

Stock transfer from a Depot to a manufacturing plant

Hi All
I am doing a stock transfer from a Depot to a manufacturing plant.
I have transfered the material from depot to plant and captured the excise
in register RG23D using transaction J1IJ.Now a goods receipt in done in
the receiving plant in refernce to the outbound delivery.
Now the problem is when a excise is captured using transaction J1IEX in
reference to a Goods Receipt and manually enter the details in the system , it gives me a
short dump of BCD_Divide by Zero.
Please advice

Hi,
Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
Regards,
Saurabh Diwakar

Stock Transfer of Excisable goods from Depot to Depot

Hi,
We are facing an issue with Stock Transfer of Excisable Goods from an excisable depot to another excisable depot which had arrived from an excisable manufacturing plant.
We are following the below steps:
1. Create STO PO at Depot A (ME21N)
2. Delivery of Goods from Depot B (VL10B)
3. Create Depot Excise Invoice at Depot B with reference to Orginal Manufacturing Excise Invoice (J1IJ)
4. Goods Receipt at Depot A (MIGO)
5. Capture Excise at Depot A (J1IG)
We are getting stuck at Step 5. When we are performing J1IG and entering Depot Excise Invoice or Original Manufacturing Excise Invoice, we are getting an error message as "Excise invoice does not exist in Supplying Plant".
Kindly suggest how to capture excise at Depot A.
Regards,
Debarshi

Dear G. Lakshmipathi,
We have tried your solution but we are still stuck at the same place.
In J1IG, if we enter the Depot B excise invoice and press enter, we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Original Manufacturing excise invoice and press enter, then also we are getting the message "Excise invoice does not exist in Supplying Plant".
If we enter the Depot B excise invoice and give a tick in the "Depot Excise Invoice" and press enter, we are getting into an infinite loop.
Kindly suggest how we can capture the excise at Depot A.
Regards,
Debarshi

Loading Excise from excisable plant stock to non exciseable plant inventory

Hi Experts,
I have seen all threads on SDN related to this but now i am writing my requirement. when i am transfering stock from Excisable plant to non excisable plant within same company code i want to load the excise on inventory on non excisable plant. for E.g i am transfering stock of Rs.100 + 8Rs excise from excisable plant i will book 8 Rs is excise account and want to recieve stock of value Rs 108 on recieving plant. Kindly suggest me for this.
Thanks in advnce

Hi,
Go to M/06, create new conditions by copying FRA1 for BED, ECS SECS stc. Now go to your stock transfer pricing, add these conditions after P101 & freight conditions.
Now while create STPO in ME21, maintain condition rate say 8,2,1,%.
When you will do PGI in VL02N, this excise amount will get inventorised in receiving plant.
Note that duties will get inventorised only if, price control of that material in receiving plant is 'V' else it will go to PRD account.
Regards,
Piyush

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Billing in Stock Transfer between two plants of two different company codes

Hi Friends,
I am doing the scenario of stock transfer between two plants of different company codes.
I have some issues in Billing for this..
What are the settings do i need to to for Pricing in SD point of view.
Ex:
Supplying         /         Receiving
Com.Code:2000     /        CompanyCode:1000
Plant:2100              /         Plant:1100
SA:2000/10/00      /          SA:1000/10/00
I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
I created Vendor 7777 and assigned Supplying Plant 2100 in add purchasing data.
In IMG Settings:
Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                    In Supplying Plant i assigned customer blank and sales area as 2000/10/00
Create Checking Rule: Standard(B SD Delivery)
Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
What are Pricing settings in SD i have to do?????????
Process:
ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
I have gone through many threads in Forum but confusion in Pricing Part..
Some are mixing with the inter company sales proces..
Pls guide me..
With Regards

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Material transfer from one plant to another

Hi expert
i am transfer material from one plant to another , for the same i have created a vendor in that i have assigned supplying plant, and in the Purchase order, i am need to use inventoried tax code.
For the same i have done transfer with 351 and i did migo , but i didnt get FI document for 101 movement
If it is development, how do we acheive this.
Let me know if you need more details on this. Appreciate your possible solutions to this.
Thanks
Rgds
Nabil

For the stock transfer within two plants in the same company code, Accounting document gets generated on doing goods issue.
Supplying Plant Stock/Account BSX gets credited
Receiving Plant Stock BSX gets debit.
After that its stock in transit for the receiving plant and by doing goods receipt you are just taking goods in so the accoun ting document does not get generated again while doing GRN.
If it is Company Code, it will be sale & purchase concept where in vendor & customer master are created in respective plant and the accounting entries for that scenario will be
At the supplying plant
Stock Account Credited
Cost of Goods sold Acc Debited
At Receiving plant
Stock Account Debited
GR/IR Clearing Acc Credited
You can also go through following link
Re: STO -FI document is not generate from the GRN
Regards
Sangeeta

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock transfer from excisable plant to nonexcisable

Similar Messages

Maybe you are looking for