After creating Adobe Web Gallery in DW Images do not show.

Hi, Hopefully
I can articulate my D.W. problem. I created a website with 4
total pages, 2 have small Adobe Web Galleries I created in Bridge, they both work in Live View and also work when I Preview in Browser, but when I upload to my web site... the 4 pages load but the 2 with Web Gallery load without the images ???    I checked the folders and all are in the proper places ??? Has anyone had a similar problem ???    Any help would be apppreciated THANKS. Pat

Hello!  Might you be willing to help me with my page?
I have my gallery embedded in this page:
http://www.stompandcrush.com/quisomnian.html
This is the gallery index html:
http://www.stompandcrush.com/graffitigallery_newyork_netaacc.html
Any help would be greatly appreciated!

Similar Messages

  • I am trying to create an responsive HTML5 output, but images are not showing up.

    When I preview my output, the images are note showing up. It is simply the blank outline of the image with the little image icon in the top left corner.
    As it is compiling I see the message "Warning: Image maps are not converted to relative size". Is there something in the setting that I need to change, or is that even the problem?

    Can you check your output folder: are the images copied to your output? If they are missing, are the images listed in the Project Manager pod in RoboHelp?
    The warning is unrelated. Since image maps work with pixel coordinates, you can't simply make them responsive. You are probably using an image map in your project. This is causing the warning. It is not a problem since the image map will still work. But if the image map is very large, it may give a bad experience on smaller screens. You may have to decide whether to change or remove the image map if you want to support mobile.

  • After creating new sales order through BAPI, it is not showing in VA03

    Hi Experts
    I am developing one program to create sales order using FM BAPI_SALESORDER_CREATEFROMDAT2. In output screen it is showing that the new sales order number created with new sales order number. But whenever I want to display the newly created sales order via VA03 it shows an error message SD document 10007547 is not in the database or has been archived but in program output it shows that 10007547 is created. This is in DEV server. Document numbers are generated by the system sequencially, but it is not reflected in database.
    I am also attaching my code below.
    REPORT  z_bapi_salesorder.
    DATA : gt_header LIKE bapisdhd1,
           gt_item TYPE TABLE OF bapisditm,
           gt_itemx TYPE TABLE OF bapisditmx,
           gt_partner TYPE TABLE OF bapiparnr,
           gt_return TYPE TABLE OF bapiret2.
    DATA : gs_item LIKE LINE OF gt_item,
           gs_itemx LIKE LINE OF gt_itemx,
           gs_partner LIKE LINE OF gt_partner,
           gs_return LIKE LINE OF gt_return.
    DATA : v_vbeln TYPE vbeln_va.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(30) ord_type FOR FIELD p_auart.
    PARAMETERS : p_auart TYPE auart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN SKIP 1.
    SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS       : p_vkorg TYPE vkorg OBLIGATORY,
                       p_vtweg TYPE vtweg OBLIGATORY,
                       p_spart TYPE vbak-spart OBLIGATORY,
                       p_sold TYPE kunnr OBLIGATORY,
                       p_ship TYPE kunnr OBLIGATORY,
                       p_matnr TYPE matnr OBLIGATORY,
                       p_menge TYPE kwmeng OBLIGATORY,
                       p_plant TYPE werks_d OBLIGATORY.
    SELECTION-SCREEN : END OF BLOCK b1.
    INITIALIZATION.
      ord_type = 'Order Type'.
    START-OF-SELECTION.
    *Header information data.
      gt_header-doc_type = p_auart.
      gt_header-sales_org = p_vkorg.
      gt_header-distr_chan = p_vtweg.
      gt_header-division = p_spart.
    *Partner information data.
      gs_partner-partn_role = 'AG'.
      gs_partner-partn_numb = p_sold.
      APPEND gs_partner TO gt_partner.
      CLEAR gs_partner.
      gs_partner-partn_role = 'WE'.
      gs_partner-partn_numb = p_ship.
      APPEND gs_partner TO gt_partner.
      CLEAR gs_partner.
    *Item data
      gs_item-itm_number = '000010'.
      gs_itemx-itm_number = 'X'.
      gs_item-material = p_matnr.
      gs_itemx-material = 'X'.
      gs_item-plant = p_plant.
      gs_itemx-plant = 'X'.
      gs_item-target_qty = p_menge.
      gs_itemx-target_qty = 0.
      APPEND gs_item TO gt_item.
      APPEND gs_itemx TO gt_itemx.
      CLEAR : gs_item, gs_itemx.
      CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
        EXPORTING
      SALESDOCUMENTIN               =
          order_header_in               = gt_header
      ORDER_HEADER_INX              =
      SENDER                        =
      BINARY_RELATIONSHIPTYPE       =
      INT_NUMBER_ASSIGNMENT         =
      BEHAVE_WHEN_ERROR             =
      LOGIC_SWITCH                  =
      TESTRUN                       =
      CONVERT                       = ' '
       IMPORTING
         salesdocument                = v_vbeln
        TABLES
         return                       = gt_return
         order_items_in               = gt_item
         order_items_inx              = gt_itemx
         order_partners               = gt_partner
      ORDER_SCHEDULES_IN            =
      ORDER_SCHEDULES_INX           =
      ORDER_CONDITIONS_IN           =
      ORDER_CONDITIONS_INX          =
      ORDER_CFGS_REF                =
      ORDER_CFGS_INST               =
      ORDER_CFGS_PART_OF            =
      ORDER_CFGS_VALUE              =
      ORDER_CFGS_BLOB               =
      ORDER_CFGS_VK                 =
      ORDER_CFGS_REFINST            =
      ORDER_CCARD                   =
      ORDER_TEXT                    =
      ORDER_KEYS                    =
      EXTENSIONIN                   =
      PARTNERADDRESSES              =
      IF v_vbeln <> space.
        COMMIT WORK.
        WRITE :/ 'Document', v_vbeln ,'created'.
        CLEAR : v_vbeln, gt_header.
        REFRESH : gt_partner, gt_item, gt_itemx.
      ELSE.
        WRITE :/ 'Error in creating document'.
      ENDIF.
    Please give the possible solutions for this. What is reason for that update termination.

    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
        EXPORTING
          ORDER_HEADER_IN           = ORDER_HEADER_IN
      WITHOUT_COMMIT            = ' '
      CONVERT_PARVW_AUART       = ' '
       IMPORTING
         SALESDOCUMENT             = SALESDOCUMENT
      SOLD_TO_PARTY             =
      SHIP_TO_PARTY             =
      BILLING_PARTY             =
         RETURN                    = RETURN
        TABLES
          ORDER_ITEMS_IN            = ORDER_ITEMS_IN
          ORDER_PARTNERS            = ORDER_PARTNERS
      ORDER_ITEMS_OUT           =
      ORDER_CFGS_REF            =
      ORDER_CFGS_INST           =
      ORDER_CFGS_PART_OF        =
      ORDER_CFGS_VALUE          =
      ORDER_CCARD               =
      ORDER_CFGS_BLOB           =
         ORDER_SCHEDULE_EX         = ORDER_SCHEDULE_EX
    use bapi_transaction_commit.
    Regards,
    Venkat

  • Adobe Web Gallery- can't get more than 10 images to show up

    I am trying to create a Web Gallery from within Bridge (CS4), but I'm not having any luck getting more than 10 images to show up when I create the Gallery, even though I'm selecting nearly 50 images (all in the same folder) that I'd like to be in the Gallery. Does anyone know if there's a limit to the number of images that can be used in an AWG? I can't seem to find ANY documentation that sheds light on that subject. All I know is that no matter WHAT I do, I can only get Bridge to create a Gallery with TEN images!! Very frustrating. Any help will be greatly appreciated.

    Assuming the obvious that in Bridge content panel you have selected all the
    files you want in the web galery
    First try a purge cache for folder using the menu Tools/purge cache for
    folder when having Bridge pointed to the problem folder.
    Second try a reset preferences with option key while restarting Bridge.
    I wish that were the case - it's only outputing up 10 images...

  • Sharing an Adobe web gallery

    After creating an Adobe web gallery how do I share it. I have tried to publish it on my apple computer (10.6) but seem to be missing a few steps. Any ways to share a m Adobe web gallery would be great.
    Thank you, Andy

    Looks fine in FF, but your Nav is a bit offscreen
    Adjust your CSS -500 sttribute

  • Photoshop deletes the security text while creating a web-gallery

    Hi!
    I unintendedly must have changed some settings in my photoshop 7, as the security text adding while creating a web-gallery doesn't work anymore.
    The steps for creating a web-gallery I go through and finally choose the text to appear on every picture. However, while creating the web-gallery, photoshop automatically first adds the text, then deletes the text layer so that at the end no text appears on the picture, when the web-gallery is ready.
    Can someone help me? I am trying to fix it for the last two weeks and I am sure it's got a very simple reason.
    Thanks a lot in advance!
    Cüneyt

    I am really desperate. Isn'T there anyone to help?`
    Now here are the steps the Photoshop goes while creating a photo gallery. After I'Ve chosen the presettings (image sizes, security settings etc.)
    1) Open
    2) Type Tool (here it types the security text onto the picture)
    3) Rotate
    4) Select Canvas
    5) Align Bottom Edges
    6) Align Right Edges (Because I asked to place the text at the bottom-right corner)
    7) Move (Moves the text to the corner)
    8) Deselect
    9) Delete Layer
    10) Image Size
    For what the hell it makes the step 9, where it deletes the layer, which is practically the text? First it puts the text onto the picture, then it deletes it again.

  • Adobe Web Gallery

    Hello,
    I have created a web gallery using Bridge in DW CS4 to add to my html website (saved it to disc and added a link then). I'm just wondering how I can have the website navigation menu in the gallery page. I can't create any way to get back to the homepage or other pages after visiting the gallery.
    Thanks

    Assuming the obvious that in Bridge content panel you have selected all the
    files you want in the web galery
    First try a purge cache for folder using the menu Tools/purge cache for
    folder when having Bridge pointed to the problem folder.
    Second try a reset preferences with option key while restarting Bridge.
    I wish that were the case - it's only outputing up 10 images...

  • Web gallery full size images blurry on .mac

    My photos look great in iPhoto. But when I have iPhoto create a web gallery and sync it to .mac the full size images are quite blurry. The thumbs are fine, but the full size images look over compressed. I can't find a place to fool with image quality for these images. Any thoughts?
    Thanks in advance.
    -Buddy

    Buddy:
    I found that the full sized images that I synced to a web gallery in iPhoto were jpg compressed to a quality level of 9 out of 12 (as determined thru Photoshop). I do not notice any obvious degradation of image quality. At 200% enlargement I did notice some unsharpness. My files are compressed down from around 2 MB TO 840KB.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Cannot see adobe web gallery on active website

    I can see adobe web gallery in the dreamweaver test site and it is also visible and working on adobe bridge(where the gallery was created), however, when i upload it to my url it does not work. It tells me "http://designswithoutboundaries.com/Illustration%20Web%20Gallery/Illustrationwebgalleryind ex.html.
    "404 error Page not found. Page as been removed, name changed or temporarily unavaible. Please try the following: if you typed the page address in the address bar click the back button in your brouser to try another link use a searcdh engine like google to for information on the internet".  My path must be wrong but i don't know how to fix it. I have searched many pages on the web for help but I keep coming up empty. I, also, asked my hosting company, however, they told me they don't help with the design end and I should look for help from a design master. Any suggestion would be greatly appreciated.
    Thank You

    It tells me "http://designswithoutboundaries.com/Illustration%20Web%20Gallery/Illus trationwebgalleryindex.html.
    "404 error Page not found.
    The link above is invalid. It needs a forward slash just before index.html.
    Valid: http://designswithoutboundaries.com/Illustration%20Web%20Gallery/Illus trationwebgallery/index.html.
    but does it go anywhere?
    Break the link down into its component parts.
    The link points to
    Domain: designswithoutboundaries.com = CORRECT
    Folder: Illustration = CORRECT
    Folder: Illustration Web Gallery (%20 is a space). Is that correct?
    Folder: Illustrationwebgallery Is that correct?
    Page: index.html. Is that correct and does it exist on the server?

  • Numbers in web gallery and resource image folders do not match

    When I create a web gallery in Bridge, the numbers in the resource image folders, (Large, medium, thumbnail) do not match the name and numbers in the gallery and are completely out of order. The numbers are long and random.  My client is trying to email the small files and cannot locate them easily.
    I have never had this problem before....can you help?
    Thanks!!!

    Thanks Think, I've tried that. The strange thing is when I
    open the page in Contribute, it shows the original image. When I
    click Edit page, the image I want on the page is on the page. Not
    sure what I've done. Pages were originally created in Microsoft
    2007 and uploaded to the web. I am using Contribute to edit, it
    seemed like it would be much easier to edit pages.

  • Creating a Web Gallery through Bridge

    I am trying to create a web gallery using bridge.  The problem I am having is that the images are looking pixelated, not crisp and clear.  I have resized all the images to 900x1090, which I thought would be fine and look good on the screen, but they don't.  Does anyone have any ideas of how I can make these images look crisp and clear in the web gallery, or is this just something that happens when the images are organized into a web gallery? 
    Thanks in advance for any help anyone an offer.

    This question might be better asked in the Flash forum, as it's Flash that's doing the resizing of your images, and your browser that renders that poorly. You can always try an html gallery, which will look fine, albeit with reduced... flash. Probably staying away from IE will help as well.

  • Can't creat a Web Gallery

    I am running Bridge CS4 on windows Vista and when I click "Outpout to web or PDF" I do not get a templete like I used to, to create a web gallery. I did go to  Adobe Bridge Preferences , selected the Startup Scripts panel, and selected Adobe Output Module. I then restarted Bridge but still I do get the template. Sorry, can't do a screen shot since the drop down menu disappears whenever I click on the snipping tool.
    I used to be able to do this all the time and have no idea as to what has happened.
    Any help would be appreciated .
    Thanks,
    christian

    If it worked before and you have made no changes to software or hardware I would try resetting preferences.  Hold down the Ctrl key and start Bridge.  You should get a reset window with 3 options.

  • Creating a web gallery causing Bridge to Crash (over and over)

    Please Help. I'm creating a web gallery in Bridge CS4 (windows). The HTML Gallery.
    So I make my selections then click save,It starts to process than when it gets to Generate HTML,
    it just sits there for a long time than crashes. This is the 4th gallery I have done and for whatever reason it just wont process.
    Thank you for your help!
    CK

    Okay so I took the images back into photoshop to make sure the sizes were good. They are all 650x400 100dpi.
    This looks good to me, in addition I renamed the files. They were all named something like this Patty_Jane.jpg,
    I changed it to be pattyjane.jpg, So once again I tried to create the web gallery. NO DICE I looked through the
    crash log and your correct it might as well be in mandarin. I see nothing that gives me any clues.
    Any other suggestions?Thank you!
    CK

  • Can you create a web gallery from Stacks?

    Hi.
    I have several stacks totalling 108 images.
    How do I create a web gallery that shows the images, not the picks from Stacks? Is that even possible?
    Thanks,
    Scott

    I would keyword the stacks in question then build either an Album or a Project from the keyworded images, and a web gallery from that.
    -Allen Wicks

  • Photo/Edit-In CS6. psd image does not show in LR after save/close.

    Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

    This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
    If the behavior you describe follows a <save> in CS6 it is not normal.
    This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
    BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

Maybe you are looking for