After DB migration from PRD to DEV

Dear Expert:
I install R/3 4.7 x110 in windows NT 2003 64 bit with MSSQL 2005 server.
and I did DB Migration from PRD to this DB server.
But after that SAP can't start.
I followed the note 551915 download the STM program but sadly it can't start.
So I manualy run the sql script in the 551915 note.
after that it can logon but come out an error as below~
SAP System Check
Can't execute sap_check_if_sick
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
Runtime errors         START_CALL_SICK
       Occurred on     25.02.2008 at 10:04:37
Database inconsistency: Start Transaction SICK.
Error analysis
The error probably occurred when installing the
R/3 system.
Error message of the error that appeared first:
"Can't execute sap_check_if_sick".
Can any one tell me what should I do next?
Regards
Jack Lee

I got a solution to this problem.We got the same error when we changed database instance from default to named.
Login to SQL management studio.Go to security -> Logins -> sid ->Right click
Click - properties
Choose u2013 "Securables" and then click "search"
Choose  option u2013 The server ****
Look for permission u2013 'Control server' and grant it to SIDADM
Hope it helps.

Similar Messages

  • BI CLIENT REFRESH FROM PRD TO DEV

    DEAR GURUS,
    I want to do client copy from production to development of BI server. I want to carry out the infocubes, queries, etcc. from prd to dev.
    for the above activity which profile i want to select for client copy.
    After client copy shall i get all the infocubes,queries of prd server.
    Because for system copy i don't have that much space in dev server.
    please guide me
    regards
    santhosh

    Hi,
    Pls chk this:
    How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
    Strategies, Techniques, and Best Practices to Upgrade, Copy, and Migrate SAP BW Systems
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
    Note 184322 - Procedure after DB copy of BW source systems
    Note 886102 - System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    Note 771209 - NW04: System copy (supplementary note)
    Note 89188 - R/3 Source System Copy
    Regards
    CSM Reddy

  • Download and upload variants from PRD to DEV

    Hi,
    Unfortunately, most of the variants are being created directly in production system, but not in development. We would like to stop this process further more.
    In future, we would like to follow the process from DEV & transport to QAS and PRD.
    To match the variants of PRD and DEV, I would like to download the variants from PRD to DEV.
    How can I download the variants from one system and upload to the other system.
    Regards,
    Ravi

    Ravi,
    1. You can include the variants into a transport request in se38.
    SE38--> Variants --> Utilities --> Transport request
    2. When you create your program use can use TVARV table for variants, and parameters. You can maintain it with STVARV transaction also. So if you create your program using TVARV in your program, then you can include the changes of the variables into a transport request (there is an option to do it in transaction STVARV).
    If you use tvarv table, then you have to take care of when you saving a variant:
    http://help.sap.com/saphelp_nw04/helpdata/en/c0/9803aae58611d194cc00a0c94260a5/content.htm
    I think there is no other standard way to transport the variants from one system to another.

  • URGENT help needed:Address data missing after QA Refresh from PRD

    All,
    Address data for almost all user-ids are missing after QA Refresh from PRD.
    In QA, after importing the User-Master although its shows successful. The detailed log shows:
       Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
       Exit program AFTER_IMP_ADDRESS3 successfully executed
       SAP user has no address SAP*
       Error while deleting ADRVP for SAP*
       SAP user has no address SAPCPIC...
       ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
    We also do a Table export - import wherein the tables
    USR03
    USR07
    USR09
    USR20
    USR21
    USR30
    are included.
    The no. of entries exported and imported are same.
    Also FYI in the User-master Transport i can see the following Tables included in the object list
    USR01
    USR02
    USR04
    USR05
    USR06
    USR08
    USR14
    USR21S
    USR22
    USRACL
    USREXTID
    USREXTIDH
    Has anyone seen this before?
    Any body has any ideas?

    Hello Bidwan,
    I think it is an issue with company address. Just check if  company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
    If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
    Regards.
    Ruchit.

  • Shared folders not visible after the migration from 10.1.3.2.1 to 10.1.3.4

    Hi All,
    After the migration from 10.1.3.2.1 to 10.1.3.4., we are not able to view the shared folders after clicking on the answers link.
    Can you please let me know how can i resolve the same.
    Thanks in Advance
    Siva.

    Hi,
    Please check the catalog folder that user privilege and manage permission.
    Thanks
    Deva

  • Sharepoint 2013 discussion board item view (flat.aspx) throws js error after being migrated from moss 2007

    After preforming a migration from moss 2007 to 2013 on-prem we have noticed that html tags are showing up in the discussion board posts.  I have tracked the problem down to the flat.aspx page throwing a js error. 
    'SPAnimationUtility' is undefined - coming from the sp.ui.discussions.js file
    this is what I see on the page: 
    The reply and edit buttons function fine.  Its just that the html is exposed. 
    Anyone seen this before or have a clue as to how to solve?  
    Thanks,
    -Alex

    As I remember there are a couple managed properties (metadata) that are used by the views that don't get created when you migrate a discussion board from a previous version.  I don't remember the specific properties, but take a look at a new discussion
    board in 2013 and compare the properties in the views and you will find them.  
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Error after Oracle Migration from DMTS into LMTS

    Hello ,
    I'm sorry, I posted my question again from ABAP General into this forum ABAP Dictionary. I think that here someone can help me in order to proceed with my job in the Development and in production system.
    We are using SAP R/3 4.6C, with SAP kernel 2271, Oracle 9.2.0.5 and HP-UX 11.23
    I did the Oracle migration from dictionary into locally managed tablespaces on the QTS system (and before that the same migration on a separate system as a copy from production):
    1. export data and index tablespace with Oracle export command (exp: for PSAPCLUD and PSAPCLUI)
    2. import into file for creation of indexes
    3. Drop the data and corresponding index tablesspace with brtools - brspace
    4. recreate the tablespaces with sapdba or with sqlplus (using the ddl scripts created before dropping the tablespaces) - - I think is my problem
    5. import the data with Oracle import command
    6. import the indexes from the previously created sql file
    7. check optimizer statistics, analyze and next extents
    But there is one problem.
    Because I have also used the sapdba and ddl sql for recreating the tablespaces, I didn't specify the SAP data class for the newly created tablespace.
    And in the tables TAORA, IAORA and DDART (what is very unclear for me) 3 rows missing for the USER1, TEMP and ??? data class.
    If you try to import some transport in the corresponding tablespace which data class is missing an error ocur.
    I have read the Note 646681 - Reorganizing tables with BRSPACE, and I saw the part: If the <reorg_tsp> tablespace contains any of the following tables: SDBAH,SDBAD,DBAML,DBATL,MLICHECK,TGORA,IGORA,TSORA,TAORA, IAORA,SVERS,DD02L,DD09L,DDNTT,DDART,DARTT or SAPLIKEY (SAPLIKEY is only available in NetWeaver 2004s or higher), then you should move them to the tablespace <aux_tsp> by online reorganization using BRSPACE:
    brspace -f tbreorg -t <table_list> -n <aux_tsp>
    Do you have the same problem?
    Do you know how I can solve the problem now after the hole migration was done?
    How can I dedicate tablespace data class?
    Is it enought to just enter the same rows into the TAORA, IAORA and DDART?
    Thanks,
    Many regards,
    Ruzica

    Apparently you are trying to mix 32-bit code and 64-bit code. You must ensure that the 32-bit or 64-bit option is used consistently on every command, compiling and linking. The form of the option can depend on the version of the C compiler you are using, and whether you are on an x86 or sparc system. Consult the Pro*C and C compiler documentation.

  • To revert back a transport request from prd to dev server

    hi experts
        how to revert back a transport request from prd server to
        dev server?
        a transport request has been wrongly transported
        and it has make major changes in production server,
       now  we want to revert back that request , we know the   request no.
    regards
    pankaj

    All you have to do is create an order of transport type "Transport of copies" in PRO.
    I give you the steps to follow:
    1. Go to SE01 and create a new order (remember the type "Transport of copies").
    2. Enter the data of the order of transport that is going to come back.
    3. Enter the target, here is where you asign the target system to carry the request.
    4. Now just add the number of request to the new request you just created.
    5. Finally released the request from this transaction.
    6. Check on the queue of transport in DES, the request must appear there.
    I hope you serve =)

  • After file migration from PC to to Mac, where can I find my files on the Mac

    We recently purchased a MacBookPro and transferred the desktop and files including downloads from our Sony PC to the Mac.  The migration was successful, but we don't know where to look for the files on the Mac after the migration.  Please help.

    You should find a new account on the Mac. Logout of the current account and log into the new account.

  • How do you restore your playlists after a migration from my old pc?

    how do you restore your playlists after doing a migration from my old pc?

    Move iTunes following these instructions:
    iTunes: How to move your music to a new computer (Mac or Windows):
      http://support.apple.com/kb/HT4527

  • ZCC fails to login after server migration from 32 to 64 bit

    After I migrated my Primary server from 32 to 64 bit I can not login into ZCC. Page give me the following error:
    JDBC Driver class not found: Sybase.jdbc4.sqlanywhere.IDriver
    I migrated a Windows 2003 32 bit with Zenworks 11.2.4 to Windows 2008 R2 SP1 64 bit with Zenworks 11.2.4 in same zone. I would like to move to zenworks 11.3 but the documents show I need my Primary server to be 64 bit.
    My Primary server is my CA and has the embedded Sybase database.

    Originally Posted by nop1983
    Here you go...
    https://www.novell.com/documentation...a/bj3xt3x.html
    So you've only got one server?
    yes, I only had 1 server in the zone and needed to move from windows 2003 32bit to windows2008 r2 64 bit.

  • What components of VM are lost after its migration from one physical host to another?

    Hi, I found this post very helpful for me, it is very easy to understand about the live VM migration. I have a confusion regarding VM migration that if any
    VM is migrated from one physical host to another what components of VM (vCPU, vBIOS, vRAM, vHD, vNIC, OS, Apps) will be changed?
    Kindly help me to understand that:
    1.Will Operating System running on VM be changed? 2. Will BIOS and Boot Loader information be changed?
    Thanks Looking forward for your response.

    Just to make sure we're talking about the same thing. We're talking about "live-migration" not VM conversion from one hypervisor to another, like a VM from VMWare or XenServer to a VM on Hyper-V, right?
    As mentioned above, when a VM is
    live-migrated from one Hyper-V host to another, nothing changes. Bios does not change. A
    Gen1 VM with traditional BIOS firmware will not turn into a Gen2 machine with UEFI firmware for example. 
    Boot loader will not change when a VM is live-migrated from one Hyper-V host to another. 
    MAC address on VM NICs will change when a VM is live-migrated from one Hyper-V host to another, unless the VM NIC is configured with a static MAC address. A Changed MAC address will be interpreted by the VM as a new NIC, which will lose its old IP settings.
    Stopping and restarting a VM on the same Hyper-V host changes nothing about the VM synthetic hardware such as NICs, BIOS firmware, or its internal startup files like boot loader. 
    Stopping a VM, and restarting it on another Hyper-V host changes nothing except the VM NIC's MAC address if it is configured to have a dynamic MAC address as described above.
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

    Hi Gurus,
    I am facing an issue with web catalog migration.
    Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
    As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
    After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
    to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
    Because of this issue our release plans are getting postponed, please advise me.
    what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
    Thanks,
    Seshu

    try this:
    Archive all folders from 10.1.3.3 using catalog manager.
    Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
    If helps pls mark

  • Outlook Users connection issues after Mailbox Migration from 2007 to 2013

    Hi,
    We have a coexistance between Exchange 2007 SP3 and Exchange 2013 CU7. There is an issue when after migrating the user from exchange 2007 mailbox to exchange 2013, the outlook keeps on prompting for password when it is being launched. Checking the Connection
    Status we found that there is a connection to the old 2007 Server and the type is Exchange Public Folder. I have migrated the public folder and checked the Mailbox of the user and found that the DefaultPublicFolderMailbox is set to the 2013 Public Folder Mailbox.
    If I check my 2013 MailboxDatabase Properties, It sill shows that PublicFolderDatabase Properties is still pointing to the 2007 Public Folder Database. Any resolution on this?
    Another issue is, We set outlook anywhere on the 2013 to use basic authentication, however, when users are migrated to 2013 the Outlook client changes to NTLM. even if we set the outlook to basic to make it work, it still comes back to NTLM after a while.
    I did most of the resolutions online to use powershell to make changes to outlook anywhere but no luck. any suggestions is highly appreciated.
    Thanks & Regards,
    Arthur

    Hi,
    For the first problem, please check the msExchHomePublicMDB attribute for mailbox database in Exchange 2013, you can check this attribute in ADSIEdit.
    If this attribute is pointing to Exchange 2007 public folder database, please set to blank. After that, please restart the information service.
    And for the second question, I suggest we open a new case for this issue. In order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one
    issue per thread in order to find a resolution efficiently.
    Thanks for your understanding.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • TS1963 Issues after file migration from PC

    Hi, I'm new to Mac and I've just done a file migration of my photo's from my old PC (using migration assistant after I've been using the mac i.e. not at initial start-up) and I now can't find the files. Looking at previous similar issues on forums people seem to suggest that a new account will be set up and the photo's will be in there, however there is no new account when I look for it.
    Can anyone help to steer me in the right direction?

    Welcome to the Apple Support Communities
    Migration Assistant creates a new user. Open Apple menu > Log Out to go to the login screen, and you must see the user

Maybe you are looking for