After Effects: ungültige ID für Speicherverfolgung

Liebe Community
Diese Fehlermeldung:After Effects: ungültige ID für Speicherverfolgung macht es mir unmöglich mein Projekt zu speichern.
Auch nicht bei dem Versuch mit einem anderen Ort oder Namen.
Danach erscheint dann noch dieses Fenster:
After Effects: AEGP Plug in Windows Media Import After Effects error 0x2 (5027§12)
Mir ist das mittlerweile öfters passiert ,und ich glaube mich zu erinnern das es immer bei Projekten war , die ich aus Premiere importiert habe.
Für alle Tips bin ich herzlich dankbar, arbeite übrigens mit 6.5 Pro.
Grüße
Peter

Ich kriege nicht raus, warum genau in obiger Tabelle für AE 4 GB max. zulässiger Speicher angegeben sind.
Warum? Nach Adam Riese sind 1+1+1+1,77+4,23 immer noch 8 (GB). Die anderen Prozesse laufen ja nicht mit dünner Luft oder obskuren Quantenbits in Fluxkompensatoren und dein Betriebssystem muss ja auch noch irgendwo hin...
Es ist egal, ob ich Mehrprozessorverarbeitung aktiviere oder nicht, die Performance bei der RAM-Vorschau bleibt die gleiche. Sollte es nicht auch hier Auswirkungen haben? Das Rendern der Ausgabe mit Mehrprozessorverarbeitung habe ich noch nicht getestet.
Du hast einen temporalen oder hardwareabhängigen Effekt/ Feature und AE nuckelt auf einem Kern rum. Uraltes Problem. Könnte schon allein ein spezieller CoDec im Quellmaterial bewirken... Davon abgesehen wirst dud da selten was sehen - oft dauert es länger, die Hintergrundprozesse zu synchronisieren und temporäre Daten zu kopieren, als alles zu berechnen.
Während des Renders wird in der Renderliste unten eine RAM-Auslastung von nur 40 % angezeigt.
Siehe vorheriges. Wo nix ist, kommt nix hin.
Mylenium

Similar Messages

  • Rendercrash - "ungültiger bildpuffer"

    Hi everyone,
    not sure this is the right location of this post here but I´m kinda stuck..so any help appreciated! Also, I´m running on german, so I´ll translate as approximately as possible..
    i´m rendering a large comp. HD 1920 x 1080. Square Px. 25 fps. Duration 6 min.
    All vectoranimation. Lots of separate layers, nested subcomps, all vector. Lots of xpressions, quite the bit of keyframes, effects, whatnot. But not toooooo loaded.
    (Had "worse" projects.) Tried to keep it slender as possible.
    When finally rendering, my render always crashes in the last third of the animation, always between the 0:03:20:00 and 0:03:55:00 mark.
    Error message reads (in german):
    "After Effects Fehler: Ungültige Bildpuffergrösse (35975 x 20264). (37 § 102)"
    (approx. translation: "After Effects Error: Invalid Buffersize (35975 x 20264). (37 § 102)"
    My soft- and hardware specs are:
    Version of AE: CS6 Version 11.0.0.378
    Operating System: Mac / OS X 10.8.4
    All updates installed.
    2.7 GHz Intel Core i5
    RAM: 8 GB
    1600 MHz DDR 3
    Nvidia Geforce 6T 640M 512 MB
    1 TB SATA plus one external drive
    Current Quicktime installed: 10.2
    No third party HW.
    Multiple Frames Multiprocessing on or off makes no difference. same crash.
    Other Apps RAM set to: 2 GB.
    What I´ve tried so far: as the render seems to always crash around the same mark, I tried breaking the Comp down to segments: no avail.
    I´ve tried re-saving the whole project to a different path/location: no avail.
    I´ve tried to inspect the contained vectoranimations for error sources, trying to further decrease complexity: no avail.
    Lastly I´ve tried rendering on two other computers (approx. same specs, apart from 16 GB RAM): no avail.
    Always the same error.
    So. I´m stuck. Any ideas? Workarounds? I need this thingy baaadly to render soon..
    Any ideas would be immensly appreciated! Cheers Community!
    Regards, Dondonna//

    http://myleniumerrors.com/?s=37+%3A%3A+102
    Und für den Rest: Screenshots, genaue Footageverwendung, Effekte und ihre Einstellungen usw. Außerdem mal beim Render "Extra per Frame Info" für das Renderlog einstellen und auch ein genaues Crashlog liefern:
    Working with your Operating System’s Tools
    Mylenium

  • After Effects Fehlermeldung

    Tach Zusammen
    ,folgendes ärgerliches Problem habe ich.
    Ein in 6.0 erstelltes PPj kann ich in 6.5 öffnen und bearbeiten, beim speichern gibts es allerdings 2 Fehlermeldungen:
    After Effects Fehler: ungültige ID für Speicherplatzverfolgung (23§35)
    einen anderen Speicherplatz habe ich bereits probiert
    danach kommt dann noch:
    After Effects:AEGD Plug in Windowsmedia import: After effects error: 0x2
    Wer weiss rat?
    Besten Dank,
    Peter

    http://myleniumerrors.com/2010/07/26/3-3/
    Mylenium

  • Error while reading: 'ungültiges Anmerkungsobjekt' (invalid annotation(al object))

    Dear users,
    I am currently reading and taking notes (highlighting and commentary) on a pdf document.
    Since last week, whenever I open it and reach the page where I stopped reading I get an error:
    'ungültiges Anmerkungsobjekt' (=invalid annotation(al object)). When I click on ok it reappears several times.
    As soon as I scroll it starts over. Other pdf documents works properly.
    What can I do?
    Thanks a lot
    Cristy

    On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
    - first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
    (for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
    - then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
    davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
    Here is a technique for identifying all the pages that have invalid annotation objects on them:
    1. Document > Extract Pages ...
    •Select the checkbox for "Extract Pages As Separate Files"
    •Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
    •Click OK.
    2. During the extraction, click OK in all the message boxes that appear.
    3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
    From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
    - after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
    - I then combined the 95 good extracted pages into a new file name .pdf
    - then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
    - delete the bad file.
    Hope this helps someone.

  • Photoshop Elements 12 ungültige Seriennummer

    Ich habe gerade Photoshop Elements 12 upgrade über das Internet gekauft. Darauf hin habe ich eine Seriennummer und einen downloadlink bekommen. Nach dem download und installieren der pkg datei wurde ich nach der Seriennummer gefragt die ich eingeben habe. Darauf hin kommt folgender Text: "Die eingegebene Seriennummer ist ungültig"
    Ich verwende einen Imac mit 10.8.5 auf dem Photoshop Elements 10 Editor installiert ist.
    So macht neue Software keinen Spaß! Bitte um Hilfe!

    Google Translated text:
    Wir haben daran gearbeitet und es sollte nun behoben sein.
    Die Hoffnung, an dieser Stelle ist, dass die Seriennummern alreay haben wird, nachdem wir einige Dinge geändert auf unserer Seite, und die Änderungen wurden mit den Servern propagiert.
    Dies war möglicherweise von mittags PST fixiert werden heute, aber wir haben bereits Berichte von Anwendern mit Erfolg mit ihren Seriennummern jetzt.
    Ich würde empfehlen, versuchen, Hilfe> Anmelden und sehen, ob die Seriennummer für euch akzeptiert wird.
    Lassen Sie mich wissen, wie es geht,
    Grüße
    Pete
    English: We've been working on this and it should be resolved by now.
    The hope at this point is that the serial numbers you ALREAY have will work after we changed some things on our end, and the changes were propogated to the servers.
    This was potentially to be fixed by noon PST today, but we already have reports of users having success with their serial numbers now.
    I'd recommend trying to Help > Sign In and see if the serial number is accepted for you guys.
    Let me know how it goes,
    Regards
    Pete

  • I am trying to install after effects, but no matter what version I try to download, there is always a different error not allowing me to open or use the program after I have already installed it.

    I have recently repurposed an iMac from late 2009 as an editing machine, and have been trying to install preferably After Effects CS6.  When I install and try to open it for the first time, the program quits unexpectedly and continues to do the same every time I try to reopen the program.  After no luck experimenting trying to fix the problem, I attempted to download the trial of After Effects CC 2014 to see if the problem was with the computer or with the application.  After installing CC, there was another error when I attempted to open it.  My final attempt was taking After Effects CS5 from an old hard-drive and attempting to open it on the iMac.  When I open CS5 I am greeted with another error message telling me to reinstall After Effects.  After reinstalling I get the same message. 
    I am confused to whether my computer can handle After Effects, or there is another error occurring.
    Any help would be appreciated.
    Thanks
    -Eli
    (Mac OSX 10.10
    3.06 GHz Intel Core 2 Duo,
    4 GB 1067 MHz DDR3
    NVIDIA GeForce 9400 256 MB)

    I don't know if these are important or not, but I thought I would include them anyways.
    Thanks again
    Eli

  • After Effects CS5.5 Wont Open - Application Just Bounces In The Dock.

    Hi all,
    I appear to have encountered a problem with After Effects... I was working on a project earlier today which usalizes a VideoCopilot plug-in called Element 3D. After a quick break I came back to the project and attempted to load in the 'Free Earth Project' by VideoCopilot. (http://www.videocopilot.net/blog/2012/08/free-earth-project-for-element-3d/). As their site suggests, I had to place a downloaded project folder called 'Earth' into Element 3D's 'My_Models' folder. Immediately after this I tried loading After Effects and encountered the issue. I'm not sure if it's couincidence or directly related which is why I am posting here.
    After Effects does nothing but bounce in the Dock. When I right-click the application I'm met with a 'Force Quit' option, and a message saying "Application not responding". I'm on OS X 10.7.4. I'm not able to tell you what version of AE I'm running, only that it's CS5.5, as I cannot lanch it to find out. All other Adobe products work with no problem.
    I have already contacted the support team at VideoCopilot and they have sent me an updated build of Element 3D in an attempt to resolve the issue, unfortunately though this did not work. Addiitonally, I have tried booting into Safe-Mode and tried to launch the application from there, as well as using Disk-Utility to 'Repair Permissions'. All of these steps have failed to get AE working again.
    If anyone knows of a way to fix this I would be most grateful. I'm working to a very tight deadline and am afraid that I will miss it. Additionally, if anyone has any fixes that doesn't require reinstalling applications that'll be a bonus!
    I've also attached a crash-report to this post incase it's of any use in determining the cause of the problem (I couldn't find a way to attach it directly, so the file is hosted on my website - I apologise in advance if this is against forum rules!) -  http://www.starfireindustries.org.uk/uploads/8/6/6/1/8661295/ae_error_report.rtf
    Thanks in advance,
    John.

    Something similar here:
    https://discussions.apple.com/thread/3826648?tstart=0

  • CS5 or CS5.5 Adobe After Effects

    I have a Mac OS X version 10.5.8 and was wondering if CS5 or CS5.5 Adobe After Effects was available still?

    No. You can only buy current versions. If your machine allows, it would be easier to just upgrade OSX, otehrwise you'll have to find a legit used copy of these older versions, which might prove quite difficult...
    Mylenium

  • Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

    My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
    Any help will be appreciated!
    k.regards
    Ramon

    Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
    Is there at least a work around, until this big fix comes along?
    k.regards
    Ramon

  • Media Encoder CC not using GPU acceleration for After Effects CC raytrace comp

    I created a simple scene in After Effects that's using the raytracer engine... I also have GPU enabled in the raytracer settings for After Effects.
    When I render the scene in After Effects using the built-in Render Queue, it only takes 10 minutes to render the scene.
    But when I export the scene to Adobe Media Encoder, it indicates it will take 13 hours to render the same scene.
    So clearly After Effects is using GPU accelleration but for some reason Media Encoder is not.
    I should also point out that my GeForce GTX 660 Ti card isn't officially supported and I had to manually add it into the list of supported cards in:
    C:\Program Files\Adobe\Adobe After Effects CC\Support Files\raytracer_supported_cards.txt
    C:\Program Files\Adobe\Adobe Media Encoder CC\cuda_supported_cards.txt
    While it's not officially supported, it's weird that After Effects has no problem with it yet Adobe Media Encoder does...
    I also updated After Effects to 12.1 and AME to 7.1 as well as set AME settings to use CUDA but it didn't make a difference.
    Any ideas?

    That is normal behavior.
    The "headless" version of After Effects that is called to render frames for Adobe Media Encoder (or for Premiere Pro) using Dynamic Link does not use the GPU for acceleration of the ray-traced 3D renderer.
    If you are rendering heavy compositions that require GPU processing and/or the Render Multiple Frames Simultaneously multiprocessing, then the recommended workflow is to render and export a losslessly encoded master file from After Effects and have Adobe Media Encoder pick that up from a watch folder to encode into your various delivery formats.

  • Adobe Bridge CC not playing After Effects CC animations

    Hello,
    I am fairly new to After Effects and Adobe Bridge, and I recently ran into a problem.
    So, when I turn on After Effects , and in the Effects Panel , I click "Browse Presets", and then It opens Adobe Bridge. But when I single-click in any kind of an animation in Bridge, it's not playing it in the "Preview" panel.
    The little Windows's "picture icon" just starts zoomed in, and then it quickly zooms out.
    I'm using a freshly installed Windows 8.1 , and fully updated Bridge and After Effects.
    What might be the problem?
    If you want, I could also record the problem with a screen recorder and upload it to YouTube.
    EDIT : I just fixed the problem by updating Bridge to the latest version (CC 6.1)!
               The animations are playing smoothly without any problems! Just run the Adobe Update Manager, and update
               Bridge!
    Edited by Michael Jackson, 1999.

    Hi,
    Please refer to the help document below:
    CC applications close immediately after launch
    Regards,
    Sheena

  • I am new to After Effects and Motion 5 and I have a question

    Hello there,
    I am currently working on a personal side project for a family member. She would like me to make a video with recorded audio and pictures from the 1920’s for my grandmother. I would like to give the parallax and 2.5D effect a try but as I never used After Effects or Motion before I am a little overwhelmed.
    I have about 80 images to animate. Right now I am in the ‘Photoshop phase’. I am going through each image and separating the foreground, mid-ground, and background, into separate layers and saving the .psd files to eventually bring into Motion 5 (or After Effects) and animate.
    After seeing this video:
    https://www.youtube.com/watch?v=ZVrYyX3bHI8
    I really wanted to animate the images I had in a similar fashion. I really loved how they seemed to move and know that I can accomplish this appearance with the pin tool in After Effects. After seeing this video however, I continued looking into the 2.5d effect and found this movie for Motion 5:
    https://www.youtube.com/watch?v=gmxlm2nkVLA
    I bought Motion 5 because I thought the interface seemed more user friendly to newcomers (like myself), the effects were similar, and because I couldn’t afford to pay for After Effects every month.
    But now I am kicking myself. Motion 5 is lovely and I do like the camera effects but I don’t think I can accomplish the ‘puppet’ effect with it like I can in After Effects. Does anyone know if it is possible? Is there a plugin for Motion 5? Can I send my .psd files into Motion 5, set up the timeline and cameras, save it, and then move it into After Effects and then use the pin tool to manipulate the images and layers?
    I have read that some say it is hard to move Motion files into After Effects? If this is the case, could I save the Motion file, open it in Adobe Premiere, and THEN open it in After Effects and play around with it?
    Any help is appreciated. Thank you so much in advanced.

    2.5D is fairly easy to do in Motion... that's the good news. The bad news is: if you don't know what you need to do to accomplish it, it's practically impossible to do easily or well.
    The first problem to overcome is perspective, and the other problem is parallax.
    These two tutorials (by Mark Spencer) will give you all the information you need dealing with moving Photoshop Layers in Z-space. Even though the point of the tutorials is a "fly through", the same information applies to creating 2.5D. Just animate the camera laterally (sweep) instead of dolly.
    http://vimeo.com/1344282
    http://vimeo.com/1695145  (updated tips)

  • Bridge CC no compatible with the new After Effects CC 2014 ?

    Hi, I'm updating the Adobe suite (CC 2014) .but After Effects CC 2014 no longer works with the old Bridge CC (there is no update of Bridge). Since "browse presets" in After Effects when choosing a preset (dissolves etc) there is an error message:
    "After Effects error: can not import file" Entries lum.-marq.calque.ffx "unsupportedfiletype or extension (0 :: 1). With all presets.
    I tried on other computers with other adobe updated it makes such licenses except with the old version of adobe after effects (after CC effects) I tried too to change language of Bridge and After effects (beharps this is a langage compatibility problem) but the problem is the same.
    So I think the new version after effects CC 2014 is not compatible with the presets adobe bridge CC ??
    How can I do? I have to go through the old version of after to apply a preset Bridge? I can not even download it in cloud creativ ... there is only the new version of after effects...

    You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Also, this is an OPEN forum, not Adobe support... please do not post personal information

  • New PC, downloaded CC 2014. Flash not showing up as option to rip in Adobe Media Encoder or in After Effects. Help?

    Why is .flv not an option in Adobe Media Encoder or Adobe After Effects?
    Also, when Adobe Captivate converts the video it looses the Alpha channel.
    Help

    Thanks for taking the time to answer this question. Knowing this isn't possible at least narrows my options down. It would be helpful to provide some kind of list of what comp settings carry over into AME from After Effects. Is it essentially everything that is enabled in the Timeline? (I know that motion blur settings do.)
    I'll put this in a feature request, but yes, we need the other half of After Effects Render Queue in AME in order for AME to be a good replacement for rendering from AE. I'll give you my thoughts on why Render Settings are essential before you would actually want to render with AME instead of doing so because you have to (either because you want to render in the background, or need a codec that has been removed from AE.)
    1. Speed: Simply applying a Render Settings preset is much faster than manually setting motion blur, frame blending, work area, etc.
    2. Reliability: Not being able to apply a Render Settings preset at the time of render is a recipe for missing a crucial setting buried in a comp, then having to redo a render and wasting time.
    3. Features: As noted above, there is no way to approximate Render Queue's ability to change resolutions at render, which results in a lot of wasted time when that feature is needed.
    Render Settings I think are crucial to making AME rendering worthwhile for AE users:
    1. Rendering resolution
    2. Work Area/Entire Composition toggle
    3. Field Rendering (wait, does this mean AME can't currently render to fields?)
    4. And PRESET ability these settings, so I'm not doing them manually every time.
    I realize that your team clearly doesn't spend the same amount of time I do making low res H264 previews and sending final files out in H264 format, so you don't appreciate the impact of the changes you made. Moving to AME for that stuff is a real inconvenience, but implementing the settings above could help soften the blow.
    Thanks,
    Jerry

  • Adobe Media Encoder renders in Lossless, such as After Effects?

    Adobe Media Encoder renders Lossless like After Effects too?

    There are multiple codecs that can losslessly encode video. One example is the PNG video codec in a QuickTime container. Another example (which matches the After Effects output module named Lossless) is the Animation video codec in a QuickTime container.

Maybe you are looking for