After form loads assigned values to textbox

Hi experts,
I am developing through SAP B1 studio for Microsoft visual studio.  Usually, in the menu event/form load, we show the docnum,docdate fields values.Trying to assign values to textbox after form opens.So, in Form_LoadAfter, I am trying.But, this event calls even before form is shown. i.e,it is called immediately after clicking Menu to open the form.So, assigning values to textbox is showing error.Any inputs regarding this will be helpful...
Thanks in Advance,
Parvatha Solai.N

Hi Parvatha,
For User Form, when the Form Load event is triggered, the form does not contains anything yet,
Thus you cannot put a default value in this event.
Instead, in B1Studio, each form is a class.
In the default class constructor, there is a code where the form and the items are drawn.
After this block of code, you can place your default value here.
If you are not sure, just place it just before the closing of this constructor.
Regards
Edy

Similar Messages

  • Infopath Form Load setting values showing blank

    i am using infopath form and filter the employee basic details from a list and setting the infopath column with these values
    for some of the employees these values are showing blank is it due to some browser compatabilty how can we debug the infopath form load where we are setting some fields
    Regards
    MCTS,ITIL

    If all are having same permission then it's surely compatibility issue. Have you tried to run in browser in compatible mode for those users who are facing this issue? Also check if what version of browser they have (32 bit or 64 bit).
    Also verify that webclient service is started in their machine. go to services.msc and start this service.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How to assign values to textbox automatically when cursor position changed

    I want to get values based on the values entered in the one textbox when we change the cursor position the value to be automatically loaded in to other text box is it possible please help me .....

    You still haven't explained what a text box is.
    Repeating what you've already said in "BOLD" text doesn't make the question any clearer.
    What does the changing cursor position have to do with anything. I can use the arrow keys to move the cursor without changing the text.

  • How "Assigned" value calculated for WBS in CJ30?

    Dear all,
    I have got a problem with the Assigned value in CJ30. The problem is that the value in column "Assigned" of CJ30 disappeared after I settled the cost of the WBS to another WBS which has no budget control activated (no budget profile assigned). As I know, the Assigned value won't be changed if the WBS is settled to an object with no budget control, for example settle the WBS to a cost center, or a assets. In my case, although the settlment was done between two WBS, but I had removed the budget profile when created the receiver project, which means the receiver WBS has no budget control activated. However, after settlement, the assigned value of the sender WBS disappeared. But if I settle the cost to a cost center or assets, I can see the assigned value still shown on the sender WBS in CJ30.
    Can anybody here tell me why this happen? or is this a bug of SAP?
    Thank you very much in advance.
    Best regards,
    Brook

    I can reproduce your issue.  If you toggle open Audience P I think you will find the very last value for the last Category and the last Product_Group will be around 15% for Growth 2014 and around 23% for Growth 2015.  The chart series expression
    is choosing the last value for ReportItems!YoYGrowthPercentage as it doesn't know how to attribute that ReportItem to the Audience matrix.  If you want a chart to display only the percentage for Audience, I suggest that you have a separate data
    source with the values for GrowthPercentage for only the Audiences, and make that the data source for your chart. Also, I would make the growth figures in your matrix also a matrix by doing the percentage calculation directly in the table. You would pull in
    the value for this year and the value for last year into your data set, and then do the calculation within the report as follows:
    =SUM(Fields!Value.Value)/Sum(Fields!LastYearValue.Value)-1
    Create a second Column Group adjacent after, also by year.  Your query could look something like this, depending on how your tables are structured:
    SELECT a.Audience, a.Category, a.ProductGroup, a.Year, a.Value, b.Year as LastYear, ISNULL(b.Value,0) as LastYearValue
    FROM YoYGrowth a LEFT OUTER JOIN
    YoYGrowth b ON a.Audience = b.Audience and a.Category= b.Category and a.ProductGroup = b.ProductGroup
    AND a.Year-1 = b.Year
    Hope it helps.  Cheers,
    Martina White

  • Multiselect values in "current values" on form load

    Hi,
    I have a multi select field for 30 roles in the form. Now, i want 28 roles to appear on the right hand side (current Roles) on form load and the rest 2 to appear under available Roles.
    How can i do this? Please let me know.
    Thanks,

    Here u go..
    <Field name=':variables.currentroles'>
    <Display class='MultiSelect'>
    <Property name='title' value='Roles'/>
    <Property name='selectedTitle' value='Selected roles'/>
    <Property name='availableTitle' value='Available roles'/>
    <Property name='allowedValues'>
    <ref>:variables.unassignedroles</ref>
    </Property>
    <Property name='allowOthers'>
    <Boolean>true</Boolean>
    </Property>
    </Display>
    </Field>

  • Very slow performance when assigning value to a form item

    Dear all,
    I have an add-on form that contains 30 text edits. I did not creat the from with screen painter but positioned them by marking each item's top and left position in the new sub.
    I have named them as 'edBox1', 'edBox2'......, 'edBox30'
    At a point I need to assign value to each edit text, I have queried the content from DB into one recordset. However, when I start to assign values to each edit text, the performance became very slow.
    my code is as follow
    me.form.items.item("edBox1").Specific.String = recordset.field.item(0).value.tostring
    me.form.items.item("edBox30").Specific.String = recordset.field.item(29).value.tostring
    I found that B1 seem to iterate each item on the form in order to find the item I specified.
    so I think I should specificy items earler.
    Now for each item I dim an object for it at new sub
    Dim oedBox1 As SAPbouiCOM.EditText
    Dim oedBox30 As SAPbouiCOM.EditText
    and while creating forms, I specificy each item to the matched object
    Then I assign values to items by
    oedBox1.String = recRetrive.Fields.Item(0).Value.ToString
    oedBox30.String = recRetrive.Fields.Item(29).Value.ToString
    However, B1 still iterates to find the item and the performance is still slow, does anyone has a better solution to this issue? please kindly advise.
    Thank you
    Alan
    Edited by: Chih-Peng Chen on Dec 17, 2007 8:42 AM

    Hi Chen,
    you can find one example under SDK samples which will guide on using datasources
    Bind the controls to dbdataource and then query the datasource.
    then update form using oForm.Update(),this will automatically fill the values in all edit boxes and it will be very fast as well
    Hope it helps you
    Regards
    Vishnu

  • In forms 4.5 when query record assigning value is possible?How?

    Hi all,
    when query record ,depending on condition i can assign value.
    I done but it give error first delete or create record error?
    How can i overcome this problem.
    Thanks
    venkata.

    IF v_value = 'Y'
    THEN
    lvl$std.copy_number(0,'BLK1.V_ITEM_NAME1');
    ND IF;
    I written in post-query.What does
    lvl$std.copy_number(0,'BLK1.V_ITEM_NAME1');do that
    :blk1.v_item_name1 := 0;doesn't?

  • How to assign values to Dynamic VO.

    Hi All,
    I have created a Dynamic VO and i have created 2 attributes(name and age) for it.
    Can i create this dynamic VO in Process form request of one of the CO class?
    Please let me know how to assign values to it......and display it and the page.?
    Thanks,
    Sowmya.

    Mukul
    I am trying to achieve something like below:
    Creating a Dynamic VO in my extended controller's ProcessRequest() method and attaching it to a MessageChoiceBean. In ProcessFormRequest() method based on some condition i have to change my Dynaic VO's whereClauseParam and re-execute it so that it will show some different set of values. Below is the code which i used. But after re-executing it my LOV is still showing old set of values. I have posted a query regd. the same but dint get much help. Kindly let me know, if you have any comments. Also Please find the link to my earlier post.
    Link: Re: Re-executed dynamic VO not showing new values
    * CODE *
    ProcessRequest()
    ViewObject vo = (ViewObject)am.createViewObjectFromQueryStmt("dummyVO","SELECT MEANING AS VALUE FROM HR_LOOKUPS WHERE LOOKUP_TYPE = :1");
    vo.setMaxFetchSize(-1);
    vo.setWhereClauseParam(0,"input1");
    vo.executeQuery();
    OAMessageChoiceBean mesBean=(OAMessageChoiceBean)webBean.findIndexedChild(webBean,"DemoChoiceItem");
    mesBean.setPickListCacheEnabled(false);
    mesBean.setPickListViewObjectDefinitionName("dummyVO ");
    mesBean.setPickListViewUsageName("dummyVO ");
    mesBean.setListDisplayAttribute("VALUE");
    mesBean.setListValueAttribute("VALUE");
    ProcessFormRequest()
    If the event is fired
    S.O.P(....);
    ViewObject vo1 = (ViewObject)am.findViewObject("dummyVO");
    vo1.clearCache();
    vo1.reset();
    vo1.setWhereClause(null);
    vo1.setWhereClauseParams(null);
    vo1.setWhereClauseParam(0,"input2");
    vo1.executeQuery();
    S.O.P(....);
    Thanks

  • No Adobe Form Is Assigned to the Scenario:  - PCR

    Hi,
    In my project, configured 5 Custom PCRs as copy of standard PCR and enhace it. When Full authorization USer ids, am able to execute the all PCR-Adobe form and complete the process.
    When i logo to portal with Z role authorization (with respect to Client), am bale to execute only 3 PCR and remaining 2 PCS display the following error message.
    Critical Error
    A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.
    Contact your system administrator.
    No Adobe Form Is Assigned to the Scenario   
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1981)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1043)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:460)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:799)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:381)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
         at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
         at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
         at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:216 
    Provide your inputs pls

    Hey Hi,
    IF you are familiar with authorizations in PFCG trabsaction you are finaliar with S_DEVELOP if not ask the authorization team on your project.
    Basically this authorization object handles the read/write etc authorization related to devlopment objects. If you implement Adobe forms you will probably develop your own forms or at least copy the SAP forms to customer namespace.
    For Adobe you will therefore have 2 custom development objects (1 for the form and 1 for the interface that is automatically generated). The end-user shoulf have at least READ access to these objects. If not the portal will trow an error on this.
    To determine the tech names of the objects find the form and related interface in transaction SFP. These should be inserted in the object S_DEVELOP in the role for the end users.
    You may want to consider to put the value Z* in the object which will give authorization for all the custom developed objects.
    If you can't find the object reply again and i will send a screenshot.
    Finally, make use of the splended transaction ST01!! It will make your life a lot more easy in portal! It traces all the authorizations needed and missing for any user you specify. After activating the trace and running a portal scenario the log will tell you want went OK and what not on an authorization object level.

  • Oracle Forms : Accesing previous value of a field

    I am designing a form which is master detail in the way it looks. Both the blocks are non-database blocks. On the header part there are 2 fields and a button. Based on the values enterd in these fields, when the button is pressed, it populates the fields in the detail block below which is a multiple item block. Now what ever value is displayed in the detail block is editable. What i want is that what ever value is edited by the user should not be more than the initial number value populated initially in that field. Basically what i want is how do i access that previous value in that field which was there before the user edited that field, so that i can put validation checks with that field.
    It would be great if any of u can pls help me. Please reach back in case of any clarifications......... waiting for a reply soo........

    hello
    either you assign the old/original value to a global variable or hidden item or parameter then refer it to the new item value;
    after or on populating value :
    global.variable := item_value;
    validation :
    if item_value (EDITTABLE FILED) != global.variable (OLD VALUE) then
    end if;
    charles

  • Can we assign value to a variable in PL/SQL Loop

    Hi
    Can we assign value to a variable in PL/SQL Loops?
    DECLARE
    V_Num NUMBER;
    BEGIN
    LOOP
    V_Num := 10;
    DBMS_OUTPUT.put_line(V_num);
    V_Num := V_Num - 1;
    EXIT WHEN V_Num = 0;
    END LOOP;
    END;
    In the above program, Can we assign V_num with a value 10????????
    Thanks & Regards,
    Hari Babu
    Edited by: 1004977 on Jun 5, 2013 2:40 AM

    Hi,
    1004977 wrote:
    Hi
    Can we assign value to a variable in PL/SQL Loops?
    DECLARE
    V_Num NUMBER;
    BEGIN
    LOOP
    V_Num := 10;
    DBMS_OUTPUT.put_line(V_num);
    V_Num := V_Num - 1;
    EXIT WHEN V_Num = 0;
    END LOOP;
    END;
    In the above program, Can we assign V_num with a value 10????????Yes; the example you posted does that.
    When the loop starts, the value 10 is assigned to v_num. You should see that value displayed by the put_line statement.
    After that, v_num is set to 10 - 1 = 9.
    Next, the EXIT condition is evaluated. At this point, v_num is 9, not 0, so the loop runs again. V_num is set to 10 again, and the loop continues forever (or, in some versions, until the dbms_output buffer is filled and an error occurs.)

  • Assigning value to an item

    Is there a way to assign value to variable
    of data type ITEM? In other words, I need to
    assign value to an item, where I just know the
    it_id.
    In the following procedure p_item is unknown until runtime;
    and if it_id is not null then assign some value to the item.
    procedure update_item(p_item)
    is
    it_id item := find_item('block1.'||p_item);
    if not id_null(it_id) then
       it_id := 'some_value';  --doesn't work.
    end if;
    end;

    Do you mean you know the name of the item and you want to then assign a value?
    If so then use the COPY command which allows you to assign a value to a named variable
    e.g.
    COPY (12345, 'blocka.number_item1');
    To read the value in the same way use the NAME_IN function.
    There is plenty in the forms helps about this.
    Mark

  • Assigning value to an input account

    Hi,
    We have an input account in our Account dimension. In the rule file (maybe in the consolidation routine) can we write a code which assigns a value to an input account. The assigned value maybe another account value or a static value based on a logic.
    Thanks

    If by "input account" you mean a leaf-level account that has no children, the answer is "yes", but with a qualification. In normal circumstances, for the rule to post the value to the account it needs to have the "IsCalculated" parameter set to "Y". This means the account can no longer have data posted to it via FDM, grids or forms.
    The other possibility is the use of allocation functions &/or routines but this is an area I have not explored personally in HFM.

  • Assigning Value To An Application Item via JS

    Hi guys,
    I am trying to assign a value to an application item by using javascript. But I can't do this when I try to display with alert the result is empty. Do you have any idea how can I assign value to an application item by using javascript?
    else if(action=="ASSIGN")
    var moname = $(el).children("td[headers='SOURCE']").text();
    $s('F10_SELECTED_OBJ',moname);
    alert($v('F10_SELECTED_OBJ'));
    Thanks

    Hi
    >
    I am trying to assign a value to an application item by using javascript. But I can't do this when I try to display with alert the result is empty. Do you have any idea how can I assign value to an application item by using javascript?
    >
    Scope of JavaScript is the HTML DOM in the browser. The Application Items do not exist in the HTML DOM, only in the session state.
    This explains what you observer. To set the App Items using JS you have to use an AJAX call to an OnDemand Application Process that sets the Application Item using PL/SQL. Or, call a procedure over http and set the App Item in that procedure after setting the Workspace / Security Group Id.
    Regards,

  • Assigning values to 2 fields using sql statement

    db11g , apex 4.0 and firefox 24 ,
    hi all ,
    i am trying to follow this tutorial to assign values to 2 items on a page using sql statement ,
    and i am using the same sql statement the tutorial uses
    select d.loc location, count(e.empno) num_employees from dept d, emp e where d.deptno = e.deptno(+) and d.deptno = :P3_DEPTNO group by d.loc -- btw , what does the "+" sign mean?
    after the e.deptno in the where condition .
    but i am facing this error
    1 error has occurred
    Wrong number of columns selected in the SQL query. See Help of attribute for details.
    and it does not work with two columns in the select statement under any conditions , i tried to remove the group function and the group clause ,
    it does not work unless i use only one column in the select statement ??
    thanks

    Pars
    And how exactly is this rewrite of the sql statement resolving the OP's issue.
    You are still using more than 1 column which will still result in the error message:
    Wrong number of columns selected in the SQL query.
    As mentioned in my earlier post APEX 4.0 (the version the OP is using) does not handle a sql statement with multiple columns for the dynamic action Set Value.
    Which means the fastest  and simplest solution is splitting up the dynamic action in multiple Set Value actions.
    Using this plugin or upgrade to a newer apex version would also be a possibility.
    Nicolette

Maybe you are looking for