After I tried using the background effects my pictures were very dark, now when I try to take a regular picture it's completely black? how do I put it back so it will see me not pitch blackness?

I selected the clouds effect and turned my computer to the wall when it asked me to step out of frame when I turned it back to me and took the picture it was very dark, now when on normal I can't see anything else besides black

This a Photobooth question?
Regards
TD

Similar Messages

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

HT201260 Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

You usually have to use the program's uninstaller utility for such things as Symantec. Read this:
http://www.symantec.com/business/support/index?page=content&id=TECH132120
You may need to install it all over again, just to use its uninstaller.

I use windows and i got my hard disk replaced now when i try to sync wirelessly my ipod detects my computed as being a different one how can i make it forget the old one?

i use windows and i got my hard disk replaced now when i try to sync wirelessly my ipod detects my computed as being a different one how can i make it forget the old one?

You will have to sync it to the new one, erasing the current content from the ipod and replacing it with the content from the new drive.
Make sure you have copied everything from your backup copy of your computer back to the new drive first.

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

I uploaded the giftcard money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

i put money to my itunes account. and now when i try and buy a song it keeps saying that it has to charge my card. why wont it let me use the giftcard money? how can i fix this?

If you still have your old card listed on your account then try selecting the 'none' option and remove it and then try entering the card's details from scratch. If that doesn't work then what is the full error message that you are getting, and the card is registered to the same name and address (including format and spacing) that you have on your iTunes account ?

My touch shows the connect to itunes with usb on screen however when i try to do so it says it cannot connect because it is locked with a passcode. It will not let me enter the code on the ipod or computer. so i cant do anything. Any ideas?

I have tried rebooting it. nothing seems to help. it always ends up with the same screen a picture prompting me to hook up via usb to itunes.Then without fail i get an error message. itunes connpt connect to the ipod touch because it is locked with a passcode. you need to enter the passcode on the ipod touch first. unfortunately the touch will not show any other screen but the connect to itunes.

Connect the iPod touch to your iTunes library in Recovery Mode and restore it to factory setting. See this article for instructions on getting your device into Recovery Mode.
http://support.apple.com/kb/ht1808
B-rock

I have a new iMac..purchased 7 days ago.You have made change it says "You can't open your current photo library using this version of iPhoto. I purchased the iLife software and installed it succesfully. Now when I try to open iPhoto it says that a

After I installed the iLife software, I cannot access iPhoto. I made sure that I am updated to the newest iPhoto. It gives me the following message:
"You can't open your current photo library using this version of iPhoto."
You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?
What do I need to do?
Thanks
Matt

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

Working in Expert mode, with Layers, somehow locked up the first layer by using the eyedropper, and can't undo it. Now, when I go to Expert mode, this one layer shows up, with the tool still showing, and I can't even begin to edit a new photo, or get the

Working with Elements 12, in Expert mode, with the first layer, I did something to lock up the whole Expert mode. I can't get rid of the eyedropper tool, or cancel the layer I started. Now, when I put in a new image to edit, I can't even get the normal Expert editing dialogue that normally appears on the right side of the screen. Can you help me?

Oh and to add, when I downloaded the skype app onto my dad's air...I got a notification to my personal yahoo mail, it says:
Dear My Dad's Name ----------- weird because it's my email address
Your Apple ID, *my dad's apple id* was just used to download Skype for iPad from the App Store on a computer or device that had previously been associated with that Apple ID.
I'm guessing his apple ID is linked to my email address...however, when we checked his personal gmail account, he got the same email..

I made a path and saved it and when I try to select it, it turns my stage completely black? Can anyone help me?

As my question says, I am cropping out a figure exactly how I usually do it and for some reason this time it is not working. I made points with the pen tool and then moved it around with the direct selection tool (light grey pointer) and everything worked fine. I then saved the path and usually you just hold down control and click on the picture of the path next to the name and it selects it for you (marching ants) and then I select the inverse and delete the background. This time for some reason when I control and click on the image of the path, it just turns the stage completely black. When I undo it goes back to normal but everytime I try, the same thing happens. I am using Adobe Photoshop CS6 (64-Bit) By the way
Can anyone help me?? Thanks in advance

Can you show some screen captures. Ctrl+Click on a Path in the path palette should make a section from the combined path. Have your tried resetting you Photoshop preferences.

I have just had my hard drive replaced,I downloaded my files to a hard drive and now when I try to re start my iMac it ask's me to enter my pass word I do that but it's not recognise my pass word,what do I do?

I have had a new hard drive installed in my imac,I down loaded my files to a external hard drive,when I tried to re start,it asked for my password,I typed it in and it did not recognise it and I can't use my computer!can anybody help me please!!

Not sure why it's happened, but you could try resetting the password. These instructions work for Lion & Mountain Lion. If you're on Snow Leopard you'll need to use the install disk that came with the Mac.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

The songs I've added to my itunes library from cd's are no longer showing up in my itunes list. how do I put them back on from my ipod?

the songs I've added to my itunes library are no longer showing on my itunes account. how do I load them back on from my ipod

What do you mean by " on my itunes account"
and "in my itunes list"?

I use the 9.5.1 version of i photo but when i try to open it keep´s charging and i can't se the photos

what can i do to solve the problem

explain
What does "It keeps charging" mean?
are there any error messages?
What exactly does happen?
LN

I used my own Apple ID while installing somebody's phone, when they try to update apps they get up my Apple ID, how do I change it to theirs?

Hi.
I used my PC and configured up an new iPhone 5s. I was logged into my own Apple ID while installing it and recovering it from an older Safety Copy, the safety copy was done also while on this account. I want the owner of the 5S to use their own Apple ID on the iTunes store and on iCloud. I did register their iCloud account and used their Apple ID when on the phone for the first time, but whenever I try to update apps my ID shows up. Is there a way to change this ID to the owner of the 5S' owner without deleting all the apps, or somehow still recover them from the copy?

Try recovering them from the copy. If those copies are also associated with your Apple ID, no.
(97224)

After I tried using the background effects my pictures were very dark, now when I try to take a regular picture it's completely black? how do I put it back so it will see me not pitch blackness?

Similar Messages

Maybe you are looking for