After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

Similar Messages

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

Mini ipad is disabled and I downloaded Itunes but the exe file will not run

mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

"Recovered" CR2 files will not open in Photoshop CS6

My son recently completed the National Three Peaks Challenge. Regrettably, having taken loads of pictures, he discovered that one of the CF cards was corrupt. He and his fellow climbers have now paid a company (a considerable sum) to recover these photos and they are all showing as CR2 files. Unfortunately, neither Photoshop or any other program that he has (including Preview) will not open them. The images from the uncorrupted files are fine.
As you can imagine, he is desperate to get these images back so if anyone has any bright ideas as to where we go from here we would really appreciate it. Thanks in anticipation.

Thanks for your suggestion, normfb, which I passed on to my son. He has come back with the following answer -
"Tried the DNG converter, didn't even recognise there was a file in the folder I told it to look in!
The issue is that no programs be it Photoshop, that DNG converter, Lightroom or Preview are able to recognise that file format."
Appreciate the idea though.

CR2 files will not open in CS4 or Bridge.

I can not open CR2 file in CS4 or Bridge. The CR2 images show in the preview window when I click the "open" button under "file". When I select the image to open I get "Unable to complete your request because it is not the right kind of document." I have uninstalled and re-installed the sotware, installed all the updates and get the same results. Any sugestions?

dans2art wrote:
I can not open CR2 file
From which Canon camera model exactly?
The CR2 file is probably from a newer camera and probably requires Camera Raw 6 or higher.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS4 is only compatible with Camera Raw up to version 5.7
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
You either have to upgrade Photoshop to version CS6 or higher
Or convert the CR2 file to DNG using the free DNG converter then edit the DNG files in CS4.
http://www.adobe.com/products/photoshop/extend.displayTab2.html

PSCS6 no longer recognizes my CR2 files and will not open. Using Canon 5DMark III with updated Camera Raw . It has worked before but now won't open files from this camera.

I have been able to open files from this camera before but still checked for latest Camera Raw download. Still won't open files from this camera. Opens files from my 60D just fine. I downloaded the latest and it has worked before. What the heck is going on?

Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

After downloading latest CC and Photoshop CC 2014 system crashes at Welcome Screen

Is there any ability to roll-back to previous version??

SL@TW, Did you try disabling the Welcome screen? If not, try the suggestion marked as correct. How to disable the welcome screen?
If you could help us solve your crash, please provide us the Faulty module on which Photoshop crashed.
Check Event Viewer for the Faulty Module http://support.microsoft.com/kb/308427
Event Viewer > Windows Logs > Application
Look for "Error" in red color and check the Application name and faulty module.
~ Arpit

Since I update to the latest version of flashplayer my pdf file will not open. It keep tell me to update. How to resolve this problem?

It is important that I am able to open my PBF FILE. Error message up date to the latest version of flash player. I updated to the latest version and I am still, unable to open my pbf file. Any suggestion? I need to download a test.

Please tell us
1. What system you have (e.g Windows 7, Mac OS Mavericks...)
2. What version of Adobe Reader you have.
3. The exact wording of the message that you get
4. The web browser that you use

Indesign cc files will not accept color corrections to updated links. Opening links out of indesign into photoshop and updating. Why?

Any ideas from anyone?

I have the same crash problem, and right now I've found only this one topic. Still got no idea why InDesign crashes while starting trackers?
I use CC english international version @ dell vostro, win7. Deleting preferences files or setting permision change nothing.
Just installed Polish version, it runs ok.
regadrs
Podpis problemu:
Nazwa zdarzenia problemu: APPCRASH
Nazwa aplikacji: InDesign.exe
Wersja aplikacji: 10.0.0.70
Sygnatura czasowa aplikacji: 5362b4ea
Nazwa modułu z błędem: MSVCR110.dll
Wersja modułu z błędem: 11.0.51106.1
Sygnatura czasowa modułu z błędem: 5098826e
Kod wyjątku: 40000015
Przesunięcie wyjątku: 00000000000740da
Wersja systemu operacyjnego: 6.1.7601.2.1.0.256.48
Identyfikator ustawień regionalnych: 1045
Dodatkowe informacje 1: 50c4
Dodatkowe informacje 2: 50c4d85164a96dd87444c41de660c100
Dodatkowe informacje 3: 1a29
Dodatkowe informacje 4: 1a29553cbfccbd746079791d5d3ddec5
Przeczytaj w trybie online nasze zasady zachowania poufności informacji:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0415
Jeśli zasady zachowania poufności informacji w trybie online nie są dostępne, przeczytaj nasze zasady zachowania poufności informacji w trybie offline:
C:\Windows\system32\pl-PL\erofflps.txt

Browse in Bridge from Photoshop CC 2014 fails to open Bridge and wants to install new version

Hey community! I found a few similar posts, but couldn't find much of a resolution.
Last night I was working in PS CC 2014 and all was well. Used Browse from Bridge in PS. Everything is working fine all night long. Get up this morning, return to work, click browse in Bridge, and Creative Cloud desktop client pops up and says something about installing a new version of Bridge and will get rid of my old version. The first time I just though it was an update, so I said sure, install the new version. Then, CC wanted to update a few other apps (PS being one of them), so I closed down everything, and let it update everything while I got a cup of coffee. Came back and it looked like everything was finished updating. So I went back to work. Same thing happens again when I click browse in Bridge. I tried going directly to Bridge's launch icon and THAT at least opened the application. It was still open to the same folder I had been using the night before. I double-clicked on the PSD I was supposed to be working on, and then Illustrator pops up and is trying to open the PSD.
***Ok, so I fixed the association problem with Illustrator trying to open the PSD. I uninstalled my older version of PS CC last night after I was done working, which apparently broke the "file associations" in Windows. I just had to go tell Windows to open PSD files with PS CC 2014 (even though 2014 has been installed since it's release and that's all I've been using)***
Still can't get around the Browse in Bridge issue. It is not a real big deal TO ME where I click to open Bridge, but it does seem like a bug that needs fixing.
Thanks!

I have the same issue when trying to Browse in Bridge from Photoshop CC 2014. When I click "Browse in Bridge" in Photoshop CC 2014, the Creative Cloud desktop client window opens up and asks "Are you sure you want to install this version of Bridge"?
Like you, I also thought it was an update so I clicked' "Yes, install this version" option.
Bridge will launch from the dock icon I have set up, but not from within Photoshop CC 2014.
Any solutions to this bug anyone?

Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted. U43M1D207.

Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted. U43M1D207."
I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
https://forums.adobe.com/thread/1825014

Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

Hi everybody, adobe muse does not start at the first attempt after installation. know the reason and possible solution? (on iMac 27 retina - latest edition)

Hi
Are you still experiencing the issue or is it fixed now?

Opening a D80 NEF crashes Bridge and Photoshop CS4

Every time I try to open a D80 NEF file Photoshop and Bridge both crash. I have re-installed Photoshop and nothing different. I have deleted the library files for both apps. and nothing changes. What should i do next? It used to work when i opened the file from iPhoto. I am needing to edit these pictures.
I am on a iMac, running Mac OS X 10.5.6 with 4gb memory and 2.8 intel core 2 duo
Thanks

Colby Otte wrote:
What Kind of maintenance do you mean?
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be. I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be. This is just my own personal opinion and practice based on my own observations.
Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise. Note that this suggestion begins with "I still advocate…", not "Apple recommends…".
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night. If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388 Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large. Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE: There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject. Other, more reliable reports indicate that this seems to have been fixed in the current version of Leopard.
In any event, Repairing Permissions and/or running the Cron Scripts cannot hurt.
If you have DiskWarrior, run it regularly too. It can't hurt either, and it often improves stability and performance.

CC shows two versions of Photoshop: Photoshop CC and Photoshop CC (2014)

My CC subscription shows two versions of Photoshop. I tried to open both versions. Photoshop CC opened, Photoshop CC (2014) would not. I deleted it. Now CC shows one update available: Photoshop CC (2014). Anyone know what CC is doing?

John,
Thank you. Your guidance was spot on.
The following comment is for Adobe:
We have all seen the transition over time of the way software updates happen. I remember virus programs doing things like:
     It has been two weeks since I checked for updated virus signatures. Shall I check now? Yes
     There is a new virus signature available. Shall I download it? Yes
     I have downloaded the new virus signature. Shall I install it? Yes
     I have installed the new virus signature, but must restart the virus program to use it. Shall I do that? Yes
     I have rebooted the virus program and all is fine. OK.
I was really enjoying how Adobe would update the versions of their products in the Creative Cloud, and waiting for the day I'd have to trigger the activity. What I'd like is for Adobe to just do it. The way Apple has sort of standardized app updating is that you can adjust a setting and it will install updates automatically. Many vendors have a "What's new" screen that opens the first time after upgrading so you can see what's new. In the case when your concurrence is needed before installation, the upgrade is downloaded in the background and some descriptive information is provided so you can decide if you want to do it (this is typically for IOS major upgrades).
Adobe didn't handle the Photoshop CC to Photoshop CC (2014) well. I was very happy to lose the designator of which version I have. The version I want is: Latest. The two versions appeared (Photoshop CC and Photoshop CC (2014)) without explanation. John's instructions (above) indicated that you need to uninstall Photoshop CC, shut down and then restart the Creative Cloud App, then download and install the new version. Why did I have to go through a forum entry when Adobe could have simply put a line under Photoshop CC (2014) that said "Important: read this" and then provided an explanation of what's going on and how to do it. (BTW, that is a mediocre solution. The right solution would be to tell you what's up and then give you the option to click on a button which would have triggered all the steps to replace one version with the other.)
So, bottom line, I have never been an Adobe fan. I moved to Lightroom because of the Photography special offer and I am hooked. Updating Lightroom to support iPads and iPhones was just super. My expectations soared. This update didn't meet them.
But, have a nice day anyway!

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

Similar Messages

Maybe you are looking for