Mini ipad is disabled and I downloaded Itunes but the exe file will not run
mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?
Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/ -
Error in downloading itunes in windows, all the .exe files turn into the itunes icon
Download the lnk registry fix from www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. Reinstall iTunes. Should you find that all of your desktop shortcuts have again turned into links to the iTunes application apply the patch.
For further advice see Troubleshooting issues with iTunes for Windows updates.
tt2 -
hi, i have to reset an ipad from work which belonged to another employee. It says on the screen that it is disabled and connect to itunes but when i try to connect it says error i need the passcode, can anyone help?
You have to use recovery mode which will totally erase the iPad. Read here.
iPad: Unable to update or restore - Support - Apple -
My ipad is disabled and I updated it, then the apple id and password were required I entered it but the itunes says this email cannot be used to unlock this ipad. So what can I do? anybody help me please.
is it the ipad that is disable or your Apple ID?
This article contains instructions on what to do if have forgotten your passcode or your device is disabled:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Contacting apple id support
http://www.apple.com/support/appleid/contact/ -
HT1349 ipad displays disabled and connect to itunes. how do I go about this?
My Ipad displays disabled and connect to itunes. How do I go about this? I have already did the home/power but still not working..Please help
The iPad is telling you what to do. Connect the iPad to your computer and launch iTunes. You probably need to restore the device. If it was disabled because you forgot the pass code, you will have to restore using recovery mode. As long as you restore with the computer that you always sync with, you will be able to restore from your backup at the very end and you will not lose any data.
This explains how to restore the iPad.
http://support.apple.com/kb/HT1414
This explains recovery mode.
http://support.apple.com/kb/ht4097
This explains the disabled message if you forgot the passcode.
http://support.apple.com/kb/HT1212 -
i just bought a song on itunes and it downloaded it but for some reason is not playing. o you know why?
- Try a reset. it cures many ill and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Does it play in iTunes on the computer?
- Delete the song and redownload it by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Ask iTunes for a redownload.
How to report an issue with Your iTunes Store purchase -
I was buying songs on my Itunes account and I signed-out and now my Itunes icon on my desktop will not work at all. How do you access your account
http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable. -
I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?
Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered. -
My playlist appears in itunes, but the music files have mysteriously disappeared from my iTunes Media file. Is there a way to recover them? Tried searching and cannot find them.
This page might help: http://support.creative.com/kb/ShowArticle.aspx?sid=44083
Older Zens don't support AAC, which is the format iTunes uses for songs.
You can convert from AAC to MP3, which every media player under the sun will play. Here's a tutorial: http://reviews.cnet.com/8301-12519_7-10096807-49.html -
I have moved my file from my old computer. Now that I am trying to play songs and movies iTunes says the original file could not be found. How do I reverse this problem?
Put the files back where iTunes expects them to be.
-
I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??
If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network -
The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.
GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
I cannot back up my i pad to my iTunes, but the error message is not always the same.
I cannot back up my i pad to my iTunes, but the error message is not always the same. I get everything from could not back up "because the iPad disconnected" to could not back up "because the iPad was not set up."
Here are things I tried that did not help:
1) I turned my iPad off then turned it back on.
2) I backed up my iPod touch to see what happened, and it went fine.
3) I tried a different cord to connect the computer to the iPad.
4) I updated my iPad
5) I updated my iTunes
Any other suggestions? Thanks!!There are multiple places where these photos could be stored:
- a recent iCloud back up
- on your PC/Mac if you imported them
- Photostream if you used it
Unfortunately if the photos are not stored in any of these locations then they have been lost for good.
All the best
Maybe you are looking for
-
HELP!!! ITUNES STOPS WORKING!!
I'm having problems getting Itunes to stay open. When I open it on my pc, which runs Microsoft Vista 32bit Home Premium, it closes saying that Itunes has stopped working. I have tried to uninstall Itunes using the instructions placed by Apple, but I'
-
Colouring text in photoshop elements 9
I have tried choosing the text layer, selecting the text and choosing a colour from the menu at the top of the screen and I have tried selecting each letter individually and trying to block fill them with the paintpot tool,but the letters remain blac
-
Getting the email of the first owner of an iphone,
Im new to iphone 5S, i bought one from a person over internet, when i get the iphone, i foud it locked by icould, im not in same country where the iphone is activated, i ask if possible to contact the first owner of the iphone (by email). Only wha
-
TGA format not recognized!
Hi, I have had this problem for a while, and surprisingly I did not find any mention of it in the forums. I cannot see Targa (.tga) files with GQview or xzgv, although the man says they support it. I can view/save them with Gimp and other specific ap
-
Customizing Sap Script ????
I am customizing predefined form MEDRUCK and making the 3 forms ZMEDRUCK1,ZMEDRUCK2,ZMEDRUCK3 each form i am adding different fields which are not available in the predefined form. I am using predefined print program SAPFM06P i dont want to change th