After installed the Lion, my Mac could not connect to internet. At least the my apple Mac turn on second time, then it would connect to the network. Who can tell how to fix it? Thanks!

Since my iMac OSX have installed the Lion last week, my iMac could not connect to the internet in the first turn on, and at least I turn off the computer, and turn it on again, then there is not problem to connect to the internet. So, it take much time to access to network.
Today I called apple store to fix the problem. They rebooted my system with their distance control.By that time, it seems work. But after couple hours later, I turn on my iMac, there is not connection to the network again. I hope someone could help me to solve that problem. Thanks!

I think I would call them back to follow up. As far as they know, everything is fine. But if you call back they can continue from where they were. They usually give a case number either over the phone the first time you called, or in an email later.

Similar Messages

  • So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

    So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
    anybody can help me ?

  • HT1338 After install mountain lion my superdrive do not work

    i facing problem after install mountain lion 10.8.2. my superdrive do not work properly , when i insert a disk to superdrive after 20-30 seconds left cd eject. if you have any solution about solve this problem , pls tell me. 

    After recently upgrading my mid-2010 Mac Mini from Lion to Mountain Lion 10.8.2 my superdrive stopped working. I did a clean install of Lion to a blank SSD. Then I upgraded to Mountain Lion from the App Store. Then I tried reading a Windows 7 installation DVD. Any DVD I insert in the internal superdrive is not recognized by the system and is ejected after a few seconds.
    I tried cleaning the superdrive with a DVD lens cleaner. This did not fix the problem.
    I tried a SMC reset. This did not fix the problem.
    I tried an NVRAM/PRAM reset. This did not fix the problem.
    I read on a related thread...
    https://discussions.apple.com/thread/4150905?start=30&tstart=0
    ...that many Mountain Lion users have experienced the same issue.
    I opened the Console to look for new messages appearing after inserting a DVD-ROM into the superdrive. No messages appeared while the superdrive whirred a few times and then ejected the DVD-ROM.
    Apple have been made aware of the issue but no patch has been issued. Mountain Lion 10.8.2 is the current version with no updates available at the time of writing.
    Some users with dual-boot systems have booted into Windows and their superdrive works fine. This points to a software issue with Mountain Lion. The problem appears to affect some systems and not others.
    Other users have reported that their superdrive works again after downgrading to Lion or Snow Leopard.
    I'm going to try booting ML into Safe Mode to see if the superdrive works. I'll then try downgrading to Lion or Snow Leopard to see if the superdrive works ok. That at least will confirm that it is a Mountain Lion upgrade related issue and not a superdrive hardware failure.
    Then we will have to wait for a patch from Apple to resolve the issue so we can upgrade to ML without losing use of the optical drive!

  • I'm having trouble backing up my second macbook to a new time capsule.   continue to get an error message -- "Time  Machine Error.  The backup disk image could not be created."   Is there something I need to change in my time capsule or time machine?

    I just set up a new time capsule.  it worked fine on my first macbook.  But now I cannot backup my second macbook.   Getting "Time Machine Error"  "The backup disk image could not be created."  Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

    Try #C9 in Pondini's Time Machine Troublshooting
    http://pondini.org/TM/Troubleshooting.html

  • Who can tell how to solve about the apple ID, because my apple ID was been disabled since two last week. And, i tried change my password through iForgot. Anyone? Thanks.

    Anyone? Thanks ;) tell me
    How to solve about the "apple ID has been disabled"?

    I am having the same issue. I just got my Iphone4 on Friday and no matter what I do to confirm my AppleID, it says its been disabled. Anyone have any ideas?

  • I am trying to install OSX and I get "could not find installation information for this machine" what do it do?

    Trying to install OSX and i get "could not find installation information for this machine" what do i do?

    someone will be by to edit, in the meantime, NEVER post your serial number.
    They wanted you to go to the Hardware section of System Profile and the part that looks like
    MACBOOK PRO N,1
    Anyone here has Mac Pro of 1,1 thru 6,1
    http://www.everymac.com is a good place to look at model specs and history of that model, max RAM and other features.

  • After installing Mt. Lion, Mail no longer asks for a password, even though I set preference for using a password.

    After installing Mt. Lion 10.8.2, Mail no longer asks for a password before opening messages, even though I tried to set preferences for using the password. Help!

    In Mail Preferences, Accounts item: I tried to delete the password (but that did not save). I got this idea from some Mail Help item that I cannot seem to find again. I cannot recall how I did it in Snow Leopard, but I had it set to ask for a password that was used solely for Mail. It would not download anything until I entered that password. Note: I am not on a network; just the single user of the MacPro. Thank you for any guidance you might be able to offer.

  • The common language runtime could not be loaded.

    The common language runtime could not be loaded error in receiving while opening excel file in windows 7.

    Hi,
    Is this problem just occures when opening excel file? How about other office program?
    Did you make any change to your Office, such as install language package, etc. that may cause this problem?
    Since your problem is specific with Office program, it would be better to provide your question at Office Forum.
    https://social.technet.microsoft.com/Forums/office/en-US/home?forum=officeitpro
    Roger Lu
    TechNet Community Support

  • How do I stop the dialog, "The Application "Transport Monitor" could not be launched because..." from appearing?

    The dialog appears exactly like this, "The application "Transport Monitor" could not be launched because of a shared library error: "h<__ct__16CTransportRelMacFP18OpaqueTransportRefUc>"
    I tried to get this resolved by following the Solution ID: 14020. Here is the problem. There is NO "Install Utility" in any of the Palm Desktop Installer file (either on the CD or downloaded from the website).
    In addition, I uninstalled Missing Sync the deleted Palm. I then re-installed Palm and Missing Sync respectively. The problem persists.
    Help!
    Post relates to: Treo 650 (Cingular)

    Ok,
    I have been thrashing on this one for a while. PLEASE, PLEASE, if this helped you pass this along to other forums because there are tons of people out there with this same issue and NO USEFUL information from PALM to fix it.
    The fix is easy. Basically the problem is that there is a remaining process running in FreeBSD subsystem that must be stopped in order to reinstall the hotsync/palm application correctly.
    Log in as root/administrator
    Go to terminal and type:
    ps -ax | grep -i palm
    this will show all processes that are running in the system that are part of the palm software.
    note the process number (on the left) of the list.
    killl nnn
    i.e if the left column says 654 type "kill 654" and hit enter
    now do the ps -ax again and make sure the process stopped.
    This also fixes that other issue when you try to empty the trash and you get an error that says Localized.rsrc is in USE. blah , blah, blah
    Now reinstall the palm software and breath a big sigh of relief. Have a beer and sync your palm.
    ..jeff

  • HT202696 Trying to reset to factory settings it says could not find installation information for this machine contact Apple care

    Trying to to reset to factory settings to set up the installation it says could not find installation information for this machine contact Apple care. What does this mean

    Try another internet connection.

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • While upgrading Mac App Store Kindle I get the 'The product distribution file could not be verified. It may be damaged or was not signed.' message. How to fix it?

    While upgrading Kindle from Mac App Store I get the message 'The product distribution file could not be verified. It may be damaged or was not signed.' How can I fix it?

    Quit the App Store if it's open.
    Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
    Type this exactly as you see it here:
    /Library/Preferences/SystemConfiguration
    Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
    Relaunch the App Store and try downloading Mountain Lion.

  • When trying to download Mountain Lion after click on buy I get this message: The product distribution file could not be verified. It may be damaged or was not signed.

    when trying to download Mountain Lion after click on buy I get this message: The product distribution file could not be verified. It may be damaged or was not signed.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Always search the forum before posting. This is asked at least three times just below your post.
    https://discussions.apple.com/thread/3604789?tstart=0
    https://discussions.apple.com/thread/4153268?tstart=0

  • After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

    After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
    During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

Maybe you are looking for