After installing cs3 on windows 7 i lose internet connectivity

I install cs3 and everything goes fine... I can open programs and they work, but it shuts down my Internet connection! i can still see my local network but no Internet. when i uninstall cs3 my connection returns straight away.... adobes answer to this was give us £550 to upgrade!! what a joke!!! I'am running win 7 pro 32bit

before i installed i run ipconfig....
192.168.1.151
255.255.255.0
192.168.1.12
it all works fine, the cs3 installed and all programs work! however when i restart my machine i lose the internet.
i run ipconfig again and got the following...
192.168.1.151
255.255.255.0
0.0.0.0
192.168.1.12
its seems cs3 affects dynamic ip's, so i set a static IP, restarted my machine and now everything works fine!!!!!
thanks yet again adobe for not helping!!!

Similar Messages

  • Fix the: Cannot view PDFs in Safari Window after installing CS3

    All,
    To fix the problem of displaying PDF files in Safari after installing CS3.
    Open Adobe Acrobat 8 and then go to the preference menu, on the left hand side look for internet, select this option and then UNCHECK the options to use to open PDFs.
    Apply and quit Adobe Acrobat 8. Quit Safari if still running and then reopen. What Safari does now is use the default settings and will open the PDFs as before.

    If it's not essential that the Adobe plugin handles PDF files then try turning off the plugin support via Adobe Reader preferences -> Internet -> Unselect the option to handle PDF files (sorry, I'm not on a Mac to quote the exact text but it's words to that effect).
    If no other plugins handle PDFs, Safari should pick up the slack and handle them natively.

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • HT1923 how do you get the dvd drive back after installing itunes to windows 7

    How do you get the dvd drive back after installing itunes to windows 7??

    Safari/Preferences/General and set a new default.

  • After installing 10.5 window comes up - itunes has stopped working. Check online for a solution and Close program.

    after installing 10.5 window comes up - the window comes up "run or cancel"  I click run.  It says "Installer completed." click finish (only options)  "itunes has stopped working. Check online for a solution and Close program." 

    Hi marymike,
    The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
    Please try the suggested steps mentioned and check.
    Regards,
    Rave

  • How do I re-install cs3 on Windows 8?

    I uninstalled cs3 on Windows 8 because an error came up when I tried to open the program.  It said to uninstall the program and then re-install it.  Now I can't re-install it on windows 8.  Error keeps occurring saying "Component install failed" for both cs3 and shared components. How do I re-install cs3 on Windows 8?

    uninstall anything cs3 that still shows as being installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.

  • After installing an update it now won't connect to the Internet at all?

    I was online and a Firefox update popped up, it strongly suggested I install it which I did, my Internet connection is "good" but my home page won't load and just continues to show UNABLE TO CONNECT.......I'm at a loss!

    Yes I'm having the same problem of Firefox 15.0 not connecting to my sites and seems to stay in search mode. I have added Firefox to my firewall to allow it access but all to no avail. Other browsers such as Google Chrome and IE connect to my sites but not Firefox. Any other suggestions would be welcomed.

  • 7510e printer loses internet connectivity when it goes to sleep

    I own a 7510e all in one printer, I connected it wireless again after having it connected with a USB
    cable, I had to do this because my printer loses internet connectivity when it goes to sleep or if I get a power outage, this has been going on since I purchased it last year. I got a new wireless router/modem combo from my ISP server and hoped that would solve the problem but it has not.
    I cannot get any apps except for those that are on the front of my printer which are just for small kids. I am now told that this printer has been discontinued and 7520 has replaced it, I do not wish to spend another $200.00 in less than a year for a printer. It is registered with HP connected and I have a Efax # and HP connected address, I did everything correctly but it seems that each time I set it up wireless it messes up my desktop windows 7 home premium 64 bit, cloud services told me not to use  IE 10 but we are ready to download IE11 so I am using IE 10, this time HP support assistant quit working and I could not even uninstall it until I downloaded microsoft fix it and then redownloaded it from HP web site.
    If anyone has any ideas I would appreciate it, I am not on a home group yet it always tells me I do not have administrators permission to do a lot of things, I am the only user.

    Hi emma22
    Here is a document for Getting the Latest Firmware and Product Updates.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02979046&cc=us&dlc=en&lc=en&os=4063&product=507...
    I checked and there is no way to turn off the sleep mode on this model.
    I included a document for Printer Does Not Maintain Wireless Connection and to try Solution three: Assign a static IP address to the printer. You will need to get your It department most likely to set this up for you if you don't have full admin rights.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03678348&tmp_task=solveCategory&cc=us&dlc=en&la...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My WRT54G v5 router loses internet connection frequently

    My WRT54G v5 router loses internet connection frequently. Sometimes occurs when you enter a web or sometimes every few minutes, but without a pattern. I have W XP Pro with SP3 and I have a pc wired to the router and sometimes 2 notebook with Wi-Fi. What could be the problem?. Thank you very much.

    I have upgraded the firmware to v 1.02.8 and reduced the MTU to 1350 but after a few minutes of doing that I had the same problem... The router reboots itself, again and again and again...
    It's possible to run some diagnostic utility that somebody can check ??  
    It's possible it would be a router failure ??
    I note that sometimes is ok and when Entering some web pages the router reboots itself and I loose my internet connection, but others, the router reboots for no apparent reason...
    I dont know what to do...

  • My ipad mini loses Internet connection every time it automatically locks.

    My ipad mini loses Internet connection every time it automatically locks. I have to re-establish the connection but sometimes it would take too long for the Internet to be connected. I'm using a wireless connection

    just browsing around I found this question. Also on my mini retina I fight with this problem. After a lot of searching I found that the only solution is to switch to
    Airplane Mode, wait few seconds and switch again.
    Or, if you are lucky, to find a Genius who replaces your unit. Cheers

  • All devices on network lose internet connection when Dell laptop connected

    I have successfully setup my AEBS network and am using two wireless clients--HP printer and Xbox access point (both 802.11 G) and a wired iMac that also is connected via Airport (so I can move it around if i want). I tried connecting my Dell Latitude D830 wirelessly and within a few minutes of connecting the AEBS loses internet connectivity. Unplugging and restarting the AEBS restores the internet but it just drops off again in less than 10 minutes. My question is, what might be causing this and what can I do about it? One peculiar thing to me is that I am using the WEP security option since the Xbox doesn't seem to support WAP2. When connecting the Xbox it reports the network as WEP but the HP printer and Dell Laptop but suggested the network was indeed WAP even though I'm clearing using WEP security. Maybe it's nothing but wanted to add for completeness.
    The Dell is running Vista Enterprise edition.
    Thanks for any help.

    I've noticed a similar issue. Any time my HP/Vista laptop is connected to my AEBS it loses the network connection at inconsistant time intervals(~10-15 min).

  • I lose internet connection every time my computer sleeps

    HI, I lose internet connectivity everytime my laptop sleeps or shuts down. why? and how do I maintain connectivity with wireless router?

    If you had mountain lion, you could've used a feature called power nap. It keeps networking on even when the mac is asleep.
    On other OS, I guess its bound to disconnect all networks when it goes to sleep You can try an app called Caffeine that doesn't let it go to sleep.

  • Keep lose internet connection on my lumia 800

    I keep lose internet connection on my lumia 800 to get connection i have to turn my phone off and on why?
    Moderator's notes: The post was edited. A more appropriate subject is provided.

    I would suggest getting a new sim card,as you have not explained through how your using it im gathering your using it via data.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Mac Pro running 10.10.2 loses internet connection when sleeping

    My Mac Pro running 10.10.2 loses its internet connection only when it goes to sleep. I always have to jump through hoops to reconnect to the internet when it wakes

    Try suggested links
    http://www.bing.com/search?q=mac+loses+internet+connection+fix

  • Connecting printer to TC makes me lose internet connection

    When trying to connect my Canon Pixma MP550 to the Time Capsule, I encountered a mysterious problem: I can print from my MBP via TC but I am losing the internet connection (the DSL light on my ADSL modem starts to blink and the AirPort Utility says that there is a problem with the PPoE connection.
    Anyone having the same problem? Any help would be greatly appreciated!

    I have discovered that the problem was probably not related to the printer (even if other USB devices like memory sticks work when plugged in the TC). When trying to do a faster Time Machine backup and connecting my laptop to the TC with an Ethernet cable, the same thing happens - my modem loses Internet connection. Very curious, and to the date noone has been capable to find a solution...

Maybe you are looking for

  • Printing Only visible text

    Hi, I am trying to print an editable PDF from Adobe reader. The issue is that only the text visible in the edit boxes are printing. I have several paragraphs of written text in the editable boxes, but when it only prints the few sentences that are vi

  • Pausing a slide show created in iDVD.

    I'm using iDVD to create slide shows and then burning to a DVD, but I can't pause the slide shows when they are showing on the TV. Is there a way to do this?

  • AT&T Yahoo Mail Problems since Snow Leopard

    Before my upgrade to SL I used an AT&T Yahoo POP account in Mail. When I upgraded to SL, the account upgraded without a problem. I am now trying to add my husband's AT&T Yahoo POP account and I keep getting the following message: "Logging in to the a

  • How to add org infotypes to the PA infotypes in the ad-hoc report infoset?

    HI experts, We created a new object in OM. I want to get the holder of the position using the following linkage. Please explain. e.g. Z1 (new object)>> using new relationship ZR >> position >> rel. A008(holder) >> holder Pernr. Is it possible to get

  • Asking Again: Group Description Updated in Admin UI is not reflected in PowerShell and vice versa

    I've updated the Groups Description (About Me) using the GUI / Website.  Then running a script to output the Group's Description like: $siteUrl = "site url" $web = Get-SPWeb $siteUrl $web.SiteGroups $web.Dispose() The description doesn't change.  I c