How to add org infotypes to the PA infotypes in the ad-hoc report infoset?

HI experts,
We created a new object in OM. I want to get the holder of the position using the following linkage. Please explain. e.g. Z1 (new object)>> using new relationship ZR >> position >> rel. A008(holder) >> holder Pernr.
Is it possible to get it in one shot.
Please explain..
Thanks,
Rashmi

Hi,
Check table - T778O or node : Personnel Management > Organizational Management>Basic Settings>Data Model Enhancement > Maintain Object Types
Maintain Relationship:
Personnel Management > Organizational Management>Basic Settings>Data Model Enhancement > Relationship Maintenance > Maintain Relationships
Go to PO13 to assign relationship to position to person.
All the best, if it resolves your problem, close this window by following process of awarding points.
Regards
Santosh

Similar Messages

How to add a customer field or extn coll in the tab1&2&3..of a UDO doc?

Hi Experts,
Does anybody know how to add a customer field or extn collection in the unused tabs like tab1&2...in a UDO document?
Thanks for your reply in advance.
Thanks & Regards,
David

Hi Subhasini - 
It seems you have discovered that adding an extension field to the Project Suppliers collection is not possible; many of the collections in E-Sourcing do not support extensions and, even when they do, typically, the table view of the data cannot be changed to show the extension value (it would only show on a "details" page, for example. 
The solution that you have proposed may work, although I think there is a slight mistake in your logic. I believe you are saying that the script would take data from the newly created extension collection and populate data in the out-of-the-box vendor collection. 
In thinking about your solution, I believe the benefit is that any logic and reporting based on the standard collection continues to function correctly (e.g., creating an RFx from the Project will use the out-of-the-box vendor collection). 
That being said, I generally am reluctant to do a "replace" of a standard collection with an extension collection as you propose. My recommendation is that you challenge the customer on the importance of this requirement. For example, could the code be maintained on the vendor record? Why is it maintained in Projects? If it is maintained in the vendor record, could you just populate a read only collection the Projects that shows the vendor and code? Could a report be written that can be launched from within the Project to show the values? How does the customer intend to use this field? Could the display name of the vendor object be the right place for it? 
I hope these ideas are helpful. 
Regards, 
Rob

How to Add a parameter of currency exchange rate in the selection screen

Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
Sridhar

TCURR-UKURS.
~Suresh

How to add a graphic watermark that is bigger than the photo?

How to add a graphic watermark that is bigger than the photo?
     Basically I want to add a watermark that is a border, like "outside stroke" so that it doesn't clip the photo.
     Upper, left and right side are 10px and on the bottom is my signature that is 40px high. I know how to do this in Photoshop, but can't figgure it out in Lightroom.
     The inset function with negative numbers doesn't work, because it only export to the size of the exported image, instead it should resize the image with those 10px up, left and right and 40px on      the bottom.
My bordes look like this either one of the two can be used, and if you scroll down you will se how the end result should look like.
And below is what it should look like, so that Lightroom doesn't clip the photo.

Are you sure the focus of your piano roll is on the right track? Are you zoomed in/out enough?

How to add a port for a IP cam in the airport extreme setting? thx!

I has buy a IP cam, but I don't know how to add a port for a IP cam in the airport extreme setting? (I can see the IP cam in local, but not the internet.) Many Thanks!

atwoodjordan, Welcome to the discussion area!
See Steve Newstrum's user tip "How do I use Port Mapping (Part I)". When it talks about giving your Mac a static IP address just substitute camera instead.

How to add a delete button on each row of the table.

i create a table with a list , and i add a new column.
and then i drag a delete botton from the list operation to the column.
when i create several rows. and click any delete botton of the new created rows. all the new created rows will be deleted.
rows that already exist when the page render are not influenced.and when i click these rows' delete botton,
just the current row will be delete.
that's because when i click the new created rows' delete botton,all the new created botton in this column will automatically be clicked.
i think adf consider all the delete botton are the same one.
is it the table bug? please tell me how to resolve this problem. thanks.
Edited by: 917391 on 2012-3-21 下午6:53
Edited by: 917391 on 2012-3-21 下午10:07
Edited by: 917391 on 2012-3-21 下午10:16

i don't use the adf BC, so it is not a VO. it's just a service method that return a list.
and i create the datacontrol and drag it to the page.
Edited by: 917391 on 2012-3-21 下午10:26

How to add a separate community of user (customer) in the same REALM?

I have an existing default REALM we have been using for internal users (i.e employees). Now I have a new community of users (i.e customers) but I want to use the same REALM and the same policy but be able to separate those two communities into two different containers.
current realm where employee accounts are: cn=users, dc=mycompany,dc=com
I want to be able to add customer accounts in the same realm but I need also those customers accounts to not be viewable when a user perform a search in the directory using the self service console.
How do i do that? I have been researching the documentation but I'm not looking for what I need.
Any help really appreciated.

I guess that this was the main reason to have multiple realms.
When users are in the same realm your ACI covering the subtree (cn=users in this case) allow people to search in this realm.
You could of course add a special attribute to the orcluserv2 or create a new objectclass customer with this attribute. Then - when you create a new user in the realm this needs to ba added. However - this is far from trivial - and furthermore you need to ensure that all tools (eg oiddas) support this - which is even more difficult to accomplish.
In the past I have done this in the following way:
Created a subtree cn=regionalmanagers,dc=mycompany,dc=com
Within this tree I had entries that were composed with my own objectclass. This objectclass contained a group (uniquemembers) and I added the users (cn=John.Doe,cn=Users,dc=mycompany,dc=com) to this group. Then I checked from the application with dbms_ldap calls if a user was a regional manager.
cu
Andreas

How to add "Prepare Data" from a web service to the form

Hello,
Can any one please advise on how to add the "Prepare Data" process from the existing web service and have the form to pre-populate the data from this "Prepare Data" process instead of using schema xsd. I heard that this is an alternative or may be a better way to pre-populate data in ES2/ES3 to avoiding creating a data source in Form Designer. I try to find a sample on Adobe site but could not find one, most of them are using schema.
Any guidance or URL to the sample would be helpful.
Thanks,
HD

Thanks

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

How to add a photo to a pdf form via the iOS app

How do I add a photo to a pdf form via the iOS app? I need to fill out a form for work using field observations and photos. I can easily fill out the text portions of the form but I'm unable to add the photos from my phone. Is this possible?

Does the form have a provision to insert images (e.g. a Browse button)?
[topic moved to iOS subforum]

How to add a Title (slide? screen?) BEFORE the video track

Hello,
I'm very new to Adobe Premiere Pro and I'm trying to figure out how to add a title to my project but I don't want the title on the start of the video in the sequence. I'd like to add it to a black screen, maybe with some transition effects, that will play prior to the video starting. Do I need to create a black image in CS and add it as a still and just add the title to the still which I can position before the video/audio track A starts?
I'm hoping that there's something I can do right within Premiere that will give me a place to put the title before my video starts. I didn't see an option to add a blank slide or something to that effect that I can add title to.
thanks for your assistance!
The more I learn the more excited I get, this software is great.

Thanks for the link.. like I said in my post, I'm brand new to the software and I've been watching and following guides for hours. Time is not on my side, I have a project that must be done by the end of this week and I have very limited time after work.
So when I have the head at the begining of my main track and click INSERT in the source monitor window it inserts a duplicate of the entire video so I have TWO videos in my sequence. This is clearly not what I'm wanting so I'm assuming that there's something I'm missing. I've searched google but don't see anything.
I'm just looking to add a black, blank screen that I can add a title to before my video begins. I realize this may be rudamentary to season vets but as I said, I'm very new and trying to learn this all quickly and I would really appreciate if someone could point me directly to some information about it. I'm not afraid to read and learn, hell I love it, but I'm pressed for time so someone just telling me, "go learn the software" with a link to a huge FAQ, doesn't really help me.
I've already learned a ton from some great guides but I have yet to have anyone indicate how to add extra footage (be it a still or blank video) directly from Premiere Pro.
Thank you all for your time!
EDIT: I think I figured it out... I just bumped the start of the main track up about 10 seconds and I added new item "Black Screen" right in front of it. I will add the title to this. Thanks all.

How to add a field in a table control of the subscreen 6103 of tcode f-03

hi abap gurus....i m new to abap and this is my first post ..i m hoping for a reply soon as it is urgent....
my requirement is to add a field PAYR-CHECF to a table control of the subscreen 6103 of tcode f-03

Hi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
-   Maintain/supply your own customer fields
-   Update your own customer-specific tables
You cannot:
-   Change standard fields
-   Change data that depends on the document header in the items
-   Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit

How to add * wild card to a specific field on the selection-screen.

Hello,
How to add a * WIld card to a field in selection screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_STCTS FOR G_STCTS OBLIGATORY, "NUMBER SCHEME
S_AT20A FOR G_ATTR20A, "SUBSTANCE ID
SELECTION-SCREEN END OF BLOCK B1.
I need to add Wild card functionality to Number scheme field S_STCTS on selection-screen.
Any suggestions would be apprecaited..
Regards,
Kittu

Hi Kittu,
Here is one sample code:-
select-option : s_name like kna1-name1.
start-of-selection.
if s_name-low = '*'.
select * from kna1 into table it_kna1.
elseif s_name-low = 'pat*' or s_name-low = 'pat'.
select * from kna1 into table it_kna1 where name1 like 'Pat%'.
endif.
In case of wild card Select should be :-
select * from <dbtab> where <field> like 'P%'.
You can also use RANGES in your Code.
E.g. RANGES: R_OBJNR FOR JEST-OBJNR
R_OBJNR-SIGN = 'I'.
R_OBJNR-OPTION = 'CP'.
R_OBJNR-LOW = 'K1*'.
R_OBJNR-HIGH = 'K2*'.
Hope this helps.
Thanks & Regards
Jitendra Gujarathi

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How to add org infotypes to the PA infotypes in the ad-hoc report infoset?

Similar Messages

Maybe you are looking for