After installing Snow Leopard on MacPro with 23" HD monitor I have noticed an anomaly when scrolling up or down, a horizontal ripple appears briefly, I have tested other browsers and there is no problem, only in FF 8. What is causing this?

Hi applecore_eater,
When Leopard came out, machines were shipping with Tiger for 3-5 months after it's release. So the fact that you bought a machine with Leopard still installed is not uncommon, especially considering we're not even a month into release. Matter of fact, I'd be surprised to see a lot of machines (unless CTO) that are coming with Snow Leopard.
The battery issue is not specific to Snow Leopard or the MacBook Air. I've deployed SL to about 15-20 MacBook Airs and all of them have been perfectly fine (batteries).

Similar Messages

Met with a white screen after installing Snow Leopard on Macbook (mid 2007)

After installing Snow Leopard on my Mid 2007 mac book pro I was prompted to restart. I restarted and the computer turned on but only got as far as a white screen that stays white with no further activity for an indefinite amount of time. I've restarted the computer a few times with the same results. How do I fix this and get past the white screen?!

Try booting into "verbose mode". That will cause a series of messages to appear on the screen during the boot process. When that stalls (presuming it does so), write down the last few messages and post them as a reply.
You might also try running the diagnostics that came with that Mac. Depending on the model, you can boot with the "system restore disc" in the machine with the "D" key held down to run those. Run the diagnostics several times.

After installing Snow Leopard problems with using any of my Helvetica fonts

I've never really have a problem with any of apple's products until now.
After installing Snow Leopard I've found problems with using any of my Helvetica fonts,
which is a BIG problem if you work in DTP or print. You CAN'T remove the system version of Helvetica, and replace it with your own anymore.
Also Flash CS4 seems to be a dead duck, as after about 5-6 seconds of loading the program it crashes with a "KERNPROTECTIONFAILURE".
<title edited by host>

Thanks Tom but the original post title was "Work in DTP, don't install snow leopard", but of course apple were unhappy with the title. I know the issue/problem has been discussed for months, the real problem is that it shouldn't be a problem which everyone has to find work arounds for.
After 4 days of playing about, I've finally got flash CS4 working and Quarkxpress was also a big problem for a few months. Printer description (PPD) files which snow leopard doesn't like, but worked in tiger & leopard.....means I can't use my two A3 inkjets for proofing anymore.
I'm just disappointed by snow leopard

Hard drives damaged after installing Snow Leopard :(

After installing Snow Leopard all software seemed to work fine. Then I found out that e-sata doesn't seem to work well with Snow.
I've tried two different e-sata cards, including CalDigit's FASTA-2e, which CalDigit claims works fine with 10.6.
My external enclosure appeared and immediately gave me a kernel panic. I tried several times with different working drives and now they are all heavily damaged. Kernal panic after kernal panic, I am noe having a difficult time accessing the data.
Now here's the strange part...after going back to Leopard 10.5, my internal drives all seemed to be infected as well. After using Disk Warrior and apple's disc utility, I got those working ok.
What could be going wrong here? I installed Snow. It was fast. But it wasn't worth it...at least not yet.
If there's anything else I might be doing wrong or any way to fix these drives now, please let me know.
Thanks all!

It seems that Sonnet is not yet compatible with Snow Leopard either. That issue was covered here: http://discussions.apple.com/thread.jspa?threadID=2114442&tstart=0.
Anyone know if RocketRAID eSATA for Mac works with Snow? Apple sells it...
http://store.apple.com/us/product/TW106LL/A?mco=NzE2OTU5Nw
Thanks!

Opening Photo Files in Photo Shop CS3 after installing Snow Leopard.

After installing Snow Leopard I could only open photo files in a Preview mode. I called Adobe and Apple and could not get a solution. So I called my local Mac tech person where I got the answer to my problem. What to do: Right click on an image file icon.(Do not open image.) Then go to: Get info. In the dropdown menu, Open with: Select Adobe Photoshop CS3.app or whatever app you desire. Then click change all. You have to do this just one time for each extention such as jpg, tif, etc. Trust this helps.

Hello sean:
I am not an expert in iPhoto, but people who post here are:
http://discussions.apple.com/category.jspa?categoryID=143
To try to address the browser problem, reset Safari and see if that helps. Also, try an alternate browser (I use Firefox that way) to see if the problem is system-wide. Also, there is a Safari forum here:
http://discussions.apple.com/category.jspa?categoryID=169
Barry

After installing Snow Leopard the speech application keeps quitting

Hi everyone, I have recently installed Snow Leopard on my 06 iMac, installed all the latest updates.
I then found that when I try to set up voice activation application: system preference–speech.
The application opens for a few seconds and then unexpectedly quit. As I'm studying I use Acrobat reader
to read documents back to myself. I am not sure if it has anything to do with my machine being a 32-bit machine, and Snow Leopard
is mainly a 64-bit operating system. But I also find that the Read aloud option in the Acrobat reader does not work
and causes acrobats also unexpectedly quit.
Does anyone have any idea what is going on?
Thank you
SmileyD64

kjo04 wrote:
After installing snow leopard 10.6.8 my mail application will not open. It says you can not use this version of the application Mail with this OS X. You have Mail 3.6. What do I do? I thought everything would just automatically update... am I doing something wrong?
I suggest visiting the following Apple Support Communities Thread, your problem is similar to the one described there...
Re: Just installed snow leopard but i can't use mail b/c 3.6 version

I am unable to load webpages after installing snow leopard

I am currently typing this on my iPhone. After installing snow leopard this morning I am unable to connect to either safari or Firefox. Both come up with server errors and will not load the webpages. The Internet is still connected over wifi and I am able to both send and receive emails. I am Oma MacBook running the Internet on an at home wifi connection. Please help!

Why are you posting this in the Mountain Lion forum?

Audio capture lost after installing snow leopard

Has anyone else had problems loosing their audio capture in Premiere cs4 after installing Snow Leopard?

Just wondering, is that a plug-in for Premiere?
Similar problem with After Effects maybe?...
http://blogs.adobe.com/keyframes/2009/08/after_effects_and_snow_leopard.html

Photo Booth not working after installing Snow Leopard

unable to open Photo Booth after installing Snow Leopard. pop up saying my version is 2.03. unable to locate an update on App store. Any solution. ? Thanks to all

that answered my question. great. my wife has a macbook pro 13 inch (aluminum unibody) and she was getting frustrated with photo booth not working. i was about to uninstall but this answer fixed the issue. thanks!

S key will not shift to a cap after installing snow leopard.

s key will not shift to cap. Cap loc will work. Tried new keyboard still no go. Happened after installing snow leopard. No other keys affected.
What is going on?
Message was edited by: Mike Greener

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(48871)

Can't open any excel files after installing Snow Leopard

I can't open any excel files after installing Snow Leopard. Is anyone else having this problem?
I have a standard iWork '08 install. Has anyone experienced? And better yet, know of a fix?

Welcome to Apple Discussions
Most users who have had a problem opening Office files with the iWork apps after upgrading to Snow Leopard have the problem fixed by updating to the latest versions. For iWork '08 that is Pages 3.0.3 & Numbers 1.0.3. For iWork '09 it's Pages 4.0.2 & Numbers 2.0.2. I don't use Keynote, but it should also be updated. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

"Inkjet 4 Quit Unexpectedly" error message after installing Snow Leopard, C410 printer

Can't get printer to print after installing Snow Leopard. C410 Photosmart Premium All in One Printer. Keeps saying "Inkjet 4 Quit Unexpectedly". Wireless test says everything is fine.

If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Download and install this: support.apple.com/kb/DL907
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
Finally, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

MacBook Pro won't wake from sleep after installing Snow Leopard

If my MacBook Pro is running while closed with an external display and I unplug it from the display it goes to sleep - as indicated by the white light and the front pulsing. If I then open the MacBook the display remains blank and it is completely unresponsive to any keys or track pad input.
The only thing it responds to at that point is holding the power button down until it powers down and then restarting - loosing all work in progress at that point.
Before installing Snow Leopard the Mac would wake reliably when opened from this state.

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

After installing Snow Leopard, my external apple keyboard does not work. Any ideas?

After installing Snow Leopard (v. 10.6.3), my external Apple keyboard no longer works. Any ideas?

The laptops are called MacBooks there really is no MacPro laptop.
MacBook Pro Apple Support -
MacBook Pro specs 17-inch model
MacBook Pro

After installing snow leopard excel no longer in correct format

After installing Snow Leopard, my excel files only open in text edit and my powerpoints are scrambled or cannot be opened.
Is there a way of restoring them to at least their original form before the update or do I need to install the latest Word?

Assuming Office is still installed, you can change your Excel files so they open in Excel again. Right click on one of them. Get Info. Change "Open With" to Excel. Change All.
You didn't say if your Powerpoint files are also opening in Textedit. If so,I would expect them to be scrambled. But, then again, so should your Excel files. If they are opening in Textedit, do the same procedure as above with a Powerpoint file so it opens in Powerpoint.
You will have to do the same thing for the different vesions of Excel and Powerpoint files you might have such as XLS, XLSX, PPT and whatever other extensions Office uses. Plus I assume your Word files don't open in Word either so you have DOC and DOCX that would need to be changed to open in Word.
If none of that works, you might have to reinstall Office.

After installing Snow Leopard on MacPro with 23" HD monitor I have noticed an anomaly when scrolling up or down, a horizontal ripple appears briefly, I have tested other browsers and there is no problem, only in FF 8. What is causing this?

Similar Messages

Maybe you are looking for