After OS upgrade to 4.2.7 my slide bar get freez some times

after OS upgrade to 4.2.7 my slide bar get freez some times , when try answer incoming calls

Yes, it's happened to me too, and I'm on 4.3.2. "Slide to Unlock" or "Slide to Answer" locks up the phone when the slider reaches the right side, which is supposed to unlock the phone. No choice but to force reboot.
It's happened to me twice so far.

Similar Messages

I cant open firefox after an upgrade only box says to restart computer which i have 10 times

a box came up to upgrade firefox i did, now everytime i click on firefox icon from desktop its keeps saying "Your computer must be restarted to complete the upgrade of firefox. Do you want to restart now.
ok I HAVE DONE THIS 20 TIMES AND STILL NOTHING PLEASE HELP

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

After the upgrade, iCloud don't recognise my password to get my Mac back...

I have changed my password just in case and tested in other devices. Restarted the computer, but no. Any idea?

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Iphoto library gone after software upgrade/update..Does anyone know how to get my pictures back?

Hello, I have a Macbook Air and 3 days ago, I had a "crucial update" on my computer but accepted it before looking at what it was for. When my computer auto restarted, my iphoto library was completely gone. Does anyone know how this could have happened?
I have the OS X 10.7.5 and iphoto 9.2.3... The update that I did may have been the Os X 10.7.5 but I did not look at what the update was being quickly clicking the accept button.
Unfortunately, I do not think that my pictures were backed up on the "time machine application". Any help would be great for how I can get my pictures back.
Thank you!

You should have been syncing all of this to your computer regularly.
Just sync it back.

Phone and Contacts APP not working after the upgrade 4.01 from 4.0

Dear all
after the upgrade to 4.01 my iphone stop to operate the phone and the contacts app
when i open phone or contacts the app close(crash) after 1 sec.
When i connect to the mac i have the following message from itunes:
"iTunes could not sync to the iPhone"Christos" because contacts are being synced over-the-air."
Trying to open and change the settings at: mail, contacts, calendar but also crash
Please help
Thanks for your support

This happened to me after I upgraded to 4.0. While the iPhone update offers some great new features it has really done a number on some very basic functions and overall operation.
I am no longer able to use the contacts app to place calls. I can pull up my contact list but when I select an individual contact, the phone seems to freeze for a second and then crashes. (It might be worth mentioning that I use Exchange to sync my contacts.) While the contacts are all on the phone, I can't access actual contact information for each individual.
I'm also experiencing random freezes, touchscreen delays, etc.
I can deal with some minor bugs but not being able to use your contacts to place calls is a huge problem.

After I upgraded to Mavericks 10.9.2, calendar app won't open

I recently upgraded to Mavericks 10.9.2 on my mac. After the upgrade i cannot open my calendar. I get a message that my mac does not dsupport this app. Can anyone tell me where I can find out what kind of mac would support the calendar app. Is there something I csn do on this computer. I am on an imac 3.2 GHz Intel core i3 with 8 GB of memory.

Please use Finder to locate your Applications folder, then the Calendar app there. Control-click on the Calendar app and choose "Get Info". What version number is shown there? It should be 7.0.
If it is 7.0, click on the Calendar app you just located in the Applications folder. Does it open? If so, drag the old Calendar app off your dock (which will remove it), and drag this one from your Applications folder to the dock (which will add it there). That should solve your issue.

WD ALV Issue after the upgrade

Hi,
We have upgraded the SAP ECC 6.0 systems basis component SAP BASIS 700 from support pack 10 to 20.
After the upgrade webdynpro ABAP ALV table rows are not getting selected when we click on the rows, But it is getting selected when we we use CNTRL+Click.
I would really appreciate if you can provide me a note or route cause for this issue.
Thanks
Basava

Hi Jawahar,
Below is my suggestion regarding your query:
Edit existing Job server and update the details regarding Local reporsitory and save it.
Now try to map the same job server in scheduled jobs and check it was working or not
Or Else
Create new Job server and assign it to local repository.
In this case you have to update your all real time & batch Job configuration.
Thanks,
Daya

Unable to find valid certification path after an upgrade from 11.1.1.6 to 11.1.1.7

Hi,
I had a small composite deployed in 11.1.1.6 and after an upgrade to 11.1.1.7 I am getting
javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException:
PKIX path building failed:
sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
Does it mean that my soa composite now cannot validate the certificate of the server it is trying to connect to?
Can somebody share thoughts on how to fix it?
Thank you,
Anatoliy

Hi Robert,
Thank you much for the quick response. Not having big knowledge under my belt in this area I tried
1. Changed the keystore passphrase under my managed weblogic domain for the Demo Identity Keystore
2. ./keytool -importcert -alias avsclient -keystore /dnat8o/fmw/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/jre/lib/security/cacerts -file client_cer.cer
Was prompted with the password but entering what I did enter in step 1 didn't help. Do I have to bounce the managed server once I change the passphrase, if what I a mdoing makes sense at all, not sure
Thank you,
Anatoliy

FaceTime Camera Not Working After Yosemite Upgrade

So After I upgraded to Yosemite yesterday, my FaceTime Camera stopped working.
Every time I turned on FaceTime or Photo Booth, the green light on the camera started to blink like crazy but nothing would show up on the screen. It was just black. And I tried different user too, not working.
I tried to reinstall Yosemite, no luck.
Tried to rest SMC and PRAM, no luck.
Tried safe boot, no camera in safe mode.
Tried repair disk permission, no luck.
Here is how it showed in system report, I thought it would be more details?
I am using MBP with Retina late 2013 model. I am 90% positive that the camera was working before this upgrade.
I don't know whether anyone else encounter the same problem and I am afraid it's something I installed that's causing the problem. In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back.
Thanks!
<Image Edited By Host>

geoffreysong wrote: ... I am afraid it's something I installed that's causing the problem...
You have done the right things. With all you have tried, some third party item you have added is a very good guess as to what could be causing your trouble. The biggest difficulty will be determining which installation caused the trouble.
I am certainly not experiencing your problem on any of my 10.10 Macs.
geoffreysong wrote: ... In that case, even a clean install works fine, after I restore everything from Time Machine, the problem might just come back...
Right again! The way to prevent reinstalling the problem (and to prove your guess was correct) is to reinstall OS X using the OS X Yosemite: Erase and reinstall OS X instructions.
Next, before adding anything else, test your camera using the applicable suggestions from Apple's How to Troubleshoot iSight article. (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
• If the camera works now, your suspicion is correct. You can then add ONE needed app FROM ITS ORIGINAL SOURCE (not from any of your backups) and test the camera again. If the camera fails, you have found the problem app. If the camera works, continue adding apps one at a time, testing thoroughly between each addition. After all your apps are added back, if your camera continues to work correctly, you can copy your data files back from your latest backup.
• If the camera doesn't work immediately when nothing has been added to your fresh Mac OS X installation, you most likely have a hardware problem. There are no user serviceable parts of the camera. Contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.10.1

After I upgrade lion to Mavericks, App Store stopped working, any idea how to fix this?

After I upgraded OS lion to Mavericks, in app store I had some new updates, then after a system update, which require restart, then App Store, stopped working, any one can tell me what should I do to fix this problem?

Guys just contact apple support team . They will guide you well and your problem will most probably be resolved. I contacted them and following their instructions my mac is working totally fine again. If at all the problem persist the re-install mavericks by following steps
1). Switch of mac
2). Hold option/alt key and then switch it on.
3). Then choose your language and continue.
4). Now Re-Install OS X .
5). It will start downloading and installing.
6). Leave it idle for the required amount of time.
7). It will restart automatically and your problem will be definitely resolved.
Note:
a. If there is any problem of connection follow the same steps and the downloading will start where it stopped.

Performance degrades in Probook 4540s after memory upgrade

Hello. I've installed recently in my Probook4540 two Kingston memory modules (2x8gb ddr3 1600 CL10 240 pin). Ever since I did this, Windows 8 takes much longer to boot and performance has significantly dropped. But, if I only place one of the two modules, or the original 4GB module, Windows runs at normal speed.
I think it's a BIOS problem, as I've just seen this very same error in other brand's laptops, for example here
http://superuser.com/questions/379970/laptop-is-incredibly-slow-after-ram-upgrade
I've got the latest available BIOS version installed (F31 26-SEP-2012).
Thank you.
This question was solved.
View Solution.

I actually started a case under their Business division. I first received the generic/automated response from HP saying that the laptop can only take 8GB of RAM max. They actually sent me a link to an official HP 4540s specs and it actually shows 8GB max. BUT, I never saw that PDF but used the one linked on their shopping site under business section and it shows maximum of 16GB of RAM. I explained all of this to a supervisor and they decided to escalate the issue to Level 2. I'm still waiting for a final decision. I'm worried they are going to try to replace the motherboard. I truly believe this is a BIOS update issue. Like I said the 4540s i3 we have can take the 16GB of RAM with no performance decrease. Only the i7 one is slowing down to a crawl. No error messages anywhere.

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

Hi support team, I'm using iphone4, After i upgraded my ios7 i'm facing issues.Need ur help

Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
- Unable to view the incoming calls.
- mobile hanging

This is not the "support team". These are user to user forums. You are not addresssing Apple's "support team" by posting here.
Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried? Have you tried a reset?

Spotlight Indexing, Systemstats, Missing File, All After Mavericks Upgrade

Dear Mac Support Communities,
The upgrade to OS X 10.9.4 has crippled my computer.
My main question is: should I reformat, or should I wait for a patch to come out to solve whatever is wrong with Mavericks? I explain below.
Spotlight is constantly indexing. The mdworker is all over the place on the Activity Monitor—4% and then it explodes to 85% of CPU usage. Systemstats kicks in randomly (connected to spotlight perhaps?) and eats up 90% of my CPU and 3gigs of RAM. Time Machine takes AGES to backup.
I have not been able to stop Spotlight's endless indexing. I have moved my hard drive and my Time Machine backup into the 'private' filter in 'Spotlight Preferences.' I have also tried the "sudo mdutil -a -i off" trick to stop indexing altogether. But Spotlight Indexing goes "off" and then automatically turns "on" in Terminal. Spotlight carries on, and the computer performance is choppy.
I've run disk repair. First, I repaired permissions. Then I verified and attempted to repair the the hard drive. There is a missing file apparently, and I therefore must reformat. This is very first issue I've ever had with the hard drive since I bought the computer. Considering how awful Mavericks has been—I have been reading other Support Communities posts—I'm nervous about something going wrong, or that all these problems will persist after the reformat.
All of this has occurred three days after my upgrade to to OS X 10.9.4. I have heard of numerous people having problems with Mavericks. All similar problems concerning missing files, haywire spotlight, systemstats devouring any remaining CPU power and memory space, and slow Time Machine back-ups.
Anyone with the same problems? Care to theorize some solutions?
I have a late 2008, 15inch MacBook Pro., 2.53 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, running OS X 10.9.4 (13E28).
Cheers! I appreciate the help.

Older Macs have more troubles under Mavericks. Considering the age of your Mac, it's not uncommon to start have hardware issues like drive failure.
To repair the drive you must boot from the Recovery Drive.
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.***
Next Reset Home Directory Permissions and ACLs following directions here This will serve two purposes. It will reset YOUR permissions. Not the same as Disk Utility reset permissions and it will cause Spotlight to re-index your drive when restarting.
Restart
Download and run the combo updater to refresh your OS X files.
OS X Mavericks 10.9.4 Update (Combo)
http://support.apple.com/kb/DL1755
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.
***If Disk Utility is unable to repair you will have to copy your data to an external drive first. Reformatting will erase the drive. You should have a backup regardless, if your data is important to you. Just like a seat belt and an air bag protect you in different ways when driving, you need both Time Machine and a clone for full protection. If you don't have an external drive for backup, I can give you some suggestions to get you started.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

After OS upgrade to 4.2.7 my slide bar get freez some times

Similar Messages

Maybe you are looking for