After OTA on 5 C are Images mixed up, what could i do?

Hi there,
i made that OTA Update but after i check my wife's iPhone 5 C, i found a big in images, all are mixed up, latest Images are gone....someone fix that problem?

Dick Spartugus wrote:
I haven't, but I will. I would need to back up my information before reinstalling the OS in recovery mode, correct? I've never done it before..
Incorrect but it's smart to backup, I'd recommend backing up to Time Machine and also use a seperate EHD and create a bootable clone using SuperDuper or Carbon Copy Cloner.

Similar Messages

  • Last seconds of uploaded podcast are cut off! What could be the problem here?

    Hello!
    we uploaded some podcasts in our itunes store account. We produced them by ourselves and they are also online on our website (futurzwei.org). The source is the same Content Management System (Joomla). At the website, the podcasts are complete. In the itunes store, the same podcasts are incomplete. The last seconds are cut off!
    How can this be, when the original is complete?
    I don't know where the problem could be.
    Can it be a problem of the transfering mode?
    Is it a problem of the Content Management System we use? Or any special setting we could have set wrongly in there?
    Of the format the podcasts have (normal mp3)?
    Thank you very much for any help!

    See if you qualify for this program:
    http://support.apple.com/kb/TS2377

  • I am trying to load "The Sims" for OS X 10.1 and higher;  first time the game would lock up after the preview, now I can't even get the installer to load after sending the original installation to the trash.  What could I be doing wrong??

    I have "The Sims" suite (The Sims, Livin Large, House Party, Hot Date, and Unleashed). During the original installation, I could not get teh third disk to install (House Party).  I definitely installed them in the correct order.  Then, I went on to load the last two CDs, but when I install the last CD, to begin play, the game locks my system downafter the preview. 
    I sent the entire Application to the trash (I'm assuming installing this in the Applications section of teh HD is correct), and tried to re-install.  Now, the initial Installer on The Sims primary CD will not respond.  I have to force quit to unlock the install.
    I have an iMac with the 3.06 GHz Intel Core 2 Duo, with 4 GB Memory (4 GB 1067 MHz DDR3).
    Can you tell me if I'm doing something wrong, or if my system does not have enough memory to handle this program?  I already have The Sims 2 and 3 with several expansion packs installed - never had a problem operating or installing them. I still have at least 50% of my internal memory available.
    Thanks,
    Joe

    For some reason SpeedGrade updated through the Application manager. I tried downloading the updates from adobe's website but it won't install. Prelude's update fails before it can even get started whereas the extension manager does install but it doesn't seem to be updating.
    I've done as much investigation as I can think of and I'd rather not create a new user just to check that out but if I have to I will. How exactly do I create a new user on a mac?

  • After Saving Workbook Text Elements are All Blank

    I created a query, made some adjustments in Analyzer and saved the workbook.  Upon going back into my workbook, all my text elements were blank and when I open them, the constants and filter values are all unchecked.  What could have caused these to be removed.  All the structures are still there.
    Thanks,
    Cherie

    Hi Cherie,
    The problem is strange.
    But try executing the workbook again.
    Once executed, edit the query and save and execute again.
    Again save the workbook.
    This is just trying again.
    Hope it helps.
    regards,
    Lax

  • I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts)

    I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts).  I dont know how to repair this.  what a nightmare

    An icloud account is designed to be used by just one user.  If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
    If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something .plist  remove them too.
    then try again.
    And if that still does not help, remove the Aperture preferences as well:
    ~/Library/Preferences/aperture.plist
    Regards
    Léonie
    P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
    You can reveal it also  from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

  • Why are images on page blinking after the OSX 10.9.3 update

    Why are images on page blinking after OSX 10.9.3 update on 5/21/14?

    I have finally been able to get the strobe effect stopped.  I've restarted at least 7 times and each time I got the light grey screen with the darker grey apple and the spinning wheel, but not the log in box I used to get before the 5/21/14 update.  But I called my son and he did some research and told me to hold down the Shift key and type in my password, even if it didn't appear in the log in box.  It worked and the log in box appeared and I was able to type in my password.  After doing this for each of the 7 times, on my last attempt it appears the strobe effect has been weeded out.  Thank God - I thought I was going blind with it affecting every screen I was on.
    I hope this will be of help to someone.

  • When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session.

    When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session. However, after several hours and opening and closings of Firefox, it will open tabs from the old session, for no apparent reason.

    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Multiple_profile_files_created
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
    In case you are using "Clear history when Firefox closes":
    *do not clear the Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

  • I created a slideshow but all the photos are now mixed up. i just dragged the event to a new slideshow. how can i get them into the same order they were imported in?

    my slides are all mixed up after i imported them into a new slideshow. i just copied them from the events and dragged the icon to the new slideshow but the have re arranged themselves into a random order. I want them to play in the order i took them and copied them . How can i do this please. am working with iOS 7 on my iMac using iPhoto latest version.

    Processor  2,8 GHz Intel Core i54, GB 1333 MHz DDR3,ATI Radeon HD 5750 1024 MB,OSX 10.9.5 (13F34), im using iphoto version 9.5.1. which has been updated.. im using iOS  mavericks iMac
    Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core
      Processor Speed: 2,8 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 8 MB
      Memory: 4 GB
      Processor In

  • Win 8.1 Metro apps re-installing after being removed from the reference image

    Scenario:
    MDT 2013 - Build reference image for Win 8.1 on hyper-v executing the following commands removing all metro apps.
    Powershell.exe -Command "&{Get-appxPackage -AllUsers | Remove-AppxPackage -ErrorAction SilentlyContinue}"Powershell.exe -Command "&{Get-AppXProvisionedPackage -online | Remove-AppxProvisionedPackage -online -ErrorAction SilentlyContinue}"
    Install windows updates and perform sysprep and capture wim task
    Import Wim into Sccm 2012 r2 and deploy with standard mdt task
    Problem:
    After deployment all Metro apps are reinstalled or reinstalling.
    Notes:  Setting Copyprofile True is ignored and have tried various methods and it is always ignored.
    If I use the wim from sources\install.wim and I either dism /remove-appx... or powershell in win PE get-appx -path | Remove-appx...
    If that wim is modified and used then it deploys without the Metro apps but it doesnt have any windows updates.  If I use that wim to build the reference image it will have no metro apps but after capture and deploy through sccm the metro apps start
    to re-install.
    Below is the unattend.xml
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
    <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Display>
    <ColorDepth>16</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <ComplianceCheck>
    <DisplayReport>OnError</DisplayReport>
    </ComplianceCheck>
    <UserData>
    <AcceptEula>true</AcceptEula>
    <ProductKey>
    <Key></Key>
    </ProductKey>
    </UserData>
    </component>
    <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
    </SetupUILanguage>
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="generalize">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    </component>
    </settings>
    <settings pass="specialize">
    <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <Identification>
    <Credentials>
    <Username></Username>
    <Domain></Domain>
    <Password></Password>
    </Credentials>
    <JoinDomain></JoinDomain>
    <JoinWorkgroup></JoinWorkgroup>
    <MachineObjectOU></MachineObjectOU>
    </Identification>
    </component>
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <ComputerName></ComputerName>
    <ProductKey></ProductKey>
    <RegisteredOrganization></RegisteredOrganization>
    <RegisteredOwner></RegisteredOwner>
    <DoNotCleanTaskBar>true</DoNotCleanTaskBar>
    <TimeZone>Pacific Standard Time</TimeZone>
    <CopyProfile>true</CopyProfile>
    </component>
    <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Home_Page>http://www.microsoft.com/</Home_Page>
    <DisableWelcomePage>true</DisableWelcomePage>
    <DisableFirstRunWizard>false</DisableFirstRunWizard>
    </component>
    <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <RunSynchronous>
    <RunSynchronousCommand wcm:action="add">
    <Description>EnableAdmin</Description>
    <Order>1</Order>
    <Path>cmd /c net user Administrator /active:yes</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>UnfilterAdministratorToken</Description>
    <Order>2</Order>
    <Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
    </RunSynchronousCommand>
    <RunSynchronousCommand wcm:action="add">
    <Description>disable user account page</Description>
    <Order>3</Order>
    <Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
    </RunSynchronousCommand>
    </RunSynchronous>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    <component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TapiConfigured>0</TapiConfigured>
    <TapiUnattendLocation>
    <AreaCode>""</AreaCode>
    <CountryOrRegion>1</CountryOrRegion>
    <LongDistanceAccess>9</LongDistanceAccess>
    <OutsideAccess>9</OutsideAccess>
    <PulseOrToneDialing>1</PulseOrToneDialing>
    <DisableCallWaiting>""</DisableCallWaiting>
    <InternationalCarrierCode>""</InternationalCarrierCode>
    <LongDistanceCarrierCode>""</LongDistanceCarrierCode>
    <Name>Default</Name>
    </TapiUnattendLocation>
    </component>
    <component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DisableSR>1</DisableSR>
    </component>
    </settings>
    <settings pass="oobeSystem">
    <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
    <UserAccounts>
    <AdministratorPassword>
    <Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    </UserAccounts>
    <AutoLogon>
    <Enabled>true</Enabled>
    <Username>Administrator</Username>
    <Domain>.</Domain>
    <Password>
    <Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
    <PlainText>false</PlainText>
    </Password>
    <LogonCount>999</LogonCount>
    </AutoLogon>
    <Display>
    <ColorDepth>32</ColorDepth>
    <HorizontalResolution>1024</HorizontalResolution>
    <RefreshRate>60</RefreshRate>
    <VerticalResolution>768</VerticalResolution>
    </Display>
    <FirstLogonCommands>
    <SynchronousCommand wcm:action="add">
    <CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
    <Description>Lite Touch new OS</Description>
    <Order>1</Order>
    </SynchronousCommand>
    </FirstLogonCommands>
    <OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    </OOBE>
    <RegisteredOrganization></RegisteredOrganization>
    <RegisteredOwner></RegisteredOwner>
    <TimeZone></TimeZone>
    </component>
    <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <InputLocale>0409:00000409</InputLocale>
    <SystemLocale>en-US</SystemLocale>
    <UILanguage>en-US</UILanguage>
    <UserLocale>en-US</UserLocale>
    </component>
    </settings>
    <settings pass="offlineServicing">
    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <DriverPaths>
    <PathAndCredentials wcm:keyValue="1" wcm:action="add">
    <Path>\Drivers</Path>
    </PathAndCredentials>
    </DriverPaths>
    </component>
    </settings>
    <cpi:offlineImage cpi:source="catalog://sccm1/deploymentshare$/operating systems/windows 8.1 enterprise x64.1/sources/install_windows 8.1 enterprise.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>

    Yes as I've removed it both via get-appxpackages | Remove-appxpackages and via the dism commands.
    I have found also that wasn't getting a good sysprep.  Problems with copy profile lead me to try doing a manual sysprep where I found I was getting failures in my sysprep. The problem was that I was disabling the windows store service in my reference
    image.  
    I was very hopeful that was going to be the resolution but it appears that is not the case.
    2014-09-26 07:15:03, Error SYSPRP WSLicenseCleanUpState failed with hr=c0020017
    2014-09-26 07:15:03, Error [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'WSLicenseCleanUpState' from C:\Windows\System32\wsclient.dll; dwRet = 0xc0020017
    2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0xc0020017
    2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0xc0020017
    2014-09-26 07:15:03, Error SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0xc0020017
    2014-09-26 07:15:03, Error SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0xc0020017
    2014-09-26 07:15:03, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0xc0020017
    2014-09-26 07:15:03, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0xc0020017

  • Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns.

    Cannot auto size columns in iTunes 10.4.  Columns are all mixed up with headings I have never seen. Cannot change by right clicking on columns. Cannot order albums alphabetically by double clicking on heading.

    Very many thanks to you, Putaro!  Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
    You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
    But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
    I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
    I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
    If you've got Jax installed, consider removing it before updating to iTunes 10.4.
    My iTunes is now working right as rain, thanks again to Putaro!
    -Jon

  • After Effects FFX File Presets and Image thumbnails

    This is a sample piece of code from an effects preset for a text ffx for After effects. The "<xapGImg:image>/" from below is referring to a local url. but it seems to be encrypted or something. Is there a way to make image thumbnails for my ffx files so that the thumbnail can be viewed in bridge. Been looking for the answer but nothing.<br /><br />thanks for helping<br /><br /><?xpacket begin="" id="W5M0MpCehiHzreSzNTczkc9d"?><br /><x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="3.1.1-112"><br />   <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"><br />      <rdf:Description rdf:about=""<br />            xmlns:xap="http://ns.adobe.com/xap/1.0/"<br />            xmlns:xapGImg="http://ns.adobe.com/xap/1.0/g/img/"><br />         <xap:CreatorTool>After Effects 7.0</xap:CreatorTool><br />         <xap:Thumbnails><br />            <rdf:Alt><br />               <rdf:li rdf:parseType="Resource"><br />                  <xapGImg:height>162</xapGImg:height><br />                  <xapGImg:width>216</xapGImg:width><br />                  <xapGImg:format>JPEG</xapGImg:format><br />                  <xapGImg:image>/9j/4AAQSkZJRgABAgEASABIAAD/7gAOQWRvYmUAZMAAAAAB/9sAhAAKBwcHCAcKCAgKDwoICg 8S&#xA;DQoKDRIUEBASEBAUFA8RERERDxQUFxgaGBcUHx8hIR8fLSwsLC0yMjIyMjIyMjIyAQsKCgsMCw4M&#xA;DA 4SDg4OEhQODg4OFBgRERIRERggFxQUFBQXIBweGhoaHhwiIiAgIiIrKykrKzIyMjIyMjIyMjL/&#xA;wAARCACiANg DASIAAhEBAxEB/8QBogAAAAcBAQEBAQAAAAAAAAAABAUDAgYBAAcICQoLAQACAgMB&#xA;AQEBAQAAAAAAAAABAAID BAUGBwgJCgsQAAIBAwMCBAIGBwMEAgYCcwECAxEEAAUhEjFBUQYTYSJx&#xA;gRQykaEHFbFCI8FS0eEzFmLwJHKC8 SVDNFOSorJjc8I1RCeTo7M2F1RkdMPS4ggmgwkKGBmElEVG&#xA;pLRW01UoGvLj88TU5PRldYWVpbXF1eX1ZnaGlq a2xtbm9jdHV2d3h5ent8fX5/c4SFhoeIiYqLjI&#xA;2Oj4KTlJWWl5iZmpucnZ6fkqOkpaanqKmqq6ytrq+hEAAgI BAgMFBQQFBgQIAwNtAQACEQMEIRIx&#xA;QQVRE2EiBnGBkTKhsfAUwdHhI0IVUmJy8TMkNEOCFpJTJaJjssIHc9I1 4kSDF1STCAkKGBkmNkUa&#xA;J2R0VTfyo7PDKCnT4/OElKS0xNTk9GV1hZWltcXV5fVGVmZ2hpamtsbW5vZHV2d3h 5ent8fX5/c4&#xA;SFhoeIiYqLjI2Oj4OUlZaXmJmam5ydnp+So6SlpqeoqaqrrK2ur6/9oADAMBAAIRAxEAPwDjOb Nm&#xA;xV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2b&#xA;Nm xV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV&#xA;2bNmxV2bNmx V2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNm&#xA;xV2bNmxV2bNmxV2bNmxV 2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2bNmxV2b&#xA;NmxV2bNmxV2bNmxV2bNmxV2bNmxV2 bNmxVmX5Z+TbPzZrE9rfPIlrbwmVmhIVq8gqirK3jhr5t8s&#xA;flppelXb6Vq0tzq0JCR2xlRvi5cWqFjHT55JPy IsCmk6zqPIRtI628UrdFKKXav/AAa5FNb/ACyn&#xA;ttf0zTYNTivrjV5ZCxiWnpIhVndvib+bFXn+bPQGjWXk7Sv NUHkvT9GgvZo4Wl1LUblVkdSE5ADm&#xA;rddq0oBXI9a+TNI8yfmTrBa3S30DSConhgURo7gUCDhSgPEs1P44qxT8 rPKlj5m8wS22pIzWMFu0&#xA;rhTxJbkqIK/Scj3mW3sbXX9QttPUrZwTvFCpPI0Q8evzGd98n+YdBu7DXL7SdJg07 T9M5QpcxKqt&#xA;MkaFyzcVG3fqchHkvy7pVn5cu/PWv2R1OeV2axsCvMOzPxHwUIYsx7g0HbFXk2SDyN5eh8x+Zb TS&#xA;rguttLyadoyAwRVJ2JB70ydfmzpGkDy5pGuRaamj6ndECWzRVQ0K8irKoUVXxpXA35D2HreYb2+I&#xA;2t rfip95Gp/DFUtl8i6RJ+Zg8qWkkx0+MqLiRmUyf3YkejBabVA6YRefdD03QPM91pGmvJJb2qxh&#xA;mlIZubosjbq q9OWdB/LD/cz+ZGv64fiRWnaJvaWTig/4DFfINlpnmHzZ5t1vU7eG6s1kYIZ41lVA&#xA;zsVYBwRUJHirxfNnd9Os vJXmTyPrX6O0iO1hsHmiiuGVTMzRosqzeoBy35dK5xXRtKudY1S10y2F&#xA;ZrqRY1PYVO5PyxVBZs75pmneUNA8z ad5Ms9Ih1G/mjMuo39yquUCo0mwdW3anQUHTAGn6Jomo/nD&#xA;fWyafbfo3TrUmS29JPRMtFj3j48a1evTFXiWbP RPly18jarqmv6PZ6HB6Nm3Ge7dEYO78ldYxx/d&#xA;hKbccgn5eeTdDnXVfM2tL6uh6Y0n1eJt1k9Orcm/moKbdzi qG/KzyZo3mC31S+1pHa1slXjwbhQ0&#xA;LsfuGc8l4eq/AcU5HiOtBXYZ6B/xHZXH5YavrdlpkOkxzpLDFDCFHJSf RVzwRN/iOefMVdmzZsVd&#xA;mzZsVdmzZsVdmzZsVdmzZsVez2X+4T8jJJfsS6jzY+NZpfTU/wDAIMjH5KPbr52i9 YgOYJRDX+Yj&#xA;oPorkIk1PUZbVbOW6le0SnCBnYxinSik02xGGaaCVZoHaKVDVJEJVgR3BGKvovyz5Ym0nzr5g1 vU&#xA;Zo2ub0O9jCrcn+rcwzyMP2d+Kj6cJvyykOq6P5thgkUandXUxBJoQsicYifbkDnGDrutG4kujf3H&#xA;1m VeEk3qvzZR+yzVqRiNpqF/ZTGezuZbecggyROyMQeu6kYq9qbSZPJ35Q6vbzSo99NyiufSbkqv&#xA;O6QFOXiqtvh t5ZvtZuvyz08+UXt21S3URSRz7gcS3NfANuCK7ZwB9T1GS2a1e6la2ZubQl2KFieX&#xA;IrWla5djqup6cWawu5rU vsxhkaOo9+JGKsk/MUeck1SBPNlwJrto+cMcZHBFJpQKiqoPyya/kU8E&#xA;llrlkkojv5Qpir1C8WXlT2Y5yG5u7 q7lM11M88x6ySMWY/S2VBcT20olt5GilX7LoSrD6Rir3HRN&#xA;If8ALP

    The XMP packet looks OK--the thumbnail is base64 encoded as it should be.
    You'll have a better chance of a response if you post your question on the After Effects forum--readers there are more likely to be familiar with After Effects and Bridge.
    Don't post the XMP packet text--just that you can't see After Effects thumbnails in Bridge.

  • After Effects--Composition not using entire image frame??

    Hello,
    I'm very new to After Effects so I'm sorry if this is a very simple question. I've Googled it and I think maybe I'm using incorrect terminology because I haven't found anything that describes what is happening. So, I've taken a screen shot to hopefully help illustrate my issue.
    I'm using After Effects CC - 2014.1 Release on a Late 2013 Mac Pro. Trying to piece together an animation render from Autodesk Maya.
    Right now I'm using a test render so that I can figure out the import settings for when the final one is finished rendering. In this test there are 94 images, each intended to be one "frame" in a 24 frames per second animation. I think I have altered these settings correctly as it seems to be about the correct length (94 "frames" / 24 fps = 3.9167 or 3:55 seconds)
    The problem I'm running into is that After Effects is only showing a small viewport of the actual images. I've outlined in the bright green dashed line the approximate actual image size and where in the image it is showing in After Effects. All of the images are the same size and same resolution, and they are all being shown only in this small window.
    How can I change the settings to have the final animation show the entirety of the frame? Obviously it's showing such a small area that it won't work for me-- I really need all of that missing information shown.
    Thanks for any help anyone can offer.

    What size movie does Maya expect? If it's conventional HD, 1920x1080, you must scale your images to fit the comp size. If you need a comp that is 4k you must change the properties of the comp. they are both easy to do but require a bit experience with the AE interface. Start at the beginning of the basic tutorials that we refer to around here.
    and welcome to the family. AE is hard. Really hard.

  • After reinstall not all apps are installed

    Hi!
    I've had the problem that my iPhone 3G freezed and the restart only shows the apple logo. So I started it in recovery mode, reinstalled iPhone, activated it and my computer and synced one time. All contacts, calenders and all settings were restored - wonderful!!!
    But not all apps have been installed. But why? All apps are lying in the directory where the others are lying which were installed. After another sync nothing more happened. Then I double clicked an app-file directly and then it showed up in iTunes under Programs. After another sync some programs are installed on iPhone but not all.
    So is this normal? How could I install all my apps?
    Is it possible to download apps which I didn't synchronized before restore, because iTunes says there are no downloads available.
    Thanks for help in advance!!
    Greetings
    Udo

    As far as I know you shouldn't have ANY TROUBLES with the NATIVE APPS...you know like Safari, Calendar, Photos...etc. However, the apps that you download from the app store, I believe, need to be re-installed manually. This is what I have to do with my original iPhone with 2.0 software anyway. I would think that it is the same with the 3G.

Maybe you are looking for