After Printing field updation

hi all
here is my question .
I want to update one field say status from N to A using report 6i
after seeing report preview and only when i gave it to for printing .
The status should be updated only when i click on 'print' button .
pl tell me how to do it
thanks and regds
Sanjay

Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? 
Most likely whatever program you are using to print the forms is treating the text as a grapphic and the printer is making black by mixing cyan, magenta and yellow.  If your text is priting as red it would indicate that you are likely low on cyan ink.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • HP Laserjet 3055 printer "waiting for printer to be available" after HP Printer Software Update 3.0

    I have an HP Laserjet 3055 All-in-One Printer. It has been printing just fine from my iMac running OS 10.9.5 (Mavericks) until after the HP Printer Software Update, Version 3.0, that I installed on 1 Oct 2014. Although the 3055 is shown as connected/idle to my iMac via USB, after clicking "PRINT" for a document, the print queue status soon changes from "printing" to "waiting for printer to become available", and the printer never becomes available. I have tried rebooting everything (printer, computer, text software), checking USB cable connections and changing USB ports, deleting and re-adding the 3055 printer (numerous times!) even after resetting the print system, but could there be something inherently wrong with the latest HP driver (version 19.9 for HP Laserjet 3052)? Or is it possible something else is going on?  In other words, I have exhausted all the solutions I've found in these and other forums to no avail.
    I have tested this printer by connecting it to my MacBook Pro (also running OX 10.9.5) but without having installed the HP Printer Software Update, Version 3.0. (Hadn't gotten around to this update...) The printer works fine, even though the driver has the same version number--19.9 for HP Laserjet 3052. So could the version 19.9 driver in the latest HP Printer Software Update be corrupted? Is there any way to reinstall that driver? Or copy the 19.9 driver from my MacBook Pro and install it on the iMac? HP only refers to the Apple Software Update process for Mavericks compatible drivers for this printer. Can I manually uninstall the HP driver for the Laserjet 3055 from my iMac and then have the iMac download the driver again in the process of re-setting up the 3055? Any suggestions appreciated.

    Many thanks for your suggestions. After creating a bootable back-up, I tried the first suggestion--downloading and re-installing the HP printer driver update kit for which you kindly provided the link--but to no avail. Before downloading the driver update kit, I "reset the printing system", clearing all the installed printers, queues, etc. After re-installing the HP printer drivers, I went to System Preferences>Printers & Scanners to once again add the HP LaserJet 3055 only to discover it was already listed as installed! This I find baffling, to say then least. I tried printing and again got the "waiting for printer to be available" message. I subsequently tried deleting and re-adding the printer, going through the printing system reset again, but still no-go.
    I also tried another approach to adding the printer which perhaps will shed some light on the problem. After clicking on the "+" button to add the printer, I select the "HP LaserJet 3055" which shows up as available via USB. Then, instead of using the "HP LaserJet 3052" driver that automatically appears in the "Use" [choose a driver] field, I chose "Auto Select" to see what happens. As the computer processes this request, the status message changes from "Gathering printer information..." to "Waiting for printer to become available..." And, of course, it never becomes available. This strikes me as odd, that the printer set-up system "sees" the printer accurately enough to list it as available to add but can't find it with the "Auto Select" approach to getting the appropriate driver. Of course, when I simply go with the "Use HP LaserJet 3052" driver option that, naturally enough, is the one automatically suggested by the printer set-up system, the printer is "successfully" added. I say "successfully" in quotes because it never becomes "available" to print something.
    Before I try your second suggestion--downloading and re-installing the 10.9.5 combo update--I wonder if it's possible that the printing system reset process is "broken". It's as though the reset fails to clear the printer queue, making it appear that there is a pending printing job that the system is waiting to be finished. Also, as noted above, I reset the printing system prior to re-installing the HP printer driver update kit and then, after installation, the HP LaserJet 3055 magically had already been added. This makes me wonder if the printer wasn't properly "cleared" from whatever makes up the printer System Preference process during the reset.
    Any other thoughts?

  • After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

    After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
    This is the message from Epson:
    The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

    After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
    This is the message from Epson:
    The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

  • After a recent update I cannot print to my wireless printer

    I cannot AirPrint from my iPad after a recent update. Any suggestions?

    Power-cycle your router.
    If that does not work, repeat it, but power-cycle the printer and iPad too.

  • After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF

    That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.

    thanks...figured out my problem!
    Date: Wed, 3 Feb 2010 12:24:29 -0700
    From: [email protected]
    To: [email protected]
    Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
    What happens if you try to print to the Adobe PDF printer?
    >

  • Printing problems after installing Security Update 2015-002

    After installing Security Update 2015-002 on three separate computers on two different WiFi networks, printers on the network are losing their connections to the computers that can print to them. We have experienced this on a network running a Canon printer and an HP printer - both have disappeared on the network although the printer suggests it is still connected to the network. The same thing has happened on a separate network I manage with a single HP printer on that network. I have tried removing the printers, resetting the printers etc. Nothing is working. I can get one print out of a printer when I turn the printer off and then on. Three minutes later the printer is no longer connected to the computer - although still connected to the network. Please Help.

    I think I have figured out that it is in fact the Apple Extreme Base Station that is losing the printer. It is very odd because the printer is connected to the Wifi. My computer is connected to the WiFi and connecting to the internet. The Router for the internet can see the printer. An Apple Extreme is then connected via a network cable in Bridge mode to the router. When I turned the power off the The Apple Extreme and then restored power it all worked. was still working this morning, but again this afternoon I needed to reboot Apple Extreme. It is quite strange that this is happening on two different Networks in different parts of the country at the same time. Maybe the Security Update is somehow affecting/blocking communication with the printer? I just don't know enough. These networks have been up and running with the same printers and computers for years with zero problems - all of a sudden we have the same problem on both Networks.
    Any help will be very much appreciated.

  • After the latest update printing off the web has moved from readable to font size 6. How to I get back to font size 10 or 12? hp psc 2210 all-in-one?

    When I print coupons or e-mail from my hp psc 2210 all-in-one the font has changed to 6 where before it was size 10 or 12. I have made no changes in my printer settings nor any other changes that I am aware of. This happened after the latest update of Firefox.

    I have a carriage jam on my HP Officejet 5510 which I cannot correct.. I have tried everything I know to do. There are two black pieces that will not spring down when the cartridges travel across. I th en get a carriage jam message.
    Do these pieces need lubricated?
    How can I get t hem to go down when the carriage goes across?
    Thanks for any information or help options
    Karol

  • How can I get my printer to work after a Yosemite update?

    How can I get my printer to work after a Yosemite update?

    Hi there michaelfromepsom,
    You may find the printer troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X 
    -Griff W.  

  • After an automatic update yesterday, I can only print email (Outlook Express 6) headers but the messages do not print

    After an automatic update yesterday, I started having problems printing emails from Outlook Express 6. The headers (e.g. To, From, Subject) print, but the messages do not print.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

    After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
    could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

    Hi,
    à
    Removal of the patch resolved the issue.
    Thanks for sharing in the forum. Your time and efforts are highly appreciated.
    On current situation, would you please let me confirm something more?
    Please check if this update rollup package (KB2995388) install successfully.
    Please run sfc /scannow command to scan all protected system files after installed this update.
    If be possible, please re-install Print Server feature on the server after installed this update. Any find?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • HP7160 photo printer stopped working after 8.1 update. Just stays in queue

    I do not know what bit it is.  I have a pavilion 20 HP all in one.   It seems after the latest update nothing is working.  application and printer. 

    Hello @dlw0321 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues printing since updating to 8.1.  I would like to help!
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • After your last update, the print font in my email is too small

    THE PRINT SIZE IN MY EMAIL SHRUNK AFTER YOUR LAST UPDATE
    == after your last update

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    * NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/

  • Pavilion g7 cannot install printer after 8.1 update.

    After 8.1 update I could not print to my Office jet 6500.  Tried re-installing and even with direct connection with USB cable could not install.  Bought a Laserjet P1102w.  It will not install.  I have been through every possible suggested solution on HP and MS support and forum pages, updated drivers, downloaded installation software, etc....  No luck.  HP says the model is compatible with 8.1.  I'm thinking it is not and I need to reinstall 8.
    Any other suggestions?

    Hi jimbois,
    Sorry that didn't help.
    The PNP are the plug and play for USB devices. That could be causing this issue.
    Check the Device Manager for any unknown or other devices, especially on the USB hubs under Universal Drivers.
    You would have to right click and update it or possibly right click remove and restart the computer, to get them to install properly. Also look for the printer entry, mass storage device and remove it. You can include a screen shot if you like.
    Run your Windows Updates if you haven't yet.
    Disconnect the USB cable.
    Then right click on the downloaded driver and Run as Administrator to try and install the printer again. Don't connect the USB cable until prompted. Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable shouldn't be longer then 6 feet. Try another USB cable if the printer isn't being detected or another USB port on the computer.
    Let me know which printer we are trying to install right now please.
    If you are still having issues, let me know how the is listed in the Device Manager window.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc.  Anybody at Apple listening?

    I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold,  etc.  Anybody at Apple listening?  Anybody else out there having these kinds of problems?

    10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
    * and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
    Shame on you Apple.
    Message was edited by: Sjazbec

  • PSI - Budget Field is not getting after running Process Update Summary Bal

    Hi,
    I have a project with Budget being created through Financial Plan types. After Baselining the budget and performing Actual Transactions, i run Process 'PRC: Update Project Summary Amounts for a Single Project' and 'PRC: Update Project Summary Amounts'. System updates Project Status Inquiry - PSI with Actual Transactions but Budget field is getting updated and it keeps on showing as Zero Budget.
    Whereas when i create project with Budget Entry Method and not through Financial Plan Types, PSI is correctly updated after running these processes. Is PSI budget field intended for Budget Entry from Application Based Forms Only or there is something else i need to do get the PSI Bidger field updated.
    Thoughts on this would be highly appreciable.
    Zeeshan

    Hi Dina
    Thanks for your reply, please confirm what i have to do in order to populate the data to PSI from Financial Plan.
    Zeeshan

Maybe you are looking for