After R12 Upgrade: No records in many of the tables.

Hi all,
After R12 upgrade, we found there are no records in many tables. For example AR_BATCHES_V.
What could be the probable causes?
Also, note that there are still some concurrent requests running.
DQM Parallel Sync Index Child Program2 (DQM Parallel Sync Index Child Program)
Synchronize Workflow LOCAL tables (Report Set)
Process Benefits Data Conversion
S. Sundar

Hi,
I'm a bit late to the party in this thread, but:
Are most of the unpopulated tables related to Financials? With the introduction of E-Business Tax (ZX) and Sub-Ledger Accounting in R12, some data seems to have been moved to other tables and schemas. For example, we had some reports that needed to be rewritten for R12 because some Receivables tables and views were empty after the upgrade. I don't get into the functional side of things very often, so I don't know if AR is similarly affected.
Sorry I don't have much detail to offer, but maybe this will give you a starting point for further research.
Regards,
John P.

Similar Messages

  • Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

    Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
    SELECT po_header_id, segment1, type_lookup_code
    FROM po_headers
    WHERE segment1 = '5000002'
    Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
    EXEC mo_global.set_policy_context('S',129)
    But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
    ===========
    I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
    I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
    Please suggest. Appreciate your response.
    Thanks,
    Kesava Chunduri

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • Missing data in ap_check_stocks after R12 upgrade

    Hello,
    We are currently in version R12.1.2 and I have an existing query from R11 which gets data from ap_check_stocks table. I am however not able to find any data on ap_check_stocks after R12 upgrade. Has this table been discontinued? I do not find any link in metalink which says that as well...
    The join used in the query is between ap_check_stocks and ap_checks is ap_checks.check_stock_id = ap_check_stocks.check_stock_id... Has something changed in R12?
    Please help!
    Ramya

    You can find AP_CHECK_STOCKS synonym in R12 and the base object is AP.AP_CHECK_STOCKS_ALL table.
    Please refer to eTRM for details.
    SYNONYM: APPS.AP_CHECK_STOCKS
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AP_CHECK_STOCKS&c_owner=APPS&c_type=SYNONYM
    TABLE: AP.AP_CHECK_STOCKS_ALL
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AP_CHECK_STOCKS_ALL&c_owner=AP&c_type=TABLE
    Thanks,
    Hussein

  • Additional Setup After R12 Upgrade

    Hello Experts,
    We are currently in the Process of upgrading 11i.5.10.2 to R12.1.3.
    We are having GL, AR and Projects module as a part of the R12 upgrade. The question is straight forward, After R12 upgrade do we need to do any additional setup on subledger or GL level?
    If the answer is Yes, then pls guide me for the same.
    Thanks,
    Atul

    Atul,
    All the steps should be covered in the upgrade manuals.
    Oracle E-Business Suite Upgrade Guide
    Oracle Financials and Oracle Procurement Functional Upgrade Guide: Release 11i to Release 12
    You may also review (R12.1 / R12.2 : Oracle E-Business Suite Releases 12.1 and 12.2 Release Content Documents (Doc ID 1302189.1)).
    Thanks,
    Hussein

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Hybrid Tablespace model after R12 upgrade

    Hello,
    I have done with the upgrade process from 11.5.9 CU2 to R 12.1.1 successfully, the instance is up and running. However, after checking the DB objects, I found that the old tablesapces have alot of DB objects. as shown below. Can I rerun the OATM tool now and do the migration?
    SQL> select tablespace_name, count(*)
    2 from dba_segments
    3 where owner = 'AP'
    4 group by tablespace_name;
    TABLESPACE_NAME COUNT(*)
    APPS_TS_NOLOGGING 2
    APD 237
    APPS_TS_TX_IDX 206
    APPS_TS_SEED 10
    APPS_TS_INTERFACE 14
    APX 346
    APPS_TS_TX_DATA 100
    APPS_TS_SUMMARY 3

    Rami,
    I believe I have provided the docs you need to refer to in your other thread -- Re: R12 upgrade patch driver failed because of CTXSYS invalid objects
    I am locking this thread since it is a duplicate.
    Thanks,
    Hussein

  • How to uninstall the 8.0.6 Oracle Home after R12 upgrade

    I would like to remove the 8.0.6 Oracle Home from the central inventory after completing an R12 upgrade. Using the 10.1.3 OUI, I am able to remove the 9iAS Oracle Home from the inventory, but the 8.0.6 Oracle Home does not have a checkbox that allows OUI to deinstall. I thought there was some 8.0.6 process that would do the inventory deregistration.

    I found 8.0.6 $ORACLE_HOME/orainst. Using orainst, I could remove all software except the reports server, that throws the following error:
    or60w.dei(0): FILE_NOT_FOUND while deinstalling │ │
    │ │ or60w. (No such file or directory.)

  • Forms Personalization not working after R12 upgrade

    Hi,
    We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
    I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
    Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
    Thanks
    Regards,
    Shalantha

    Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
    Pl see if these MOS Docs can help
    Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
    Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
    Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
    Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
    HTH
    Srini

  • Abldxml giving error after R12 upgrade

    Hi,
    As a part of R12 upgrade, I'm running adbldxml.pls and it's giving following error.
    $ perl adbldxml.pl
    Starting context file generation for db tier..
    JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
    Restart adbldxml.pl with value for jtop as an necessary argument$

    JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
    Restart adbldxml.pl with value for jtop as an necessary argumentPass JRE_TOP as a parameter when you run "perl adbldxml.pl" command.
    Thanks,
    Hussein

  • After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

    I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
    After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
    Any suggestions please?

    What format is the external drive?

  • After I upgraded iPhone4 to iOS5.0.1, the iPhone screen was shown a picture which request me to connect it to iTunes.  I can do nothing on my phone includes dialing emergency call.

    After I upgraded my iPhone4 to iOS 5.0.1, the iPhone screen was locked and it has shown a picture which requested me to connect my iPhone to iTunes.  My iPhone can do nothing now. 
    I've tried to deleted my iTunes and downloaded the latest version.  However, when I plugged in my iPhone4, the plug-in sound is different from before and it cannot be detected by iTunes. 
    Please kindly help.

    So whenever you plug the iPhone into the USB port your computer doesn't recognize it???? At all?? Can you check on the hardware of your pc if by any chance is the USB being detected; like it will appear and then diss connect  from the pc, just to check and make sure that something is changing, of nothing occurs I will doubt on the cable, you can get one and then return it if it's not the case.
    If it is detected then did you backup the iPhone? If so you may need to rollback the change.
    Please try!
    Good luck

  • After Yosemite upgrade there is text glitch at the login screen

    After installing Yosemite on my iMac (mid 2011) the letters on the login screen are often unreadable.  Instead of letters only the stylized "A" graphic for the Appstore is displayed in little blocks.  It doesn't happen all of the time but it is an incredible nuisance.

    https://bbs.archlinux.org/viewtopic.php … 9#p1095349

  • Record not inserting into the table through Forms 10g

    Hi all,
    I have created a form in 10g(10.1.2.0.2) based on just one table that has 4 columns(col1, col2, col3, col4).
    Here col1, col2 and col3 are VARCHAR2 and col4 is date and all the columns are not null columns(There are no primary and foriegn key constrains, which means duplicates are allowed).
    My form contains 2 blocks where block 1 has one text item (col1) and 3 buttons (Delete, Save, Exit).
    And block2 is a database block and has col2,col3,col4 which are in tabluar layout frame displaying 10 records.
    When the form is opened the cursor has to be in block1.col1 for querrying. Here i enter a value in col1, and then when I click on col2 in the block2, then I put execute_query in new_block_instance of block2, which displays the records.
    The block2 properties are not updatable, insertable and query is allowed.
    Everything is working good until here. But here in the block2 when I want to insert another record into the table, by navigating all the way down to the last empty record and entering the new values for col2, col3 and col4 And then Ctrl+S will display the message "*FRM-40400: Transaction complete: 1 record applied and saved.*" But actually the record is not inserted into the table.
    I also disabled the col4 by setting the Enabled property to No, since while inserting new record the date have to be populated into it and it shouldnt be changed by the user. And im populating the sysdate into the new record by setting Intial Value property to *$$DATE$$*.
    And another requirement which I could not work arround here is that, the col3 also should be populated with the username of the user while inserting.
    please help me...

    Hi Sarah,
    I do not want to update the existing record. So I kept Udate Allowed to No in property palette for the items in block2.
    Do I have to do this property at block level also?
    I'm inserting a new record here.
    Edited by: Charan on Sep 19, 2011 8:48 AM

  • Avoiding duplicate records while inserting into the table

    Hi
    I tried the following insert statement , where i want to avoid the duplicate records while inserting itself
    but giving me the errror like invalid identifier, though the column exists in the table
    Please let me know Where i'm doing the mistake.
    INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
       SELECT 100,
              sk.obj_id,
              sk.key_txt,
              sk.obj_typ,
              sysdate,
              FROM S_KEY sk
        WHERE     sk.obj_typ = 'AY'
              AND SYSDATE BETWEEN sk.start_date AND sk.end_date
              AND sk.obj_id IN (100170,1001054)
               and   not exists  (select 1
                                                                   FROM t_map tm1 where tm1.O_ID=tm.o_id
                                                                        and tm1.sn_id=tm.sn_id
                                                                        and tm1.txt=tm.txt
                                                                        and tm1.typ=tm.typ
                                                                        and tm1.sn_time=tm.sn_time )

    Then
    you have to join the table with alias tml where is that ?do you want like this?
    INSERT INTO t_map tm(sn_id,o_id,txt,typ,sn_time)
       SELECT 100,
              sk.obj_id,
              sk.key_txt,
              sk.obj_typ,
              sysdate,
              FROM S_KEY sk
        WHERE     sk.obj_typ = 'AY'
              AND SYSDATE BETWEEN sk.start_date AND sk.end_date
              AND sk.obj_id IN (100170,1001054)
               and   not exists  (select 1
                                                                   FROM t_map tm where sk.obj_ID=tm.o_id
                                                                        and 100=tm.sn_id
                                                                        and sk.key_txt=tm.txt
                                                                        and sk.obj_typ=tm.typ
                                                                        and sysdate=tm.sn_time )

  • Records not displayed on the table view

    We have a scenario as follows :
    I am working on webdynpro project in which i have table on one of my second view.
    when i insert a records in the table by entering its values from the Form on the startView,  it is being shown as populated on the table.
    But once I insert my second record(s) also, the first or the previous records are not visible once i click on the display button.
    Can anyone help me to solve my problem as to how to see all the records inserted in the table on this view.
    Also plz let me know how to physically check the records on the database side.I am using the dictionary tables as my datasource and using SAPDB database.
    Thanx in advance..

    hi
    Try this code.
    Node-->Person
    Attributes of Person-->FirstName,LastName(String)
    ComponentController-->FirstCompController
    FirstView:
    onActionDisplay(...){
    String fname= wdContext.nodePerson().currentPersonElement().getFirstName();
    String lname=wdContext.nodePerson().currentPersonElement().getLastName();
       wdThis.wdGetFirstCompController().wdGetContext().nodePerson().currentPersonElement().setFirstName(fname);
       wdThis.wdGetFirstCompController().wdGetContext().nodePerson().currentPersonElement().setLastName(lname);
        wdThis.wdFirePlugOut1();
    SecondView:
    onPlug<plugname>(..)
    String fname=wdThis.wdGetFirstCompController().wdGetContext().nodePerson().currentPersonElement().getFirstName();
      String lname=wdThis.wdGetFirstCompController().wdGetContext().nodePerson().currentPersonElement().getLastName();
       IPrivateSecondView.IPersonElement elem=wdContext.nodePerson().createPersonElement();
       elem.setFirstName(fname);
       elem.setLastName(lname);
       wdContext.nodePerson().addElement(elem);
    you have to do navigationlinks from FirstView to SecondView and viceversa and also context mapping between ComponentController and views.
    In the second view also create actionbutton for navigating to the firstview and
    Fire the oubound plug also.
    Regards
    sowmya.

Maybe you are looking for