After range and formula expansion
Hi,
I' ve the same issue, i need to introduce a subtotal with the after range function, but i've a formula in a column, which is expansioned, this formula reffers to members in the rows, the problem is when the after range row is introduced the formula doesn't take this row into account so the reference is bad.
I explain myself:
a b c
1 10000 clientA evget(a1,b1....)
2 20000 ClientA evget(a2,b2....)
3 10000 clientB evget(a3,b3,....)
But if i insert the after range
a b c
1 10000 clientA evget(a1,b1.....)
2 20000 clientA evget(a2,b2...)
3EVAFTER =evsum
4 10000 clientB evget(a3,b3....)
If you can see in the row 4 the formula lost the correct reference.
Any suggestion?
I'm thinking in put the input schedule into stactic but is not a good solution, i can't insert blank rows because in the expansion i'm saying the bas members of a parent.
Thanx in advance
Hi Jose,
If you have an expansion in the rows and columns, then just write the formula as evget($A1,$B1....) in the first row.
Please note that I have used $ symbol in front of the column number to make them static. The row number has been kept dynamic. Now, if you run an expand, then the formula will be copied to the other cells, appropriately.
Hope this helps.
Similar Messages
-
Hi Experts,
I encounter a problem with my templates that use After RANGE or BEFORE RANGE.
In Planning Application, there is no problem downloading the file that uses AFTER RANGE and BEFORE RANGE but in CONSOLIDATION Application I was unable to download or open the file with AFTER RANGE and BEFORE Range.
When I tried to open it, the Excel Program Hangs or Not Responding, then I must End Process to use the Microsoft Excel again.
Any suggestions?
thanksWhy don't you just put contents of ds_remote_schema.ldif from the IS6.0 install packages to your schema file, any ##name you want and tell installer to use preconfigured directory?! Up to IS6.0ea2 schema was a separate file.
-
How retrieve the document after having added worksheets, logos and formula
Hi folks
IHAC in R12 which need to add worksheets, logos and formulas to web ADI interface. This has been done, so he wants to be able to retrieve this modified file when download the web ADI interface from the system.
Any tips and / or documentation are welcome
Regards
RichardI dont think this can be done.
-
AFTER RANGE for multiple selection
Dear Experts,
When defining two colkey ranges =EVRNG(A8:B9,C8:D9)
Can I restrict my AFTER RANGE value only to the sencond range (C8:D9)
I mean, make that the columns created by the EVAFTER only applys after the whole colkey range
display the column corresponding to the first range, the the column corresponding to the second range and
then the column generated by the EVAFTER.
Someone could help me limiting this After Range values to second col key range?
Thank you veeeery much.Thank you very much Madis,
I will try to build two EVDREs as per your suggestion, but my concern is.
Expansions between two EVDREs are compatible I mean, if I require following structure:
col1 col2 col3 (difference) col4 col5 col6 (difference)
ACC 1
ACC 1
Difference between column 1 & 2
ACC 2
ACC 2
Difference between column 3 & 4
2011.JUN
2011.OCT
Difference between column 1 & 2
2011.JUN
2011.OCT
Difference between column 3 & 4
V100
V200
Difference between column 1 & 2
V100
V200
Difference between column 3 & 4
I could filter time and version for first column in the first EVDRE and TIME and VERSION for secon column in the second EVDRE introducing the AFTER RANGE in the second EVDRE obtaining the desired result for the first section, for the first required account.
But what would it happen with second section, with ACCOUNT 2...I am afraid the first EVDRE will retrieve all accounts for TIME 1 and VERSION 1...and the at the end the second EVDRE will retrieve all accounts for TIME 2 and VERSION 2 , with out being able to compare values from selection 1 (TIME 1 and VERSION 1) versus selection 2 (TIME 2 and VERSION 2).
Thank you very much for your help.
Looking forward to hearing from you.
Best Regards. -
Yoga 13 Wireless Fix - far better range and speed using 5G Linksys AE6000 .11ac usb nub
$60 Linksys model AE6000 802.11ac USB hub has made my Yoga 13 a useful device. Benefits are as follows, along with a quick "how to" tutorial.
Far better range from my access point (80 feet with reasonable speed on Linksys vs. 30 feet using built-in Realtek WLAN card.
Significantly faster speed 55 meg/sec using 5G, compared to stock Yoga/Realtek's 2.4 GHz-limited 14-16 meg/second download speeds - both tests done same day using Ookla Speedtest.net)
No longer crashing after resume (I suspect the crashing that began with Win 8.1 is due to driver issue)
Recognizes both 2.4 GHz and 5 GHz WLAN networks (Windows 8.1 failed to recognize 5GHz signal until I backdated the Linksys WLAN driver to use Windows 7 driver).
TUTORIAL / STEPS:
Turn off (or at a minimum - review before downloating) windows updates - otherwise Win8.1/Yoga will over-write the good driver you're about to install and revert you back to slow WLAN performance. Give Microsoft 6-12 months & maybe they'll get the drivers right for their POS Win 8.1.
Create a restore point.
Download & the Windows 7 (yes, seven) drivers to a folder on your Yoga.
Then open the following folder:
C\Windows\System32\drivers
Locate the file named "netr28ux.sys" and move it to a new folder you create on your desktop (for safe keeping)
Download the Windows 7 x64 drivers for the Linksys AE6000 and the installation/setup program from the Linksys support pages here
http://support.linksys.com/en-us/support/adapters/AE6000
Extract those Win7 x64 files (including the netr28ux.sys file) into their own folder, then copy the extracted files to the
C\Windows\System32\drivers folder.
Run the Linksys AE6000's little setup utility, insert the little nub into your USB port, complete running the setup utility, type in (or select) your network, type in your password & select your encryption type, and you should be in good shape.
I turn my onboard "WLAN 1" card off using the right-swipe/charms, and the Linksys shows up as "WLAN 2" with the networks it's picking up.
CAVEATS:
The Linksys AE6000 occupies one your USB ports, but the Linksys AE6000 seems to have the smallest size (barely 1" sticking out) and was rated the fastest of its size by PC Magazine. Very good performance for .11n and .11ac environments.
This mod may not be for everyone. I was able to barely tolerate the Yoga's wireless limitations since purchasing in May, but the Win 8.1 rollout (along with what must be craptastic drivers) was the last straw. The system began behavng erratically, crashing after resume, and wireless was even worse (speed degraded to 1 meg/sec or less up and download, within an hour after a reboot).
I have not checked the impact of this nub on battery life. I suspect it may be a little worse than stock, but it may be a reasonable tradeoff for me to actually be able to travel more than 30 feet from my router/access point (and have YouTube stream in FHD without stutters/crashes).
BACKGROUND:
After Windows 8.1 update, my Yoga 13's wireless performance went from barely adequate to useless (crashed on resume, speed degradation an hour after fresh boot, etc.).
I'm sharing this info because I've enjoyed this machine's other assets so much. It's too bad we can't replace the Realtek WLAN card, and obviously Lenovo though enough of our issues suffered that they chose a different card for the Yoga 2 (although the antenna design still may be partly to blame for some of those performance issues as well). Love the keyboard, display, etc. and can put up with the fan noise (if someone has a fix for fan noise though, please post to this thread or point me to the fix).
Best of luck with this potential (relatively inexpensive) work-around. It's not as ideal as switching out the internal card, but I'm pretty pleased so far. If there are other wireless fixes, please share on this thread.
Thanks,
StanfordHaving used this thing for a couple of weeks now, I'm still amazed at how great the network performance is and how it's transformed my Yoga 13 into a near-instant device around the house (incl range that extends to the garage and perimeters of front & back yards. And traveling is pretty phenomenal too - great speeds at the hotels we've visited (instead of having to tether my 4G phone because Lenovo's weak-sauce wireless couldn't hang onto a 1-bar connection for 3 minutes).
It's a small tradeoff in having a 1" by 1/8" inch "nub" stick out of a USB port, but one of the best $60 upgrades I've ever done. Highly recommended. -
After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Numbers' Functions and Formulas in Multiple Cells, Tables, and Sheets
Hello,
I'm stuck with specifics that center around usage, and I get the funny feeling I'm overlooking a simple detail or two.
If I may, here goes.
I'm working with a single spreadsheet that has several sheets within it, and each sheet has an identical table. Each table is used to record various data, and I use an additional table in a separate sheet to consolidate some of the information, so that I can track results, at a glimpse, by looking at averages, totals, etc.
Each data table is organized for consolidation by tracking wins, ties, or losses. It is important to know that each data table only records a single win, tie, or loss along with its other applicable data. And on the actual consolidation table I am trying to tally specific data fields by the use of Numbers' functions and formulas, yet I wish to keep these tallied results organized by the determining factor of whether or not they were gathered from a table that recorded a win, a table that recorded a tie, or a table with a loss.
To illustrate, each table contains data fields that record start time, finish time, elapsed time, the day of the week, etc. Let's say I have eight tables, and the first two are winning tables, three more are tables that record a tie, and the last three are losing tables. For example, on my consolidated data table I wish to enter a function and formula capturing which of the eight tables are wins, ties, and losses so that I can, at a glance, see how much time elapsed to obtain the wins, ties, and losses. So then, in this example, for wins I want to determine which of those wins took 20 minutes, or which of them took 15 minutes, etc. So then, out of the two wins, let's say both of them took 20 minutes each. I need the numeral 2 to be counted and recorded on the consolidation table since only two tables match the criteria. And I would do the same for all remaining data fields (e.g., start time, finish time, etc.). Just so long as everything is determined by wins, ties, and losses, and then organized by the respective data fields. Simply put, this example determines a total of two wins that meet the data field requirement of 20 minutes. Out of the eight tables (one table per sheet) any other wins would then be organized according to the specific data in the elapsed time data field on it's data table (e.g., 5 minutes, 15 minutes, etc.).
The exact syntax structure of the functions and formula I'm unsuccessfully using follows below. It only seems to return a result of 1, and I think it is returning this value from the IF Statements. By the way, the Win, Tie, or Loss cell in each data table is cell formatted as a pop-up so I can either select None or 1. But in this example I'm basing this on the time period of 20 minutes, and out of the eight data tables I have two wins which also record the time period as 20 minutes, so I should see 2 and not 1 in the 20 minutes column of the consolidated data table. Also, I tried changing the syntax where I would type "=1" in the IF Statements, but it returned a result of =1, and if I don't include the equals sign and quotation marks the result just shows up as 1.
My Syntax:
IF(Trade 1::'Data Recorded (1)' '* Win', 1, IF(Trade 2::'Data Recorded (1)' '* Win',1, IF(Trade 3::'Data Recorded (1)' '* Win',1, IF(Trade 4::'Data Recorded (1)' '* Win',1, IF(Trade 5::'Data Recorded (1)' '* Win',1, IF(Trade 6::'Data Recorded (1)' '* Win',1, IF(Trade 7::'Data Recorded (1)' '* Win',1, IF(Trade 8::'Data Recorded (1)' '* Win',1, IF(COUNTIFS(Trade 1::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 2::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 3::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 4::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 5::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 6::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 7::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 8::'Data Recorded (1)' '* Time in Trade (in minutes)'))))))))))
Please bear in mind that the COUNTIFS portion of the above syntax structure is something I'm already successfully using to count the totals of other things not mentioned above, and I'm hesitant to delete it since it already works to my satisfaction when I want to, for example, determine the total number of overall wins. So, just for illustration purposes, I might have an overall wins column in my consolidation table that records how many wins there are, regardless of organization by elapsed time, or any other data field. In other words, the COUNTIFS syntax structure already works to my satisfaction. I'm not sure if it's possible to alter it so that it isn't so long, but what's there does work just when counting total numbers, as just mentioned.
In summary, I'm wondering which function I can use with the COUNTIFS function to determine which of my eight data tables are winning tables, but break those wins down further based on criteria like elapsed time, and in the above example the time elapsed is 20 minutes. As you may see above, I'm unsuccessfully using the IF function. Finally, I've looked at the function browser descriptions of things like LOOKUP, HLOOKUP, VLOOKUP, INTERSECT.RANGES, and a few others. And so far I haven't made good use of any of them the way I've done when I use the COUNTIFS function by itself when only counting overall totals. But now I must determine totals that meet certain criteria, as explained above.
Please help if you dare (smile). This is a huge project I'm undertaking, and so as not to cause confusion I have not included all of the details. But rather, I've taken a small sampling and set it to the side for experimentation. If this small sample works out to my satisfaction I can simply copy and paste the syntax in all other respective cells in the consolidation table, changing only reference locations, and perhaps conditions or values. One thing is certain, I don't intend on giving up on it.
Thank you for your time and advice.
Blessings!
Message was edited by: solo68
Added image.I'd like to edit the last paragraph of my second posting, but for some reason an entirely new posting is being created when I attempt to do this. So when reading this post, please use it to replace only the last paragraph of my second post containing the four inserted images.
Last paragraph begins:
In closing, I need each cell in each column of each row in my consolidation table to remain as is. I have my reasons for doing this, and they all serve a specific purpose. The only exception would be the formatting of the last three rows as footer rows. Most importantly, and I should have made this abundantly clear earlier, my apologies, I need a single function and formula in cell E7 of my consolidation table that will firstly determine which data tables are winning tables while secondly and simultaneously counting which of those winning tables have elapsed times of 20 minutes. Perhaps, now this better explains why my syntax is written the way it is written. In the example I provided, if the proper function and formula were written it would result as 2 in cell E7 in my consolidation table. If there is anything else specific you need of me in order to assist me, please request it. Thank you.
Last paragraph ends:
Additionally, to t quinn:
First off, thank you for returning to assist me. I really do appreciate your efforts. Please be aware that I'm avoiding going into details about each and every portion of my spreadsheet because I wish to avoid discussion that is off topic. As I stated earlier, I'm new to using these features of Numbers. My spreadsheet encompasses a much larger amount of data than I'm referring to in the example in my first post. But in my example I'm isolating just the information concerning what I'm now trying to accomplish to finish my spreadsheet project. Moreover, most of what I've done up to this point I was able to figure out on my own, or get help from watching videos on YouTube, or simply using the application help menu. Please be aware that I consulted all of these, repeatedly. I even contacted AppleCare, and was told this sort of support is not available. In spite of this, I've accomplished a great deal in my first large spreadsheet project. Please be aware that when I wrote my second post and specifically responded to you, I didn't want to be rude or ungrateful, and I still don't, but maybe the suggestions you and Hiroto made about gathering the count of wins, ties, and losses are something I've already done. I think I've done that separately. These counts are already in separate cells, and they are working fine. In my first post where I inserted only one image you can see examples of this in my consolidation table image, in cells B3 and E6. I apologize for not making this abundantly clear earlier. Furthermore, the portion of my syntax that shows the COUNTIFS is the exact way I accomplished this, and it is written the way it is written because I need separate sheets, each with their own data tables. Again, in cell E7 I need to determine which of the eight data tables that record wins are also recording 20 minutes, but I need this in a single function and formula with the result appearing only in cell E7. Once this is figured out I will adjust the syntax to do the same thing with every column (these are not shown but they exist) in my consolidation table for the last three footer rows, named Win Column Totals, Tie Column Totals, and Loss Column Totals. The last three rows being footer rows may not be necessary, and if so, I can convert them back to normal rows. Nonetheless, my consolidation table is counting the totals of all data in all data tables. This much I've already accomplished. Now I have one last function and formula I'm working on in order to determine which of the eight data tables record wins, ties, or losses while it simultaneously counts which of the wins, ties, or losses fall within certain categories like elapsed time, and this will be shown on my consolidation table only in the last three rows. Yes, I've gotten the total wins counted, and separately counted the total number of times 20 minutes was the elapsed time used, but so far, just looking at my consolidation table I don't know if the total number of times 20 minutes was used was with a win, tie, or loss. That's what I need to know now. Everything else is already accomplished. So then my consolidation table will show the totals for all data fields in my eight data tables as illustrated in cells B3 and E6. The last three rows of my consolidation table will break this down in a single function and formula with one row for wins, a second for ties, and a third for losses. And each of these respective last three rows will in the same function and formula determine if the win, tie, or loss also is one of the data fields in my eight data tables. How? By the use of columns in my consolidation table. Remember, each of my eight data tables are identical. In the example in my first post I only used one data field, elapsed time (Time in Trade), to illustrate in one column on my consolidation table what I'm trying to accomplish with all of the columns not shown in my consolidation table. Once this is figured out I can adjust it to complete the remainder of the consolidation table. Thank you, t quinn.
To all reading this and attempting to offer assistance, if for any reason I'm still not explaining myself clearly, please continue to ask me more specific questions. I realize it's hard to communicate this way, and if Apple allowed us to upload the actual spreadsheet it would make this entire forum a better place to communicate. But that's going off topic, so let's simply focus on the matter at hand. Thank you.
Blessings! -
I want to make a VI that will show me how many random numbers from 0-100 range should be generated. After that VI should draw a histogram, showing how many percent of numbers were from 0-49 range and how many from 50-99. There should also be two numeric indicators showing how many numbers were from both of those ranges.
I use "In range and coerce", but for example if I generate numbers: 78, 97,74;
First "In range and coerce" (50-99)" will show output: 78, 97,74, which is correct.
But second "In range and coerce" (0-49)" will show output 49,49,49 which I dont want; I just want to show in this example one zero.
After that I will connect both input to histogram, will be OK ?
See picture, thanks
Rookie; LV 2011 on WIN 7
Solved!
Go to Solution.
Attachments:
project 3.vi Front Panel _2.jpg 68 KBYes I know that but I have probelms, that from 3 input numbers,"in range and coerce" function make:
78, 97,74 and 49,49,49;
From 3 input numbers I need 3 output not 6 :/. If it's not in range, why than show 49,49,49 ?
After that I will make front side as this on picture
Rookie; LV 2011 on WIN 7
Attachments:
project 3.vi Front Panel _2.jpg 68 KB -
Good day,
I'm using labview 2009 and I have a problem using in range and coerced VI. The problem is that I want to map one analog value that goes from 0 to 12 to a scale of 0 to 20 and the VI in range and coerced but this VI is ignoring the numbers after the point. I already set the diferent values for the lower and higher limits but it keeps happening.
I posted my VI so you can see the trouble I'm having.
Best regards.
Esteban Gonzalez
P.D. The error is easy to see when the numeric indicator with the label "Current" have a value of 9.
Solved!
Go to Solution.
Attachments:
VI - Comparacion Corriente.vi 33 KBFirst of all, you probably would need much less code, maybe the size of a postage stamp. (hint: threshold array)
You have overlapping conditions, for example between 11 and 11.1, two LED will be lit.
You have gaps where it fails right between two LEDs.
LabVIEW Champion . Do more with less code and in less time . -
Is my AP801 Config optimal for range and throughput?
All,
Can somebody check my AP801 config to see if there are any changes I can make to improve range and throughput? The AP801 is built into my 881W. The AP is running IOS v 124-10b.
Thank you!
James
===================
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ap
enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXX
no aaa new-model
dot11 ssid YYYYYYY
authentication open
authentication key-management wpa
guest-mode
mbssid guest-mode
wpa-psk ascii 0 ZZZZZZZZZZZZZZZZZZZZZZZZZZZ!
username Admin privilege 15 password 0 XXXXXXXXXXXXXXXXXXXXXXXXXXXX
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm tkip
ssid YYYYYYYYYYYYYYYY
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel width 40-above
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.1.2 255.255.255.0
no ip route-cache
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner login ^CC
% Password change notice.
Default username/password setup on AP is cisco/cisco with privilege level 15.
It is strongly suggested that you create a new username with privilege level
15 using the following command for console security.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to
use. After you change your username/password you can turn off this message
by configuring "no banner login" and "no banner exec" in privileged mode.
^C
line con 0
privilege level 15
login local
no activation-character
line vty 0 4
login local
endDieter@be wrote:Allright, glad you like it. About vicious-git not properly getting installed, maybe it is not included in the repository you specified?
vicious-git isn't in any repository, I download it from AUR. It gets properly downloaded and uncompressed, but the chroot doesn't, fails with a 'cannot execute cd : no such file or directory' Once i've got some spare time this afternoon (still early in the morning over here ) I'll try to find out why
By the way, is there any functionality in AIF to execute a worker in a chroot on the target system ? I looked quickly through the list of workers in the automatic procedures and didn't see anything specific. Although I can configure most stuff from the configure_system worker, there are a few things where you really need to be running inside the system to configure. For example : you need to have the mysql daemon started if you want to change the password, and you need to be chrooted if you want to have all the dependencies when building a PKGBUILD If not, I was thinking of generating a bash script that would contain all my chrooted stuff, so I would only need to execute chroot once in the worker. -
Variable and Formulas Question
Hi folks,
I use BOXI r2 sp 4 and I have a general question re: variables and formulas in Webi reports.
Billing Year Month and Cost of Service are standard time dimensions and measures that I use in my Webi reports and they were created at the semantic level.
Normally, I create cross tab reports with the Billing Year Month along the horizontal axis and the Cost of Service in the Body (Business Unit or Department would be placed along the vertical axis).
For some reason, when I use formulas/variables to modify the standard time dimensions (like changing Billing Year Month to Year), the values for the Cost of Service are returned incorrectly.
Example.
Semantic object: Billing Year Month = (yyyy-MM) returns correct values
Report variable: Substr([Billing Year Month;1;4) returns incorrect values
Can anyone please explain this problem?
Thanks,
WannettaHi John,
The attribute of the Billing Year Month at the semantic level is a character type.
After reading your response, I realize that I may not have been clear regarding the problem.
The following formula does return the correct value in and of itself.
>=Substr([Billing Year Month];1;4
If I create a variable and then drag it onto my crosstab, it returns the correct value ONLY within the header.
When I drag the cost of service measure onto the crosstab; the header values remain the same but values in the body either disappear or the change to reflect incorrect values.
I thought one of the prime features of Webi was the ability of the Report Developer to create variables/formulas and use them in the headers to manipulate the semantic "measures" in the body (read: output) at the report level.
Is this a matter of semantic design or does Webi not possess this capability?
Or, is the issue entirely different?
Thanks!
W. -
Any way to remove rows without data so groupings and formulas can remain?
Hi all,
Does anyone know of a way (using a macro/Vba code) to remove zero or #missing rows from a spreadsheet so that groupings and formulas remain intact? Simple example:
7183.2224.0000 2000
7183 Misc Exp 1 2000
7430.2220.0000 0
7430.2221.0000 1000
7430.2222.0000 0
7430.2223.0000 3000
7430 Misc Exp 2 4000
Phase I Total 6000
How can I delete 7430.2220.0000 and 7430.2222.0000 from the above and keep formulas?
Thanks in advance.it would be easy to write a macro that deletes dows where the value is missing or zero. If in the macro you delete the row, depending on how you wrote the formula it should adjust. (like summing a range instead of hard coding + signs) an easy way to create a macro like this is to manually do it while recording the macro , then you can add logic to it to look at all cells
Edited by: GlennS_3 on Jul 6, 2011 2:29 PM -
Handling Out-of-Range and Overflow
How to deal with Out-of-Range and Overflow?
Suppose I have a SQL table with one column of datatype “tinyint”.
tinyint’s range is 0-255.
Table:
create table xyz
( userid tinyint not null auto_increment,
After inserting 256 rows, we cannot insert another row .
When MySQL stores a value in a numeric column that is outside the permissible range of the column data type, MySQL rejects the out-of-range value with an error, and the insert fails.
How to deal with this situation ?
Obviously we can use some data type with very big range for e.g. bigint .. but still every data type got some maximum limit. So, there must be a way through which we can deal with this situation.It appears that you are referring to MySQL, not Oracle. If you have a MySQL-specific question, you most likely want to post the question in the MySQL forum.
In general, though, what does it mean to you to "handle" the error? The insert throws an exception, your code can catch the exception. It can log the exception. It could, potentially, re-try the insert with a different numeric value that does not cause the failure. Is that what you mean by "handle"?
When you're designing the data model, you need to pick data types whose ranges are large enough to accommodate the data you will ultimately insert. If you want to be able to store values larger than 256, you would need to choose a data type for the column that can handle numbers that large. That means that when you are creating the data model, you need to know, realistically, how many rows each table will have and what the maximum value in any particular column will be. And you need to set the data types appropriately.
Justin -
LDEP and LALL expansion functions do not perform as expected
Hi all
I really need some help on this issue:
System: SAP BPC NW 7.5 SP7
Problem: The EVDRE LDEP and LALL expansion functions do not perform as expected when combined with PARENTAFTER.
Example: Assume that PARENT_A is HLEVEL 1
u2022 When using LDEP(5,PARENT_A),PARENTAFTER
u2022 HLEVEL 2 and 3 are displayed correctly with the members display first followed by the parent
u2022 However, all levels thereafter i.e. HLEVEL 4 + are displayed after their parent members
Note:
u2022 It is not restricted to HLEVEL greater than 3
u2022 Problem level = N +2 where N is the HLEVEL of specified parent member within the LDEP or LALL formulaMy experience is that LDEP and LALL are buggy in BPC 7.5 NW. If you reference the documentation only MEMBERS, BASMEMBERS, BAS, DEP, ALL, SELF, NOEXPAND, GDEP, GBAS, and GALL are supported memberset parameters/functions. My advice if you choose to mix the MS and NW worlds of BPC is to test VERY THOROUGHLY before productionizing any EVDRE since the MS functions are not officially supported by SAP in NW.
-
I have a numbers spreadsheet for tracking company data. I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year. How do I do that?
click and hold on one cell, then drag to select the range, then release, then type the delete key. Only inlude cells in the range you do not want to keey the contents of the cell. You can remove one-off cells by holding the command key and clicking cells to add or remove as needed.
You can download the Numbers users guide here:
http://support.apple.com/manuals/#productivitysoftware
Maybe you are looking for
-
When I tried to download a file from the Canon U.S.A, I clicked on the "I agree - begin download" button and nothing happened. The information in the status bar at bottom of screen, when the mouse cursor is over the download button is "javascript:dow
-
How to configure message archieving in PI 7.1 / 7.11 ?
Hi, I would like to configure message archieving in PI 7.11. Please advise on the any document / help that explain the step. Thank You and Best Regards Fernand Lesmana
-
Look of photos change when import from D40 into iPhoto 6
I'm using iPhoto 6 and have a Nikon D40. I'm having a problem when I import my photos -- the image quality changes when they go from the camera into iPhoto. The images look more contrast-y, more saturated. I mean, the reds and oranges are so intense
-
Error installing RAPID INSTALL R12 on Linux
I did a Rapid Install of Oracle Applications R12 (which contains 10g database) from the root user. After the installation, the system validates the configuration and it shows some problem with database availability. I have attached the log for databa
-
Problem reopening numbers Docs after HD change
Hey guys - I just updated my Macbook HD to a SSD and when I re-open any numbers docs they are illegible, totally white and impossible to edit by colour. Yet when I do q quick preview (press 'space' over document in finder) they look normal and I can