After re-installing my MacBook Pro hard drive, I lost my Firefox/Mozilla 'top banner' (red ,yellow and orange in color) and with it my ability to down load via a small tab located top right on it's bar. How do I get this function back??
Recently I found it necessary to re-install my entire operating system, and I lost my ability to down load streaming videos. I am an artist almost 70 yrs. old, and am not very computer proficient which is why I purchased a MacBook Pro. I used Firefox/Mozilla to do downloading because it was easy. When I brought my system back up I found that the top 'Firefox banner' had changed from red, orange and yellow in color to shades of gray. With this change found that I no longer had the download 'tab' to click on to initiate downloads (located top right on the Firefox top section).
I've tried re-installing Firefox and Antbar download helper but am still not able to download. How do I get the download capability back again???? ......roxor999
Your storage device is probably faulty. It would be helpful if you indicated the EXACT model/year MBP that you have.
Ciao.
Similar Messages
-
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
Lost iPhoto when Apple replaced damaged MacBook Pro hard drive
My son and daughter-in-law recently had to replace their MacBook Pro hard drive. Apple did the replacement, but they got it back without iPhoto. Isn't that standard software when you purchase a MacBook Pro? Shouldn't it be part of the replacement, too?
If your computer shipped with Lion, follow the directions here to redownload the iLife apps:
Restoring iLife applications after Internet Restore of OS X Lion or OS X Mountain Lion
If you erase install OS X Lion or OS X Mountain Lion on a new Mac that shipped with OS X Lion or OS X Mountain Lion installed, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start (up) from OS X.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications. -
My very expensive 2010 MacBook Pro hard drive died over a year ago. I finally synced my iPhone to the replacement laptop pc and it wiped out all the music on the phone including most of the purchases. Can I get the music back (restore didn't help)?
Okay, I finally got the couple of songs left on the phone to play by uninstalling and reinstalling itunes on the pc and re syncing. The last version I installed (just prior to my original post) failed to start due to some unspecified error?!?. Great!. But I still couldn't sync the itunes purchases from the PC to the iPhone. Then, after about an hour of googling and reading assorted posts mostly about using google to resolve the issue, I finally figured out that I have to actually download ALL the purchased albums from iCloud back onto the iPhone! There are hundreds of them, and some are not even available anymore.
Why do I have to do that when I originally purchased and downloaded all the music to the phone? Why are they all on the PC to begin with and why won't they go to the phone via the USB cable? Why didn't all the music get wiped out on the phone when I synced with the dodgy itunes I had to uninstall. never mind.
I accept that all my original music from cds and shared collections is gone on the failed mbp hard drive, but how come this once okay experience has become a trauma? Hundreds of songs to download all over again, sheesh, this has not exactlybeen a "That Was Easy" experience guys. -
New 15" Macbook Pro hard drive failure
It is common for a 15" Macbook Pro hard drive to crash after 3 months? How does Apple Support generally fix? Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.
"Any disk can fail at any time."
Over a large sample, the drives used are extremely reliable. You did not have a large sample, you had ONE drive.
Now you are much smarter than you were before this disaster. Apple will not pay for your data recovery. You (and everyone) need a backup solution.
Apple provides an excelent backup solution called Time Machine, that can do hourly backups to an external drive without disturbing your current work. Buy yourself an external drive at least twice as large as the built-in. Turn on Time machine, make sure it is working, plug it in at least daily, and then don't worry about it any more. -
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation. -
2011 Macbook Pro Hard Drive Upgrade?
Hi. I am looking at upgrading my 2011 Macbook Pro hard drive. I want to get a 7200 RPM hard drive. I have been looking on Newegg and doing some research, and from what I can tell, the 2011 Macbook Pro uses a 3.0GB/s interface. If I were to buy a hard drive that has a different interface, like a 6.0GB/s interface, would it be compatible? Does anyone know the sizing for an MBP hard drive?
Also, it doesn't matter who the manufactorer is right?
And finally, does anyone have any recommendations?But in my Honest opinion I don't think you'll really notice the difference between the 5400 and 7200 rpm unless your rendering large video files or transfering large amounts of data to an external or USB drive. But again you'll be limited on the speed of the external connections that your transferring too... If you really want to notice a difference, get the SSD with a Sata 3 or 6.0GBs connection speed. But the difference between a 5400 and 7200 rpm drive for normal tasks is almost negligable, you probably won't even notice the difference, but if you get the SSD you'll definately notice a difference in boot time, transfer speed, video rendering speed, copying speed of large files, etc...
-
Early 2008 MacBook Pro hard drive was killed; how to sync stuff
My early 2008 MacBook Pro hard drive was reimaged (not by me) and they lost everything on there, and have now put in a new hard drive, saying nothing was salvageable on the original HD. I have an iPhone, iPod, iPad. When i get the MBP back, how will I be able to get those devices synced so that everything I've bought/have goes back onto the HD?
The original HD was being reimaged because my work requires use of Windows, and I was using Windows via Boot Camp. Windows got a terrible rogue virus (from my clicking on a link), which shut everything down on that side. Work tech folks said they needed to reimage the Windows part of the drive, but said in the process, the reimaging took everything, Mac stuff included. That's why I'm in this situation. They are going to put in a new hard drive, but it is a blank slate.
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes. (For those who say shame on me, for not doing a backup sooner, you're right: But we have gone through 3 moves in 18 months, so it has been kinda nuts.)
I expect the MBP to get sent back to me in the next day. I have no idea how to put these pieces back together. I'm not even sure about data recovery, but am most concerned about iTunes/iPhone/iPod/iPad.
Thanks for your help!suzannemacuser wrote:
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes.
Two years ago??? Shame on you!!!
I found this the other day. It's old but still applies. This should be more than enough to help you get back on track. See the comments by Zevoneer
https://discussions.apple.com/message/7217190#7217190
You will have to check on each of these. Some of the links are outdated but there is more than enough to get you started. See this article about transferring purchases. The link is in the other thread as well.
http://support.apple.com/kb/HT1848?viewlocale=en_US
Backup! Backup! Backup!
Message was edited by: Demo -
New aperture library to ensure no space used on MacBook Pro hard drive
Hi
My laptop MacBook Pro hard drive is getting full (again). I mainly have photos on my laptop and iTunes. Using referenced files and having the raw photos stored on an external drive still eats up lots of GBs. If I create a new Aperture library on a portable external drive (that I can back up on Time Machine) is this the best way to ensure my photos are available to edit, but that no GBs of my hard drive are used up as I import to the NEW library on the 1TB portable external drive.
Are there any disadvantages or other ways to prevent any more hard drive GBs being used?
And should the new library NOT be referenced since the photos will be on the external portable until it fills up.
Many thanks
BWHi Kirkby
Appreciate your help and useful link. I think I have been doing exactly as you recommend to date, using my laptop internal drive to store the library etc. and a portable external drive FW800 for my referenced originals, together with iMovie clips for the same events/years. But my external is now full. And my internal drive is OK but I don't want to add more GBs to it.
It is the next step I am pondering. The main problem being to avoid any extra laptop internal GBs being used up.
I usually need access to originals and iMovie clips for the same event on one drive. My iMovie projects include both.
I could buy a 2TB portable drive and move all my originals to it, and even also the library but really I would prefer to have two externals and choose which one to connect, as required for Aperture and iMovie. And I would like maximum growing room on any new drive I buy.
(I back up my lap top and each external drive to time machine, and put my photos from memory card onto a DVD as unedited originals. I have usb2 and FW800 and FW400 only)
It's the best storage of new original photos and clips, and not eating up my last 50gb of my laptop drive, while enabling easy access to my most recent pics to enable more convenient editing, that are my issues. I don't want to have to sit at my desktop with a large external drive while editing.
Is anything daft or disadvantageous about creating a new aperture library on a new external portable drive to store and enable access to all my new photos from 2014 onwards? I realise I would have to switch to the old library and connect another external drive for pre 2014 access. And would this mean NOT eating up any more laptop internal drive GBs?
Thank you again
BW -
I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.
Did you try an SMC reset too? It's easily done and none of those resets to the best of my knowledge hurt anything. When I was fooling with my system, which at one point was a home made Fusion setup, I needed to reset the SMC sometimes to get the drives recognized. Reading the documentation the sudden motion sensor is drive related but that seems to be about it.
Some more specifics may be needed about the drive itself, the model number of your unit, and the OS version you're running.
At present, the problem seems sort of odd to me. FWIW cable problems can be quite intermittent. I used Scannerz to find some of the problems on my original system that I later converted to a new HD and SSD combo. It can find lots of problems if you learn how to use it right (HD problems, logic board system faults, and cable problems) but you need to get a system at least partially up and running to use it, and it doesn't sound to me like your there right now (in other words, don't go out and buy it because at this point I don't know how it could help you)
Another word of advice would be to not go out and start throwing parts at a problem unless you have a good idea what the source of the problem is. If you have a logic board problem, new drives and new cables won't make it go away, you'll just be wasting your money. Logic board problems, cable problems, and drive problems can all have very similar end user symptoms. The article that I linked above named "Hard Drive Problems" has a section on general symptoms of problems and if you read the article it becomes clear there's a lot of overlap associated with different types of problems.
I assume that your unit isn't under warranty. If, by chance it is I wouldn't even fool with it and I'd take it to Apple and let them deal with the problem. You also might want to check with whatever Apple sources you have available to test your system, like an Apple store, and see how much they'll charge (if anything) to evaluate the system.
I certainly hope this helps. -
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!
[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465] -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks
And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all. -
Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?
I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive. Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP. And if so, is there any special formatting I would need to do?
It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD.
Maybe you are looking for
-
HT1560 What if Factory Restore doesn't work?
What if Factory Restore doesn't work?
-
Hello Gurus, I have a material that have the next UOM: 1 PC (BUM) = 3 BAG When I make a GR (mov. 261) for this material in 1 BAG (UOM at the BOM) the system makes the convertion to PC and discounts 0.333. See the next example: Initial Stock:
-
While upgrading to iOS 7.1 the process failed...
...with the PC that I normally synchronise my iPhone. I have managed to do a fresh install of iOS 7.1 using another PC. However, now is there a way I can recover my historic data (Contacts, App settings, etc) from my original backup that was on iOS 7
-
Treasury-FI Organization Structure
Dear All, Please follow the scenario given below: In IMG>Financial Accounting>Financial Accounting Global Settings>Ledgers>Parallel Accounting>Assign Accounting Principle to Ledger Group Here we have 2 ledgers defined apart from leading ledger 0L.The
-
WEBI error with multi-line descriptions for a Business Layer in information Design Tool
help from Anyone on my problem described below would be greatly appreciated! I'm working with Information design tool and am building a Business layer on top of my universe to prevent a clash of context in my query. I want a description on my busine