After reboot the password is not asked

Hi All
I have just installed ArchLinux for the first time, using the beginners guide
After installing it, configuring it, generating the master key required for pacman updated, I run:
pacman -Syu
After some of the things have been installed, I did get an error:
error: failed to commit transaction (conflicting files)
filesystem: /etc/mtab exists in filesystem
So after searching the forums,  I found this command, which didn't help:
pacman -S filesystem --force
So then I run:
pacman -Syu --force
This seemed to install some stuff and finished apparently successful. So I did a reboot, just to have everything clear, and I found out I can not login anymore when the system starts.
This means that the login prompt from tty1 appear:
Arch Linux 3.4.4-2-ARCH (tty1)
<hostname> login:
after typing root (or my other user I have created) the system hands a few seconds(I can still type rubbish in the meantime), and just returns to the same message to enter my login. The prompt to enter the password never appears...
Of course even if I change tty's it doesn't get better.
After it comes back to the logging it has the message: Hint: Num lock on. It's like he is checking for my password and it's wrong. But I do not provide him with one.
Any suggestions you might have?
The system is a WM machine, so I don't care if I have to Nuke it.

I met a same problem,at last I pacman xorg and kde through chroot by ubuntu system,then I can login KDE,but can't login cosole. why?
My partitions are as listed below:
sda1   -win7
sda5    windows partition
sda6   /      archlinux
sda7  /home      archlinux
sda8  /       ubuntu
I login on ubuntu,open a console, input as below:
sudo mount /dev/sda6  /mnt
sudo mount -t proc none /mnt/proc
sudo mount -t sysfs none /mnt/sys
sudo mount --bind /dev /mnt/dev
chroot /mnt   /bin/bash
pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils xf86-video-nouveau nouveau-dri
pacman -S kde
sudo gedit /mnt/etc/rc.conf
sudo gedit /mnt/etc/inittab
exit
logoff ubuntu
reboot
Now there is a kdm
Last edited by xinbo (2012-07-11 14:45:02)

Similar Messages

  • Why the iphone and Ipad if you have a password and you try turning off the password does not ask you to turn it off?

    my girlfriend stole his iphone 5 and could not find my iphone locate because they turn it off.
    my question is, if the iphone 5 have a password to access does not ask why when I try to shut down?
    apple should of IOS patching to ask for the password to turn off the device.

    I see your point but if they are running iOS 7 on the iPhone they can locate it next time it is connected to the internet. Whoever has the iPhone cannot stop this without turning Find My iPhone off which requires the Apple ID password.
    At some point in time that person will connect the iPhone to the internet and when they do the owner will have a location, if they restore the iPhone in recovery mode they won't be able to activate it so the iPhone will be useless to them.

  • After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    Yes, you will still get the prompt.
    I meant reset then try the recovery mode restore again.
    You can also try DFU Mode.
    DFU (Device Firmware Update) Mode is different than Recovery Mode.
    DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
    DFU Mode:
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
          NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

  • The password file is getting corrupted after rebooting the standby database

    Hi,
    The password file is getting corrupted after rebooting the standby database.
    Since the databases are not in sync, I had to copy the pwfile from primary to standby to make 'em sync.
    (BUT.... the pwfile is not getting corrupted every time I reboot the standby by)
    Could somebody please explain the reason for the pwfile on the standby database getting corrupted while rebooting ?
    Env: Oracle 11g on Windows 7
    Thanks in advance

    Moderator Action:
    This thread was originally posted to the Oracle/Sun Servers HARDWARE forum.
    This is definitely not an issue related to any hardware components.
    ... it's now moved to Database General Questions, hopefully for closer topic alignment.

  • When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    Hi SheilaStuhr,
    The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
    Basic troubleshooting
    See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
    Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
    Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
    If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
    Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
    Install the latest version of iOS.
    Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
    If you still see the issue, restore the iPhone.
    If you're still experiencing issues, try the steps below.
    Wi-Fi troubleshooting
    If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
    Turn Personal Hotspot off.
    Turn on Wi-Fi: Tap Settings > Wi-Fi.
    Turn on Personal Hotspot.
    If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
    If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
    See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
    If the other device still can't connect, turn Wi-Fi off and on for the device.
    Make sure that your device can see other Wi-Fi networks.
    Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/en-us/HT203302
    All my best,
    Allen

  • TS5223 After my iphone updated to ios7, it reverted back to my old icloud account which I do not know the password, do not have access to the email it sends the reset to and the reset for security options say my birthday information is wrong.

    Help!!! I've lost all of my contacts and information after the ios7 update. After the update I plugged my phone into my MacBook and it reverted back to my old icloud account. I checked my MacBook and everything on there is connected to my new icloud account. I'm not sure why this has happened, but I have been trying for two days to get my new icloud account back. My phone won't allowe to log out of the icloud account it is logged into because I don't know the password. Simple solution, reset the password. Not so simple. I don't have the email address associated with the account anymore. So I attempted the security question option. When I entered my birthdate, it said that it was incorrect. I have tried multiple times and nothing will work. Can someone please help me??

    If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • I am trying to restore a backup onto my iphone from itunes but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup?

    I am trying to restore a backup onto my iphone from itunes on a pc windows 8 but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup? Any help is very appreciated

    Try entering the password on your iPhone

  • Oracle SSO not showing up status after rebooting the 10gapplication server

    Hi all,
    I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
    After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
    For Infrastructure
    1.     To make the metadata repository up and running
    Log in as an oracle user
    #cd /home/oraASInfra/bin
    #export ORACLE_HOME=/home/oraASInfra
    #export ORACLE_SID=mamcinfr
    #./lsnrctl start
    #./sqlplus
    Enter userame: sys as sysdba
    Sql>startup
    Sql>Exit
    2.     To start the other components of the infrastructure
    Log in as an oracle user
    #cd /home/oraASInfra/opmn/bin
    #./opmnctl startall
    3.     To start the iasconsole
    #cd /home/oraASInfra/bin
    #./emctl start iasconsole
    For Middle tier
    1.     To start the middle tier components
    Log in as an oracle user
    #cd /home/oraASmt/opmn/bin
    #./opmnctl startall
    2.     To start the iasconsole
    #./emctl start iasconsole
    In the MT all the components is showing up status
    In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
    There is no any port conflicts between the infrastructure and MT.
    Is there any post installation tasks has to be done after the installation?
    please help me to sort out the issue.
    thanks,
    C Saju

    1. After RapidWiz with 11.5.10.2 CDs, do we need to
    do any post installation step to make the browser
    load Oracle Forms. Do we need to create our own
    certificate using envshell.cmd and then adjkey. And,
    apply that to Jinitiator using adjbuild.sh and
    regenerate JAR files using ADADMIN Jar ( I am so far
    assuming that these steps are not necessary after for
    rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
    2. Do I need to apply the Oracle App 11i 11.5.10.2
    Maintenance Pack after installing using RapidWiz from
    the main set of CDs labeled as 11.5.10.2No
    3. Should I try by installing manually latest
    Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
    Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
    adjkey -initialize
    This will create the following files:
    - adsign.txt directory $APPL_TOP/admin
    - appltop.cer direcotry $APPL_TOP/admin
    - identitydb.obj directory $HOME of the user that launch adjkey
    Metalink note: 365735.1 should be helpful.
    Good luck

  • How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to ask me if i want to save the password or not, just save it automatically to my keychain.

    How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to safari ask me if i want to save the password or not, can it just save it automatically to my keychain qhitout asking?

    No. It's a safety feature. Select the appropriate response and the next time you visit, you won't be prompted.

  • HT201365 I downloaded the IOS 7 for my iPhone yesterday, asked for a password which I put in , now the password will not work, and I have disabled my phone . HELP

    I downloaded the IOS7 on my iphone yesterday. Asked for a password, put it in. Now the password does not work and my phone is now disabled. What can I do?

    Hi there Martha250,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Not able to connect after changing the password using ALTER VALUES clause

    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    Suri

    Suri wrote:
    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    SuriYou can only do it for the same user, as the password is a hashed value that includes the username as part of the hashing (It's either the username or some internal object id or something). So using the hashed value against another user won't work.

  • PI 2.0 - virtual express "setup" Fail - The passwords do not match:

    Hi all,
    Since my lab is mostly VM, I was going to upgrade my PI 1.3 to 2.0.  Cisco documentation says the inline upgrade is not supported for the small virtual appliance.  Anyhow, I deployed the new 2.0 Express virtual OVA file, allowing to to use all needed resources.
    To get to the point, when I run through the initial setup/bootstrap, I cannot get past the setting of the admin user's password.  Regardless of what I type, I always get the same message "The passwords do not match".  I can simply type the letter 'a' for a password attempt and am told they do not match.  Only when leaving it blank for the password do I see a message showing a 6 character minimum.  I can type abc123 or whatever basic combination, advanced combination, cases, symbols, numbers, etc.  No matter what I do I cannot make the passwords "match"!
    I have blown away the VM and re-deployed, validating checksum on OVA downloaded, PI-VA-2.0.0.0.294-Express.ova.
    I cannot get past this step.  Has anyone else experienced this or have any input?  I'm not finding anything in my searches.
    Thanks!

    So I was not correct in what fixed my issue.
    So, when I rebooted the host (which contains my MS 2008 DC as well), I had to access my vSphere from my local windows machine client (VM running on Oracle VBox on my MBAIR) through my VPN to my lab. 
    When typing the password Combos from my local Windows VM, I could get past this step.
    When it was time to type the ftpuser/web user (after I performed the initial setup), I again accessed through the vSphere Client loaded on the 2008 DC Virtual Machine running on the same host as the Prime 2.0 Install - same VLAN/etc.  I access this via RDP, then launch vSphere from that DC.
    From that client I was again getting the Passwords not matching.  Only when launching vSphere Client locally (from my local MB AIR VM) was I able to get the passwords to work.
    Bottom line, it seems when accessing vSphere client through an RDP session, using the console feature of vSphere client provided mixed/undesirable results.  When I access console from a vSphere client (non-RDP) it was working fine.
    Just figured I would let you know what seems to be the trigger.
    Thanks Scott!

  • An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

    Hi All,
    We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
    We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
    SqlConfiguration table. ie only the server name
    Note : We are not using XML Configuration.
    ConfigurationFilter
       ConfiguredValue
    PackagePath
    Filter_ftp               
     pqrft- pcmnt.uk.acenentcapmc.com:21
    \Package.Connections[FTP Connection Manager].Properties[ConnectionString]
    while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
    In the Configurationtable we have the following entires
    ConfigurationFilter
    ConfiguredValue
    PackagePath
    Filter_ftp                    
    pgrotmlceni
    \Package.Connections[FTP Connection Manager].Properties[ServerUserName]
    Filter_ftp
    21
    \Package.Connections[FTP Connection Manager].Properties[ServerPort]
    Filter_ftp
    abcdXYZ
    \Package.Connections[FTP Connection Manager].Properties[ServerPassword]
    Filter_ftp
    pqrft-pcmnt.uk.acenentcapmc.com
    \Package.Connections[FTP Connection Manager].Properties[ServerName]
    Filter_ftp
    pqrft-pcmnt.uk.acenentcapmc.com:21
    \Package.Connections[FTP Connection Manager].Properties[ConnectionString]
    In the package properties we have selected  "DontSaveSentivity" Option.
    We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
    Message
    Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.4000.0 for 32-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  06:53:16  Error: 2013-12-16 06:53:20.69    
    Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
    was not allowed  .  End Error  Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
    Manager".  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  06:53:16  Finished: 06:53:20  Elapsed:  3.822 seconds.  The package execution failed.  The step failed.
    ilikemicrosoft

    Hi Surendiran,
    The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
    ServerUserName, and ServerPassword.
    Reference:
    http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
    Regards,
    Mike Yin
    If you have any feedback on our support, please click here
    Mike Yin
    TechNet Community Support

  • I try open sauvegarde but he said me the password is not good

    on my pod touch i make a sauvegarde and after ré-initialisation but wen Itry use the sauvegarde he said me the password was not good?
    thank yo

    What is "sauvegarde"?

  • ElementsAutoAnalyzer abends within a few minutes after rebooting the PC.  How can I fix this?

    I decided to start my PC from scratch (new hard drive, reinstall Windows 7 Ultimate 64-bit, then all software).  ElementsAutoAnalyzer abends within a few minutes after rebooting the PC.  How can I fix this?
    Event viewer shows:
    Faulting application name: ElementsAutoAnalyzer.exe, version: 12.0.0.0, time stamp: 0x530b7bfc
    Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
    Exception code: 0xc0000005
    Fault offset: 0x0000000000031ccc
    Faulting process id: 0xbdc
    Faulting application start time: 0x01d072bd95218cd4
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 12 Organizer\CAHeadless\ElementsAutoAnalyzer.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: ea495e82-deb1-11e4-9750-001c25e903e8

    Erica from Apple support:  Your efforts to help on this subject are appreciated.  However, during my wait for your supervisor, just when I stepped away from my desk for a moment you must have picked up your phone again.  When I heard a noise (other than the hold music) I rushed back to my desk only to hear you hang up.  When the phone rang and the ANI said "Apple support" I tried to pick up but you were gone by the time I got the button pressed.
    Hopefully you'll see this note and leave a message on how to resolve this issue for me and the others from other similar questions posed on this forum.
    Thanks,
    George

Maybe you are looking for

  • Why does iTunes and Safari reset data everytime its closed

    I have a power mac G5 and after I updated to the highest software update available, I find that iTunes and Safari reset their data everytime I close them. I have checked all settings and tried resetting to regular software and trying again. Any ideas

  • Format issue in opening an XLS attachment sent through email by ABAP2XLSX

    I have downloaded the ABAP2XLSX nuggets and tried to send an attachment in the email using the SAP. But when opening the attachment it is giving up an format issue and not able to view the content. I am able to save the XLSX file on the PC and able t

  • Orange E65 Wi-Fi and Livebox-driving me mad!

    Hi all, I have recently bought a reconditioned Nokia E65 from Orange UK. The phone is nice, but there is one thing that's driving me mad! I cannot connect it to my wireless internet. I am on Orange home max package and I am trying to connect the E65

  • How to display Error for a particular text box programaticaly

    Hello All, I have 5 text boxes in a form and I have a requirement where if user click on any of the text boxes then i need to pass the id to class A and show the error description related to that text box in faces message. I have created class A in w

  • Imported Stills are Over-saturated

    We're using PPro CS4 on a 64-bit Vista machine.  We've imported video into our timeline and it looks fine.  However, when we import the JPEGs we made in Photoshop CS4, they come in much more saturated than they show in Bridge.  We've checked in Camer