An error occurred in the requested FTP operation. Detailed error description: The password was not allowed
Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft
Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support
Similar Messages
-
FTP Connection Manager - The password was not allowed
Hi. I have created ssis package that sends a file via FTP. This works fine when testing on my local machine. When I import the package into Integration Services on the SQL Server then run as a job the file for output is created but FTP fails with error
below.
[quote]
Message
Executed as user: DOMAIN\Account. Microsoft (R) SQL Server Execute Package Utility Version 12.0.2000.8 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:27:55 Error: 2015-03-26 15:27:56.31
Code: 0xC001602A Source: Package Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed
End Error Error: 2015-03-26 15:27:56.31 Code: 0xC002918F Source: FTP Task FTP Task Description: Unable to connect to FTP server using "FTP Connection Manager". End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:27:55 Finished: 15:27:56 Elapsed: 0.375 seconds. The package execution failed. The step failed.
[/quote]
I am fairly new to this. Can anyone help?
Thanks,
Phil.See this thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/732db831-00ce-4f87-bc8c-ea7332ea529a/ssis-2012-ftp-task-password-not-saved-after-deployment
You are not saving the FTP password with the package.
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question. -
No fact table exists at the requested level of detail Error.
Hi Everybody,
Facing a issue on the using Fact less Fact tables.
Scenario:
========
Using two subject areas to develop a report.OBIEE 11g
Fact1 --> Compensation Plan Assignments Real Time
Fact2 --> Participant Detail Real Time"."Participant Details
On both facts we created dummy metrics on respective table id's and aggregated to ROWCOUNT.
As i said in earlier we are using the above 2 subject areas to develop reports.
Logical SQL:
===========
SELECT
0 s_0, "Incentive Compensation - Compensation Plan Assignments Real Time"."Role"."Role Name" s_1,
"Incentive Compensation - Participant Detail Real Time"."Participant Details"."Cost Center" s_2,
"Incentive Compensation - Participant Detail Real Time"."Participant Details"."Country Code" s_3,
"Incentive Compensation - Participant Detail Real Time"."Participant"."Participant First Name" s_4,
"Incentive Compensation - Participant Detail Real Time"."Participant"."Participant Last Name" s_5,
"Incentive Compensation - Participant Detail Real Time"."Participant"."Party Number" s_6
FROM "Incentive Compensation - Earnings Real Time" FETCH FIRST 65001 ROWS ONLY
Error Message:
==============
Expression 'RowCount:[DAggr(Fact - Compensation Plan Assignment.RowCount by [ Dim - Participant Details.Cost Center, Dim - Compensation Role.Role Name, Dim - Participant.Participant Name] )]' converted to NULL because [nQSError: 14020] None of the fact tables are compatible with the query request RowCount:[DAggr(Fact - Compensation Plan Assignment.RowCount by [ Dim - Participant Details.Cost Center, Dim - Compensation Role.Role Name, Dim - Participant.Participant Name] )]..
[2013-10-21T12:18:45.000-05:00] [OracleBIServerComponent] [TRACE:2] [USER-34] [] [ecid: 004uJx90aHO9lZ73VJJNB80007eh000gl_,0:2:1:9:5] [tid: 457c2940] [requestid: f2e001b] [sessionid: f2e0000] [username: [email protected]] -------------------- Query Status: [nQSError: 14025] No fact table exists at the requested level of detail:
Please share some ideas on this or any guidelines will be very much helpfull.Govardhan,
Did u configured any Dimension Hierarchy please set the levels in that particular Fact LTS.
For more info,check the below thread
https://forums.oracle.com/thread/2134934
Thanks, -
Trouble exporting: "the requested export operation cannot be performed"
I've been exporting different sequences (from the same project) using the same same settings all week but now suddenly when I try to export a sequence I keep getting the message: "the requested export operation cannot be performed". I have not changed any settings that I can think of and am really puzzled as to why FCP won't let me export. Also I keep getting a lot of "general error" messages while klicking in the timeline of the sequence. At first I thought it had something to do with too little hard disk space, but surely 380 GB should be plenty? Could it have to do with too little memory (running imac 3.06 GHz, 2GB memory)? Seems strange if it's a memory issue as I've been able to export all my other sequences using the same settings.
I'm exporting HDV 1080i footage to HD h264.
Any advice much appreciated!First, do you have any cmyk graphics?
Second, in my workflow, I almost always export from fcp with sequence settings and then do the compression in compressor. You might try that.
2gigs is not alot of memeory. You might try copying JUST your sequence to a new project and trying to export with just the new project open. Also, do you have plenty of hard disk space available on your startup drive. This is crucial as OSX swaps out memory to your startup drive when it runs out of ram. -
[nQSError: 14025] No fact table exists at the requested level of detail:
Hi All,
I am using OBIEE 11.1.1.6.8.
I have below senario...My fact table contains 3 LTS(yearly, Monthly, Weekly) and TimeDim contains3 LTSs(yearly, Monthly, Weekly)
Fact-Weekly joins with (D1,D2,D3) & TimeDimWeekly
Fact-Monthly joins with (D1,D2,D3) & TimeDimMonthly
Fact-Yearly joins with (D1,D2,D3) & TimeDimYearly
I hv also set the Fact source content to appropriate level of TimeDIM and details level of other Dimensions.
when i build a report using only year_code or month_code_or week_code as filter the query is going to appropriate physical sources
ie. if i take week_code as filter then the query firing to FactWeek, TimeDimWeekly & other Dimensions
if i take Month_code as filter then the query firing to FactMonthk, TimeDimMonthly & other Dimensions
Problem is when I use dynamic filter its is giving [nQSError: 14025] No fact table exists at the requested level of detail: error.
My filter is something like this using presentation variable pvTime (filter is prompted)
case '@{pvTime}'
when 'Weekly' Then "Calendar"."Week - WYYYY"
when 'Monthly' Then "Calendar"."Month - MONYYYY"
when 'Yearly' Then "Calendar"."Year ID" end
Please help me if I missed any step
Thanks
SmitaIts a guess but try the below.. As you are using the CASE statement in your filter, use it in the below way.
Store the value that is prompted into a presentation Variable
YOUR WAY
case '@{pvTime}'
when 'Weekly' Then "Calendar"."Week - WYYYY"
when 'Monthly' Then "Calendar"."Month - MONYYYY"
when 'Yearly' Then "Calendar"."Year ID" end
SUGGESTED WAY
(case '@{pvTime}'='Weekly' and "Calendar"."Week - WYYYY" = '@{new PV}' THEN 1
when '@{pvTime}'='Monthly' and "Calendar"."Month - MONYYYY" = '@{new PV}' THEN 1
when '@{pvTime}'='Yearly' and "Calendar"."Year ID" = '@{new PV}' THEN 1 ELSE 0 END) =1
This might correct the way your are using your CASE statement in Filters.. -
When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanksHello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling -
Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
RakeshHi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
The server responded with an error. The request for account "Yahoo" failed. The server responded with "502" to operation CalDAVAccountRefreshQueueableOperation
I am tired of how Yahoo has gotten worse and worse. It is the ONLY account I get problems with DAILY (even after removing and re-adding). AOL will act up once in a while not taking a saved password but accepting it when OK is clicked.... But Yahoo is always responding with such errors.... Today's calendar error is:
The request (CalDAVAccountRefreshQueueableOperation) for account “Yahoo” failed. -
that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O. -
I created a new public iCAL. Trying to send invitations to join and am receiving this error message:
The request for account “iCloud” failed.
The server responded with
“400”
to operation CalDAVUpdateShareesQueuableOperation.
Tried copying the URL link provided for the Calendar into a MailChimp announcement. Not working.
I've tried the uncheck calendar method on iCLOUD and re-checking to stop the pop-up message.
Is this perhaps because they don't have an iCLOUD account? If they have iTUNES, shouldn't it work?
Appreciate any help.Try this first:
In iCal Preferences…, choose Accounts, then select the account that is giving you trouble. Uncheck the box labeled Enable this account. Wait a few seconds, then re-check the box. This should solve the problem. -
I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.
Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible -
I keep getting this message whenever i am connected to iCal which is a tad annoying.
The request for account “Work” failed.
The server responded with
“502”
to operation CalDAVAccountRefreshQueueableOperation.
Please help!
pippilaing (NZ)What I found works best is to do the following:
Quit iCal on you
Go to iCloud.com and sign-in
Create an event on the calendar
Sign-out of iCloud.com
Relaunch iCal
It will take a few seconds for the calender to resync, but you should see the new event pop up on the calender. After that, hopefully all is well. -
An Error occurred processing your Request
Hi,
I am using Blackberry Z30, I am from India, today i tried to update few apps and download few apps but i couldnt able to do instead i am getting the error "An Error occurred processing your Request ", can you please help me to resolve the problem...
Thanks in Advance
Regards
SamHi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
ORA-29702: error occurred in Cluster Group Service operation
Hi,
After shutting down one node I'm trying but without success to start this node up:
SQL> startup
ORA-29702: error occurred in Cluster Group Service operation
I got this message.
Here is a log from file: orcl2_lmon_13886.trc
/oracle/admin/orcl/bdump/orcl2_lmon_13886.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters and Data Mining options
ORACLE_HOME = /oracle/DB
System name: Linux
Node name: DB2
Release: 2.6.18-53.el5
Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
Machine: x86_64
Instance name: orcl2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 5
Unix process pid: 13886, image: oracle@DB2 (LMON)
*** SERVICE NAME:() 2008-12-19 10:08:26.214
*** SESSION ID:(1102.1) 2008-12-19 10:08:26.214
GES resources 21522 pool 8
GES enqueues 33158
GES IPC: Receivers 3 Senders 3
GES IPC: Buffers Receive 1000 Send (i:2750 b:1934) Reserve 1000
GES IPC: Msg Size Regular 408 Batch 8192
Batching factor: enqueue replay 201, ack 224
Batching factor: cache replay 126 size per lock 64
kjxggin: receive buffer size = 32768
clsc_connect: (0x1d19a030) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
2008-12-19 10:08:29.819: [ CSSCLNT]clsssInitNative: connect failed, rc 9
kgxgncin: CLSS init failed with status 3
kjxgmin: kgxgncin fails - (2)
kjxggin: generic group layer init fails
*** 2008-12-19 10:08:29.819
Global Enqueue Service Shutdown
*** 2008-12-19 10:08:29.820
global enqueue service detaching from CM:pid=13886
I did check listener, it did not work but I start it up:
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.3.0 - Production
Start Date 19-DEC-2008 10:49:42
Uptime 0 days 0 hr. 3 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /oracle/DB/network/admin/listener.ora
Listener Log File /oracle/DB/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
The listener supports no services
The command completed successfully
LSNRCTL>
Could you give me a guide how to start up this node? or where is a problem?A quick search of the Oracle documentation on the error number comes up with this
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96525/e29250.htm#1000969
ORA-29702 error occurred in Cluster Group Service operation
Cause: An unexpected error occurred while performing a CGS operation.
Action: Verify that the LMON process is still active. Also, check the Oracle LMON trace files for errors.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
Maybe you are looking for
-
Can I select the data of the indexes?
Hi everybody, Oracle storages indexes in index type segments as I know. Is it possible to see the data of these index segments like a table or view? So I would like to see not only the structue of it with: select * from dba_segments SG where SG.segme
-
Using iTunes in Parallels Environment with Mac Library
Is it possible, while running Windows XP in a Parallels environment on my Mac, to have the Windows version of iTunes access my music library located on my Mac hard drive in the normal position (~/Music/iTunes)? I've tried connecting the Windows versi
-
Compatibility Mode for itunes 10.3 due to error 2096
i have uninstalled and reinstalled itunes several times and still get the "error 2096" message. followed all steps as directed for removal. does this have anything to do with the compatility mode? should it be checked or unchecked? can anyone help?
-
How do i open a new tab without doing ctrl+t or doing file new tab?
How can I put in the "new tab" icon? Also, I would like to be able to have buttons on the toolbar, under the search box, where i can put shortcuts to my favorite websites. how do i do that?
-
Help to set my network...
Hello, I've got troubles to set my network correctly... Let me explain the configuration: 1. The router is connected to the internet, the WiFi is turned off. 2. Time Capsule is connected to the router with an ethernet cable, it's in Bridge Mode, the