After sp1- R2 upgrade, Clients cannot open Software center

Hi
I am in a bit of a bind.. 
We upgraded from SP1 to R2 (not CU2 just the r2 for starters)
All went well and all clients in our organization have been upgraded. 
Unfortunately I've discovered that the software center on the clients can no longer load.
It seems the ccm client is running fine it's just the software center that is not loading when I try to open it.
The error from the software center windows is(translated from Danish so I am unsure of the correct MS wording):
The Software center cannot be loaded. Problem loading the required components. You can try starting the software center later...
Only thing I've found so far that stands out in the logs so far (sccclient_MYDOMAIN@mrt_1.log) is:
<![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="06:47:16.5761062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="06:47:16.7331062" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7421062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="06:47:16.7451062" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
ved System.Windows.Interop.HwndTarget.OnResize()
ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="06:47:16.7491062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="06:48:37.5541062" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
Really hoping someone can help here!
Kindest regards, Martin

This is log excerpt from when I open software center until I close it (I accept the error windows)
<![LOG[Starting up... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8827861" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Client is running .Net Version4.0.30319.18444 (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at Main)]LOG]!><time="21:23:05.8867863" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Current working area is 0,0,1600,860 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9277886" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Default window boundaries for this size work area are 0,0,1200,750 (Microsoft.SoftwareCenter.Client.SCClient at SetWindowPosition)]LOG]!><time="21:23:05.9317889" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[SetServicePortalLink: Portal URL is set to http://aal-sccm01/CMApplicationCatalog (Microsoft.SoftwareCenter.Client.Pages.UtilityClass at SetServicePortalLink)]LOG]!><time="21:23:06.0917980" date="9-13-2014" component="SCClient" context="" type="0" thread="1" file="">
<![LOG[Unhandled exception was caught. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1017986" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[Exception System.Windows.Markup.XamlParseException: Der blev udløst en undtagelse under indstilling af connectionId. (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnGetException)]LOG]!><time="21:23:06.1057988" date="9-13-2014" component="SCClient" context="" type="3" thread="1" file="">
<![LOG[ ved System.Windows.Markup.WpfXamlLoader.Load(XamlReader xamlReader, IXamlObjectWriterFactory writerFactory, Boolean skipJournaledProperties, Object rootObject, XamlObjectWriterSettings settings, Uri baseUri)
ved System.Windows.Markup.WpfXamlLoader.LoadBaml(XamlReader xamlReader, Boolean skipJournaledProperties, Object rootObject, XamlAccessLevel accessLevel, Uri baseUri)
ved System.Windows.Markup.XamlReader.LoadBaml(Stream stream, ParserContext parserContext, Object parent, Boolean closeStream)
ved System.Windows.Application.LoadComponent(Object component, Uri resourceLocator)
ved Microsoft.SoftwareCenter.Client.Pages.PageControls.AvailableSoftwareDetailsControl.InitializeComponent()
ved Microsoft.SoftwareCenter.Client.Pages.AvailableSoftwarePage.InitializeUIBeforeDataRetreived()
ved Microsoft.SoftwareCenter.Client.Common.ClientUXMain..ctor()
ved Microsoft.SoftwareCenter.Client.SCClient.Window_Loaded(Object sender, RoutedEventArgs e)
ved System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
ved System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
ved System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
ved System.Windows.UIElement.RaiseEvent(RoutedEventArgs e)
ved System.Windows.BroadcastEventHelper.BroadcastEvent(DependencyObject root, RoutedEvent routedEvent)
ved System.Windows.BroadcastEventHelper.BroadcastLoadedEvent(Object root)
ved MS.Internal.LoadedOrUnloadedOperation.DoWork()
ved System.Windows.Media.MediaContext.FireLoadedPendingCallbacks()
ved System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
ved System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
ved System.Windows.Media.MediaContext.Resize(ICompositionTarget resizedCompositionTarget)
ved System.Windows.Interop.HwndTarget.OnResize()
ved System.Windows.Interop.HwndTarget.HandleMessage(WindowMessage msg, IntPtr wparam, IntPtr lparam)
ved System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
ved MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
ved System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
ved MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)]LOG]!><time="21:23:06.1097990" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
<![LOG[Exiting... (Microsoft.SoftwareCenter.Client.SingleInstanceApplication at OnExit)]LOG]!><time="21:23:10.2580363" date="9-13-2014" component="SCClient" context="" type="1" thread="1" file="">
Kindest regards, Martin

Similar Messages

  • After install KB2889927 Outlook client cannot load Offline address book.

    After install KB2889927 Outlook client cannot load Offline address book. Client says: Offline address book Connecting to Microsoft Exchange, and does nothing.
    After Uninstall KB2889927 Outlook clent download address book successfully.
    Somebody has a problem with KB2889927?
    P.S. Exchange 2013 SP1 RU6

    Hi,
    According to your description, I noticed that the issue occurred after install KB2889927 for October 2014 Office 2013 updates.
    I read the
    November 2014 Office Update Release and find that the following KB can resolve the OAB download issue in Outlook 2013, please install it to have a try:
    For Office 2013: http://support2.microsoft.com/kb/2899493
    Or for Outlook 2013: http://support2.microsoft.com/kb/2899504
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange 2010 - Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open

    Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
    The follwowig error is reported
     You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
    thanks,
    Hussain

    Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
    The follwowig error is reported
     You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
    thanks,
    Hussain
    I built this little command from the "CalendarProcessing" commandlet...  it cleared up my issues ...
    Set-CalendarProcessing -Identity joeuser -AddNewRequestsTentatively $false -AddOrganizerToSubject $true -AllBookInPolicy $true -AllowConflicts $true -AllowRecurringMeetings $true  -AutomateProcessing AutoUpdate -BookingWindowInDays 0 -ConflictPercentageAllowed
    50 -DeleteAttachments $false -DeleteComments $false -DeleteNonCalendarItems $false -DeleteSubject $false -EnableResponseDetails $true -EnforceSchedulingHorizon $true -ForwardRequestsToDelegates $false -MaximumConflictInstances 100 -MaximumDurationInMinutes
    0 -OrganizerInfo $true -ProcessExternalMeetingMessages $true -RemoveForwardedMeetingNotifications $true -RemoveOldMeetingMessages $true -RemovePrivateProperty $false -ScheduleOnlyDuringWorkHours $false -TentativePendingApproval $false -WhatIf
    Look at those settings in technet article dd335046
    good luck
    JLH

  • Recently replace logic board.  Cannot open software purchased from Ap Store.

    The Power supply and Logic Board were replaced.  Now I cannot open software purchased from Ap Store.  Computer gave message this was purchased for another computer and go go Ap Stor.   I did, and nothing suggested what to do???  Suggestions?

    You only know a very small part of the story.   THE ORIGINAL iMAC WAS ONLY JUST OVER A MONTH OLD!  The original Appointment was screwed up by Apple Support(?).  I was told to drop it off in the morning and return for the 3:15PM appointment, which I did only to find there had been no appointment made, but the case number was in the system.  I was told 3-5 days only to be notified by e-mail on the third day the logic board (motherboard) was bad.   Another wait.  A week later it was ready and it ran from about noon until the next day about 11 AM when it had an update that required a restart where is promptly died during the restart.  The Mgr of the Apple Store was gracious and had the computer replaced with a new one rather than trying something else.   Perhaps, you think it is fun to sit in a noisy store for half an hour or more, but I sure don't.  Where is Apple's QC??? China!  
    I owned a computer business for 15 years and never once made a customer go through this much trouble.
    If my computers made it through a 72 hour burn-in and did not have a problem in the next couple of weeks it never did have a failure.   My 15 year record of building computers had less than a 1% failure rate. 
    By the way, for your information if a new logic board is installed (I seemed to see several being done each visit) and the App does not recognize it, just uninstall it and go to the App store and re-install it.

  • Kernel Upgrade Error :Cannot open or remove a file containing a running prg

    Hello All,
    I have installed ECC 6.0 on DB2 /AIX and now trying to apply Kernel Patch 75 but after Uncar of SAR files and moving the same to EXE (/sapmnt/PRD/exe) I am nota ble to copy few files, Follwoing error is coming.
    As a reuslt of this error Dispatcher is not starting in PRD.
    cp -p /sapinstdir/kernelpatch/indep/dw_gui.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_gui.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/libregex.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/libregex.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/db/dbdb6slib.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dbdb6slib.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_stl.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_stl.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xml.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xml.o: Cannot open or remove a file containing a running program.
    cp -p /sapinstdir/kernelpatch/indep/dw_xtc.o /sapmnt/PRD/exe
    cp: /sapmnt/PRD/exe/dw_xtc.o: Cannot open or remove a file containing a running program.
    Plesae help me to resolve this issue.
    Regards & Thanks,
    Ankita.

    Hi All,
    When a shared library with read-other permission is loaded, it remains loaded (and available) even if no processes are currently using it. This allows faster execution, but may result in a message like "Cannot open or remove a file containing a running program" on installs or rebuilds of application libraries.
    Refer to the man page for subroutine dlopen and command slibclean.
    Regards,
    Mukul SHarma

  • Upgraded now cannot open files

    At the prompt of App Store that updates were available for Numbers, I upgraded today to 3.0.1.  Now, I cannot access any of my spreadsheets.  The dialogue box comes back: "The file “xxxx” couldn’t be opened.  Even if I open a new document and try to save it, I get a message back: "The file “xxx.numbers” couldn’t be opened."
    It appears that following the App Store update, I how have two versions of Numbers: the new 3.0.1 updated today and an iWork'09 version 2.3 updated 5 December 2012.
    The 2.3 version can create new spreadsheets but it cannot open any of my existing files.
    I can open the same iCloud spreadsheets and edit them on my iPad with Numbers 2.0.1, but afterwards I can still not open them with Numbers 3.0.1 on my Mac and the spreadsheet manager on the Mac shows the spreadsheet as Zero bytes.
    MAC OS X 10.9 (13A603)   Numbers 3.0.1 (1483)   &  Numbers 2.3 (554)
    iOS 7.0.4 (11B554a)    Numbers 2.0.1 (1074)
    Thanks
    Mark

    Another post which I cannot find at the moment, had a response to restart/reboot the Mac and, for me, this has worked.  There may be other issues, but you should try this if you had similar problems to mine.

  • After installing itunes update I cannot open my itunes  music files.  How can I fix this problem?

    I installed the latest Itunes update and after installing I cannot open my ITunes music files.  How do I fix this problem. 

    Hey Joey BOD,
    It sounds like you can't open your Music app on your iPhone after the update? First, try force closing the Music app if it is open in multitasking, which you can find out how to do here:
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    And if that doesn't work, I would reset the device:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Have a great day,
    Delgadoh

  • Firefox crshed after downloading latest version. Cannot open Firefox8 either

    After downloading FF9, it crashed. I reported the problem, but have not heard. FF 8 is still listed but I cannot open it. All I have is the FF icon on my desktop and clicking on it does nothing. How do I get FF back?Every time I try to open it, I get the same message"sorry FF crashed>>>>"

    Right-click on the Firefox toolbar and select Menu Bar to show the menu bar.
    Can you describe further the reloading issue please?
    You need to update your Java and Flash plug-ins:
    https://www.mozilla.org/en-US/plugincheck/

  • After I installed iTunes, I cannot open it.  Any suggestions?

    I installed iTunes, but cannot open it.  I have Windows 8.1 and Explorer 11.  Any suggestions?

    Howdy Virginia,
    If you are having an issue with being unable to launch iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • After updating to Yosemite I cannot open iPhoto!! Help!

    I updated to Yosemite yesterday and now I cannot open iPhoto. From anywhere! Has anyone else found this problem? Solution?

    You need to update iPhoto to a version that works with Yosemite. Download it from the Mac App Store.

  • After auto-upgrade Firefox cannot open my profile and won't start.

    I am running Firefox in a corporate environment. OS is Windows 7. Whenever an auto-upgrade is pushed out by Firefox, I get a message telling me that "firefox profile cannot be loaded it may be missing or inaccessible". Indeed, the latter is the case. My profile is no longer accessible to me. I am no longer its owner, according to Windows. Looking at the directory C:\Users\{my userid}\AppData\Roaming\Mozilla\Firefox\Profiles\5a5finmq.default, I see that it's owner displays as "Unable to display current owner." and I am frozen out of Firefox. Examining this folder in Windows Explorer I cannot read, write, delete or do anything with what was once my profile.
    Please don't tell me how to recreate my profile. This is a BUG and it needs to be fixed. I have a copy of an old profile and I am able to access it and transfer it into my profile directory and get up and running. BUT I SHOULDN'T HAVE TO DO THIS EVERY TIME FIREFOX DECIDES TO UPGRADE ITSELF. Why is Firefox mangling the ownership of my profile and when will this bug be fixed. I have a lot of important information in my profile and it's a pain to recreate this from scratch every time this happens.

    HI stevecoh1,
    I am sorry to hear that the auto update to Firefox on your NTFS file system/corporate environment did not preserve the user profile. I recommend using firefox sync and using a device you have admin rights to preserve the user profile.
    If you have access to a previous version of the profile it can be added to the profile folder that is missing in the update. Please reference these steps to restore the old profile.
    [http://kb.mozillazine.org/Recovering_a_missing_profile]
    [[Back up and restore information in Firefox profiles]]
    [[Fix "The bookmarks and history system will not be functional" error message]]
    I am hoping that the sqllite file is not locked on the user directory, though this will vary on the policy of the AD of your corporate environment. [https://bugzilla.mozilla.org/show_bug.cgi?id=551436] If the file is locked and this is consistent this bug does need confirming.
    I hope this helps, please post back let us know if it did or did not, we are happy to help.

  • On 3250 after 4.14 upgrade, couldn't open Web Brow...

    Hi,
    I've upgraded my 3250 to 4.14. I've formatted my memory card before upgrading firmware and after upgrade, I've installed Nokia Web Browser. I can see it in my menu. But when I click on the icon, it's not opening. I've tried once hard format the software too. What can be the problem?
    Thanks

    Hi Mahmet,
    Good to know that the C160 is now working.
    Maybe you can check the hard drives stataus from System status or run 'version' from CLI.
    You can also log a support case for IronPort engineer to look into what could have caused the system interuption if you wish.
    Thanks,
    Donny

  • Receive continual error messages after downloading Adobe Acrobat Pro; cannot open

    I had downloaded Adobe Acrobat XI Pro as a trial and it worked just fine. Just purchased it/upgraded as a subscription last week and I receive a "download completed successfully" message, but when trying to open, get an error message saying the program closed unexpectedly. I have uninstalled and reinstalled several times to receive the same message. Here is the error message I receive. What is the best way to get actual help from Adobe Acrobat XI Pro staff? I received an email from Sara Forsberg at Acrobat.com telling me to wait until my order was complete, and after a week it should certainly be complete by now - still same error message. Very frustrating given the cost of the program and that it is 100% useless so far. Need actual customer service at this point please.

    I suggest that you Contact Customer Care - click on the Still need help? button to chat with an agent.
    If you need more help from the forums, please post in the Acrobat forum; this is the forum for the Acrobat.com online service.

  • After 7.01 upgrade, can't open PowerPoint files from Mail

    After updating 4th gen iPad to iOS 7.01, PowerPoint slides attached to emails won't open.  Prior to the upgrade, I could double click on a PowerPoint attachment, which would proceed to download and then open it.  It also will not open in Quickoffice either.

    Thanks for the response but I think you've misunderstood the problem. I can not open any type of PowerPoint file off my server in keynote. This includes .ppt and .pptx files. (Also includes .doc, .docx, .xls, .xlsx in pages and numbers).
    Even if what you said worked it would take forever to go through every file and save them all as ppt 2007. Plus of course, I don't know what files I will need when. There are hundreds of resources I need to access when I'm at home. I need the flexibility to view the files when i need to and on the go. Normally I can download them off my school network on to my iPad in keynote and edit them then I email them back to myself ready to use the next day or to save back to my network. Currently I can not download any Microsoft office file. So I am now forced to have to lug my laptop home everyday, rendering my iPad and iMac useless. I can't pre-empt what I'll need and save it as .ppt as that is completely inflexible and that won't open anyways as this is not an issue with the version of PowerPoint file. This is an issue with how all Microsoft files are downloading from my school network to my iPad and iMac. I want Apple to allow this to work like it used to before the upgrades in operating systems. I wish I hadn't upgraded as it worked perfectly. :(

  • Changed drive letter after installation of Creative Suite, cannot open by double clicking file.

    Recently my computer died so I had to put my harddrive in another computer. The drive letter was different from my old drive. I didn't notice this at first and re-installed all my software that I wiped for a new Windows install on the partition (including the Creative Suite).
    When I tried to open another program that relied on the old install of the drive - it failed. So I changed the letter back to what it was originally as loads of programs installed on that drive relied on it.
    Of course when I changed the letter path of the drive all my Adobe Suite related files are no longer associated with the programs. When I try to manually open the file with the program - eg. E:/Program Files(x86)/Adobe/Adobe Photoshop/Photoshop.exe it doesn't set the default program, so every time I have to open photoshop and browse to the file I want to open (ctrl+O).
    Any solutions to this without installing the suite again?

    I've tried by going through this dialogue here:
    When I try to use the .exe to open the .psd it doesn't set it as a choice as if I didn't select it. I can set the default program to open it to notepad, hl2.exe etc. etc. but not the program im after.
    P.S. I don't know my login details because they are saved automatically at home. Hence new account.

Maybe you are looking for