After Sucessfull cloninig .. Source is pointing to Target  !!!!!

HI .
cat DEV_test.xml | grep http | grep login
         <login_page oa_var="s_login_page">http://test.erp.com:8000/OA_HTML/AppsLogin</login_page>
Please help..
Thanks
Vishwa

HI,
I logged in as apps user ..
I ran the
SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
Autoconfig in db tier  and Autoconfig in apps .. Completes successfully..
But still Target instance (Cloned) , is now again pointing to the original Source instance's URL.
Thanks
Vishwa

Similar Messages

  • How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

    How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

    Thank you so much. I could have searched a very long time and not found that. It is counter-intuitive to me that I would set the behavior for the drag source on the properties for the drop target.

  • SCCM 2012 - Pull distribution point and target PKI or HTTPS DPs

    I have spent several days researching this and so far have found only a single page that even takes a stab at offering a solution.
    Problem:
    Trying to target an HTTPS DP when creating a pull distribution point in SCCM 2012 R2. The link that I'm referring to that does offer a workaround is here(guess I can't post a link, but it ends with the following, how-to-set-an-https-distribution-point-as-a-source-dp-for-pull-dps)
    I have several problems with the proposed solution.
    Is a script really the only way to proceed with something that has up till now been a built in feature with the rest of the product.
    You have to provision the DP to use a self signed cert initially for it to even work, then supposedly you can add the private key to the DP later.
    Does that mean I have to unbind the cert from both the pull and target/source push DP in IIS?
    Powershell which would be a logical way to go, doesn't seem to make any head way(Mr. Snover I know you don't oversee configman but please push for more documentation, you've taught me to live and die by get-help. A single example for a command as large
    as set-cmdistributionpoint or add-cmdistributionpoint is a shame. Perhaps my update help just didn't finish properly and I'm talking prematurely. If that is the case then I apologize!)
    Is there no other solution other than build the DP with a self signed cert then run this VB script and then switch the private key later? I have read through a lot of the pull DP documentation and it makes mention of leveraging the SDK but I haven't seen
    anything definitive. I would like to at the very least convert this from VB to powershell(if that script is the only option) and I know how to convert the portions where it's interacting with the site's WMI namespace (smsprovider if I'm not mistaken).
    What I don't know how to do, rather don't have the chops for is what comes after. The site control file piece, I see it's also WMI and I could spend the time stepping through the different piece and just might to learn more about SCCM in the lab anyhow. I've
    spent the last year getting to know powershell and have spent next to no time with VB. I know enough to recognize what a script is doing.
    The environment:
    The reason this is important for me is I'm about to start the production build(been all lab up till now) that is going to have just under 300 DPs in the field connected via T1 lines. They were all 07 secondary sites. I was thinking about migrating them using
    the migration tool but considering the amount of work its going to take if that link is the ONLY path to target a HTTPS DP then I might as well just spend the time and manually uninstall and reinstall the field DPs. The client count in the field is an average
    of 50 machines per site where there are on-prem devices... Total client count is around 25k. The primary site in the datacenter will house the majority of the site roles unless I start running into resource issues, at which time I will begin offloading site
    roles to one of two more servers that I have slated for the project. No CAS, no Secondaries. SQL is co-located on the primary.
    Ramblings:
    I'm sure there are more people out there using PKI, and using pull DPs. How have you managed to target your HTTPS enabled DPs? Security wants this to be a HTTPS only environment, and up until now I have successfully done that. If someone could please point
    me in the direction of some more thorough documentation I would be very grateful. I understand that this is a somewhat new feature, but there has to be an easier way. Perhaps powershell can cleanly do it with the set-cmdistribution point...but when I update
    help and do showwindow for the command I only get one example and so far haven't found any other stories like mine with the exception of the link I posted in the beginning.
    While I'm rambling, Wally there are a lot of us in the community that are going to miss your presence at Microsoft and should you read this I wish you luck with your new position. But that is a whole different topic. Thanks in advance for any links or help
    you can provide. -K.R.

    Yes, this is the only way, from
    http://technet.microsoft.com/en-us/library/gg712321.aspx#BKMK_PlanPullDps: "However, you can use the Configuration Manager SDK to specify a source distribution point that is configured for HTTPS. To use a source distribution point that is configured
    for HTTPS, the pull-distribution point must be co-located on a computer that runs the Configuration Manager client. "
    Does "why" really matter , who cares? It just is. Whether it was an oversight, a coding bug, or an act of God doesn't change anything. Why does there "have to be" an easier way? And what's wrong with using the VBScripts others have
    written? A script is a script is a script particularly if you've been given it already. Just because the hammer is pink doesn't mean it can't hammer the nail in.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Mapping multiple source value to one target value in value mapping

    Hello experts,
    In my scenario, i need to map more than one source value to one target value in value mapping. Like:
    1        TenderPickup
    2        TenderLoan
    7        TenderPickup
    101     TenderPickup
    102     TenderLoan
    107     TenderPickup
    But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
    But this should logically be allowed. How can this be done. Please provide a solution.
    Thanks,
    Yash

    Hi Prabhu,
    When i right click on the target field, it gives me only 3 options:
    1) Insert Row
    2) Delete Value Mapping
    3) Value Mapping in all agencies
    I dont see nay option for duplicating rows.
    What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
    When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
    Please point out where i m going wrong.
    Thanks,
    Yash

  • Problem in work flow of PE while mapping 2 source structure into 1 target

    We have scenario in BPM where in we have to mapp 2 source structure's into target.
    To be more specific one structure occurance is 0 to unbounded and other one is of single occurance.
    We have done the mapping with target structure and tested it manually in mapping . its working fine..
    While testing it in Configuration scenario, In the workflow process i.e PE process flow, we were not able to get one of the source message structure as the input Message. Instead of two source messages, it is seen only one. Please guide us in this issue.

    actually we are receiving only one message, henece we do not need a correleation. But once we receive this message we are splitting into multiple messages in the transformation step. and we use these split messages in different transformation steps. but in one of the transformation steps we are unable see one of the split messages in the transformation step(though we have used the proper container element.). Please let me know if any ideas on this.

  • Message mapping---1 source structure and n target structures

    I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
    Depending on the above answer how many interface mappings do we need.

    Kalyan,
    you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
    Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple.  --> Only one MM and one IM
    Jayson

  • Measuring point wise target value.

    Hi,
    functionmodule to get Measuring point wise Target value or any db table to get  Measuring point wise Target value
    --Ganesh

    Hello,
    If you want to get measurement value from Measuring Point, you can use table IMRG. Reading is at field IMRG-RECDV.
    Thanks,
    Venu

  • There are two CDC methods - Source based CDC and Target based CDC which one

    There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
    If there is any document available which compares both and provides any info on performance etc, will be helpful.
    thank you for the helpful info.

    LIke Suneer mentioned CDC is for better performance.
    Following link would be helpful.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
    http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
    Thanks,
    Arun

  • Modifying ALDSP data source end points programmatically

    I can see how to manually modify ALDSP data source end points through the ldconsole:
    http://edocs.bea.com/aldsp/docs21/admin/server.html#1042064
    but is there any programmatic way to do this?
    For my purpose, it would be adequate if there were some Ant tasks to do the job (e.g. like using the "wlconfig" task to tweak JMX attributes).
    Thanks,
    Mark

    You can modify the settings in <adminserverhome>/liquiddata/<yourApp>LDConfig.xml
    The settings are read from the file when the application is deployed

  • Replicating data between oracle9i(source) and 10g database(Target)

    sucessfully replicated data between source and target in 10g
    Now I have to replicate the data between oracle9i(source) and 10g database(Target)
    please help me to solve this issue

    sucessfully replicated data between source and target in 10g What sort of Replication you talking about ? Is it Object level , Schema level or DB Level ?
    Now I have to replicate the data between oracle9i(source) and 10g database (Target) please help me to solve this issue
    http://www.freelists.org/archives/oracle-l/08-2005/msg01260.html
    Hare Krishna
    Alok

  • Png blurry/pixelated after i used the vanishing point filter and save as a VSP file?

    Hi,
    Why are my png blurry/pixelated  after i used the vanishing point filter and save as a VSP file? And i'm using a high res picture. I'm using PS CC.
    I got some screenshots.
    This the result of the png
    Thanx in advance

    As I posted before, I would use it more if it had some of the functionality I need. I need to be able to change the opacity of the image I'm pasting so I can see EXACTLY where my overlaid image will register with the bottom image. VP seems to require a ton of processing and I wonder if maybe the software is handing off some of this work to the graphics card for calculating. Maybe this would explain that apparently not many people have run into an error that gets embedded in the file. Although my G5 is Apple stock, not super-modified.
    craig

  • Source selection derived from target field Cons Chart of Accts is empty

    Dear,
    When I run the LDS, The system issues this error message :
    "Source selection derived from target field Cons Chart of Accts is empty"
    Although, mapping of Cons Chart of Accts   in LDS for this method is defined as constant value.
    I can't load data from raw data cube. What can be the reason ?
    Thanks,

    Source selection derived from target field Cons Chart of Accts is empty
    Message no. UCT8257
    Diagnosis
    The system derives the source selection from the selection for target field Cons Chart of Accts. The resulting source selection is empty.
    System Response
    The system cannot read any source data.
    Procedure
    Examine the mapping rule for field Cons Chart of Accts. Make sure that the inversion of the mapping rule does not produce an empty selection or lead to conflicting values.

  • Split source message into multiple target messages

    Hi Experts,
    I have a scenario where a source message needs to be split up into multiple messages for the corresponding target systems.
    One source system and three target systems.
    Source system is a .Net application
    Target systems - SAP R/3, Two webservices on different application systems
    Can i implement the scenario above using BPM in the following manner?
    Source->WS Adapter->PI-->RFC Adapter->SAP R/3
    Source->WS Adapter->PI-->WS Adapter->Target 2
    Source->WS Adapter->PI-->WS Adapter->Target 3
    I could have a webservice at the source which would be called by the .Net Application
    Webservice request would be passed to an integration process which would split the message for the three target systems specified.
    Correct me if am wrong.
    Also please get back to me if you need more inputs
    Regards,
    Kalyan

    Hi,
          You can implement the same with out using the BPM itself...
    you can use either of the below options
    1. if target messages are optional like based on certain conditions if you need to route the message to the particular targets
    then you can use multimappings for the same which generates the mappings based on the condition for the particular target.
    2. if each incoming message needs to be routed to the three receivers each time then configure the three receivers at the receiver determinations one for each target...
    3. if you are using the same business system for all the three receivers then create the three interface mappings and configure the same at the interface determination level so that for each message three target messages will be generated and send to target...
    HTH
    Rajesh

  • How to Block GR after Rejection in Source Inspection - SAP QM

    Hi All,
    How to Block GR after Rejection in Source Inspection ? I have done a source inspection and rejected the inspection lot - but still I am able to do a GR for that PO.

    Dear,
    As per my view, It is not possible in partly quantity of purchase order.
    But when your Good receipt is done for your purchase order total quantity it set default delivery complete indicator in purchase order.
    But it is not match with your requirement.
    Please contact your ABAP team for your requirement.
    Regards,
    Mahesh Wagh

  • Acceptance Form after Sucessfull Login

    Hi,
    After sucessfull login , we got to show Custom terms and conditions page. In that page user should accept all the terms given by clicking on "Accept" button.
    Is there any standard way to acheive this in Portal?
    Regds,
    Srinivas.

    Hi,
    After sucessfull login , we got to show Custom terms and conditions page. In that page user should accept all the terms given by clicking on "Accept" button.
    Is there any standard way to acheive this in Portal?
    Regds,
    Srinivas.

Maybe you are looking for