Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

Similar Messages

Same source structure and different target structure without BPM

Hi Experts,
I am using PI 7.11.My requirement is at sender side the source structure is same.Basically invoice data coming from ECC to PI as a proxy message.
Receiver side adapter is JMS.At target side ,PI has to send the invoice data to 2 receiver systems.Payment node is coming in source XML,which always comes from ECC.For one of the business system ,Payment node should be sent.For the other BS,this node should be supressed.how to achieve this with single mapping?Payload based routing is not possible in my case as i dont have any field which differentiate the receiving system name.
Regards,
Karthiga

Hi,
In receiver determination, just input the two receivers (no conditions). In message mapping, you can use the constant function called receiver to suppress or create the node. You can only test it by editing the parameters in test tab e.g
At runtime, this value (receiver) will be filled out by the entries in receiver determination. So only one mapping is needed.
Hope this helps,
Mark

Does the message mapping editor insure that a valid target message is co

Hi Friends
Does the message mapping editor insure that a valid target message is constructed?
Regards
Sam

Samuel,
Message mapping editor ,will generate the output as per your logic. Hence you need to validate and check whether the target message has been created correctly.
If you say," I'm perfect with the logic, I created the mapping I checked the target strcuture, its perfect, always the data will be populated correctly?" If the above is your question, then the answer is YES.
raj.

What sap fi org structure . and co org structure .

what sap fi org structure . and co org structure .

hi subhash....
FI structure is
Client->Controlling Area>Company Code-->Business area...
The Co organization structure is

Operating concern [/b>- Controlling area > Comapny code--> Cost center

Thanks & Regards
ranjit
null

How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
DT_PWC_Customer
RECORDSET
CUSTOMER
 REF_NO
 CUSTOMER_NO
Source Structure of File 2:
DT_PWC_Customer
RECORDSET
METER
 REF_NO
 METER_NO
Target Structure of Final Output File:
DT_PWC_CustomerMeterData
RECORDSET
CUSTOMER_METER
 REF_NO
 CUSTOMER_NO
 METER_NO
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Mapping Issue with 7 source tables and one target table in one step

Hi,
Request for a small help in OWB.
I am trying to map 7 source tables to a single target table in one step.These source tables are in Oracle 10G database but dont have PK and FK relation ship.
I am able to link one table to the target by pointing some of the columns. But when coming to the second table it is giving some error message :
Ap18003: Connection target attribute group is already connected to a incompatible data source. Use a joiner or set operator to join the upstream data first before connection it to this operator.
As per the error message I used a Join operator and tried to map the second table to the target but still giving me the same error message. Could some body give me a hand to give out from this step.
Thanks for your help in advance.
Cheers,
Krishna.

Hi,
like this:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- my_id -> Number(9,0)
- name -> VARCHAR2(500)
Outgroup
- id -> point to target_table.id
- name -> point to target_table.name
Not:
Ingroup1
- id -> Number(9,0)
- name -> VARCHAR2(500)
Ingroup2
- name -> VARCHAR2(500)
- my_id -> VARCHAR2(9)
Regards
Detlef
null

PI Message Mapping One Source to create two of the same Target Nodes.

Hi,
I have a source node that contacts the following.
"1234-5678".
When there is a "-" in the source node then I need to create two target nodes.
When there is no "-" in the source node then only create one node.
Since the source structure is a flat structure by on the target side as you can see I am trying to achieve a diep structure.
Please can you assist in how to do this with PI message mapping.
Regards
Willie Hugo

Hi,
"1234-5678" only occurs once in the source. There is no source xml node that will occur more that once. The whole structure only occurs once. But on the target side I need one of the node to occur more than once if a hyphen is found in the source field.
Source Message - Always only one data node.
==============
<root>
<OnceOnlyNode>1234-5678</OnceOnlyNode> [1..1]
</root>
Target Message - Only two text node when "-" in source, else only one text node.
=============
<msg>
<text>1234</text>
<text>6789</text>
</msg>
How can this be done using standard PI message mapping functions. Can it be done?
Regards
Willie Hugo

Message mapping - Map 2 source contexts into one target context

Hi,
I have an issue as follows:
Source context 1 (defined as 1.....unbounded)
Source context 2 (defined as 1.....unbounded)
Target context 1 (defined as 1.....unbounded)
I need to map both source contexts into the single target contexts.
For example....
Source context 1 has 3 entries
Source context 2 has 2 entries
Target context would have 5 entries in total (Source context 1 and Source context 2)
I have only limited knowledge of working with multiple contexts so need a bit of advice.
Can someone provide an easy way to do this ? I'm sure there is.
Cheers
Colin.

The answer is quite simple.
Right-click on the target node in the mapping editor and select the option "duplicate subtree".
You will then have two destination nodes.
Now you can map source1 to target1 and source2 to target2

Message Mapping from flat XML to a Record structure

Hi All,
We have a scenario in which the input message is a PDF document. we are following below the blog to convert PDF to XML format which uses PDF box utitlity.
/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter
We are able to convert the PDF doc to a flat XML file.
Now we have the following queries...
what are the different ways to map the flat XML to our record structure?
Do we have any utitlity in PDF box to do that?
Regards,
Rakesh.

Hi Rakesh,
You have Graphical mapping, Java mapping, ABAP mapping and XSLT mapping. The choice depends on the scenario and what target result you require.
Message mapping using graphical mapping editor:
http://help.sap.com/saphelp_nw04/helpdata/en/49/1ebc6111ea2f45a9946c702b685299/frameset.htm
XSLT mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
Java Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
ABAP mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/frameset.htm
As said earlier, graphical mapping is the simplest and quite a few built in options are available with it, explore it and see which is suitable for your scenario.
Regards,
Chandra

Getting error while mapping fields btween DS and Data target IO

Hi,
I am getting error message "Rule(target field:0DEL_GR_WT): No source units assigned" while activating transfer rules btween Data source and Data target.
Infoobject has got mapped with source field BRGEW.
Even in the data source the field units are GEWEI
In BI the units are 0unit_of_wt.
Every thing seems to be fine,but while mapping fiellds in the transfermation i am getting above error

Hi,
I think u have to assign source unit in transformation .
double click on that particular filed and it will take you to other screen and there you have choose that field and have to assign,
if am wrong please ignore it.
Thanks,
Jack

Mapping Multiple Source fields to Single Target Fields with differnt Values

Hello Friends,
I am having a senario where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
E.g Source Str.
- ShopNO
- OrderTyp
Has to mapped to Idoc Str E1EDK14-Orgid.
E.g Mapping:
So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
Regards,

Hi Ravi,
Thanks for your reply....
I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
Any suggestion ?
in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
Regards,
Edited by: Shah H on Oct 26, 2009 3:17 PM

Mapping multiple source value to one target value in value mapping

Hello experts,
In my scenario, i need to map more than one source value to one target value in value mapping. Like:
1 TenderPickup
2 TenderLoan
7 TenderPickup
101 TenderPickup
102 TenderLoan
107 TenderPickup
But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
But this should logically be allowed. How can this be done. Please provide a solution.
Thanks,
Yash

Hi Prabhu,
When i right click on the target field, it gives me only 3 options:
1) Insert Row
2) Delete Value Mapping
3) Value Mapping in all agencies
I dont see nay option for duplicating rows.
What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
Please point out where i m going wrong.
Thanks,
Yash

Source patching and track targeting, What is it mainly used for?

Im reading adobe premier pro cc in a classroom book, and I still dont understand what source track and target track mean, or atleast what they are mainly used for.
Why do people use it?
In what work scenario is it mainly used in?

ShooterNZ is right as far as Source Patching. It's intended chiefly for controlling which track(s) a clip lands on when inserted via shortcut, although it also affects behavior when dragging content to the timelines.
Track targetting controls the Timeline's behavior for a variety of editing and selection actions. For example, the shortcut D selects one or more clips at the playhead. Try parking the playhead over two or more clips stacked in the Timeline, then target various combinations of tracks and see what happens when you press "D."

Graphical message mapping examples for JDBC and RFC lookup

hi, can any body provide me graphical message mapping examples for the "JDBC Lookup" function and "RFC Lookup" function?
I'm now studying the graphical message mapping and want to try those 2 functions. thank you.
I expect the examples to be simple enoung, not need to set up much.

>
Madhu_1980 wrote:
> can u check this link:
>
> PI 7.0 & 7.1 Mapping - Blogs,Articles,Wiki,Code Samples and Videos Collections https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=79955426
>
> it contains a link : SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups /people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
May be I'm too foolish to follow those links, I got issues of each links.
What I really want is an example from step0
Swarup:
Refer the Lookup document - Easy Lookup in Process Integration 7.1
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457
The first step is "Create an RFC Enabled Function Module for look up", but where can I create the function module? Should I use ESB, IB? or use transaction 'SE11' ?
Kulkarni:
Very good links for RFC lookup with 7.0/3.0
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d90a91-3cf4-2a10-d189-bfd37d9c3231&overridelayout=true
At page6 "PI Development/Configuration", it saies "You are on the design maintenance screen in the Integration Builder.Expand the subnodes for the software component version for which you want to import interfaces".
What is "design maintenance screen" ? My IB version is: Service Pack:08 Release:NW07_08_REL.
When I open IB, it display a screen titled with "Configuration: Intergation Builder", I did not find "software component version" node on the left tree.
Madhu_1980 :
it contains a link : SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups /people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
The Prerequisites state:
The JDBC channel to be used for the lookup must be configured and activated in the Integration Directory.
The definition of the table used for the lookup must already be imported into the ES Repository as an external definition
But I don't know how to create a JDBC channel and define the table.

Issue-Mapping Multiple Source Occurence to Single Target Occurence

Hi Gurus,
I have a requirement where the source has occurence 0 to 4 where as the target has occurence 1 to 1 .
Let the source segment be S where the child elements for S are S1 and S2 .
S1 takes the values 1 , 2 & 3 .
S2 takes the values X , Y & Z .
I need to map S2 to target field T1 if and only if S1 has the value "2" .
How can we achieve this ? I tried using the node functions but couldn't achive as i want the 2nd value of S2 from the given set of values ( X , Y & Z ) .
Please help me out in this issue.
Thanks in advance .
Regards,
Sarat

Hi,
You can use this mapping:
S1 --> removeContext --> equalsS --> ifWithoutElse --> removeContext (used to remove suppressed values) --> T1
constant: 2 -
> / ____________/
S2 > removeContext--
> /
Hope this helps,
Edited by: Mark Dihiansan on Nov 11, 2009 1:44 PM

Message mapping---1 source structure and n target structures

Similar Messages

Maybe you are looking for