After System Restore windows programs not loading, and other issues!

To preface this I have no interest in keeping vista on here I have a CD with windows7 setup on it that I would like to install either on a new partition or over the exsisting one but no clue how to do this right, and when I tried booting up from the CD it gave me an error, so I can't do the setup that way, however I did get a version of windows xp (hiren's minixp) to boot from a thumbdrive, however I could not get my wireless internet to work on it. however thru ethernet it did, but need wifi!) I need a computer for tomorrow morning for my new job orientation is done thru a website and I need a computer to use at thehotel (im out of town) so its not an option taking it to a repair shop tomorrow (its sunday and all), or sending back to lenovo plus its outta warranty.
Help! I am very novice at best with techy stuff so I will try to explain this the best that I can. I've had a lenovo N500 Laptop running Vista Home Edition for a couple years now. It did not come with any recover cd's or anything like that. It was starting to run slow, so I figured I'd do the old trusty Factory Restore and start fresh, always did the trick on other computers I owned with windows. Well I went through the whole process of restoring it, and did the initial system setup and naming. When it loaded my desktop for the first time it was all downhill from there. There is no IE installed, no default programs would open, instead I got this error message (example when opening Windows Mail).
C:\Program Files\Windows Mail\WinMail.exe
The specified path does not exsist.
Check the patch, and then try again.
It does this for every program. Here's the thing the only C:\ Drive that shows up is assigned to removable disk. Here are the current labels for my default Drives.
Lenovo(Q
ServiceV003(S
SW_Preload(D
So I think the issues possibly that when it was reformatted it labeled the drive a different letter, so it's trying to pull the files from the C drive as a path,. but it needs to be q or s or d or something. Keep in mind this is my very novice theory.

for wireless issue:
have you checked device managemer for unknown/non-installed devices? you may need to install drivers for your adapters.
try to press f8 when you see lenovo logo, then load "safe mode with networking", check if the adapters work.
can you tell us what error you got when you tried to install win7? also, some of applications doesn't come with preloaded systems so you need to install them later ( as windows mail, msn messenger )

Similar Messages

Structured framemaker window does not maximize and other issues

Dear All,
My questions concerns the use of FM11 & FM12 in Structured FrameMaker mode under Windows 8.1.
When FM is started in Structured mode I find that the FrameMaker window is a fraction of the size that it was when operating in Unstructured mode. When the FM (structured) window is maximized instead of the window occupying the full screen as expected it occupies only about 2/3 of the screen. The receptors of dialog buttons (e.g. the OK and CANCEL buttons) are not at the locations of the on screen drawings of the buttons. In short, the Structured FrameMaker interface is not functional. And to be clear the interface of the Unstructured version of the program works in the expected manner.
My reason for operating with Structured FrameMaker in the first place is to workaround a very serious deficiency in the Unstructured version of the program in which attempting to print a book to the Adobe PDF virtual printer causes FrameMaker to crash. Another gripe with FrameMaker is that the Save As PDF file option fails to properly render the document - typically incorrect fonts are used in the output PDF file, equations are clipped, etc. etc. It is this deficiency that means we must print to the Adobe PDF virtual printer.
We are also experiencing intermittent crashing of the program in versions 11 & 12 for no apparent reason whereas previously (version 7, 5.5) the program seemed to be more robust.
Are others experiencing a significant deterioration in the performance of FrameMaker in recent releases? Are you considering changing to a different program? If so, what programs are you considering?
Many thanks,
David.

David,
FYI, the SaveAsPDF route also uses the AdobePDF printer instance, so some of the issues are due to selected output options and Distiller joboptions. Also, both versions (structured and unstructured) use the same output mechanism independent of the interface.
The appearance of the interface is a function of the Workspace selected and any customization done by the user of that interface. You can create your own layouts and save them as required as a custom Workspace.
What did you select when you used the SaveAsPDF - RGB or CMYK? What joboptions file was specified?
Are you using any OTF Pro level or TTF WGL fonts? Is your joboptions file specifying that all fonts be embedded?

After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Hard Disk free space lick after system restore windows 8.1

I did a system restore and after that, the laptop was functioning slowly. I realised that the disk usage was spiking. Later I realised also that I was constanlty loosing free space from my hard disk without downloading anything or any action. I run the windows
performer recorder when the spikes occurs.Link in OneDrive https://onedrive.live.com/redir?resid=26DCEC24336471AC%21106 . Furthermore when the laptop is on idle the disk usage goes to 100%. Task manager shows that most of the usage is from svchost.exe(defragsvc).
(I dont think it is a scheduled act from windows to run defragging at the moment). What could be? Any advice?

Hi,
From your recorder information, we could see these 5 process below take high disk space:
WPRUI.exe
System
vprot.exe
avgui.exe
avgcefrend.exe
Since you run the Windows performance toolkit to trace the log, exclude WPRUI.exe and system. It seems you use AVG product.
I suggest you disable or uninstall them temporarily to check if the disk usage decrease.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Microsoft Office 2008 issues. Help. Excel not opening and other issues!

I converted to Lion on day one. I was able to use Microsoft Office 2008 without problem for days, then, just today, every time I go to open an excel file it opens, closes, then gives me the option of sending error reports to Microsoft. Word opens fine. The program is totally up to date (just did the 12.3 update). I repaired disk permissions, restarted the computer twice. Still, the same things happen. Here is the message I get for the Microsoft Excell Error Report:
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2011-07-25 00:43:45 +0000
Application Name: Microsoft Excel
Application Bundle ID: com.microsoft.Excel
Application Signature: XCEL
Application Version: 12.3.0.110427
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: unknown
Blame Module Version: unknown
Blame Module Offset: unknown
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
OTHER ISSUES
The other thing that happens is that whether on Word or Excel when I click on a file to open it, it keeps trying to open all the recent files from that program intead of *just the ONE* that I want it to open. I also notice on Safari that when I reopen the program it opens ALL the websites I recently visited even though I don't have that checked as a preference... What gives??????????
Any suggestions. I am freakingout here, really need to get into these documents.

Hi there.
This sound awfull like an issue with the resume function in OSX Lion.
This can be adjusted in system settings under general.
See:
http://osxdaily.com/2011/07/18/disable-mac-os-x-lion-resume-window-restore/
Hope this solves your problems.

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

Battery will not charge. and other issues

Well i'm working on a friend of mines notebook, its a n100 model 0768 12u running windows xp. This is the situation so far. First his hard drive had fried so i replaced that and put the o.s. back on it,but now the battery will not charge. also the wireless network card and dvd drive did not work. I had originally thought that they might have fried as well when the hard drive went down. However I looked through the forums here and found that alot of people solved the battery issue simply by replacing the battery i recommended that. He purchased a replacement battery ( not a genuine lenovo battery, don't know if that makes a difference) and when i put it in the dvd drive and the network card started working no problem. But alas the battery still would not charge. the system runs fine without a battery in it, but if i put the battery in it while its running it turns itself off after about 30 seconds of having the battery in. when the system is powered off and i put the battery in the battery lcd in front blinks 5 times orange then nothing for about 30 seconds then 5 more times. maybe thats a trouble code, don't know, looked all oover the forums and couldn't find anything quite like it. any help would be greatly appreciated.
thanks
Steve

Duck3,
Glad that worked for you! Thanks for sharing here.
I saw a weird situation on friend's ThinkPad recently - a replacement battery arrived with a 37% charge (not 100% deliberately as somewhere around 40% is the best for shelf life), but it would not accept a charge. We did a reset by removing the battery & AC and pressing and holding the power button a number of times (some people say 10 times, some two or three times for a count of 5 or 10). This drains residual capacitance.
We plugged back in the battery and AC and it began to charge.
Might be worth a try here before he opens it up ....
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

WRT54G Wireless Setup page won't load and other issues.

Well I have had quite the mess the last 24 hours. I'll start from the beginning and attempt to spell out the issues I am having. I have had this router for 4 years or so and have never had a problem.
I recently purchased a PS3 and started using the wireless feature that it offeres. Well I was having problems staying connected and was running in to IP address conflicts with my laptop. So I thought I would cure that by moving the router to the ps3 and using a wired connection for its internet. So that is what I did and that is when the problems started snowballing!! After I got the router moved and everything set up, all seemed well at first.
Shortly thereafter I realized I was still getting IP conflicts. So i did some research and saw where I could dedicate an address for the ps3 and also change some of the wireless settings on the router homepage. I previously had never password protected my network. I'm in a rural area and there aren't many people around that would be trying to get on it. But I figured since I was there I would rename the network and password protect it and all of that. Well that didn't help either. I was still having problems.
I then did all of the resets. Online, on the unit and also a power cycle. So I was back to square one with the settings at this point. So today I noticed that my connection would go from its norm of 54mbps down to1 and then lose connection. I did the resets and restarts and all of that, to no avail. Then it got to the point where it wouldn't connect at all. I checked the actual connection by connecting my computer directly to the modem and it worked flawlessly. So I know it is a router problem. I also tried using 2 seperate laptops and they both responded the same.
I think part of the issue I had then was that the modem and router were on my entertainment center and weren't very high and were in a shelf. Also, my surround sound receiver does use a wireless connection to 2 of its speakers. I didn't know the proper placement of a router until I had this problem. Now that it is back in its previous location the connection seems to be normal, although once in the last hour I did drop down to 1mbps and have to disconnect and reconnect. But it hasn't happened again so far.
However, I am unable to access the wireless page on the router setup page. I did yesterday but it won't load today. On either computer. So I am unable to change the name of my network or assign a password or change any other wireless setting. And again, I've tried every reset method and it still don't work.
Also, does anyone have any advice on the conflicting IP addresses with the ps3? They sent me an email stating that it may be a port or firewall issue? After doing some online research it seems this particualr router has had a lot of problems getting along with the ps3.
I hope I haven't put in too much information but I was just trying to make sure I had any questions I could think of answered ahead of time. I've tried about every avenue I could already. I tried the chat help and was told I didn't qualify and was sent to the phone assistance who after a half hour realized I didn't qualify for that help either. So, here I am!!! Thanks ahead of time!

Make sure that there is no static IP address on any of your computer. You can assign a static IP address on Play station.
Connect the computer to the router with the Ethernet cable.
Download t he latest firmware from Linksys website and save it on your computer.
Open the setup page of the router. Go to Administration tab and click on Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on your router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Change the MTU size on the router to 1365.
Go to Wireless tab and change the wireless network name and channel to 11. Also change the wireless security settings.

Battery not recognised - and other issues with 867MHz Ti Book

Ok - here`s my story - I wonder if anyone can give me advice
on what to do next.
A week ago I started having trackpad issues with my tibook.
On 2 consecutive mornings the trackpad seemed to have frozen, held down. So that it brought up menus if the mouse was moved over one of the bars at the top of the screen. I wasn`t however, able to `click` on anything. An external
mouse, when plugged in, also didn`t work, though I was able to navigate the display using the keyboard shortcuts.
The first morning this happened, the OS also appeared to reset itself. ie the screen display picture went back to its original state - and all of the applications that i subsequently opened gave me a first time user `welcome` message.However, all of my files/photos/music etc were intact.
When the trackpad was working I backed everything up, ran
the hardware test cd, which came up clear, and called apple. They picked up the computer, which is under
warranty, on Friday, and at the time it was working fine.
I got the computer back yesterday, but unrepaired, and
with a new set of faults. Apple told me that they had checked the computer and had found
some evidence on the logic board, power in and bottom case
of past liquid spillage - but no other problems with the
computer. I don`t deny the liquid spillage ( a few ml of
water), although it
occurred 11 months ago and I have not had any problems with
the computer since 24 hours after the spill.
The state of the computer now that Apple have sent it back
is as follows: The trackpad is working. However, the computer is not recognsing the battery, or the wireless
networking Buffalo pc card. The clock also resets one out
of every 2 or 3 times that I restart the computer. These problems did not occur before I sent the computer to Apple.
Yesterday I erased and reinstalled 10.4 just in case that had
something to do with it - but it has not helped
So - my questions.
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend
a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this
one is coming up for 3 years)?
Thanks,
Antony

Hi Antony,
1. Could my current problems be to do with the spillage
on the logic board 11 months ago?
Yes. Corrosion occurs over time, and it could have taken 11 months to reach "critcal mass."
2. Could my new problems be to do with something that Apple
did when testing the computer this week?
Theoretically, any time anyone does anything inside your PB, they could have caused additional issues, however, this would not be "normal."
3. Is there anything else that I should try in order to solve the issues that I`m having with the computer?
4. If it is a logic board problem, can anyone recommend a UK repair centre that would deal with this cheaply (otherwise i will probably buy a new computer - as this one is coming up for 3 years)?
Before paying for a new LB or a new PB, try a PMU Reset and Test PB Backup Battery.

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

After doing a system restore, Firefox won't load pages.

I restored my laptop a couple of days ago (from a previous date, not a full system restore), now firefox will open to the home page (google), but will not load any other page. It doesn't even bring up the "page won't load" page, it just continually says 'connecting' forever. I also noticed, even when I first open firefox, and it opens the google homepage, it doesn't have google.com in the address bar, it has 'about:home'. Internet explorer seems to be working fine, and my internet connection is fine, so I am not sure what the problem seems to be.

hello rlyslowff, one thing you could try is to remove all program rules for firefox from your firewall/security software and let it detect the program again...
please also [https://www.mozilla.org/en-US/plugincheck/ update your plugins] (some of them are out-dated & have security vulnerabilities that are actively exploited on the web).
in case this didn't solve the issue, go to the firefox ''menu ≡ > help ? > troubleshooting information'', copy the contents of that page and paste them here into a reply on the forum, as this might give us further clues what is going on...

I downloaded version 4.0.1 and it crashed my system- my Norton no longer works and Firefox browser won't open. I did system restore which did not fix it. I tried downloading 4.0.1 again, it freezes when it tries to open "Checking add-on compatibility".

I downloaded version 4.0.1 and it crashed my system, my Norton no longer works and the Mozilla Firefox browser won't open. I did a system restore, which did not fix it. I tried downloading 4.0.1 again, it freezes when it tries to open "Checking add-on compatibility". What the heck is going on??

When I downloaded new stupid version causing crash my system My Norton gone
after 4 h struggling finally I got it back but only protection I lost my identity safe data witch is very important for me my password can not be verify and I can not fix it I'm so mad I want old version back

After System Restore windows programs not loading, and other issues!

Similar Messages

Maybe you are looking for