After uninstalling software for my TM506, I have "unidentified device" problems

After my TM506 stopped working, I finally got around to uninstalling the software for it from my Windows 7 PC.  Now, my internal card reader doesn't work, and device manager says that I have a series of "unidentified device"s.  For each, if I look at Properties/Details in device manager, I see that property "Hardware IDs" has value "rootseehcricdroot\seehcricd".  This appears to have been caused by the uninstall.  What can I do about this?  Windows Update can't find a driver for any of these devices.
Thanks!

Thanks -- this led to a successful resolution.  It was made more difficult by the fact that I could not roll back my drivers, since Win7 Update had installed SP1 in the interim, and I could not locate the drivers manually.  My computer is an HP Pavillion, and on the HP web site I found an article suggesting that instead of just restarting my computer, I should power it down, unplug it, and then press the power key for five seconds before plugging in and restarting.  When I did this (after removing the drivers that the article that you linked to suggested), my computer found and installed the correct drivers.  All is well!
Thanks again.

Similar Messages

  • Trouble after updating software for IPhone

    The last two time i update the software for my iphone it have wiped out half my music and all my photos, without showing any errors. Any advise.

    Hello there, jibblywig.
    When unsuccessful with updating an iOS device, the following Knowledge Base article provides some great initial steps for troubleshooting:
    Resolve iOS update and restore errors in iTunes - Apple Support
    If the issue persists, this article offers some additional steps to try:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help.

    After downloading software for 123Cheese Photobook (Australia), when I try to open the program, i get: "Initialization error... Could not create the application support directory 'Macintosh HD:Library:Application Support:123 Cheese:'. Please help. The MacBook Pro is one day old.
    Thanks

    Hi, Im am also having this same problem,same message, trying to make a photobook with a non-refundable voucher. my Macbook pro is like 2 months old and im up to date with all of my updates.
    What ended up happening with this problem for you because, Ive emailed cheese123 3 times and they haven't replied???
    Can you help me? Thanx

  • I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    Welcome to Apple Support Communities
    The OS X Lion installer takes more than 4 GB of space, so it is normal for most Internet connections to take the download more than an hour.
    If you want to see the download progress, open the Mac App Store and go to Purchases.
    Before upgrading, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

    I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years,
    I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation.  All other synchronisation areas (eg Contacts, Notes etc) work fine.
    I have looked for help through the Apple Support Community and tried many things.  I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
    What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from  my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether.  I need to have a properly synchronising calendar on my phone.  Do you have any suggestions?

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • HELLO! How do I fix this? When I click on imovie "add titles" it closes. I uninstalled the application, to date I have reinstalled, the problem persists, the problem

    HELLO! How do I fix this? When I click on imovie "add titles" it closes.
    I uninstalled the application, to date I have reinstalled, the problem persists, the problem

    Thank you for having responded to me!
    Unfortunately I did already the case "delete preferences" but nothing!
    Also, when crashes do not give me any reports!
    Started in safe mode, with another administrator, the problem becomes even: your video card is not compatible with Quartz Extreme!
    My card is a g-force framework 4000 FOR MAC!!
    STRANGE TRUE!
    If you know something more to this riquardo please answer!
    Thanks Comunity!!

  • Hello.  I am about to migrate over to iCloud.  I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases.   I have 4 devices and my wife has two. Right now they are all using the same mobile me account t

    I don't think I see my situation addressed. I have one mobile me account and a separate appleID for purchases.   I have 4 devices and my wife has two. Right now they are all using the same mobile me account to sync just the calendar and address book.
    1.)  I want to add email syncing for my 4 devices and email syncing for my wife's two devices separately, but we want to sync and share the same calendar and address book.  Is this possible?
    2.)  I also have 5 different calendars, one for work, one for home, one for... etc.  Is there a way to have different devices only sync certain calendars and not others or is it an all or nothing deal?
    Thanks in advance for any tips!
    S

    To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
    To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
    Generally speaking it is not a good idea to share an iCloud account between different people, it often results in contracts, calendars et cetera being deleted by others. Saying that however you can add secondary iCloud accounts to your devices at settings> mail, contacts, calendars. Secondary accounts do not have all the features of a primary account, but are often very useful. Because you can enable or disable each individual feature of an iCloud account, you can cover almost any situation by using secondary accounts.

  • İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

    İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

    Settings>general>reset>reset network settings
    Settings>general>reset>reset all setting

  • Mac Pro stuck on gray screen after installing software for a new keyboard

    I am having a huge issue with my very important work computer! For a few weeks, my Mac has been freezing on the gray screen during start up. Since I had two external hard drives plugged in, I would unplug one of them and the Mac would always restart correctly once one was unplugged. Well today I was installing software for a new keyboard and the mac prompted me to restart. Once I restarted, the gray screen came up again and no matter what I did it would not start up correctly again. I tried unplugging everything except the keyboard and monitor and nothing works. I tried ejecting the crash-causing CD with the keyboard using all of the commands I found on this forum board and nothing worked. I saw forums about manually ejecting the CD by pushing a pin-hole but I cannot find that pinhole anywhere! Then again, the CD might not even be the problem but since the computer gave me the gray screen of death right after using the CD I am thinking that it is the problem. I use this computer for editing a TV show and creating websites so there is a ton of files on it and I need to get it up and running again ASAP. Any suggestions would be appreciated and I am sure by now you can tell that I am not a Mac expert so please dumb it down for me. Thank you!!

    I would start by breaking your thoughts and sentences out from one long paragraph.
    Start at the basics.
    Always have backups.
    One at least that is a spare boot system you can use.
    Clone your system. SuperDuper does a great job for only $29
    Boot from another hard drive or last OS X DVD
    Repair your drive with Apple Disk Utility along with 3rd party disk maintenance and repair
    Hold Option key until the boot manager, then hold mouse to open optical drive.
    You can hold mouse on startup and it will eject also.
    Hold and continue to hold Shift key during startup to repair the boot drive in minimal fashion.
    What device and driver? hint: never use CD, just go online as the CD is usually out of date anyway.
    Fill in Mac OS X version and more about hardware would help in posts and in your profile signature.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    http://www.macintouch.com/readerreports/harddrives/index.html#d12aug2010
    http://www.alsoft.com/DiskWarrior

  • Cannot uninstall software for HP7130xi

    I replaced this printer with HPOfficejet Pro 8500A Plus several uears ago. However, I did not remove the software for the 7130. Starting this year, I began getting an error message about TWAIN???? associated with the 7130. I tried to uninstall it but it keeps telling me to turn off the device. I went to Device Manager and deleted it but the message remains. How do I turn off the device so I can uninstall the program?

    Hi @julynsh,
    Welcome to the HP Forums!
    I noticed that you are unable to uninstall the software for your HP Officejet 7130xi. I am happy to help!
    I would recommend this guide, Uninstalling the Printer Software. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.  
    Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

    My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

    Eek.  Sounds like something in the app caused some serious software issues.  You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

  • What is the best Book Cataloguing software for iMac. I have about 5000 books I would like to bar-code scan into my iMac. Thanks

    What is the best software for cataloguing a large book collection into my iMAc. I would like to use a hand-held scanner, and scan bar codes, entering ISBN numbers only when necessary. Currently using Book Collector (www.collectorz.com) on a PC. desktop

    I did something similar and used an application for my phone (Android OS at the time), which I can't recall the name of, to bulk scan the bar codes and subsequently upload the list to my mac in the form of an excel spreadsheet (it was a csv file). When I migrated to an iPhone, the application "Bar code scanner" performed in the same manner. Using my phone was by far the easiest method of bulk scanning (and subsequently cataloguing on my machine) in both instances.

  • TS1424 Getting error -1202 when trying to connect to My Wish List.  Says there was an error in the ITunes store and to try again later.  Any work arounds for this?  I have no other problems accessing anything else.

    Getting error -1202 when trying to connect to 'My Wish List" in ITurnes.  Says there was an error in the ITunes store and to try again later.  Have no other problems connecting or purchasing......

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen L*/Coo* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • My screen saver has become to large for the screen. i have had this problem before and just reset the ipad. This time it hasnt worked

    i have a 3yr old ipad. it is ios8. the newest operating system. my problem is the screen saver will not downsize. it is to big for the screen. i have used my fingers to pinch the screen smaller but it douesnt work. in the past if i shut it off and press the bottom centre button it resets the ipad. that isnt working now.

    I just did that and everything looked ok.  I do notice however when I open up my calendar off to the left hand side where all the calendars are listed there is a triangle with a exclamation mark in the middle of it.  When I clicked on it a window, just like the one that has been popping up, opens and it gives the same message.  "server resoponded with an error" and it lists a various event and gives the choice to go offline, or revert to server.  I have to choose go offline in order to get the window to close.  Any idea what is happening?

  • Firefox will not open in Vista SP2 after installing software for a Brother MFC printer.

    I have 7 computer network. All the machines are running Vista SP2. I recently purchased a Brother MFC 9325cw, and installed the printer/scanner drivers as well as a program called scansoft paperport on each of the machines individually.
    I left out the some of the bulkier aspects of the driver package, namely the brother control center because it seems to eat up a lot ram at start up.
    Since I have installed the printer driver on my computers, several of them will not open firefox.
    I have tried re-installing firefox on one machine so far to no avail.
    Next I will try to re-install the brother software. Has anyone else encountered this problem before?

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Maybe you are looking for