After update IOS from 6.0 to 7.1, my Apple Id cannot access to my Iphone due to the Apple ID that comment on IOS 7.0.2 was not matched to the old one.

I have gotten the problem after updated IOS to version 7.0.2. I signed up my IPhone with su* @pttplc.com as Apple ID via older IOS version and can use it normally but after I update the IOS version from 6.0 to 7.0.2, the Apple ID that commented on my IPhone is sx* @pxxxxx.com. It look like that the number of alphabet in Apple Id is not matched. The new one is less than the old one so I cannot log in my IPhone. After that I try asking for the new password but the new password was not send to su* @pttplc.com but send to my reserve e-mail instead. Please help me to fix the problem ASAP due to I cannot access IPhone for 2 month already.
Please suggest the solution to reset my IPhone to normal. Please advise ASAP. Thanks in advance.
PS. If you want any further information, please do not hesitate to let me know.
<Email Edited by Host>

Hey Suwat Chanpui,
Thanks for the question. I understand you are having issue relating to your Apple ID account after updating to iOS 7. The following articles may help to resolve your issue:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
If you recently changed your Apple ID and did not update your Apple ID on your device:
1. Tap Skip This Step to continue.
2. After completing iOS 7 setup, go to Settings > iCloud.
3. Scroll down and tap Delete Account, then enter your previous Apple ID and password.
4. If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
https://support.apple.com/kb/TS5223
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Tap Settings > iCloud and try to sign out.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Tap Settings > iCloud and sign in with the new Apple ID.
If you are instead experiencing issues with Activation Lock, the following articles may help to resolve your issue:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Thanks,
Matt M.

Similar Messages

I am having the same problem that Paul Birgy is having. It was working fine until the update.

I am having the same problem that Paul Birgy is having.   I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.

I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it.   It was all working fine until the last update for adobe reader.
Now they get error message.   Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
>

An error has occurred:Item SI_XSLT_INFO was not found in the collection

I am trying to schedule a report in BO XI R3. But I get the below error when I click on the format link.
An error has occurred:Item SI_XSLT_INFO was not found in the collection.
Any ideas?
Thanks

I encountered this same problem. When going from XI R2 to XI R3, I had imported all the reports so converted to CR2008. One of the users had a version of this report on his desktop from XI. He saved it out to BOE XI R3 and then when trying to select format from Infoview when he was scheduling it, he would get this error message. I just opened this report in CR2008 and then saved it back out to BOE and it worked fine.

Why the doc total amount is not matched with the total item line amount?

Hi,
Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components. [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
Has anyone experienced similar situation like mine and how this happens?
Thanks,
Lan

I am having this same issue and I have additional information.
I am on ver. 8.8 PL 16.
Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update. Most of the time this does not work, though. I end up having to restart the SAP client and then everything begins to work as it should.
This behavior is occuring on mulitple machines in our office.
Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem. In fact, we were having issues with Currency Rounding and did turn it off not long ago. Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
Randy Davis
Denver, CO
Edited by: Randy Davis on May 16, 2011 2:01 PM

Ever since I downloaded the latest version of firefox..is running slower, I am not really liking the new format, is there anyway to go back to the old one?

Ever since I downloaded the latest version of firefox..is running slower, I am not really liking the new format, is there anyway to go back to the old one?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*https://support.mozilla.com/kb/common-questions-after-upgrading-firefox-36
*https://support.mozilla.com/kb/how-do-i-get-firefox-button
*https://support.mozilla.com/kb/why-are-tabs-top

Iphone 4 factory unlocked turned to locked after updating software from 4.3 to 4.3.3, any help?

Iphone 4 factory unlocked turned to locked after updating software from 4.3 to 4.3.3, any help?

the store dosnt unlock the phones ,they buy and sell refurbished phones. when I got THE phone the ios on it was 4.1.2. . It seems they have not used this phone .I called apple techincal suppor.the said it has hardware problem !

I have most of my music stored on my old iphone. i bought a new I pad, and signed up with a new e mail adress as my old one is defunct. How do i change my e mail adress to the new one, because it keeps telling me apple id already in use.

I have most of my music stored on my old iphone. i bought a new I pad, and signed up with a new e mail adress as my old one is defunct. How do i change my e mail adress to the new one, because it keeps telling me apple id already in use.

You can change the primary email address on an account by logging into it via the 'manage your apple id' button on http://appleid.apple.com, or via the Store > View Account menu option on your computer's iTunes, or by tapping on it in Settings > iTunes & App Store on your phone and logging into it.
You won't be able to change it to an email address that is being used an alternate or rescue email address on the account (they can be viewed/changed/removed via http://appleid.apple.com), nor to one that is currently being used as the primary email address on an account

App crash when after update app. from App Store

Hi all,
I have some issue when after update app from App Store.
The issue happened since I registered the last update recently.
Here are the logs from iPhone console:
Jun 28 18:15:45 Rahul-Singhs-iPad backboardd[27] <Warning>: Application 'UIKitApplication:com.tabsfmiPad.tabsBi[0xb917]' exited abnormally with signal 11: Segmentation fault: 11
Jun 28 18:15:45 Rahul-Singhs-iPad ReportCrash[163] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jun 28 18:15:45 Rahul-Singhs-iPad ReportCrash[163] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/TabsBi_2013-06-28-181544_Rahul-Singhs-iP ad.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0

Try resetting your iPad > iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
If that doesn't help, restore to factory settings.
Tap Settings > General > Reset > Reset All Settings

After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
"Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
to reimport edited photos back into my iPhoto library? Ideas?

Launch PSE Expert Mode and go to:
Photoshop Elements Editor >> Preferences >> Saving Files (tab)
Set the drop-down dialog
On First Save : Save Over Current File
Click OK.
When you have finished editing in PSE use Cmd+S to save (not Save As)

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

Tp return code 12 after update oracle from 9.2.0.4 to 9.2.0.8

Hi
tp return code 12 after update oracle from 9.2.0.4 to 9.2.0.8
Please help me.
Thank you

Hi Maurizio,
What does the transport logs says about the error?
-Pinkle

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

I've got a payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer styl

i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.

Contact your carrier & get a new sim...they should give you one for free.

After update IOS from 6.0 to 7.1, my Apple Id cannot access to my Iphone due to the Apple ID that comment on IOS 7.0.2 was not matched to the old one.

Similar Messages

Maybe you are looking for