After update udev mounts all partitions automatically (but shoudn`t)

Here goes: after updating udev from 167-2 to 168-1, it started mounting all partition at boot. No rules (the list and the rules are the default ones) seem to include this, and google said automounting MUST be set up by user.
Downgrading fixes the issue, but I try to keep the system up to date, so this is not an option. Also I do not want to disable udisk mounting by polkit, since I want to keep the option of mounting them via KDE.
Can anyone help please?
P.S. arch x68_64
Last edited by levantis (2011-05-17 16:05:35)

same here...
i changed the 'pass' value in the /etc/fstab to "0" for the mounted devices - this works temporarily for me so i can boot up the system.
excuse me for my bad english

Similar Messages

  • Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial to balance inquiry ( as *124

    Hi,i have iphone 4S, after updating ios 7, all functions are ok but i can't see my balence because when i dial for  balance inquiry ( as *124#) it does not respond or even say that this number is not in use. How can i sort out this problem?

    Yes lucky me . If all troubleshooting has been done in Resolve iOS update and restore errors and if you have at least taken it into a store where they could try a restore themselves then that would suggest a hardware fault with the iPhone.
    If you are out of warranty then it is correct that they would quote you an out of warranty service fee. From here it would be a matter of trying the steps above and if you have already tried then doing the service when you do have the cash.

  • I am trying to purchase an app and update my apps all are free but it won't accept my security code, all itkeeps saying is that my payment method has been declined, I only have one card so can't try another

    I am trying to purchase an app and update my apps all are free but it won't accept my card, all it keeps saying is that my payment method has been declined, I only have one card so can't try another. Now I can't use some of my apps because they are waiting to be updated. Somebody please help!!

    Hello Sriggers,
    Welcome to the Apple Support Communities!
    I understand that you are attempting to update some applications on your iPhone but the payment method was declined. In this situation, I would recommend reading over the information in the attached article to help resolve the situation. 
    Pay an unpaid balance in the iTunes Store - Apple Support
    Best,
    Joe

  • After updating my phone, all my old emails in the sent folder are gone. Can I retrieve them?

    After updating my phone, all my old emails in the sent folder are gone. Can I retrieve them?

    Try a reset by pressing and holding the home and power buttons until the white Apple logo appears.
    If the issue persists, delete the email account then add it back.

  • How to mount all partitions?

    What command (with paramenters) would you use to mount all partitions specified in the /etc/fstab?

    I wonder what happens when one types
    man fstab
    on the command line? (or in the Google 'search box')
    Oh my ... online help. With answers to basic questions. And a 'See also' section that leads people to additional information such as commands and file formats and other information.
    Interestingly there is even a response to 'man man' to help understand how to use the pages of the online manual.
    Frank - you will tend to get sarcastic responses unless you demonstrate that you have attempted to find the answer yourself. A good place to look for answers at your level is at the http://www.linuxlinks.com/Beginners/ portal.
    You will also find books like http://www.oreilly.com/catalog/lpicertnut2/ helpful. I know you can get it at Amazon and http://toronto.ibegin.com/retail/worlds-biggest-bookstore
    The question sounds like it came right out of a self study book ... which exam are you studying for?

  • After updating my itunes, its saying syncronising but it its not updating my nano?

    After updating my itunes, its saying syncronising but it its not updating my nano? The old tunes are their and wont add or delete anything?

    Activation issues are typically the result of a device that has been hacked or jailbroken.
    If that is the case, no support can be provided here.

  • After updating my ios, all my apps have disappeared

    after updating my ios, all my apps have disappeared

    Were they on your computer's iTunes when you started the update ?
    As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519 . If you download them to your computer's iTunes you could then try restoring to your backup and see if that restores them and their settings/content - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.

  • After update my imac to yosemite automatically power off ifself.pls help

    hi friends , I updated my imac (24-inch,Early 2009) to yosemite and update was ok.after update i restart imac  then it is booting and showing apple log and coming to password page then automatically power off ifself. if i start with safe mode it is working fine. can everyone help me.

    Hi.
    You are running into a problem that many users of the 24-inch, early 2009 iMac 9,1's have encountered (including me).  The Sudden Shutdown Syndrome is the scourge of many iMacs and Mac Book Pros.
    Unfortunately, I believe that the only solution is for Apple/nVidia to revisit their geForce Tesla drivers and figure out if the power management is correct.
    In your case, I'd try this:
    1)  Boot up your computer in safe mode and log into your user account.
    2)  In the Finder menu, select Go > Go to Folder...
    3)  Type: " ~/Library/Caches" (without quotes) into the box and press return.  You will be taken to the Caches folder.
    4)   Select all the files in the folder and move to the trash (do not trash the folder itself).  At this point, just leave them in the trash...don't erase them.
    5)  Go back to the Finder menu, select Go > Go to Folder...
    6)  Type: "/Library/Caches" (without quotes) into the box and press return.
    7)  Do the same thing you did in 4)  This time, though, you will be asked for an administrator's password.
    8)  Restart your computer in normal mode and attempt login.
    9)  If you can log to the desktop, you may delete your trash.
    Hopefully this will get you into your account.  If it doesn't, you may have to do a clean install of Yosemite, go back to Mavericks, or wait for an update.
    Good luck!

  • After updating my software, all of my default keyboard commands appear to have changed to PC commands. Any one else have this happen and how would I resolve?

    After updating my Premiere Pro 2014 (CC), all of the default keyboard commands have changed.  They appear to be PC commands instead of Mac.

    You're all most welcome, <edited by host - see the [Terms of Use|http://discussions.apple.com/help.jspa#terms], section 4.2.2>.
    Happy New Year

  • Photoshop CS 5 crashes after updating and then using File -- Automate -- Batch

    I am running Photoshop CS5 (build 12.0.4 x32) on my XP 32-bit machine and have done so without major problems until about a week ago.
    Then all of a sudden when accessing File --> Automate --> Batch the program crashes and I have to force it shutting down manually after which I can restart Photoshop. When trying to access the batch command hereafter the same crash reappears rendering batch commands useless.
    I thought about posting here but then decided to reinstall Photoshop again. This enables the fully working software including batch commands once again. However after a short while the update software asks to download and install some patches for all programs. After doing so the same problem happens again in regards to the batch command. Photoshop crashes when accessing it and won't work at all.
    I now repeated this procedure twice and have no idea what to do about it.
    Is there anybody that has had this experience or knows about a solution?
    Do I have to contact Adobe with an error report?
    Any help and comment is welcome and mostly appreciated.

    Chris Cox wrote:
    Yes, a change in the Adobe update made the existing scanner bug show up more frequently.   No, that does not make your statement correct. The bug exists in the scanner driver, and existed before the Adobe update.
    The Adobe update is not the cause of the bug, it just made some unrelated change that made the bug appear more frequently.  That could be something as simple as putting different values in different locations of memory.  We don't know. Only the authors of the scanner driver can know for sure why it is crashing more often now.
    Photoshop supports the TWAIN standard, but cannot be responsible for the bugs in the third party drivers that attempt to implement that standard.
    The high frequency of bugs in TWAIN drivers is what made us move the TWAIN plugin to "optional" status in the first place -- because too many people were crashing, had a hard time figuring out the cause, and blamed Adobe for something completely beyond our control.
    And we already do inform scanner vendors about all the bugs we find in their drivers. But we cannot force them to fix their bugs, nor can we know the nature of all of their bugs to code around them.
    I understand that you're angry.  But please stop trying to blame an innocent bystander.
    Adobe cannot do anything to fix the bugs in your scanner driver. Only the authors of your scanner driver can fix the bugs in your scanner driver.
    Until they provide an update to fix the bugs in the driver, your choices are to keep crashing, or not use that buggy scanner driver.
    I am going to make this short.
    It depends on how you look at it. From your angle, Adobe did their's and the scanner companies are to blame for their buggy software. What you are saying here would be - if compared - resemble a situation where you would go to a car dealer, buy a car, then drive away just to find that the trailer tow hitch you attached your old trailer to would keep falling off all the time. When confronting the dealer about the issue he would reply to you that you have to talk to the manufacturer of the trailer because the problem is their responsibility. How would you as a client react...?
    Maybe it is true that the driver software is buggy. However it still did work though under other conditions before this update. That means that you updated something that made these things appear frequently. Maybe you don't know and only they do. Fair enough. But us customers don't have to work these problems out or live with them nor do we have to use our time on posting and fixing companies' errors and mistakes. That's what we pay you for. We only need to use this application hassle free on the spot. Maybe you should start crash testing in an controlled environment before you apply these updates and then post them. Or make a deal with those companies to do so for you. Maybe they will then ignore you or won't tell you about possible bugs to hike their own skin. Fair enough as well. Create some sort of program, a label or whatever that you apply and hand out only to those companies that are "certified by and working with Adobe software" and that they can put on their products or you on your very own Adobe website for all us customers to see and to use as a type of guidance in order to have working hardware and applications and avoid these errors.
    There is this saying that goes...
    "Where there's a will, there's a way"...!

  • After update Udev rule ignored: loading firmware of HP LJ 1020

    Hi all
    After one of the latest updates I have a problem with the udev rules. It worked some weeks ago perfectly. But after some updates of the past weeks it seems, that the rules in /etcudev/rules.d/11-hp-lj1020.rules are not triggered anymore. I cannot tell you the precise date as I update my mom's computer via ssh from another country and my mom told me weeks after that the printer is not working any more.
    Was there any update of the udev package which is causing problems?
    I read some threads and had also the problem, that renaming my network adapters does not work any more.
    Issue was that "name" is deprecated in udev.
    Best regards
    Martin

    Potomac wrote:
    check these bugreports :
    https://bugs.archlinux.org/task/42505
    https://bugs.archlinux.org/task/42353
    it seems that this bug related to i915 chip ( or intel graphic card ) is fixed in kernel 3.18rc3 mainline ( we can find this kernel package in AUR )
    there is also another and complete different bug when we use a kernel 3.17 and even 3.18 ( it's a random bug ) but with a similar effect : boot can hang ( the boot process suddenly stops ) :
    https://bbs.archlinux.org/viewtopic.php?id=189622
    https://bbs.archlinux.org/viewtopic.php?id=189324
    downgrading to kernel 3.16.x is the workaround
    I assume my computer is affected by one of these bugs. While I can get to the point where my window manager is loaded, everything almost immediately hangs (but doesn't freeze). Terminal windows become non-responsive and Chromium will refuse input. It's very weird. This happens with both of the 3.17 kernel updates but not in any of the 3.16 releases (including 3.16.7).
    This is on an AMD system (cpu/gpu w/ open source driver). Overall 3.17 seems rather buggy.

  • After update to iOS4, all apps in 3G exit immediately after launch.

    I updated my iPhone 3G to iOS4, and after that all apps cannot run. apps exit immediately whey I run it.
    Accept the default apps that come with iPhone (e.g. calender, clock, claculator, contact, ect).
    What should I do to resolve this problem?

    I think I have the solution. I crfeated new ringtones yesterdya by converting them to aac files, then changing the extension to .m4r and dragging them to itunes. I also had a missing icon next to the custom ringtones. The only ringtones that would sync to my iphone are the 2 that I purchased. I tried to play the customer ringtones and windows told me they cannot be played because the original file cannot be located, would you like to locate it? I clicked yes and searched my desktop. I had saved all the ringtones to a file on my desktop so i knew easily where to find them. I clicked the file for the ringtone I had tried to play, clicked on open and it began playing. the missing icon was now gone in itunes. Windows then asked if I wanted it to search the same location for other missing files. I clicked yes and all of my newly made ringtones now will play. I re-synced my phone and they now appear in my ringtones on my iphone. hope this works for you.

  • HT1386 After updating my iPad all my albums seam to have vanished ?how do I get them back

    I updated to iOS 7.1 on my iPad mini retainer ,when I went to see my music not all my albums were there all my Beatles albums had. Gone and johny cash ones too I did a backup but that doesn't seem to work either can any one help me ? 

    Fist, Verify the Drive in Disk Utility, if OK then...
    I'd get EasyFind...
    http://www.macupdate.com/info.php/id/11076
    Here's a direct download link to EasyFind 4.0 which runs in 10.3.9 & up...
    http://www.devon-technologies.com/files/legacy/macosx1039/EasyFind.dmg.zip
    From this page,
    http://www.devon-technologies.com/support/faqs.php?p=default&cat=19
    Freeware applications:
        * EasyFind 4.0
        * PhotoStickies 5.6
        * ThumbsUp 4.3
        * XMenu 1.8
    http://www.versiontracker.com/dyn/moreinfo/macosx/8707
    Use it to search your whole drive for case insensitive & show invisibles...
    .emlx
    (dot ee em el ex)
    Find Any File...
    http://apps.tempel.org/FindAnyFile/
    Hold Option or alt key when selecting Find to Find All.

  • Mac - after updating creative cloud, all apps have disappeared from "apps" and attempts to install hang for long time.

    I recently updated the Creative Cloud app, and suddenly I get a message that I have not yet downloaded any apps. They are all right there in my applications folder, but not in my CC desktop app. When I attempt to install any app, it hangs at 40 or 42% forever..... Please help.

    Thanks for your response, John,
    I'm not sure what browsers and firewall have to do with this issue. I have been using Creative Cloud as a desktop app since first subscribing to the Adobe Creative Cloud, and downloaded all of the apps that I use on a daily basis way back then. The only change between seeing all of my apps and not seeing any of them was updating the actual Creative Cloud app itself. There were no other changes. Here is a screen shot of what I saw when attempting to update Acrobat. Below that are two screen shots that may be a signal that my Creative Cloud app is corrupt. Please let me know how to proceed.
    This hung at 42% for about half an hour....
    This seems quite odd....
    InDesign seems normal...

  • I keep getting the " firefox is up to date " screen after updating, it usually only occurs once , but i can't get rid of it.

    Every time i access the net two screens come up, one with my home site and the other with "Firefox is up to date", usually the later disappears after the first use, but it now stays there every time i try to use the net

    Thank you for your assistance. It was a corrupted preference file and your post resolved my problem. I have had a number of problems with preference file under lion.

Maybe you are looking for