After upgrade can no longer connect to Mac from Windows

I have a wireless network (Linksys) with 2 iMacs, Ubuntu Linux and Windows XP workstations. I have file sharing between the Windows and Mac computers. After upgrading I can no longer see the shared folders on the upgraded iMac from the Windows box. I cannot even ping the iMac by node name, but I can ping it by IP address so it is recognizable on the network. I cannot connect by IP address, however.
I have file and printer sharing enabled on the Leopard iMac. What can I do to restore the former connection?

Thank you! That partially solved the problem. I can now see the Leopard Mac and can open my user folder on it. However, the subfolders give an error saying they are not accessible - permission denied. I have gone through the folders and set all of them to Shared, but this did not make them accessible.

Similar Messages

Help! My Sony Ericsson T715A can no longer connect to my PC (Windows 7) in phone mode...

Sony Ericsson T715A: I can no longer connect in to my PC (Windows 7) in phone mode; so I can no longer sync contax, calendar, tasks etc. with MS Office Outlook. Also cannot back up phone, or
update software. Can only drag files out into Explorer folders. When I connect the phone, it has to be on. Instead of going right to phone/PC mode, I get a message on it saying "Phone functions are
not available in File Manager mode. Continue?" I say yes, whereupon the phone seems to restart, & then the Microsoft Autoplay folder comes up, or else I can find it in "devices and printers." R-
click the icon, "properties" Identifies it only as a generic Microsoft device. I tried running the computer troubleshooter on it, which came up w/nothing.
    After some period of time I will notice that the phone either rings and I can answer it, or it has stopped recharging, and the icon has disappeared from the PC.
    I had the 2007 version of PC Suite and PC Companion, and when I tried to install it on my 2010 PC w/ Windows 7 it said not compatible. I downloaded an update for that software from the SE site, but it didn't help. Then I ran the compatibility wizard in Windows 7 for PC Suite. Still no luck. I got a tip from an SE forum to uninstall all that software and download a certain package and start fresh. I am about to try that.
    Here is my question:
ALL T HIS TIME I have still been using the OLD SIM card from my SE ZZ710i in the newer phone. I figured it works; why not preserve the newer one from wear & tear as long as poss.
Now, it has been a while since I synched or backed up my phone. I hate to lose everything on it/the SIM card. If I install a whole new version of SE PC Suite, is it going to somehow overwrite or not work at all with my
old SIM card? Must I insert the NEW SIM 1st, & sacrifice whatever data is on the old one, before trying the new desktop software and updateing the phone?
As for updating the phone, which I realize wipes out data, it might be necessary.. I noticed in some Event log or other that some SE-related working file called EMMA was deleted recently, I don't know why. Anyone know anything about that?
Phew. The End. Here's hoping.
Message was edited by: Andifox

Dr Chris:
Thanx for answering my Q of a month ago. As you can see from my post of 18 minutes ago, things have gone from bad to worse under my neglectful eye.
To answer your answer:
a. I WAS using a NEW USB cord when I posed the question.
b. I've now downloaded the update service. I can try updating the phone from its File manager state. I'm just afraid whatever data is on it will get wiped, no?
Point of order:
If I've had an answer - or more than 1- to my question, but I still need to discuss it- should I Check the "Yes my question has been answered" box? I did not, here, because I thought it might result in my further questions dropping off the radar for forum experts. Please advise... \\Butter F

Connect to Mac from Windows

I have three Windows systems and one Mac.
Currently, to connect to my Mac (OSX Tiger) from Windows I have to be logged into the Mac as that user on the Windows machine.
I have three users that access the Mac. All are setup on the Mac as users. All are setup on the Windows systems as users.
But if John logs into the Mac and Betty tries to access the Mac from her computer she cannot. If John tries to access the Mac from his Windows system he can.
Does anyone know how to setup the Mac so that any of the three users can connect to it from Windows regardless of who is logged in?
I tried to set the group to staff for all the users public folders but that did not help.

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

Connect to Mac from Windows Vista issue

Hi I want to view some files that are on my Mac from my PC (Windows Vista). Here's what I did so far: On my Mac I enabled file sharing, I selected the folders that I want to share.
Now here's the part that confuses me, it asks me to add the users to share the folder with. but do I enter the username and password for my mac or is it the username and password for my PC? What I did was add all the accounts that are on my mac.
I then went on my PC, clicked on network, I can see the mac computer, I can also see my username and folder, I click on it, I then see the drop box but when I click on it I get a network error message that says "Windows cannot access Users public folder drop box".
I don't know what setting I need to enable since I'm very new to this. I can access the files that are on my PC from my Mac just fine. but I can't access the files that are on my Mac from my PC. Do I need to create a new mac account?
I also noticed that when I click on the mac computer from my PC in Network, it doesn't ask me to enter a username and password, could that be the reason I can't connect? Please help.
Message was edited by: Stuart Lawrence

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

Windows Vista Machine Can No Longer Connect to Mac Following Upgrade

Before: Windows Vista machine with 6 drive letters mapped to the 6 hard drives in my Mac Pro running 10.5.8.
After: Mac Pro upgraded to 10.6. Now the Vista machine cannot connect to any of the drive letters, nor can it open the Mac Pro by browsing -- the Mac Pro shows up, but cannot be opened. A second Windows machine also cannot open any shares on the Mac Pro.
I have checked all of the settings in Network on the Mac Pro and they look fine. Does anyone have any ideas for things to check?

I was able to see the other Windows XP computer and begin to connect. I was then presented with a login screen. I tried using the usual user name and password - no luck. I then formatted the user name as as follows:
user name: computer name\user name
password: as normal
And it worked. Specifically in my case:
user: cwy-pln2152\administrator
password: planning
This is what worked for me your mileage may vary.

ITouch Firmware Upgrade - Can no longer connect to car audio system

I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

Can no longer connect to Mac index via FTP

The other computer on my LAN is running Ubuntu Karmic and I can FTP to it no problem. Used to be able to FTP to my Mac no problem until I tried this free firewall software which claimed to have a decent GUI. I made sure to remove the software completely using the TrashMe app when I decided it was useless, but have not been able to reconnect from my Linux machine to Mac via FTP. I can ping the Mac no problem and have also gone through all the basic troubleshooting steps: turned off the firewall and tried - nothing, turned the firewall back on - some story, restart, rebooted router, release/renew IP (not that that would help but what the hey).
Anyone else experienced similar issues? Any suggestions as to next steps?

Hi. Try this:
- Open System Preferences
- Open Sharing (not sure if is this name)
- Activate Share Files (or file sharing...)
- In Options button, you got to check FTP and the users (below) that will be able to access
Voilá... hope this works for you!

Excel Connection Manager suddenly can no longer connect to Excel from SSIS package

During the last 3 months, I used 32 bit SSIS 2008 (v 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results (reports) to an excel spreadsheet. Each report is written to a different
tabbed sheet in the same spreadsheet. The package was working just fine until May 9 2013, when suddenly every single Data Flow task with an Excel Destination displayed error icons and raised the following
error message when opening the Advanced Editor:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at <DataFlow task name>: SSIS
error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager <Excel connection Manager> failed with error code 0xC0202009. There may be error messages posted before this with more
information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)Originally the error message reported that the Error Code was "0x8000FFFF", but I can't seem
to reproduce that error code since. Now I am only getting the above error message.From the time I created the original package (when it worked fine) until now, I have been using the same computer, writing to a (32 bit) 2010 Excel file in
a local folder. The filename and location have not changed. The ConnectionString has not changed. The Connnection String I am using is Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion Results_dt01.xlsx;Extended Properties="EXCEL
12.0 XML;HDR=YES;". Now an attempt to create and test a NEW Connection Manager yields me this error. "Test connection failed because of an error in initializing provider. Unspecified error.",  whereas before I had
no problems creating a new connection manager.I checked a second SSIS package, which I also built during the past 3 months, which loads multiple sheets from multiple Excel files to a SQL Server 2008 database holding table. It uses the same
ACE OLE DB 12.0 connection to load the Excel speadsheets and this package continues to work fine on the same workstation.In desparation, wondering if the Microsoft ACE OLE DB 12.0 driver had become corrupt (even though the second package
was raising no errors), I did download and install the Microsoft ACE OLE DB 12.0 driver.  That did not solve my problems with the first package.I need to get this package running again ASAP as it is targeted for UAT testing in a
matter of days. Any help with this issue would be greatly appreciated!

I submitted this issue above and now I am having the same problem again. I am using the same local computer, the same operating system (WinXp v 5.1.2600 SP3 Build 2600) as originally described. I am working with the same SSIS package that
writes multiple query results (reports) to an excel spreadsheet. This package has been successfully executed multiple times, but now I am suddenly getting the same error as follows:
Error at 1ConversionContacts [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
Error at DFlow Write soft deleted duplicate claims to Excel sheet [Excel Destination - write duplicate claim nbrs that have been removed to Excel [61]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
The package will not run because of these multiple errors (multiple because it occurs on every single excel destination in the package).
I have Run64BitRuntime set to false on the project. I have triple checked that the excel file name (which I created and can access) exists with the correct name in the correct path, which is local on my machine. The file is the same file in the same
location as when the package worked. I am running the SSIS service under my own network login, as I was when the package worked. I have been consistently getting this same error whenever I change my network password without updating the password
in the SSIS service, but I have triple verified that the service is using my latest password. If I try to open and edit the Excel Destination in any DataFlow task I get the same error. I can successfully create a new Excel Connection Manager pointing
to the same excel file. However if I try to assign the newly created Excel Connection Manager in the data flow, I cannot activate the drop down to choose the Excel sheet without getting an 'Unspecified error' message. I then swapped out
the file with its template version, and ensured the name was updated as correct. I still get the same errors.
Oh, and the SSIS package is extracting data from a SQL Server 2008 database with an ADO.net Connection Manager using Windows authentication. I have no problems with the SQL Server connection, it has always worked and still does. It is only
the connection to excel output file which is locally stored on my machine.
Has anyone got any suggestions for me?

I can no longer connect to Store from iTunes

It used to work fine, but I now get the following error message when trying to connect to the Store from iTunes.
<<iTunes has stopped working - A problem caused the program to stock working correctly.Windows will close the program and notify you if a solution is available.>>
Does anyone have a solution?

Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

I have just updated to Firefox v 6.0.2 and can no-longer open web links from Windows Live Mail 2011 (Bld 15.4.3538).

Shutting down programmes and rebooting computer did not help. Launching web links from Live Mail has never been a problem before. Error message reads " There was a problem sending the command to the program"

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Apple TV can no longer connect to network after upgrade.

I had heard that lots of people were affected with this problem with the software upgrade before this one so I deliberately waiting until this one came out before taking a chance. I was wrong.
After updating to 4.4. (3140) I can no longer connect to my network. It says there was a problem and gave the error messaged number: (5) in brackets.
I've had nothing but problems with both Apple TV's that I have owned, version 1 and this new version 2. I've a good signal from my router and I've used three different ones over the time I've had the two apple tvs.
Anyone got any ideas.
I can't connect the apple tv directly because they are too far apart in the house. I can only connect by wifi.
There is nothing wrong with my wifi because I'm connected to it fine though my imac, iphone and ipad and laptop, (not all at the same time)

Ok, here's a solution, courtesy of our friends at AppleCare.
Unplug the router for 90 seconds.
I was running ATV2 with a Time Capsule. The TC thought the ATV was still connected using its former IP address so wouldn't let it reconnect with a new one.
Hope this works for anyone else with same problem.

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

After upgrade can no longer connect to Mac from Windows

Similar Messages

Maybe you are looking for