ITouch Firmware Upgrade - Can no longer connect to car audio system

I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

Similar Messages

  • After upgrade can no longer connect to Mac from Windows

    I have a wireless network (Linksys) with 2 iMacs, Ubuntu Linux and Windows XP workstations. I have file sharing between the Windows and Mac computers. After upgrading I can no longer see the shared folders on the upgraded iMac from the Windows box. I cannot even ping the iMac by node name, but I can ping it by IP address so it is recognizable on the network. I cannot connect by IP address, however.
    I have file and printer sharing enabled on the Leopard iMac. What can I do to restore the former connection?

    Thank you! That partially solved the problem. I can now see the Leopard Mac and can open my user folder on it. However, the subfolders give an error saying they are not accessible - permission denied. I have gone through the folders and set all of them to Shared, but this did not make them accessible.

  • Sky Router firmware upgraded - can no longer login with credentials

    I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

    After review the events of the morning.....
    I normally keep my routers in the basement where my eth jacks all hub.  High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor.  I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor.  So it was moved to the first floor, on a counter.  That morning the router started acting up a bit, not bringing an iphone online.  It was looked at - and a couple of post cards that had been placed on top, removed.  Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.  
    1.  There is no way to look at temperature - maybe the device doesn't even know its own temp.
    2.  There is no fan that I can discern.  Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow".   Temp controlled fans is simple, well proven tech.
    3.  This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
    Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
    me

  • Zens - connectivity with car audio systems

    Hi - got an odd, obscure question. I have an Audi fitted with the so-called 'Audi Music Interface'. As well as the ubiquitous Ipod connector, this one comes with a mini-USB port to which I have successfully connected a Zen X-fi 32GB and a 2GB Samsung YP-K3. However, when I try to connect my 4GB Zen V+ I get an 'unable to connect' message from the Audi.
    The music on all three is from the same source (same file formats etc) so what can be thedifference between the two Zens that prevents one of them from being recognised by the unit's I have usedWMP to transfer the music to all threeMP3 players.
    Another oddity - while I'm at it - is that the X-fi doesn't like being undocked from the car and will frequently lock up and require a reset. It will resume working without a problem if left connected iin place.
    Any ideas anyone
    Paul

    OneMoreOne wrote:
    Yeh - tried that. Trouble is, it doesn't last. I frequently have to reset the device and, every two or three days, it hangs so completely, I can only get it going again by going into Recovery mode and doing a 'clean up'. This works but not for long.
    I've also noticed that the Zen doesn't appear to charge while connected th the car system. The little green battery indicator suggests that it is charging but after 48 hours in the car, the Zen won't start and has to be recharged via my computer
    If that player is under warranty I would return it. If not use another method to connect to the car stereo. Unfortunately I don't know enough about the system you have to advise on that. As for the charging I have a USB port on mine & the same thing occurs as it appears to dock & charge except it does not. That I would say has to do with the player itself not that it is a defect of the player. For instance all wall chargers in particular the ones you can plug a usb cord into will not charge a Creative player. I know because I have tried with several different players I own. The fact your stereo is Ipod ready tells me that very well may be why it does not perform as you would expect since the 2 devices are very diiferent.Wish I could be of more help.

  • Realtek 8111D adapter can no longer connect at gigabit speed to WRT610N after firmware upgrade

    Ever since I flashed to the newest firmware,  the Realtek 8111D adapter on my Gigabyte X58 Motherboard can no longer connect at 1 gig to the router.   There is a connection detected in the OS but I wasn't able to get into the config at 192.168.1.1 or use the internet.  Finally, after two days of messing around, I got things to work again by limiting the network adapter to 100 MBPs.  Is this most likely a bug with the firmware or is it something else?  Is there any way to flash back to the original firmware? 

    Its not the problem with the Firmware. When you update the firmware on your router, you need to Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...After this try to see if your computer is working on 1gig speed.

  • After upgrade to 10.7.1 users can no longer connect to shares

    Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
    Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
    Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
    WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
    A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
    -- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
    Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
    I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
    ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

    I've only one hint to you, cause I've mot on Mac-Server.
    With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
    This had caused problems with some NAS systems too.
    Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
    Lupunus

  • Can no longer connect to certain shares after upgrading to 10.8.4

    After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
    When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
    I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
    Can anyone help?
    Thanks!
    Jon

    No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
    The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

  • Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

    following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

    Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

  • Apple TV can no longer connect to network after upgrade.

    I had heard that lots of people were affected with this problem with the software upgrade before this one so I deliberately waiting until this one came out before taking a chance. I was wrong.
    After updating to 4.4. (3140) I can no longer connect to my network. It says there was a problem and gave the error messaged number: (5) in brackets.
    I've had nothing but problems with both Apple TV's that I have owned, version 1 and this new version 2. I've a good signal from my router and I've used three different ones over the time I've had the two apple tvs.
    Anyone got any ideas.
    I can't connect the apple tv directly because they are too far apart in the house. I can only connect by wifi.
    There is nothing wrong with my wifi because I'm connected to it fine though my imac, iphone and ipad and laptop, (not all at the same time)

    Ok, here's a solution, courtesy of our friends at AppleCare.  
    Unplug the router for 90 seconds.
    I was running ATV2 with a Time Capsule.   The TC thought the ATV was still connected using its former IP address so wouldn't let it reconnect with a new one.
    Hope this works for anyone else with same problem.

  • HT5569 Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

    Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

    No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.

  • Can no longer connect to wireless router after upgrading to iTunes 9.2

    My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

    Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
    Thanks for your help.
    D

  • Can no longer connect to Airport Express with upgrade to iTunes 10.1

    Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
    Any ideas? I have tried to uninstall and reinstall airport express with no success.

    Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
    [iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

  • After i upgrade my ASA 5505 from 8.2 to 8.4 i can no longer connect to ASDM. showing connecting ..... please wait for hours now

    after i upgrade my ASA 5505 from 8.2 to 8.4 i can no longer connect to ASDM. showing connecting ..... please wait for hours now

    Ron
    I recently looked at this question with a customer who has been running 8.2 and needs to get some features in newer code. We decided that it made more sense to go to 8.4 than to 8.3.
    HTH
    Rick

  • Webex can no longer connect to meetings after upgrading to Yosemite.

    I recently upgraded to Yosemite 10.10.1 and found thereafter that Webex, which is a screen share application used for online meetings, can no longer connect to Webex services using the most current versions of Safari, FireFox and Chrome. Java scripts are enabled, pop ups allowed on all browser and yet the problem persists. Any thoughts on how to resolve this?

    There was nothing that I did to make it work--it just started working again in Safari. However, it takes a few minutes after I click on Login and then the meeting comes up in another window behind the one I logged in on. I just tried it in Firefox and it now works there; still does not work in Chrome. All three browsers still have the following message in a black banner at the top: "Your browser version is not supported for use with WebEx and may not provide an optimal experience.To view browsers that support the best WebEx experience, go here." One thing I did do that may have enabled it to work in Firefox was to remove Silverlight, which is a Windows app and I'm not even sure how it got on my computer. I was told that it has a similar plug-in as the WebEx plug-in. I'm still searching for answers.
    Robin

  • Can no longer connect to SMB server after upgrading to Lion

    We have a MacBook Pro that was running 10.6.8. The user upgraded to Lion, and can no longer connect to a Windows 2008 file server. (We have two offices connected through a hardware tunnel, but i do not think this is the issue.)
    We have tried to connect in the Finder (smb://[email protected]/). It asks for usr / pass, and then just hangs on "Connecting to server"
    We can ping, have tested these credentials on other computers, and tried other credentials on this computer, to no avail. Furthermore, we installed a fresh copy of Lion on another computer, and successfully connected, so I don't think the issue is with Lion itself.
    There must be something from the previous install that did not "upgrade" properly, but I don't know which file / setting it could be. It is system-wide setting, as we have also tried another user account on this same Mac.
    We've also run Onyx to fix permissions, clean out all caches, etc.
    Any idea what file i can change, modify, or delete?
    Your thoughts would be much appreciated.
    Thanks.

    Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
    Thanks for your help.
    D

Maybe you are looking for