After upgrade to os 4 some apps don't work including Apple Store

Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.

I had same problems.
I decided to "downgrade" back to OS3. You can too!
Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0

Similar Messages

After software update (Sept. '09) apps don't work and some missing

Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!

expresso3 wrote:
yes i am fully aware of that!!!
This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
the post says "after software update (sept. '09) apps don't work and some missing"
there has been no update in sept 09!!!!
Perhaps the OP doesn't connect the iPhone to the computer very often.
Phil

After upgrading to Yosemite, my external speakers don't work. Any clue what to do?

After upgrading to Yosemite, my external speakers don't work. Any clue what to do?

System Preferences
Sound (Make sure you have your external speaker cable or external headphones plugged in)
Mute is selected (Uncheck Mute)

HT4759 How do I upgrade my iOS I use an iPad one and some apps don't work for the iOS I'm running , help,

Help , I don't know how to update my iOS on the iPad one some apps won't work with the one I have and are suggesting that I update . Can someone help me figure this out.

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.0.x
iPhone 4S                                    iOS 7.0.x
iPhone 5                                      iOS 7.0.x
iPhone 5c                                     iOS 7.0.x
iPhone 5s                                     iOS 7.0.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.0.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.0.x
iPad 3                                          iOS 7.0.x
iPad 4                                          iOS 7.0.x
iPad Mini                                      iOS 7.0.x
iPad Air                                        iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Some Apps don't work after an upgrade IOS to 6.1.1

Description of the problem with my iPhone 4 after an upgrade from iOS 5.1 to 6.1.1:
Some Apps try to start but stopped immidiatly.
The issue for my case:
Try to find your App trough the App Store on your iPhone.
The status of this App should be open. (but when you try to open it, it won't !!!)
Use the main button to go back to your App and delete it.
Go back to Apps Store and reinstall your App.
Check the progress of the installation.
When the install is done open your App again and it should be working again.
Best regards,
Schotel

Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

After Upgrading to 10.9.4, Apps Don't Quit, Won't Restart. Now What?

I have a mid-2011 Mac Mini. It was a joy to use until OS X Mavericks came along.
I'm on the road a lot, and remote into my Mac on a daily basis, whether it be from my iPad or laptop.
Since upgrading to Mavericks, I've had to reboot the Mac about once a month. Since 10.9.4, it is about once a week.
Last night, I closed Mail and Chrome, but they would not exit. I had to use "Force Quit".
Today, neither will open. after fiddling with PS AX from the command line and trying to kill the tasks, it seems that "Force Quit" didn't finish the job. The task status now appears as "?E" or "?Es" when using PS AX, and the KILL command doesn't do anything. The process names are now in parenthesis.
I tried "KILLALL Finder" to see if flushing-out the cache would help. Now, Finder won't start.
Before this started, I took a peek at the Preferences for GoToMyPC. Now, System Preferences won't start.
Most notable is that the Speech Recognition Server crashes a couple of times a minute. Since updating to 10.9.4, the round speech control no longer appears on the desktop. I didn't notice it at first, because when I'm away, I can't hear my Mac talk to me, anyway.
So, tomorrow, I've got to make a six-hour road trip to boot my now buggy Mac.
<Edited by Host>

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

After upgrade to Yosemity my FCPX app will not work. Cant figure out how to upgrade it for Yosemity.

After upgrading my Mac Pro laptop to Yosemity I cannot open FCPX. Messages says upgrade under Apple software upgrades but computer says no upgrades are avaiable.

There is no "Software Update" option with OS X Yosemite. It has been changed to "App Store," and updates are in the App Store.
It sounds like there's something odd with your install of FCP X. You can always remove it and reinstall it; you shouldn't lose any of your projects or media (though I'd recommend you have a backup). The easiest way to remove it is to activate LaunchPad and then find FCP X and click and hold on the icon. Once it starts to jiggle, just click the "X" in the upper left corner to remove it, like you would on iOS. Once it's uninstalled, try installing again from the App Store.

IPad 3 iOS 8.0.2 some apps don't work, everything slow

IiPad touch updated to iOS 8.0.2. worse than any of the ios 7 updates. It seems that lately ever update makes things worse. My pad has never been so slow. I now have some apps that don't work as they should. iPad and AT&T have never been happy with each other but now freezes and just taking so long to access some websites and why go from one move to two to close a website. Makes no sense to me. Maybe I am just not used to it yet, but it takes about twice as long to close a web page. My pad is 32 gig and I have 14.9 free. As far as a fix, I am about ready to throw this pad in the lake and go back to Microsof, something I never thought I would say. I have an iMac and just retired my notebook. I am trying a dell with windows 8 As a replacemen. School is still out on that platform but it is better than this ipad. IF some one has similar problems and fixed, please let me know.

Since the vast majority of iPad mini users are not having WiFi problems then, if you are having consistent WiFi problems on all networks, you very likely have a hardware problem with your iPad mini. This probably cannot be fixed by any iOS software update. The iOS 6.0.2 software fix likely was for a bug that only showed up with certain access points or network configurations. The only way to get your problem fixed is to get your iPad mini replaced by Apple. The fastest way to do this is via the Apple store but you can also arrange for replacement if you contact Apple support.

Some apps don't work.

Some apps when I open them, the start up and then 5 seconds later, it goes back to the app screen. Please help!

Basics from the manual are restart, reset, restore.
Have you tried all three of these?
http://support.apple.com/manuals/

After adding 2nd WiSM and failing over AP's some apps don't work

We have a dual core made up of 2 6513's. In 6513#1 we have WiSM#1 which we have had for sometime now. We have added a 2nd WiSM in 6513#2 for redundancy purposes also we are going to be re-configuring the WiSM in 6513#1 to more match that of the new WiSM in 6513#2. We have installed the new WiSM and failed over the AP's from 6513#1 so we can re-configure it's WiSM. The failover went great and no issues, with the exception that a web application or two didn't function from wireless clients and users were having issues getting to some mapped drives. The only difference from the new WiSM config vs the old WiSM is that on the old WiSM the AP's were in the same VLAN as the controller management interfaces. Now with the new WiSM it's configuration has the controllers AP mgt interfaces ip addresses in a different VLAN from the AP's, we are doing this based on Cisco best practices. If we revert the AP's back to the original WiSM/controllers the PC's where they are on the same vlan/subnet the applications and shares that were having issues the other way work. We have placed a call with Cisco TAC and they say our configs look good and we even sent them some packet captures and they said everything looks normal. The wireless clients can ping and resolve the server hosting the application database just fine.
Thanks

We did create the mobility groups, and we are using DHCP opt 43. The AP's find the 2nd WiSM#2 just fine and associate to the controllers and all the WLAN's work just fine. The only issue is that after the AP's are on the new WiSM and controllers there is an application or 2 that is having trouble locating it's database server and that some share's are not working. Again the only difference in this new setup in that now the AP's are on a different subnet/vlan from the controller mgt addresses where as before they were in the same subnet/vlan and the application and shares worked fine. It's almost like it is a bit of a routing issue?
Thanks

Library not found after upgrading to iTunes 7, old libraries don't work

For the second time since iTunes 7 was released, I've been asked to upgrade and did so without issue on the first day of upgrading. When I shut my computer down and came back the next day, however, the library is not found when I attempt to launch iTunes. Before, I simply reverted to iTunes 6 and copy/pasted a "previous library" as the current library. Now, though, I have a new iPod and it needs iTunes 7 to run. I've tried copy/pasting a previous library to the iTunes Library folder with no luck.
90% of my music is in the .m4a format so I need iTunes to listen! Not to mention, I need it to update my brand new iPod. I really need help on this, can someone give any advice? Thanks in advance.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

After update iOS 8 some of the apps don't work please help me

After update iOS 8 some of the apps don't work please help me As fast as you can

There can be some of that. Unfortunately, it's up to the app developers to make their app work with the iOS.
So checking for updates can help. You can also look at the reviews for the app, see if others have the same issue. If 8 has broken the app, all you can do is wait.
In some cases, a reset can help. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again. (this can work if the app is fine with iOS8 but is just glitching...it's a harmless reboot of the system)
Another thing to try is to force quit the app(s) and force them to reboot. Double tap the home button. Flick the preview for the app up and off the screen to close it. Then single tap the home button to exit the mode. Try your app again. If it's just a glitch then this sometimes clears it up.
I know once I updated my devices I then had several updates pushed out - updates that required iOS8 so weren't available before the update.

Some mailboxes don't work after upgrade to IOS7

I have 3 gmail mailboxes on my ipad. Two of them are corporate (google apps) and one is ordinary gmail. After upgrading to ios7 only one of them is working (one of the corporates). Other two look like inactive in the panel on the left (grey color). I can't open them. But I can see new messages for these boxes in notification center and it's possible to open and read them. But, i can't do anything with them, for example, move to specific folder.
I tried to restart device and tried to reconfigure them. It didn't help.

I've had the same problem in the past. Pulled my hair out trying to trouble shoot it. I just had the same things, and came on here to see if anyone had figured it out.
I was able to fix it the last time. It seemed as though the page had become corrupted somehow. I started fresh and rebuilt the same page, then deleted the original page. The links eventually worked.
It'd be more simple if Apple could just prevent iWeb from arbitrarily changing text color.

All Mac apps don't work after cloning on new hd.

All Mac apps don't work after cloning on new hd.
I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
Thanks for your help.

All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

My apps don't work after synching music files from my PC

My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
Please Help.....

What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

After upgrade to os 4 some apps don't work including Apple Store

Similar Messages

Maybe you are looking for