After VO substitution, the "Imported document" doesn't start with "/oracle"

Hello Everyone,
I recently tried a VO substitution and while performing the import command in command prompt, the see the following:
C:\>C:\p9879989_R12_GENERIC\jdevbin\oaext\bin\JPXIMPORT C:\p9879989_R12_GENERIC\jdevhome\jdev\myclasses\psu.jpx -username apps -password appsdev2 -dbconnection "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oradbdevsna01f.mascorp.com)(PORT=1521))(CONNECT_DATA=(SID=DEV2)))"
Imported document : /icx/por/wf/server/customizations/site/0/ReqLinesNotificationsVO
Import completed successfully
In the Jdeveloper, I made sure that the substitution that I'm making is oracle/apps/icx/por/wf/server/ReqLinesNotificationsVO with the new extended VO: xxmas/oracle/apps/icx/por/wf/server/XXMASReqLinesNotificationsVO
If correct the Imported Document as mentioned above, it should always start with "/oracle/apps/icx/por/wf/server/customizations/site/0/ReqLinesNotificationsVO". Can anybody please explain my why it is happening? Your response is greatly appreciated
Thanks,
Anand

Some general troubleshooting tips:
1. Open the jpx file under myprojects with notepad and check if the paths are generated properly.
2. Check your project settings and substituions once again.
3. Restart the jdeveloper and then recheck the substitutions.
4. Make sure to save all files after you create substituions and before you import.
Thanks
Srini

Similar Messages

  • Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

    facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

    Apple has released a document which is reported to address the recent FaceTime issue.
    http://support.apple.com/kb/TS5419

  • Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

    Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
    Thank you.
    Best Regards,
    Gerald

    Hi Gerald
    This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
    P.S Please do not post your e-mail address here.
    Taylor

  • The DB tools doesn't work with Microsoft SQL

    I am tring to write series of waveforms to a database. The DB tools doesn't work with Microsoft SQL, but when i replace the SQL with Access, it works fine. I have to use SQL in the application.
    Any advice pls?
    longing for your reply.
    Attachments:
    test.vi ‏47 KB

    Right off hand I would say the problem is that you are connecting through ODBC. Try the native SQL Server driver, your connect string should define the provider as "SQLOLEDB.1".
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?

    When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?
    I need to be able to send it to a PC in order to print it.

    Hard to say what is happening without examining the file.
    If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
    Peter
    ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

  • The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    You don't swipe but actually press, hold and push up.

  • SRT Framework exception: The WSDL document is not compatible with proxy

    hello,
    I'd like to create a logical port to my web service but when I create this type of error:
    SRT Framework exception: The WSDL document is not compatible with proxy class "YAIRPORT_CO_AIRPORT_SOAP": "Unsupported Operation (s): getAirportInformationByISOCountryCode, getAirportInformationByAirportCode, getAirportInforma
    someone has an idea?
    thank you

    Hi,
    Most probably your class YAIRPORT_CO_AIRPORT_SOAP was't automatically generated by SAP from the .wsdl file. If so, then you have to generate it from this file and then create the logical port. For this purpose, go to se80, display the function group there you want to add the class, right-click it and choose Create -> Web Service. Then on the following screens choose Service Consumer, Local File and specify the .wsdl file for the web service you want to use. Finally specify a Package, Prefix and Transport Request, activate the changes and you're done. Now you can create the Logical Port.
    Hope this helps,
    Greg

  • I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    Mike wrote:
    > Could someone tell me why this prototype-based lightbox
    seems to work on one
    > of my sites but not on the other?
    >
    > I literally took the exact same .js & css files,
    copied them over from one
    > site to the other, but it's only partially working on
    the new site.
    >
    > Works :
    >
    http://www.roxanacampagiorni.com/
    >
    > Doesn't work :
    >
    http://www.vilverset.com/sample.html
    >
    > Been troubleshooting this one for days, and I'm stumped.
    Script wants
    > nothing to do with lightboxing HTML files on the new
    site. Only straight
    > JPGs. But it was written to work with them, and it
    *does* work with them
    > just fine on the *other* site.
    >
    > Where is the anomaly between the two sites that's
    causing it to break in
    > sample.html?
    >
    >
    Not sure if this is relevant but on the page that works you
    have these
    js files linked - 4.....
    <script type="text/javascript"
    src="/scripts/jscripts.js"></script>
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    and on the page that doesn't - 3......
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    HTT
    chin chin
    Sinclair

  • Beats audio doesn't start with windows

    Hi,
        beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
    it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

    Hi @MadGrin 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    When I checked the driver page for DV5000  I noticed it came with either XP or Vista.
    Have you checked for any HP  bios updates for your notebook?   If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
    Updating the BIOS
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Have you checked compatability for Windows 8.1.  Windows compatibility Center
    There is a option to scan your computer to check if your apps and device work.
    Have you done all the updates for Windows 8.1?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this c

    Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this code and it is a Christmas gift to my wife. HELP!

    I had this problem. There are actually two boxes. The outside one with the photos and stuff and glued into it is another box containing the disks. That box has the serial number. Adobe was NO help with this as if no one else ever could not find it. I had to rip open the outer box.

  • Where is the forum for Fusion Report Service with Oracle Reports?

    Where is the forum for Fusion Report Service with Oracle Reports?

    You could try this one, maybe post your question.

  • HT1386 why the sync session failed to start with my iphone

    Why the sync session failed to start with my iphone

    i did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!

  • Local OC4J instance doesn't start  from oracle developer suite 10gR2

    Local OC4J instance doesn't start from oracle developer suite 10gR2

    You might also wish to consider posting your question here:
    <br>
    Forms
    <br>
    OC4J (maybe)

  • Do you think the intel based macs will start with the iMac?

    do you think the intel based macs will start with the iMac? or the mini? or a tower?
    when are they suppoed to be ready theoretically anyways?
    just curious...
    chaz

    Hi iSMH;
    According to what Steve said in his keynote address on the Migration to Intel, so I think this is not speculation, they will start with the Mac Mini and iBook with the release being sometime during the summer of 2006. The rest of the line will foloow later with the Powermac being released sometime during the second half of 2007
    Allan

  • I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

Maybe you are looking for