After XP SP2 upgrade connot save settings

Have setup many wireless routers (WRT546 style) without any Save Settings issues but 2 weeks back upgraded XP-Pro with Service Pack 2 and have not
been able to setup anything since! Have disabled Virus Software (Norton Corporate Vaerion) and Firewall is not running. Transferred router to another XP computer and
saves everytime... Any thoughts or direction?

a very weird issue, ha ?? try a different browser on that computer...now, as the set up page can be accessed properly from other computer..doesn't seem to be router issue as well....try turning off the windows firewall...

Similar Messages

After iOS 8 Upgrade Icon on Settings still there...

after the iOS update 8 on my iPad Air, an indicator icon is on the settings. Even a configuration as a new iPad and restoring from the backup has not helped

That happened to me. I rebooted and now my docs are back again.

Can't connect to iTunes Store after Vista SP2 upgrade

Network connection OK & functioning. All other apps can connect to the internet. windows firewall has itunes and bonjour enabled. Flushed DNS. Upgraded to iTunes 8.2 and was able to connect to itune stores. Upgraded to Vista SP2 today and cannot connect to itunes store. Any ideas??
Itune Diag Summary:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
TOSHIBA Satellite P205
iTunes 8.2.0.23
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.1.3
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 2AA898C8821C918D
Current user is not an administrator.
The current local date and time is 2009-06-09 19:11:20.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {173069C1-D899-4D3E-88E1-DC7BE3560769}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Tue Jun 09 18:45:04 2009
Lease Expires: Tue Jun 16 18:45:04 2009
DNS Servers: 192.168.0.1
192.168.0.1
Adapter Name: {31DACFDD-8FC3-4A3D-BBCB-319A60DA357C}
Description: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection could not be made.
Connection attempt to iTunes Store was unsuccessful.
The network connection could not be made.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection could not be made.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection could not be made.
Last successful store access was 2009-06-09 14:34:29.

Fixed it. I had both windows firewall and Kaspersky firewall tuned off. Turned Kaspersky ON and confirm iTunes was allowed. Can now connect to itunes Store!! STRANGE. It won't connect with all firewalls turned OFF???

After completing my upgrade to Adobe Reader 11.0.10 When I attpemt to use "Tools/File/File Save As" from IE 11 I get a "Adobe Reader is not Responding" and my browser is locked up.

After completing my upgrade to Adobe Reader 11.0.10. when I attempt to save an online PDF to my local drive I receive a blank window where I would expect to see file directory structure to save to.
No local directories are displayed for "Saving To", it is all blank. When I try to Close (by clicking X) the "File Save As" box a message pops up on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I then need to go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.
This was not happening in previous versions of Reader.
Tolls/File/File Save As always worked properly.
I have installed IE 11 (11.0.9600.17690)

Please don't post the same question multiple times!

IPad - after software upgrade the APN settings keep resetting by themselves. There are multilple accounts of this happening. Please help.

Hello,
I have a problem with an iPad 2. After the software upgrade to iOS 5 the APN settings keep resetting all by themselves (I set the APN, I get out of the setting by pressing the back arrow on the top left of the screen, I get back in there and the APN setting is gone). Of course, the internet connection si not working. I've seen other people having the same problem on their iPads after the upgrade.
Does anyone have any idea what the problem could be?

I too am experiencing this issue - on an iPad 2 using a UK BT DATA plan SIM. This is not an issue with the SIM, as I have tried it in a different iPad and it works without any problems.
I have also tried all recent iOS updates, hoping it would overcome the issue - but no joy.
Can we have some assistance from the fine people at Apple please???
It is getting rather infuriating

PWA issues after Office 2010 SP2 upgrade

We recently upgraded some client machines that have Project 2010 Professional installed to Project SP2. Several of these users also use PWA.
After the upgrade, I heard from a few of these users that in PWA, the Workflow Approval buttons were unavailable, and that they were unable to export to Excel. I checked with another user who uses the same Project Server and did
not receive the update, and he had the same issue.
I did find kb2817580 that describes these exact issues, but the timing is suspicious with the client SP2 upgrade. Is there something in the Project 2010 SP2 update that would cause this problem on Project Server, or does Server need to be upgraded
concurrently with the client update? I was not under the impression that the local Project update would affect Project Server. Is that incorrect?

Cwoodin, in my experience, the client doesn't make any modifications at the server.
About the updates, i would recommend you to apply SP2 at the server as well. Besides that, take a look at the ULS logs to see if it spits any errors.
Regards

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver.

What settings see Audigy again after XP SP2 install rollbac

Help please, Win XP SP PC, Audigy just fine, then install SP2, access denied 50% of the way through, install does a rollback, warning that some things may not work so well, and its lost me my sound :angry:Tried registry fixes progs, Creative diagnostics say hardware not found, but PC is dual boot and under Win2K audigy works fine. No doubt some tick box or entry somewhere corrupted. I have tried reloading the software from the CD back on, tried also uninstalling from CD then reinstalling, tried uninstall from add/rem progs then new install. Have not removed card as working in win2K so not card seating problem.Ghost copied back on the copy I made of my boot dri've prior to messing about with fixes, then tried for a repair from CD. Went into diagnostics and still fail declared, then whilst thats on screen, I was in word and heard paperclip go tink tink, wow...sound back, ran diagnostics and still fail, so its working, and well, and still diagnostics fail. Who cares if its working Do a restore point sensibly.Few hrs later after need for reboot, no sound, so did restore to that restorepoint, but still no sound...oh sod ! Now thats frustrating !?Please help, spent two whole days non stop fixing or trying to.Bloody SP2 :angry: its screwed up a few other things that I have now managed to recover. DBenz

Hi John-CL,PC tailor made to my own specs, March 2004, Win XP home SP is PC, this was around then and I wanted everything ok for such. The Motherboard is an MSI 875P neo (lovely board great reviews) having come out circa that time, all latest for XP.Audigy 2 ZSDevice Manager also blank after that SP2 install failed, unable to fix that despite many forum postings by others with same problems usually resolved with permissions in registry.A lot of the XP issues seem to end up in there, permissions, admin etc.Don't suppose video card details matter here. HDs are Seagate Barracudas. ATA onto Raid.Hope this hel
ps.
Also my Device manager is blank, tried all internet suggestions for others with such, permissions fix etc registry but to no avail.Also installed latest driver.Many thanks for assisting.Desperate here as video editing to do !DBenzMessage Edited by DBenz on 08-27-200703:24 AM
Message Edited by DBenz on 08-27-20070:0 AM

Save settings after unplugging

Hello people,
I have the small business pro srt546w ADSL2+ annex bwan router
and every time I disconnect it from power I loose the settings and I have to
reconfigure. Of course I press the button that "says" save settings.
Any ideas?
Thank you

redtwentythree, welcome to Apple Discussions & the Mac community.
Is the time also not being retained?
If the iMac has not been plugged into AC power for a while, it's quite likely that the internal memory (settings are stored in memory) battery is weak/dead & needs replacement. Check this site for battery part numbers and sources. Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
You can obtain some info on your iMac by selecting +About this Mac+ under the Apple (far left) menu. Tell us what it says in the window that opens. You can click on +More Info+ for additional detail info.
 Cheers, Tom

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

HP Pavilion DV6 Sleep Mode Issue After Windows 10 Upgrade (Goes To Sleep After 2 Min Of Inactivity)

I recently upgraded my laptop from Windows 7 to Windows 10. The upgrade went smooth and everything appears to be running fine except for one anoying glitch. After approx. 2 min of inactivity my laptop atuomatically goes into sleep mode and logs me out. I have checked all my power settings/sleep settings/screen saver settings...etc and I have completed all the windows updates. I don't see any timers anywhere that require adjustment. Any help would be appreciated. Note: The laptop wakes up fine with no issues.

Hello Konacha, Thanks for posting on the HP Forums!I have read your thread regarding the computer entering sleep mode, upon Administrative prompts or a restart. There isn't a lot that could be done, but by the end of it, the issue should be resolved Hopefully, the simple fix is creating a new power plan. Your current power plan may be incorrectly configured. This Microsoft website can help with all the details of this task: Change, create, or delete a power plan (scheme) If that doesn't help, then personally, I would reinstall the operating system. This will fix it, as it will address any software conflict or virus that could be causing this. First, you should backup your data. I will provide information on how to do that: Backing Up Your Files (Windows 7) Once this is done, it is safe to do the System Recovery. Here is some information on how to do this: Performing an HP System Recovery (Windows 7) Please let me know if you have any other questions. Thanks again for posting, and have a great day! Mario

Cannot send emails from Hotmail on my iPad appears only after iOS 7 upgrade.

Cannot send emails from Hotmail acc on my iPad, problem occurred after iOS 7 upgrade. Message appears that user name or password is incorrect in settings but they are correct when checked.

Try deleting and reinstalling your Hotmail email account.

IPAD2 very slow after IOS 8 upgrade

After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
Who can I solve this problem? Any workaround?
PD
Apple should better test the software before delivering.
Thanks.

Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
And that's just the annoying ones....

Text notification not working after recent software upgrade.

I also have the Galaxy s4 and have noticed issues after the recent upgrade. My device will only vibrate now when receiving text messages, the notification sound doesn't seem to work anymore. I've tried adjusting settings on both my messaging apps until I'm blue in the face and can't seem to make anything work. Other notifications still work ok for the most part. Any ideas??

Please, nobody waste any time replying to this issue as the problem appears to be fixed now. I rarely restart my laptop as I usually just put it to sleep, however, I restarted it and the problem looks to have gone away. I may have fixed it with some of the things I tried, but the laptop may just have needed restarting - I'm not sure.
But as long as the problem is resolved, I'm happy. :-)))
Thanks anyway!

Cd/dvd device not recognized after os lion upgrade

my cd/dvd drive no longer shows up on the device list in Finder. I think it disappeared after OS lion upgrade...I need help fixing this situation.

Check you settings in Finder > preferences > Sidebar tab > check "CD's DVDs, and iPods".
Also check the General tab to display on the desktop.
Captfred

After XP SP2 upgrade connot save settings

Similar Messages

Maybe you are looking for