Age Analysis for a GL account?
Hie All
Good day, I have a client who has a unique requirement. They have a general ledger account which shows all Downpayments made. The client requires this account to produce an age analysis for each line item. Is this possible if so how can I achieve that?
Thanks
Hi
Thanks for the response but I might need your assistance on how to write the query, as you said it doesn't sound simple.
Just as a background the account in question is a balance sheet account (asset) linked to business Partner records on the accounting tab Down payments clearing account. When a down payment invoice is raised a DR is created on the down payments clearing account. This is the amount they require to age.
Similar Messages
-
Due date analysis for G/L account
Hy!
I need to make a report that makes due date analysis for G/L accounts similar to S_ALR_87012078 Due date analysis for open items
for Account payable.
Has any one experience with that and can help me with that?
Regards,
MarinaHi Marina,
its a bit surprising why you require due date analysis for GL accounts as GL accounts are used for realtime posting and no credit involved. Only AR and AP accounts contain credit, so they may be even over due and thus we require ageing or due date analysis.
If transaction is on a cash basis should be posted to GL not to Subledger. Since there is no due date system for GL posting due date is not possible which makes sense too.
Hope this gets a better clarity for you.
Regards
Bharat -
Ageing analysis for the down payment made to vendors-reg
Dear Gurus,
Can anybdoy explains my how to do ageing analysis for the down payment made to various vendors.
Thanks
C.M.SATHISH KUMAR.
[email protected]OK
Config t code is OBDF
Select AP view and due date analysis.
You need to create a variant for the field BSIK-UMSKZ in program RFKRRE01 which is the program for Vendors for due data analysis.
In the config you need to make sure create evalution is ticked.
You then need to set up a variant in program RFKRRSEL, for Vendor analysis, it should be called SAP_VARI.
Once all of that has been set up, you need to schedule a job to run for RFKRRSEL daily.
In terms of accessing the programs you need yo use t code SE38.
and to schedule a job use t code SM36.
Hope this helps.
Please award points. -
Ageing Analysis for ARE Documents - Clarification
HI,
1.What is the Purpose if ageing analysis for ARE ? and when it will be helpful ?
2. When i click on the Document system is showing is ARE Status numbers, each one have its own purpose can any one guide me
3. how it is helful to the Enduser ?
because i am new to CIN so please guide me
Reagrds,
AnuYou can use Tcode J_1I_ARE1_AGEING_ANALYSIS for SAP Report on Excise Bonding's Ageing analysis related to ARE1 document.
Excise Bond is a document that effectively licenses a manufacturing plant to remove goods from its premises without paying basic excise duty, on condition that the goods are then exported. These bond covers a fixed amount of excise duty. The excise duty of the goods exported under bond cannot exceed the bond value.
In the system, the term "excise bond" also covers letters of undertaking, and all of the excise bond functions apply equally to letters of undertaking, unless stated otherwise.
When you obtain a bond from the excise department, enter it in the system. The system numbers each bond automatically.
When you assign an ARE-1 to a bond, the system automatically warns you of any reservations that have already been made against the bond.
The system keeps track of the bond balance for you. When you post an ARE-1, the bond balance decreases automatically. In the case of running bonds, the balance increases again when you close the ARE-1.
Once an excise bond is no longer of any use to you, for example, if it expires or if you have exhausted a fixed bond, you can close it. This prevents any users from using it afterwards.
So, these kind of report will assist a user in day-to day ARE1 related activities.
Further, in Statement Regarding Export of Excisable Goods will show selection screen. Where you specify which parts of the statement you want to prepare as follows:
I
All stock removals without payment of duty
II
All removals from previous quarters for which you have not yet received a confirmation of receipt from the customs office
III
All stock removals that will exceed the export period by the end of the month
IV
All removals that you have reversed
V
A list of your bonds with their balances
Hope this assist you in understanding.
Thanks & Regards
JP -
Age analysis for stock materials
I needs to have a z report on age analysis of all the stock materials, the hitch being they do not have batch mgmt active.
Age analysis is needed from a period to a period, e.g. - current quarter.Hi, I think it's difficult to get stock age without batch managment.You need consider many factors,such as FIFO,movement with 'consume indicator' to write your report.
There are some standard transactions as below to evaluate movement documents:
MC50 for dead stock
MC46 for slow movement
MC44 for stock turnover
MC42/43 for range coverage
Try them.
Also reference to [http://help.sap.com/saphelp_46c/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm]
section: document evaluations
Lykin Kan
Edited by: Lykin on Aug 26, 2010 10:23 AM
Edited by: Lykin on Aug 26, 2010 10:25 AM -
Age analysis for customers and vendors
Hi All,
i needs to create an age analysis report on customers and vendors (0FIAR_C03), analysis could be done on <30 days, >30 days,>60,>90,>120 days , i needs to calculate these based between netdue date for payments and system date. any one can give idea how to do this
thanks in advance.
regards
rajaHi Raja
http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/frameset.htm
Try checking the above link. You can use RKF .... Use offsets --- for example <30 offset is -30 in varibles.....
Standard reports should give some idea
Regards
Naga -
Ageing analysis for advances received from customer
Hello All,
Please can anyone provide inputs on whether there are any standard reports in SAP that can provide ageing analysis of advances received from customer (posted using special GL indicators).
Thnx in advance.
Regards,
SudeepHi,
In Report S_ALR_87012168 you get which are due and which are not due (you can see per Special GL Indicator wise also)
If you think this will not suffice your requirement (like you would like to see 1-30 days, 31-60 days and so on)
I would suggest
You create a form in FDI4 - refer FDI5 and FDI6 for standard forms (you can even write own formulas)
Assign the form to report in FDI1 - refer FDI2 and FDI3 for standard reports.
Hope this will help you.
Regards,
Ravi -
Ageing analysis for vendor downpayment in gl account-reg
want whether we can do ageing for the Special GL Down payment account straightaway,rather than doing the ageing via vendor account.
Thanks and Regards,
c.m.sathish kumar
[email protected]Dear Mr. Murali,
The main aim is to calculate the outstanding amount lying in the account and for how long.
Thanks and Regards,
c.m.sathish kumar -
Functional Spec for VENDOR AGE ANALYSIS report
Hi experts
I need to develope a VENDOR AGE ANALYSIS REPORT. But due to some reason i cant be able to get the Functional Specification for that object. So could you please help me by sending the above mention functional Specification.
thanks and regadrs
Pratikgot the following from sdn thread:
This is the sample report for vendor aging:
Std reports Tcodes are:
customer : s_alr_87012178
vendor : s_alr_87012084
Custom designed:
REPORT zfi_customer_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: kna1, " Customer Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Customer Open Items Data
DATA: BEGIN OF int_bsid OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
belnr LIKE bsid-belnr, " Document Number
xblnr LIKE bsid-xblnr, " Ref Doc No
blart LIKE bsid-blart, " Document Type
zfbdt LIKE bsid-zfbdt, " Base Line Date
zbd1t LIKE bsid-zbd1t, " Due date1
zbd2t LIKE bsid-zbd2t, " Due Date2
zbd3t LIKE bsid-zbd3t, " Due Date3
waers LIKE bsid-waers, " Currency
dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_bsid.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
total1 LIKE bsid-dmbtr, " Amount in Local Curr
total2 LIKE bsid-dmbtr, " Amount in Local Curr
total3 LIKE bsid-dmbtr, " Amount in Local Curr
total4 LIKE bsid-dmbtr, " Amount in Local Curr
total5 LIKE bsid-dmbtr, " Amount in Local Curr
total6 LIKE bsid-dmbtr, " Amount in Local Curr
total LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
v_gtotal LIKE bsid-dmbtr, " Amount Totals
v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
v_subtotal LIKE bsid-dmbtr, " Amount Totals
v_date LIKE bsid-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
r_date2 FOR bsid-zfbdt, " Date Range 2
r_date3 FOR bsid-zfbdt, " Date Range 3
r_date4 FOR bsid-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Customer Code
CLEAR kna1-kunnr.
SELECT kunnr UP TO 1 ROWS
INTO kna1-kunnr
FROM kna1
WHERE kunnr IN s_kunnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e000 WITH 'Invalid Customer Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Customer Open Items data from bsid
SELECT l~kunnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsid
FROM knb1 AS l INNER JOIN kna1 AS l1
ON lkunnr = l1kunnr
INNER JOIN bsid AS b
ON lkunnr = bkunnr AND
lbukrs = bbukrs
WHERE l~kunnr IN s_kunnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsid WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsid BY kunnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsid.
CLEAR v_date.
IF int_bsid-zbd3t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsid-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsid-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsid-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsid-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsid-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsid-dmbtr.
ENDIF.
AT END OF kunnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-kunnr = int_bsid-kunnr.
int_final-name1 = int_bsid-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-kunnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsid BY belnr zfbdt.
LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsid-zbd3t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsid-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsid-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsid-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsid-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsid-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsid-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsid-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Customer Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
M O D I F I C A T I O N L O G
Date | Change Number | Initials | Description
30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
The below link will give Tables & Relations.
http://www.erpgenie.com/abap/tables.htm
http://goldenink.com/abap/files_in_sap.html
http://abap4.tripod.com/SAP_Tables.html
http://www.geocities.com/sapcircle/Relations.pdf
regards,
indranil -
Customer aging analysis report layout
hi experts,
i have a client that needs the aging report to display in the following way. when doing an aging analysis for one month, all previous months invoices should be aggregated in one line as an opening balance. Then the invoices for the aging month should be listed under that opening balance and the aging schedule below should age the total of opening balance and the month's invoice. The way SAP Business One does the aging is such that EITHER the opening balance is displayed + the month's invoices but the aging schedule below is for that month's invoices only OR it lists all the invoices relating to that customer existing in the system and does the aging of the total invoices.
is there a way to generate the aging report as required above?
Regards,
DavidHi David,
I am afraid you have to create your own version of the report for this specif requirement. To match the system report values exactly would be a great challenge if you haven't create hundreds of query reports already.
Thanks,
Gordon -
Query to get Supplier Aging Analysis on AP
Hi all,
This seems like a common question. But i haven't found a solution yet. Does anyone have a query which i can use to create a Supplier Aging Analysis for R12?
The application can give me a report for any backdated date which lists all the suppliers, with their total outstandings as at that date along with what transactions make up that outstandings. I need to create an aging report for this exact report.
Any help is much appreciated
Thanks
MirangaTry this:
Your technical person should help you pass the values for bind variables
SELECT v.vendor_name C_VENDOR_NAME,
v.segment1 C_VENDOR_NUMBER,
decode(upper(:P_SORT_OPTION), 'VENDOR NAME',decode(:C_VENDOR_NAME_SELECT, '%',upper(v.vendor_name), v.vendor_name), i.invoice_type_lookup_code) C_PRIMARY_BRK,
decode(upper(:P_SORT_OPTION), 'VENDOR NAME',decode(:C_VENDOR_NAME_SELECT, '%', decode(:SORT_BY_ALTERNATE, 'Y', upper(v.vendor_name_alt), upper(v.vendor_name)),
decode(:SORT_BY_ALTERNATE, 'Y', v.vendor_name_alt, v.vendor_name)), i.invoice_type_lookup_code) C_PRIMARY_BRK_REAL,
v.vendor_name C_SHORT_VENDOR_NAME,
v.vendor_id C_VENDOR_ID,
i.vendor_site_id C_CONTACT_SITE_ID,
vs.vendor_site_code C_VENDOR_SITE_CODE,
decode(:SORT_BY_ALTERNATE, 'Y', vs.vendor_site_code_alt, vs.vendor_site_code) C_VENDOR_SITE_CODE_BRK,
nvl(vs.state,' ') C_VENDOR_STATE,
nvl(substr(vs.city,1,15),' ') C_VENDOR_CITY,
ps.payment_num C_REFERENCE_NUMBER,
i.vendor_site_id C_ADDRESS_ID,
nvl(substr(i.invoice_type_lookup_code,1,20), ' ') C_INVOICE_TYPE,
i.invoice_id C_PAYMENT_SCHED_ID,
-- RM nvl(to_char(ps.due_date,'DD-MON-RR'),' ') C_DUE_DATE,
nvl(to_char(decode(:P_AGING, 'Due Date', ps.due_date, i.invoice_date),'DD-MON-RR'),' ') C_DUE_DATE,
/* Bug: 1549982 */
/* Bug 2083419 For foreign currencies, show amounts in functional currency */
/* decode(i.invoice_currency_code,:C_BASE_CURRENCY_CO DE, decode(:C_BASE_MIN_ACCT_UNIT, 0,round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) *nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT), decode(i.exchange_rate,NULL,0, decode(:C_BASE_MIN_ACCT_UNIT,
0,round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT))) C_AMT_DUE_REMAINING,
decode(i.invoice_currency_code,:C_BASE_CURRENCY_CO DE, decode(:C_BASE_MIN_ACCT_UNIT, 0,round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT), decode(i.exchange_rate,NULL,0, decode(:C_BASE_MIN_ACCT_UNIT, 0,round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT))) C_AMT_DUE_ORIGINAL, */ -- ps.gross_amount C_GROSS_AMOUNT,
i.invoice_currency_code C_INVOICE_CUR_CODE,
i.payment_cross_rate C_PAYMENT_CROSS_RATE,
i.cancelled_amount C_CANCELLED_AMOUNT,
i.accts_pay_code_combination_id C_VENDOR_TRX_ID,
i.invoice_num C_INVOICE_NUMBER,
i.invoice_num C_INVOICE_NUM_SHORT,
to_char(i.invoice_date,'DD-MON-RR') C_INVOICE_DATE,
-- ceil(to_date(to_char(sysdate,'DD-MON-RR')) - decode(:P_AGING, 'Due Date', ps.due_date, i.invoice_date)) C_DAYS_PAST_DUE, -- Commented for MCR 52037
ceil(to_date(to_char(:P_AS_OF_DATE,'DD-MON-RR')) - decode(:P_AGING, 'Due Date', ps.due_date, i.invoice_date)) C_DAYS_PAST_DUE, -- Added for MCR 52037
decode(i.invoice_currency_code, :C_BASE_CURRENCY_CODE, ' ', decode(i.exchange_rate, NULL,'*', ' ')) C_DATA_CONVERTED,
nvl(i.exchange_rate, 1) C_EXCHANGE_RATE,
decode(:C_VENDOR_NAME_SELECT, '%',decode(:SORT_BY_ALTERNATE, 'Y', upper(v.vendor_name_alt), upper(v.vendor_name)),
decode(:SORT_BY_ALTERNATE, 'Y', v.vendor_name_alt, v.vendor_name)) C_VENDOR_NAME_BRK,
decode(:p_seq_numbers, 'N', i.voucher_num, i.doc_sequence_value) VOUCHER_NUMBER
FROM ap_payment_schedules ps,
ap_invoices i,
ap_suppliers v,
po_vendor_sites vs
WHERE i.invoice_id = ps.invoice_id
AND i.vendor_id = v.vendor_id
AND i.vendor_site_id = vs.vendor_site_id
&P_VENDOR_PREDICATE
&KCI_BUILD_WHERE
AND ((TO_DATE(:P_AS_OF_DATE) - ps.due_date)
between :C_MINDAYS and :C_MAXDAYS)
AND i.invoice_type_lookup_code like :C_INVOICE_TYPE_SELECT
-- Added for MCR 52037
AND nvl((select min(accounting_date) from ap_invoice_distributions where invoice_id = i.invoice_id),to_date(i.gl_date) ) <= TO_DATE(:P_AS_OF_DATE)
and ( ( i.cancelled_date is not null and i.cancelled_date > to_date(:P_AS_OF_DATE))
or (i.cancelled_date is null and ( nvl((select sum(amount) from apps.ap_invoice_distributions d where invoice_id = i.invoicE_id and d.accounting_date < TO_DATE(:P_AS_OF_DATE)),ps.gross_amount))-
nvl((select sum(amount) from apps.ap_invoice_payments p where p.invoice_id = i.invoice_id and p.accounting_date < TO_DATE(:P_AS_OF_DATE)),0)!= 0))
&P_AMOUNT_PREDICATE
--AND i.payment_status_flag in ('N','P')
&P_ORDER_BY
Hope it helps!
Regards,
Yuvaraj -
Hi All,
I have to create a Age analysis report for FI documents
which have line items with posting key 75 & 70 (Asset)
Given logic is
1 Selection screen has parameters - Company code, Key date
2 Need to take all line items with posting key 70 & 75
(BSEG-BSCHL = 70 or 75)
Layout of report is
Asset no 0-30 31-60 61-90 91-120 . 151-360 (days)
80000003 2000.00 3000.00 1000.00 4000.00 7000.0
80000006 1000.00 5000.00 300.00 5000.00 4000.0
Local curency amount should be categorised under the days
diferences between key date (selection screen) & posting date
of the accounting document.
My problem is,
Posting date of the document is not in the BSEG table. It is
in the BKPF table.Therefore I have to extract all FI documents(Not only documents with posting key 75 or 70) within 360 days from Key date in BKPF the table.
I cannot join BSEG & BKPF. Because, BSEG table is a cluster table.
Can you please tell me the way how can i extract the data for this report with out any performance issues.
PraGreat idea, but I dont think it is going to work.
The 1st problem should be, how do you work out the key date... You will need some good code for that.
Have a look at the customer aged debt reports for some help.
After that, if you just want asset documents, do they have their own unique document type, if so, you could use the doc type from BKPF to reduce the number you want to select in BSEG.
Have you looked at any of the standard Asset dep reports, perhaps there is something there you could use. -
Vendor Ageing Analysis Report for the postings for this fiscal year
Hi All,
I require report that lists every supplier that my company has spent money in this fiscal year, need the actual average payment terms, number of days etc. And also how much has been spent with each supplier.
Kindly let me know the report or the process to extract this data from SAP R/3 system.Regarding Ageing analysis of Vendor below three reports may meet your requirements provided transactions to the vendors are done in disciplined manner.
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
S_ALR_87012085 - Vendor Payment History with OI Sorted List
Regards,
Alok -
Aging Analysis report for open Items in SD
Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
RajThere are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan -
Can using query create aging report for GL Account
Hi all expert,
I have a challenge scenario which customer request print out aging report for the following GL Account.
This is not a business partner account. However, customer want display like aging report.
30 days aging report for the following GL accounts by projects:-
i) WIP (Work In Progress) account
ii) Accrued Revenue account
iii) Accrued Cost account
Examples:
Current Balance 30 day 60 day 90 day 120 day
Account WIP 10000 2000 3000 5000 0
Any idea or example given? If yes, can you provide a query here?
Regards,
Eric TanHi Eric
In standard SAP Business One this is difficult as the reports are 2 dimensional. To achieve this you will need to write multiple select statements into a temporary table and then select the final result from the temp table. Here is a sample for you to test:
USE [*DATABASE_NAME*]
GO
/****** Object: StoredProcedure [dbo].[REPORT_NAME] Script Date: 04/24/2009 13:17:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE proc [dbo].[*REPORT_NAME*]
as
set nocount on
begin
DECLARE @Day_no varchar(2)
DECLARE @Month_no varchar(2)
DECLARE @Year_no varchar(4)
DECLARE @Start_Date Datetime
SET @Day_no = DAY(GetDate())
SET @Month_no = MONTH(GetDate())
SET @Year_no = YEAR(GetDate())
SET @Start_Date = @Year_No + '/' + @Month_no + '/' + @Day_no -- + '/' + @Year_No
IF OBJECT_ID(N'tempdb..#CRDAGEING', N'U') IS NOT NULL
drop table #CRDAGEING
SELECT T0.[CardCode] AS [CardCode], T0.[CardName] AS [CardName], -T0.[Balance] AS [Balance], CAST(0 AS MONEY) AS [Current], CAST(0 AS MONEY) AS [1Week], CAST(0 AS MONEY) AS [2Weeks], CAST(0 AS MONEY) AS [3Weeks], CAST(0 AS MONEY) AS [4Weeks], CAST(0 AS MONEY) AS [5Weeks], CAST(0 AS MONEY) AS [6Weeks], CAST(0 AS MONEY) AS [Over6Weeks], CAST(0 AS MONEY) AS [Avg3Months], CAST (0 AS MONEY) AS [Onhand] INTO #CRDAGEING FROM OCRD T0 WHERE T0.[CardType] = 'S' -- and T0.[CardCode] <> '' --and T0.[DocDate] >= @FromDate AND T0.[DocDate] <= @ToDate
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] <= @Start_Date GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] >= DATEADD(DAY,1,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,8,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,8,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,15,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,15,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,22,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,22,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,29,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,29,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,36,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,36,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,43,@Start_Date) GROUP BY T1.[ShortName]
INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,43,@Start_Date) GROUP BY T1.[ShortName]
SELECT SR.[CardCode], MAX(SR.[CardName]), SUM(SR.[Balance]) AS [BalanceOwing], SUM(SR.[Current]) AS [Current], SUM(SR.[1Week]) AS [1Week], SUM(SR.[2Weeks]) AS [2Weeks], SUM(SR.[3Weeks]) AS [3Weeks], SUM(SR.[4Weeks]) AS [4Weeks], SUM(SR.[5Weeks]) AS [5Weeks], SUM(SR.[6Weeks]) AS [6Weeks], SUM(SR.[Over6Weeks]) AS [Over6Weeks] FROM dbo.#CRDAGEING SR GROUP BY SR.[CardCode] ORDER BY SR.[CardCode]
END
Go to Microsoft SQL Studio manager and select your company database. Then expand the list and select Programmability > Stored Procedures. Right click on Stored Procedures and select New Stored Procedure. Copy the above code over the code in the edit window and change the database name as well as report name. Then select Execute to create the stored procedure. If you make changes, remember to change the word CREATE to ALTER (with other words CREATE for the first execute, and ALTER thereafter). Then in SAP Business One create a new query and leave everything blank. Click on execute and select the pencil to change to edit mode. Remove the words SELECT and type in EXEC REPORT_NAME (change the REPORT_NAME to the name you used in SQL). Then execute again and the results will be displayed in SAP Business One.
Let me know if you get stuck. Remember the above is an example and will need to be changed to use your tables and fields as required. The basic idea is to move across by one column with each select statement. So for example the first select statement does the CURRENT column, the second one the 30DAYS column, and so on.
Kind regards
Peter Juby
Maybe you are looking for
-
Issue in treeview control along with page viewer web part showing the sub sites from MMS
hi, Am having a treeview control populates with values from MMS - Managed Metadata Service. [ Products ] ----->ms office ----->word ----->excel ---->powerpoint -------->Collaboration ----> sh
-
Problem when recording from the AUX phono output using creative x-fi elite
Hello everyone?Hopefully someone will be able to help me out here, as I've tried everything, however nothing seems to work. I am using the x-fi elite pro on a windows vista ultimate PC. When recording analogue material, from a tape Dec, for instance,
-
Is there a way to turn off Faces, or otherwise disable the facial recognition function in iPhoto?
-
my iPhone 4 has just shut down. Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge. Any suggestions? I did download a ringtone app and went on to iTunes to sync!.
-
Logical standby problem on primary DB updates
Hi all! I am quite new to standby databases, but I managed to sucessfully setup logical standby (11g on linux). However, I got some problem - when I try to insert some data into Primary DB using simple JDBC statements, I sometimes get exception: java